Send mail with FB4+BlazeDS+remoting service java

Hi,
I would like send email with remoting service in BlazeDS but when i import the service i get and error.
Thank!!

Maximus502 wrote:
how to fix that can you help,,,plzzzz.Google? Which suggests that you should stop using a SOCKS server that doesn't exist. Or use the correct address/port.
Which means I accomplished in roughly 11 seconds what you couldn't do in 13 days. Although my keyboard isn't horribly, horribly broken so I guess that's one advantage for me.
[http://forums.sun.com/thread.jspa?threadID=5321250]

Similar Messages

Setting mail with Cox (or other services with different servers for pop and smtp)

My Cox mail account uses different servers for pop and smtp (my personal ISP 1&1 does too).
The mail applet on my Blackberry Curve 8330 with Verizon does not allow to define different servers for pop and smtp, and further, for SSL smtp mail, the port is fixed at 995 and cannot be changed, while Cox (and 1&1) want to use 587 or something like that.
As a result, I can only receive mail with these services.
I also have yahoo mail, which works fine, so I can send mail with it and it is not a life-and-death situation, but I would like to be able to just reply to email sent to my Cox address.
I called Verizon and they said BlackBerry provides the mail access through their servers and the applet, so there is nothing they can do.
Is there a way to set it such that I can not only receive but also send mail through either of these services?
Thanks in advance,
Didier
PS: Other than that, the Curve on Verizon rocks!!! so much better down here than AT&T it's not even funny.

OK, thank you for the input.
The problem I have with this solution is like the one I have now using yahoo.
There are 2 problems:
1) mailing lists want the mail to come from the account that is subscribed, so if the cox account is subscribed, I can't contribute from the blackberry, and if the blackberry account is subscribed, I don't get my mail in Outlook. Neither is good for me.
2) people who send me mail to the Cox account and get replies from me from the blackberry continue responding to the account that can send from the blackberry (not Cox), and from that point on I do not have that mail on the computer.
The issue of having two copies is no big deal, I just delete the mail I do not need. I would rather have two than none.
Really, Blackberry should modify the email service so that they directly support mail systems like those of Cox and 1&1. I am sure there are others. They should also allow the use of another port for SSL than 995. I have not seen anyone using 995 for SSL.
Until recently, I had a BB provided by my employer, and we had a BES, and that worked really well. I would like to emulate as much of that functionality as possible without having to pay somebody another $10 or $20 a month just for the priviledge of having an account on a private BES server.
Anyway, thanks for the exchange and suggestions.
Didier

Send Mail with Multiple Attachment

How to send mail with multiple attachment. The documents are in a table column BLOB. Read and attach in to mail directly.
We dont want save the documents into hard disk and attach to mail. Please Help
If you have java procedure or Pl/Sql Procedure. I think pl/sql cant. So please mail me code to [email protected] mail id. Thank you.
Thanks in advance
Selvam

Hi all
Thanks for your reply, already tried this methods, Its not working for my requirements. Because my attachment is can be any type like pdf,doc,txt,xls,jpg,.
And also the Utl_mail is very slow. Its using RAW type.
I can use the javamail package to solve this problem, this javamail package needs to download into server from there you can attach thus documents into mail. But I want fetch the documents and ate the same time I want attach to a mail. Like yahoo attach or msn attachment.
Thank you,
Selvam

Sending mail with multiple attachments

hi.I wrote a code to send mail.but i need to send mail with multiple attachments.here is the code i wrote.what should i do to send the mail with multiple attachments.if i run this code iam able to send mails but not attachments.please help me
<%@ page import="javax.mail.*,javax.mail.internet.*,java.util.Date,java.io.*,java.net.InetAddress,java.sql.*,java.util.Properties,java.net.*,javax.sql.*,javax.activation.*,java.util.*,java.text.*" %>
<%@ page import="java.io.*,java.sql.*,java.net.*,java.util.*,java.text.*" %>
<%
     String Attachfiles1="";
     String Attachfiles2="";
String Attachfiles3="";
if("Send".equalsIgnoreCase("send"))
          try
     String subject="",from="",url = null,to="";
     String mailhost = "our local host";
     Properties props = System.getProperties();
     String msg_txt="";
     String strStatus="";
// byte[] bin=.....;
//Adds Attechment:
Multipart multipart = new MimeMultipart();
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Here are my attachments");
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
//first attachment
DataSource source = new FileDataSource("C:\\img1.jpg");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("C:\\Telnor1.jpg");
multipart.addBodyPart(messageBodyPart);
//Second attachment
DataSource source2 = new FileDataSource("C:\\img2.jpg");
messageBodyPart.setDataHandler(new DataHandler(source2));
messageBodyPart.setFileName("C:\\Telnor2.jpg");
multipart.addBodyPart(messageBodyPart);
//etc...
message.setContent(multipart);
Transport.send( message );
String mailer = "MyMailerProgram";
to=request.getParameter("to");
from=request.getParameter("from");
subject=request.getParameter("subject");
msg_txt=request.getParameter("message");
props.put("mail.smtp.host", mailhost);
Session mailsession = Session.getDefaultInstance(props, null);
Message message = new MimeMessage(mailsession);
message.setFrom(new InternetAddress(from));
message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to, false));
message.setSubject(subject);
message.setHeader("X-Mailer", mailer);
message.setSentDate(new Date());
message.setText(msg_txt);
BodyPart messageBodyPart = new MimeBodyPart();
BodyPart messageBodyPart2 = new MimeBodyPart();
Multipart multipart = new MimeMultipart(); // to add many part to your messge
messageBodyPart = new MimeBodyPart();
javax.activation.DataSource source = new javax.activation.FileDataSource("path of the file");
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName("file_name");
messageBodyPart2.setText("message"); // set the txt message
multipart.addBodyPart(messageBodyPart);
multipart.addBodyPart(messageBodyPart2);
Transport.send(message);
out.println("Message Sent");
catch (Exception e)
e.printStackTrace();
if("Attachfiles".equalsIgnoreCase("attachfiles"))
Attachfiles1=request.getParameter("fieldname1");
Attachfiles2=request.getParameter("fieldname2");
Attachfiles3=request.getParameter("fieldname3");
%>
<html>
<body>
<div class="frame">
     <form action="Composemail.jsp" method="post">
          <b>SelectPosition:</b> <select name="cars" >
<option value="ABAP">ABAP
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select><br><br>
<table border="1" cellpadding="2" cellspacing="2">
<tr><th>Name</th>
<th>EmailId</th>
<th>ContactNumber</th>
<th>Position</th>
</tr>
<tr>
<td>
</td>
</tr>
</table><br>
<b>SelectUser :</b><select name="cars">
<option value="Administrator">Administrator
<option value="saab">Saab
<option value="fiat">Fiat
<option value="audi">Audi
</select>
<br>
<b>To :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="to" size="72"><br>
<b>From :</b>&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="text" name="from" size="72"><br>
<b>Subject :</b>&nbsp&nbsp&nbsp<input type="text" name="subject" size="72"><br>
<%=Attachfiles1%><br><%=Attachfiles2%><br><%=Attachfiles3%><br><br>
<b>Message:</b><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<textarea rows="10" cols="50" name="message">
</textarea> <br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname1" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname2" value="filename" size="50"><br><br>
<b>AttachedFile:</b>&nbsp<input type="file" name="fieldname3" value="filename" size="50"><br><br>
&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp<input type="submit" name="attachfiles" value="Attachfiles">
<center>
<input type="submit" name="send" value="Send" >
</center>
</form>
</div>
</body>
</html>

Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over.

Sending Mail with an Attachment

Hi
I'm trying to send mail with a PDF attached. I've been set up on exchange server 2007... Sending mail without an attachment works fine.
Was wondering if anyone knows if this is a known issue or if I'm simply doing something wrong. The attachment has sent fine using Outlook web access... So it's not a problem with our connection.
Cheers
Lucy

Ditto to the comments on configuring EWS to deal with larger attachments. The instructions to do this are, unfortunately, very confusing as some configuration items are in MB and some are in KB and some are in bytes!
I worked with our sys admins to get this running, I knew things were better when I could send large attachments with Entourage Web Services Edition. I am still having occasional problems with large attachments not being sendable with Mail.app. I am hoping that 10.6.1 might tweak something to fix this?
The link we used for information is here:
http://ministry-it.blogspot.com/2009/08/entourage-ews-attachment-limits.html
While you are at it, you may want to have them check attachment limits for Outlook Web Access (OWA) if you find yourself using that and get bitten by the same 5 MB limit issue. Note that OWA and EWS have separate settings and are changed in different ways!
http://technet.microsoft.com/en-us/library/aa996835.aspx
Good luck
-- Alex

Cannot send mail with mobile mail software

I have been trying to send mail with my mobile mail software on my AOL account and my mail won't got through, But when I click on my mobile web and access my AOL email that way it allows me to send mail with no problem. The problem started today, I have an lg env3 and the latest software version of the mobile mail.

From working with other customers, the best thing to do would be to remove the email account entirely from the Mobile Email program and re-add it. If the issue persists, remove the Mobile Email application altogether and redownload it. If it still persists even after that and all other data services are working such as the browser, My Verizon, etc. call AOL Mobile Support at 866-265-3019.
I hope this helps you. Let us know if it did.

Sending mail with authentication

Dear All,
I am trying to send mail with authentication. My Mail server requires username and password while sending mails from Netscape.
But when I am sending mail through java mail api, I can send email with wrong username and password.
Actually when I enable debug, I am getting the following prints.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG: SMTPTransport trying to connect to host "vkarthik.net.com", port 25
DEBUG SMTP RCVD: 220 vkarthik.net.com ESMTP Sendmail 8.12.5/8.12.5; Thu, 8 Jan 2004 21:04:59 +0530
DEBUG SMTP SENT: helo saravanakumar.net.com
DEBUG SMTP RCVD: 250 vkarthik.net.com Hello saravanakumar [192.168.4.50], pleased to meet you
DEBUG: SMTPTransport connected to host "vkarthik.net.com", port: 25
DEBUG SMTP SENT: NOOP
DEBUG SMTP RCVD: 250 2.0.0 OK
DEBUG SMTP SENT: mail from: <[email protected]>
DEBUG SMTP RCVD: 250 2.1.0 <[email protected]>... Sender ok
DEBUG SMTP SENT: rcpt to: <vkarthik>
DEBUG SMTP RCVD: 250 2.1.5 <vkarthik>... Recipient ok
Verified Addresses
vkarthik
DEBUG SMTP SENT: data
DEBUG SMTP RCVD: 354 Enter mail, end with "." on a line by itself
DEBUG SMTP SENT:
DEBUG SMTP RCVD: 250 2.0.0 i08FYxbY017757 Message accepted for delivery
I set mail.smtp.auth as true correctly.
When I browse through this forum I found that authentication is performed If we get debug prints as follows.
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth true
DEBUG: SMTPTransport trying to connect to host "smtp.mail.yahoo.com", port 25
DEBUG SMTP RCVD: 220 smtp011.mail.yahoo.com ESMTP
DEBUG: SMTPTransport connected to host "smtp.mail.yahoo.com", port: 25
DEBUG SMTP SENT: EHLO wva24-d9kzst01
DEBUG SMTP RCVD: 250-smtp011.mail.yahoo.com
250-AUTH=LOGIN PLAIN
250-PIPELINING
250 8BITMIME
DEBUG SMTP Found extension "AUTH=LOGIN", arg "PLAIN"
DEBUG SMTP Found extension "PIPELINING", arg ""
DEBUG SMTP Found extension "8BITMIME", arg ""
DEBUG SMTP: Attempt to authenticate
DEBUG SMTP use AUTH=LOGIN hack
DEBUG SMTP SENT: AUTH LOGIN
DEBUG SMTP RCVD: 334 VXNlcm5hbWU6
I guess the following statement is missing in my case.
DEBUG SMTP: useEhlo true, useAuth true
Could You please let me know why I am not getting this? Am I doing something wrong in my code?
Or it is a problem in the mail server?
Thanking you,
Saravanakumar

Hi Sravankumar,
Can you please let me know the Version of the JDK which you used earlier, which had those old mail.jar & activation.jar files through which you were able to send mails without SMTP authentication.
Another thing which I wanted to know from you is that were the mails reaching the destination. I want to make sure about this since,even though SMTP Authentication at the client side is disabled, if the SMTP Mail Server does not accept invalid Email IDs as userIDs, then I guess we will not be able to send mails. Please clarify on this.
My requirement is that I want to send mails without a valid User Login through that SMTP Mail Server.
If possible also please send across the piece of code which does the same
Regards,
Madhukar KR

Send mail with attachment from the uploaded file

hi,
From a form thread i got the following code to send mail with attachment with the file uploaded from the file upload ui element.
public void onActionLoadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionLoadFile(ServerEvent)
     WDWebResourceType FileType = null;
     String FileName = new String();
          //get attribute info for context attribute 'FileUpload'
          IWDAttributeInfo attributeInfo =
               wdContext.getNodeInfo().getAttribute(
                    IPrivateEmailView.IContextElement.FILE_UPLOAD);
          //get modifiable binary type from the attribute info,requires type cast.
          IWDModifiableBinaryType binaryType =
               (IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
          IPrivateEmailView.IContextElement element =
               wdContext.currentContextElement();
          //if a file in the 'FileResource' attribute exists
          if (element.getFileUpload() != null) {
               try {
                    String mimeType = binaryType.getMimeType().toString();
                    byte[] file = element.getFileUpload();
                    //get the size of the uploaded file
                    element.setFileSize(this.getFileSize(file));
                    //get the extension of the uploaded file
                    element.setFileExtension(binaryType.getMimeType().getFileExtension());
                    //NOTE: context attribute 'FileName' must not be set
                    //because the FileUpload-UI-element property 'fileName'
                    //is bound to it. Consequently the fileName is automatically
                    //written to the context after file upload.
                    //report success message
                    wdComponentAPI.getMessageManager().reportMessage(
                    IMessageEmailComp.SF_UPLOAD,
                         new Object[] { binaryType.getFileName()},
                         false);
                    FileType = binaryType.getMimeType();
                    FileName = binaryType.getFileName();
               } catch (Exception e) {
                    throw new WDRuntimeException(e);
          //if no file in the 'FileResource' attribute exists
          else {
               //report error message
               IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
               msgMgr.reportContextAttributeMessage(
                    element,
                    attributeInfo,
                    IMessageEmailComp.NO_FILE,
                    new Object[] { "" },
                    true);
          //clear the FileResource context value attribute
          //element.setFileUpload(null);
          String URL;
          URL = this.CreateAndGetPathFileUpload(
                              wdContext.currentContextElement().getFileUpload(),
                                                  FileName);
//          if (URL.length() == 1){
//               //ERRORE
     wdContext.currentContextElement().setPATHFileUploaded(URL);
    //@@end
public boolean send( java.lang.String subj, java.lang.String mess, java.lang.String dest, java.lang.String attach, java.lang.String FileName )
    //@@begin send()
     InitialContext ctx = null;
     Address[] address = null;
     Message msg = null;
     Session sess = null;
     MimeBodyPart bodyPart = null;
     Multipart mp = null;
     // "141.29.193.71" == milvl2ja.icn.siemens.it (SMTP di Siemens)
       try {
          Properties props = new Properties();
          props.put("domain","true");
          ctx = new InitialContext(props);
          sess = (Session) ctx.lookup("java:comp/env/mail/MailSession");
          msg = new MimeMessage(sess);
          IWDClientUser utente = WDClientUser.getCurrentUser();
          String senderEmail = utente.getSAPUser().getEmail();
          InternetAddress addressFrom = new InternetAddress(senderEmail);
          msg.setFrom(addressFrom);
          String EmailDEST = dest;
          InternetAddress addressTo = new InternetAddress(EmailDEST);
          msg.setRecipient(Message.RecipientType.TO, addressTo);
          msg.setSubject(subj);
//          if ((mess != null) && (mess.length()>0)) {
//                 msg.setContent(mess, "text/plain");
//            } else {
//                 msg.setContent("", "text/plain");
          //Gestione ATTACHMENT...
          String attachedFileName = new String(wdContext.currentContextElement().getFileName());
          boolean hasAttachment = (attachedFileName != null) && (attachedFileName.length() > 0);
          boolean isMultiPart = (mess != null) && (mess.length() > 1);
          //adding an attachment makes the message multipart
             if (isMultiPart || hasAttachment) {
                mp = new MimeMultipart();
                // add text parts
                  if (mess != null) {
                     for (int i = 0; i < mess.length(); i++) {
                       bodyPart = new MimeBodyPart();
                       bodyPart.setContent(mess,"text/plain");
                       mp.addBodyPart(bodyPart);
                //attach the file to the message if needed
                if (hasAttachment) {     // avoid the case with no text parts
                     bodyPart = new MimeBodyPart();
                       bodyPart.setContent("Allegato incluso nel messaggio.","text/plain");
                       mp.addBodyPart(bodyPart);
                       // the part with the file
                       FileDataSource fds = new FileDataSource(attach);
                       MimeBodyPart attachmentBodyPart = new MimeBodyPart();
                    attachmentBodyPart.setDataHandler(new DataHandler(fds));
                    //URL URLattachedFileName = new URL(attach);
                    //attachmentBodyPart.setDataHandler(new DataHandler(URLattachedFileName));
                       attachmentBodyPart.setFileName(FileName);
                       mp.addBodyPart(attachmentBodyPart);
                msg.setContent(mp);
             } else {
                if ((mess != null) && (mess.length() > 0)) {
                     msg.setContent(mess, "text/plain");
                } else {
                     msg.setContent("", "text/plain");
          //fine ATTACHMENT
          msg.setSentDate(new GregorianCalendar().getTime());
          msg.saveChanges();
          address = msg.getAllRecipients();
          Transport.send(msg, address);
       } catch (Exception e) {
             e.printStackTrace();
             return false;
       return true;
    //@@end
When i used the same code in my application i am gett ing error in many places..
1)FileDataSource fds = new FileDataSource(<b>attach</b>);
attach cannot be resolved
2)attachmentBodyPart.setFileName(<b>FileName</b>);
fliename cannot be resolved
3)byte[] file = element.getFileUpload();
type mismatch cannot convert sting to byte[]
4)element.setFileSize(this.getFileSize(file));
method getFileSize() is undefined
5)element.setFileExtension(binaryType.getMimeType().getFileExtension());
method getFilExtension() is undefined
6)URL = this.CreateAndGetPathFileUpload(wdContext.currentContextElement().getFileUpload(),FileName);
method CreateAndGetPathFileUpload() is undefined.
7)wdContext.currentContextElement().setPATHFileUploaded(URL);
from the above error i can understand that only i have got the part of the code.
Please send me the complete coding.
some method definitions are missing....
Please help me to send the mail with attachment from the file uploaded from the file upload ui element.
Thanks in advance,
shami.

hi,
I got this from the following link
Re: Attaching an excel file
plz help me ...
I am using 2004s with nwds 7.0.06.
also tell me what should be the type of the context variable FileUpload
Thanks in advance,
shami.

Sending mail with multiple attachment

hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
       jobname like TBTCJOB-JOBNAME,
       L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4)    VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
        p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_desc1 TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des,
      gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
        p_email like somlreci1-receiver,
      END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
      ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
                       to sap-spool
                      with line-size = '255'
                       with KEEP_IN_SPOOL = 'X'
                       with IMMEDIATELY = ' '
                       WITHOUT SPOOL DYNPRO
                       AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf.
    select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
      from ymail
      where ytcode = 'YMIS008'.
ELSE.
   SKIP.
   WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
           'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
                            USING SELECTION-SET 'MAIL'
                            to sap-spool
                           with KEEP_IN_SPOOL = 'X'
                           with IMMEDIATELY = ' ' "SPACE
                           WITHOUT SPOOL DYNPRO
                           AND RETURN
   NEW-PAGE PRINT ON
   DESTINATION l_c_device
   IMMEDIATELY ' '
   KEEP IN SPOOL 'X'
   NEW LIST IDENTIFICATION 'X'
   NO DIALOG.
   new-page print off.
    IF sy-batch EQ 'X'.
    gd_attachment_desc1 = 'YMIS10'.
    gd_mtitle = 'Monthly Sales Report'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
    PERFORM convert_spool_to_pdf1.
   loop at it_mess_att.
    move it_mess_att1 to it_mess_att.
    APPEND it_mess_att.
   endloop.
   APPEND LINES OF it_mess_att1 to it_mess_att.
   free it_mess_att1.
    it_mess_att[] = it_mess_att1[].
    insert LINES OF it_mess_att1 into it_mess_att.
    APPEND LINES OF it_mess_att2 to it_mess_att .
     insert LINES OF it_mess_att1 into it_mess_att.
     insert LINES OF it_mess_att2 into it_mess_att.
   loop at ymis008tab into mailstr.
     p_email1 = mailstr-p_email.
      p_email1 = '[email protected]'.
       PERFORM process_email.
   endloop.
       clear mailstr.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
ELSE.
    SKIP.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att1 = gd_buffer.
    APPEND it_mess_att1.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = ' '.
APPEND it_mess_bod.
it_mess_bod        = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod        = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                      it_mess_att1
                                using "p_email
                                      gd_mtitle
                                     'Testing mail generated from SAP'
                                     'Daily Highlights Abstract Report - YPP18'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                          it_attach1
                                    using "p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
   a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name   = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X   "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
   CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
Arpit

Hi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John.

How to send mail with attachments - ALBPM 5.7

Hi All,
I am new to BPM,
Someone could help giving me a example of Send Mail with attachments in Aqualogic Studio 5.7?
thanks,
Renata

nombrefichero="C:\\Temp\\test.doc"
subject as String="Subject"
message as String="Message"
mailAttachment = Fuego.Net.MailAttachment(source : BinaryFile.readToBinaryFrom(name : nombrefichero), fileName : "test2.doc")
mailAttachments[0] = mailAttachment
correo as Mail
correo.attachments = mailAttachments
correo.contentType = "text/html"
send correo
using from = "[email protected]",
recipient = "[email protected]",
subject = subject,
message = message

Sending mail with attachment fails on MAC Mail and WRP400.

Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.

The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks.

Sending mail with excel attachment-improper format

Dear experts,
I am sending a mail to outlook with an excel attachment. The mail is sent with attachment and the data, but all in one cell.
I am using SO_NEW_DOCUMENT_ATT_SEND_API1. What parameters do i need to manipulate to have data in different columns of excel? I am using "packing_list" table of FM. But dont know the exact parameters to be passed. Can anyone help with the same please?
Best regards and thanks!
Sumit Nene.

Hello Sumit,
I am using same function module to send mail with excel attachment.
Below I am attaching my own code for your reference.
Data which u want to add in excel file is maintain in IT_OBJBIN i.e. document information.
CLEAR :IMESSAGE,IT_OBJBIN,IT_OBJPACK,IT_RECLIST.
REFRESH: IMESSAGE[ ] , IT_OBJBIN[ ] , IT_OBJPACK[ ] , IT_RECLIST[ ].
" populate the text for body of the mail
CLEAR WA_IMESSAGE.
CONCATENATE    'Board : ' P_BOARD ':' 'Please find the excel attached for the list of Material whose routing is created'   INTO WA_IMESSAGE-LINE.
APPEND WA_IMESSAGE TO IMESSAGE.
"document information
W_DOC_CHNG-OBJ_NAME = 'Excel'.
IF NOT P_BOARD IS INITIAL.
    CONCATENATE    'Board : ' P_BOARD ':' 'List Of Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ELSE.
    CONCATENATE     'List Of' ' Routing Materials' INTO W_DOC_CHNG-OBJ_DESCR.
ENDIF.
W_DOC_CHNG-SENSITIVTY = 'F'. " ->Functional object
" displaying material , plant in the excel
CONCATENATE 'BOARD NO : ' P_BOARD INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CONCATENATE 'MATERIAL' 'PLANT' 'DESCRIPTION' INTO WA_OBJBIN SEPARATED BY C_TAB.
CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
APPEND WA_OBJBIN TO IT_OBJBIN.
CLEAR : WA_OBJBIN.
LOOP AT IT_DOWNLOAD INTO WA_DOWNLOAD. "It_orders is the internal table to be transferred to excel
    CONCATENATE WA_DOWNLOAD-MATNR WA_DOWNLOAD-WERKS WA_DOWNLOAD-DESC INTO WA_OBJBIN SEPARATED BY C_TAB.
    CONCATENATE C_RET WA_OBJBIN INTO WA_OBJBIN.
    APPEND WA_OBJBIN TO IT_OBJBIN.
ENDLOOP.
DESCRIBE TABLE IT_OBJBIN LINES V_LINES_BIN.   " no of lines for excel data
" pack the data as RAW
CLEAR WA_IT_OBJPACK-TRANSF_BIN.                     "Obj. to be transported not in binary form
WA_IT_OBJPACK-HEAD_START = 1.                   "Start line of object header in transport packet
WA_IT_OBJPACK-HEAD_NUM = 0.                     "Number of lines of an object header in object packet
WA_IT_OBJPACK-BODY_START = 1.                   "Start line of object contents in an object packet
WA_IT_OBJPACK-BODY_NUM = MESSAGE_LINES.         "Number of lines of the mail body
WA_IT_OBJPACK-DOC_TYPE = 'RAW'.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" pack the data as excel
WA_IT_OBJPACK-TRANSF_BIN = 'X'.
WA_IT_OBJPACK-HEAD_START = 1.
WA_IT_OBJPACK-HEAD_NUM = 1.
WA_IT_OBJPACK-BODY_START = 1.
WA_IT_OBJPACK-BODY_NUM = V_LINES_BIN.         "no of lines of it_orders to give no of unprocessed orders
WA_IT_OBJPACK-DOC_TYPE = 'XLS'.   " -> excel fomat
WA_IT_OBJPACK-OBJ_NAME = 'EXCEL ATTACHMENT'.
" attachment name
IF NOT P_BOARD IS INITIAL.
    CONCATENATE P_BOARD '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ELSE.
    CONCATENATE 'LIST' '.XLS' INTO WA_IT_OBJPACK-OBJ_DESCR.
ENDIF.
WA_IT_OBJPACK-DOC_SIZE = V_LINES_BIN * 255.
APPEND WA_IT_OBJPACK TO IT_OBJPACK.
" creating email id
DATA: STR1 TYPE STRING,
      STR2 TYPE STRING,
      STR3 TYPE STRING,
      ITAB TYPE TABLE OF STRING.
DATA : WA_I LIKE LINE OF ITAB.
SPLIT P_EMAIL AT ',' INTO: TABLE ITAB.
e-mail receivers.
CLEAR WA_IT_RECLIST.
LOOP AT ITAB INTO WA_I.
    WA_IT_RECLIST-RECEIVER = WA_I.
WA_IT_RECLIST-RECEIVER = V_MAILADDR.
    WA_IT_RECLIST-EXPRESS = 'X'.
    WA_IT_RECLIST-REC_TYPE = 'U'. "-> Internet address
    APPEND WA_IT_RECLIST TO IT_RECLIST.
    CLEAR WA_IT_RECLIST.
ENDLOOP.
" sending mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA                    = W_DOC_CHNG
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   IMPORTING
     SENT_TO_ALL                      =
     NEW_OBJECT_ID                    =
    TABLES
      PACKING_LIST                     = IT_OBJPACK
     OBJECT_HEADER                    =
     CONTENTS_BIN                      = IT_OBJBIN
     CONTENTS_TXT                      = IMESSAGE
     CONTENTS_HEX                     =
     OBJECT_PARA                      =
     OBJECT_PARB                      =
      RECEIVERS                        = IT_RECLIST
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
COMMIT WORK.
IF SY-SUBRC = 0.
    MESSAGE I001 WITH 'Routing is Created for Board' P_BOARD 'and Mail send on e-mail id :' P_EMAIL.
ENDIF.

Sending mail with multiple attachments in jsp

hi .I wrote a code to send a mail in jsp.but now i need to send mails with multiple attachments.how can i send mail with multiple attachment.

Create a separate MimeBodyPart object for each attachment, rather than reusing
the same one over and over.

Convert Script output data to Text(.txt) file & send mail with attachment.

Hi All,
Requirement: I shulb be able to conver th Script output data to Text(.text) file & send a maill with attachment with this text file. Formant of text file should be like output of Print priview.
Plese sugget with Function modules to cover as Text file.
I am able to converting the Script output data to PDF and sending mail with attachment. So I don't want PDF file now.
Thanks in advance.

Hi, Thanks for responst.
We can convert the Scirpt output to PDF file by using OTF function module and the PDF file looks like Print Privew output.
Same like this I want Script out in NOTEPAD (.txt). Is that possible, Plz sugget with relavent Function Modules.
Thanks.

Receiving mail, but can't send mail with attachments?

Hello,
I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word docs., but I a know the people who have send me such files do not have VISTA. When I choose "open with" then it works. So I have 2 problems, one being moe urgent then the other.
1) can't send mail with attachments
2) .doc (word), .pps (powerpoint)attachments are not always recognized.
thank you all!!!

Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

Send mail with FB4+BlazeDS+remoting service java

Similar Messages

Maybe you are looking for