Send message failure when Messages beta is installed

Did you know that in some cases, iMessage on your phone will have send message failures on both sides of the conversation when Messages beta is installed on your Mac? Messages doesn't even need to be running. As long as you have it installed and your computer is running, you'll get the send message failures. Happens to myself and two friends. Just tested this myself.

Hi,
Can you detail how this is repeatable ?
8:21 PM      Sunday; March 18, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
  iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

  • Error message occurs when I try to install Realtek HD Audio driver on Satellite M70

    Microsoft Bus Driver should be loaded in your system before installing Realtek HD Audio Driver
    This is the error message that I got when I tried to install the original Realtek drivers! Removed/installed the new WXP media center 2005, everything was fine but the modem and the sound, for the modem no problem but for the sound...(sight) I even downloaded new drivers on the internet and THEY WORKED!
    But when I try next time to open my computer I get all the time a blue screen then it shuts down? What is wrong? I got everything original and I followed the step. What should I do?
    By the way I got an Satellite M70 - 168 laptop.

    Hi
    Someone get this similar error message on his notebook OSs and according to the information the Microsoft patch should helps to sort it out.
    Found this useful knowledge base article:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;835221
    This document advice to install the KB835221 patch but that is only officially available by talking to Microsoft technical support!
    But dont worry buddy. The Google search engine is the key!
    Try to search for this KB835221 patch and Im sure you will find the right one!
    The required UAA drivers in the Microsoft documents are not included with XP SP2 or SP1, so it's a useful QFE to have around if you want to use newer sound cards like the Realtek HD Audio.
    PS: If the Q835221 didn't help then you can also try the updated driver from Microsoft Q888111 article, which has 4 versions depending on your OS and installed service pack.
    Good luck!
    Message was edited by: Jayjay

  • Error message -3001 when I try to install updates

    When I try to install updates, I get error message: update Quick Time can't be saved. A network error has occured. Cannot open file -3001. Make sure you can connect to the internet, then try again.
    My IMac has also been very slow to start up. The white screen stays on for several seconds before it finally turns on.

    Hi Sharon,
    /*Component Manager & component errors*/
      validInstancesExist           = -3001  This component has open connections.
    Not much help, but let's work on the slow startup first.
    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.

  • TS5376 For about 4 months now I have been getting an Apple I-Tunes update message but when I try to install it, the program stops and refuses to install it saying I need to go to tools and manually install. the support page says:1. Remove iTunes and relat

    Dear Windows support personel,
         As part of my message reads above; I keep getting an i-tunes update message and when I click on the OK to download it, I get an error message saying there was a problem and I need to go to Tools>manual download.  Well, I don't know how to do that even though I gave it my best try. I went to the support sight and it had the following message;
    1. Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or  only uninstalling some of these components, may have unintended affects.
    If you encounter an error while uninstalling, try repairing the affected component:
    I don't know if I should do that since I'm not PC savey. Could you help me by doing the work on my pc for me? I'd be most apprieciative if you'd help me in this manner.
    Sincerely,
    Christine Bocker
    <Email Edited by Host>

    Let's first try updating using an installer file downloaded from the Apple Website:
    http://www.apple.com/itunes/download/

  • Why are not  pop up  message window when message type I and W

    Hi All,
    I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description  and ABC indicator of material at saving point of PO if material is significant.
    code is properly working  but does not showing  error message window when I am using message type I  (information) or W (worming message) .
    if i am using message type E ( error message )then showing message window just link  Information message.
    So i can no understand why are not message window pop up  when i take message type I and W.
    my code is that
    method IF_EX_ME_PURCHDOC_POSTED~POSTED
    IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
      DATA : wa LIKE LINE OF IM_EKPO.
      DATA : VAR_MAKTX TYPE MAKT-MAKTX.
      DATA : VAR_MAABC TYPE MARC-MAABC.
      DATA : P TYPE STRING.
      DATA : P1 TYPE STRING.
      LOOP AT IM_EKPO INTO wa.
        SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
        SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
          IF VAR_MAABC EQ 'A'.
            P = 'is significant material'.
            CONCATENATE  WA-MATNR '(' VAR_MAKTX ')'  P INTO P1.
            MESSAGE P1 TYPE 'E'.
            EXIT.
            ENDIF.
      ENDLOOP.
    ENDIF.
    endmethod.
    guide me...............

    Hi vinod,
    thanks for reply......
    yes,  my  requirement is to show the popup window with  material number, material description and ABC indicator of material at saving point of PO if material is significant.
    I find Badi to transaction me21n at saving PO.  Badi ME_PROCESS_PO_CUST does not exist.
    so i am using Badi me_purchdoc_posted~posted.
    This Badi  ( me_purchdoc_posted~posted ) is properly working But showing message  "system error ( error in method po_post ) "
    when I am click on OK then automatic leave from transaction.
    guide me..........

  • Not showing  pop up message window when message type I and W

    Hi,
    My requirement is to show the popup message window with material number, material description and ABC indicator of material at Every line item of PO in Transaction ME21N , if material is significant.
    I find Badi to transaction me21n ME_PROCESS_PO_CUST~PROCESS_ITEM
    actually i want show only information about material.
    This Badi ( ME_PROCESS_PO_CUST~PROCESS_ITEM ) is properly working But does not showing Popup Message window
    when i am using Message Type  'I' or "W" .
    <Coding>
    method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
    BREAK-POINT.
    BREAK-POINT.
        IF  SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21' . " ) AND MEPO1211-werks IS NOT INITIAL. " AND IM_LGOBE IS INITIAL.
       BREAK-POINT .
      DATA : VAR_MAKTX TYPE MAKT-MAKTX.
      DATA : VAR_MAABC TYPE MARC-MAABC.
      DATA : P TYPE STRING.
      DATA : P1 TYPE STRING.
    DATA: ls_mepoitem1 TYPE mepoitem,
          ls_header_obj TYPE REF TO if_purchase_order_mm,
          ls_header   TYPE mepoheader,
          lc_werks(1) TYPE c,
          lv_fabkl    TYPE t001w-fabkl,
          lv_plifz    TYPE ekpo-plifz.
       *Get header data
      ls_header_obj = im_item->get_header( ).
      ls_header     = ls_header_obj->get_data( ).
    *Get Item Data
    ls_mepoitem1 = im_item->get_data( ).
        SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ ls_mepoitem1-matnr AND werks EQ    ls_mepoitem1-WERKS.
        SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ ls_mepoitem1-matnr.
          IF   VAR_MAABC EQ 'A'.   "LS_MEPOITEM1-SPINF EQ 'A'.
            P = 'is significant material'.
            CONCATENATE  LS_MEPOITEM1-MATNR '' '(' VAR_MAKTX ')'  '' P INTO P1.
           MESSAGE p1 type 'I' .   
            EXIT.
            ENDIF.
            ENDIF.
    endmethod.
    guide me.....

    Hi
    Please, see SAP Note 310154 - ME21N/ME51N: Customer-specific check, generating error log
    I hope this helps you
    Regards
    Eduardo

  • Why does flash player keep sending update requests when I have already installed latest version?

    Flash player keeps sending update requests and when I try to install it tells me I need to close internet explorer when it isn't open. How do I make it stop?

    Right click ANY flash content and choose "Global Settings" Under Advanced, you can check the version and set updating preferences.

  • I get an error message 1316 when I try to install adobe 9.3, why?

    I tried to install adobe reader 9.3
    several times. Each time I get an error message
    that reads: error 1316. A network error occurred while attempting to read from the file C
    Documents and settings.  Why? How do I fix this?

    You may have an earlier Adobe Reader installation that got corrupted.
    Remove all previous Adobe Reader installs using the Windows Installer CleanUp Utility, then try installing 9.3 again.

  • TS4009 I get error message 2349 when I try to install iCloud, what do I need to do?

    How do I fix this?

    I used Migration Assistant to migrate the applications to the new laptop which is a 3rd computer.
    Forget that part. The apps won't work. Adobe apps must be installed properly. That may well explain your issues with CS6, too. Generalyl, though, there is no need to uninstall older versions...
    Mylenium

  • Problem with a recent purchase, message appears when I try to install any app

    Help!

    You have the accessibility VoiceOver feature turned on.
    Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see:
    iPhone: Configuring accessibility features (including VoiceOver and Zoom)

  • Catastrophic failure when i try to install sb live drive

    i dont know why it wont work, i downloaded them from this site a few times before, and they always worked, now it wont install, just stops at setup and says catastrophic failure..can someone help me

    You downloaded drivers from this site? What happens when you use the original SB Li've install CD? (You may need to uninstall everything first.)

  • I keep getting a failure when I try to install new ilife 11 in my imac??

    I installed Mac OS X Snow Leopard successfully I believe, and iWork also. Included with the box set was iLife 11 whic I really want to use and I cannot get it to load. It fails when installing every time. I have iLife 09 already loaded on there from before, and I just want to update. I made sure all system requirements are met or exceeded and I have no issues there so I am thinking maybe it is the disc or something went wrong with the snow leopard update, but iWork installed with no problems at all.

    Hi - have a look at this thread: https://discussions.apple.com/thread/2696288?start=0&tstart=132 and look at Sandra Hall's post about deleting a Java folder. Looks like she had the same problem as you and managed to fix it.

  • Flash CS3 trial installation failure when Flash 8 Pro installed

    I am trying to install the trial version of Flash CS3 on my
    PC.
    The installation fails to install Flash CS3 or Shared
    Components. I currently have a fully licensed copy of Flash 8
    Professional installed on the same PC. Is there some reason I can't
    do this?
    I am trying to see if we want to upgrade to CS3 by checking
    out the improvements/features etc. Sure, I could go ahead and spend
    the $200 but we may not need the improvements.
    Presumably there would be no problem upgrading to CS3 and
    that the problem is caused by the fact I am trying to install a
    full version trial rather than an upgrade.
    Can anybody confirm that this is the case?
    One of the things I wanted to test with CS3 is the
    possibility of loading a Flex .swf into a Flash shell to be able to
    run as an executable. We are not currently in the market for AIR
    which will allow that. We are just trying to add the ability to run
    our code as a stand-alone.
    Any help/comments appreciated.
    TIA
    Colin

    Certain components install with no problem. Adobe Bridge CS3,
    Adobe Device Central CS3, Adobe ExtendScript Toolkit 2 and Adobe
    Flash CS3 Video Encoder are installed. But Flash itself and the
    Shared Components are not installed.
    The problem with AIR is that I would need CS3 installed to
    use it. So I can't check that out yet either :-(
    Colin
    quote:
    Originally posted by:
    dzedward
    1) Installing CS3 when having Flash 8 or previous versions
    already installed won't make a difference. Previous versions, which
    were owned by Macromedia, install in a Macromedia Folder, however,
    CS3 will install in an Adobe Folder, so, no conflict.
    2) AIR is free, so not being in the market makes no sense. It
    is an 'extension' to Flash CS3 or Flex or Dreamweaver, that can be
    downloaded.

  • Since installing iOS 7 messages randomly disappear from the message list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, send message and there are the messages.  'Fred' messages then re-appear in Message list. Why

    Since installing iOS 7 messages randomly disappear from the messages list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages.  'Fred' messages then re-appear in Message list. Why?  How to stop messages disappearing from message list?  Thoughts?

    Since installing iOS 7 messages randomly disappear from the messages list.  When I scroll through message from 'Fred' has disappeared. I go to 'Fred' in Contacts, go to send message and there are the messages.  'Fred' messages then re-appear in Message list. Why?  How to stop messages disappearing from message list?  Thoughts?

  • HT4623 When I go to install software update to my phone, it sends the message that I am not connected to the internet. what am I doing wrong?

    When I try to install software update to my phone, it sends the message that I am not connected to the internet. What am I doing wrong?

    Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region...change here.

Maybe you are looking for