Send Message retry

Recently I have started a new thread on an issue related to Java Card Applets and iPhones (iPhone 4S STK bug ? - unfortunately that thread has been closed by EJP, not allowing me to share the knowledge with you. :(
Actually the root cause is clearly a bug on the iPhone's chipset, however, the terminal response was 0x20. According to GSM 11.14, it is worth to retry the message if the response is '2X'. And guess what, it works fine on the 2nd attempt.
I don't understand why that thread was closed as it become a very popular issue (in some countries we have more than 50% iPhones on the network) as it is important to implement a retry mechanism on the send message proactive command. Hope that hint will help others to deal with this issue.

A few more details would really be helpful. Describe how this all comes about.

Similar Messages

When sending messages from my iPad its says cannot send message retry

my iPad is saying error retry when sending messages over to my friends

A few more details would really be helpful. Describe how this all comes about.

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

Wcf web service send port retry?

We are contacting external wcf web services. We don't control these services and they could be returning an exception for a short while (which is "ok"), so we need to retry for a given period of time, without suspending the orchestration/sendport.
It used to be simple with web services (.asmx) since the send port would handle the retries as soon as an exception was returned from the web services. With wcf services and the soap fault, it is much more cumbersome.
I know how to do it from an orchestration, but it does add a lot of clutter (have an extra "initialization" construct block so visual studio shuts up about the uninitialized message coming back from the wcf service, define documentspecnames in
our case, define xpath expressions for the fault and the expected response, have a loop, a delay, more variables/expressions, scope, exception block, etc. etc.) for such a simple requirement. We need to contact a couple of wcf services in an orchestration
and the handling of the retries makes it quite large and unfriendly (and this is mostly the retry logic for these wcf services).
So, is there any way to have the send port adapter handle the retries when receiving an exception from a wcf service like it used to be with regular web services?

Thanks for you answer, yes I understand that the SOAP fault is just another message and that I need to act accordingly in the orchestration. I'm not refuting that, I'm just looking for a better solution than the one I have now (which seems overly complicated
to me).
I have to specify the documentspecname because we use the built-in xmlreceive pipeline and the type of the exception that the wcf services return is standardized in our organisation... so there are many copies of the schema of this exception deployed on
the servers. I need to specify the schema of the exception coming from my wcf reference in my assembly otherwise I get the "I can't find the right schema blabla" exception.
Of course, if I can stop using the XMLReceive pipeline, I wouldn't have to specify the documentspecname... I'll have to research in detail what this pipeline is doing and see if I can replicate it's functionality, with the addition of the check for the error
in the returned message.
I just want to be sure before proceeding... If I raise an exception in a custom pipeline, the send port retry configuration would apply?

ABAP client proxy send message fialed

I developed one ABAP client proxy to send msg. status in SXMB_MONI is error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
After I test it in RWB,I'm sure that IR and ID is right. Then what's wrong?

> There are two scenarios with the same outbound interface.Is it the problem?
>
> ABAP proxy send message, and then there are two route.
Yes this could be the reason, because at the time of Receiver Determination it tries to send the message to both the interface. Are both the scenario Proxy to XI??
Try to change the Message Interface in IR and accordingly change in ID also and then try.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Oct 17, 2008 2:24 PM

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

Message Retry Count Zero error

Hi,
I am sending a Message from one Trading partner to another over ebMS protocol .
The trading partners are using Weblogic JMS queues as the internal delivery channels.
when one trading partner is sending message to another, the mesage comes to the receving trading partner with error as "Max retry count for Message is zero".
I have reffered to one of the thread (Re: FTP retry issue) which says "Can you please update the Retry count and time to acknowledge in the<br />Delivery channel page and update the polling interval in the transport<br />server page as empty? I think the Polling interval value overrides the<br />retry count."
I have followed this and I am getting a Transport Error.
Please Help!
With Thanks & Regards,
Suhas.

Hi,
This is the idc log:
2008.11.04 at 10:14:52:614: B2BStarter thread: (DEBUG) TransportProperties.TransportProperties():transport_callout_waittime=30;http.receiver.registry_port=5110;port=60700;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;http.receiver.instance_name=IP;
2008.11.04 at 10:14:52:615: B2BStarter thread: (DEBUG) initialize TransportReceiver: [BTGS_ebMS_Transport_Server < http > < BTGS >]
2008.11.04 at 10:14:52:617: B2BStarter thread: (STATUS) [IPT_HttpRecRegisterBegin] HTTPReceiver.init(): Registering HTTP Receiver ...
2008.11.04 at 10:14:52:618: B2BStarter thread: (STATUS) RMIResponsePort = null
2008.11.04 at 10:14:53:020: B2BStarter thread: (STATUS) low port = 5110
2008.11.04 at 10:14:53:022: B2BStarter thread: (STATUS) high port = 5110
2008.11.04 at 10:14:53:023: B2BStarter thread: (STATUS) [IPT_HttpRecRegisterCompleted] HTTPReceiver.init(): Completed registering HTTP Receiver.
2008.11.04 at 10:14:55:987: RMI TCP Connection(13)-147.149.200.108: (STATUS) [IPT_HttpRecSendMessageViaCallback] A request is routed by HTTP Receiver to registered listener.
2008.11.04 at 10:14:58:018: Thread-14: (DEBUG) TransportProperties.TransportProperties():ACTION_NAME=ACTION:rqRequestTroubleReportAmendment;FROMROLE:Consumer;TOROLE:Provider;SERVICE:bcRequestTroubleReportConsumerAmendment_BT_V1;SERVICETYPE:string;;jms.sender.jndi_destination_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://147.149.200.111:53482,147.149.200.111:53484;MSG_TYPE=1;MSG_ID=9395C86B11D66FF77B500000E555D000-1;TO_PARTY_IDENTIFIER=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#123456789;FROM_PARTY_IDENTIFIER=urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#987654321;jms.sender.jndi_connection_factory_location=weblogic.jws.jms.QueueConnectionFactory;jms.sender.destination_password=******;jms.sender.factory_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://147.149.200.111:53482,147.149.200.111:53484;jms.sender.jndi_destination_location=btgsb2b.distjms.WLI_to_CI_BPS_Cluster_1;jms.sender.is_topic=false;jms.sender.type=bytes;DOCTYPE_NAME=rqRequestTroubleReportAmendment_DocType;FROM_PARTY=BTW;DOCTYPE_REVISION=1.0;TO_PARTY=BTGS;jms.sender.destination_username=weblogic;
2008.11.04 at 10:14:58:020: Thread-14: (DEBUG) Establishing JMS Connection.
2008.11.04 at 10:14:58:431: Thread-14: (DEBUG) TransportProperties.TransportProperties():
2008.11.04 at 10:14:58:433: Thread-14: (DEBUG) TransportProperties.TransportProperties():http.sender.port=80;http.sender.proto=http;http.sender.host=punin1879164268.sid.bt.com;http.sender.path=/b2b/transportServlet;
2008.11.04 at 10:14:58:434: Thread-14: (DEBUG) Discard Existing Cookies for CurrentThreadContext = Thread[Thread-14,5,main]
2008.11.04 at 10:14:58:435: Thread-14: (DEBUG) Timeout = 60000
2008.11.04 at 10:14:58:436: Thread-14: (DEBUG) Basic authentication is not used due to one of security parameters not set. Make sure username, password, and realm are set in delivery channel.
2008.11.04 at 10:14:58:437: Thread-14: (DEBUG) http.sync = null
2008.11.04 at 10:14:58:438: Thread-14: (DEBUG) Number of headers to be added is 7
2008.11.04 at 10:14:58:932: Thread-14: (DEBUG) [IPT_HttpSendResponseStatusCode] HTTP Response status code: 204
2008.11.04 at 10:14:58:934: Thread-14: (DEBUG) [IPT_HttpSendResponseMessage] HTTP Response message: .
Regards,
Suhas.

Unable to send message through iMessage

Unable to send message through iMessage.
Retry fails over and over again.
But able to receive from it.
Tried resetting network settings then it works again until the problem comes back.
Not sure what causes the problem. I do not wish to reboot my iphone everytime when it happens.
Seems like ios7 gm issues.
Never had this problem on the beta.
Anyone have any resolution to this?

iMessage is Activated.
Facetime is Activated.
Don't know what is preventing me from sending over iMessage.
Receiving is no problem. Even during the the time I was trying to send.

How to handle failure when sending messages to remote queues from OAS10.1.3

Hi,
Here is my problem. IN my project, I have a MDB which is looking for message in a queue and once a message arrived, it supposed to send the message to remote queues.
Assume that there are 3 remote queues, and my mdb is trying to send the message to all the 3 remote queues,
1) My problem is, If one of the remote queue is not reachable or down, then the MDB should be able to resend it several times until it reaches the failed remote queue.
2) At the same time, I dont want to resend the messages(duplicate) to the queues which are successful ones.
Please suggest me some solution for this in JMS.
My MDB deployed at 10.1.3 and assume that remote queue can be in either another 10.1.3 or WAS 6.0(Optional).
Thanks and regards,
SS.

Hi,
1) My problem is, If one of the remote queue is not reachable or down, then the MDB should be able to resend it several times until it reaches the failed remote queue.
Not very sure what is your question, depending on if you want to resend the message if one of three queues is down.
If the message has to arrive to a certain destination while mdb received it, you may try to reconnnect and resend the message in a couple of times. Perhaps you need a couter or timeout to limit the number of time to retry or the period to retry.
Is that what you are asking.
2) At the same time, I dont want to resend the messages(duplicate) to the queues which are successful ones.
While sending message to a queue, those implementation is within the exception try/catch block, so any resend failure (JMSException) will fall into the catch block I guess. And we can probably use that exception to determine if the message is able to send to remote queue, if not, keep resending util it is over the limit of retries. For example:
onMessage(Message){
resend(message, counter);
public void resend(message, counter) {
try{
if (counter <= retryLimit){
.... // do the reconnect or/and resend operation
}catch(exception e){
resend(message, counter++);
If the above is not what you are asking, please clarify a bit.
Rocky

HT1267 I am unable to send messages on my iPhone. I am getting an error when I send it. This just started this morning.

This is my first timeo n Apple Support. Suddenly this morning I am unable to send messages through my iPhone. I can send messages to one number, but all the other numbers I am sending to I receive an error message. Also, I can receive messages from the one number I can send to, but am unable to receive messages from any other number. What do I do to fix this?

Hi Steve,
No he has not turned iMessage off, infact when he sends me a message thru iMessage it says 'delivered'. I am at my wits end nd I don't know what to do anymore.

"Cannot send message using the server....."

Hi all,
Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
"Cannot send message using the server smtp.xxx.com:user
Sending the message content to the server failed.
Select a different outgoing mail server from the list below etc etc"
I am sure a lot of you have seen this error.
However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
Thanks again.
Gerry McCoy

I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
Still, I have the same problem with the same error messages.
I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
What about SSL - it's not checked.
Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

Cannot send message using the server (null)

i use mail 2.1.
i have a .mac account and have three other email accounts attached to my mail account.
lately, i cannot send any email.
the switchiing ports fix hasn't helped either.
this is the error message:
CANNOT SEND MESSAGE USING THE SERVER (null)
The server response was: 5.1.0 <email [email protected]>...
From address does not match authentication.
Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
Message from: email <[email protected]>
Send message using: [there is a combo box here with all the four accounts servers listed]
no matter which one i pick it doesn't work and no email is sent.
anyone have this error before? or now how to fix it?
i'd be appreciative.
thanks
1.67 GHz Power PC PowerBook G4 Mac OS X (10.4.6) Sony HDR HC3 HD HandyCam MiniDV

I was having a similar problem (don't feel like typing all the details)
I was about to to delete my com.apple.mail.plist, when finally it hit me.
I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

Cannot send messages to a specific UK number via U...

Hi
I am having trouble sending an SMS to a *specific* UK number. The number can receive SMSs OK from me using my UK SIM, even while I'm in the states.
The combinations I have tried are:
* handset 6101b in UK with UK sim - OK
* handset 7250i in UK with UK sim - OK
* handset 7250i in USA with UK sim - OK
* handset 6101b in USA with USA sim - problem
So it's not my handset that's the problem, it looks like it's the USA sim or network (t-mobile) that's the problem.
I can send SMS to other UK number using my USA phone ok, just not this one specific number.
The phone says "Sending.... Message Sent" and the immediately the delivery report comes in saying "Not Sent To xyz".
Could it be that the recipient network (PAYG) has banned *receipt* of international messages? Seems unlikely. The recipient network is Tesco.
Could it be that my USA network has banned me from sending messages to this UK network? I doubt it as all my other USA-to-UK messages are received.
Any thoughts please?
Many thanks
DanielMessage Edited by dc197 on 20-Jun-2006
09:01 PM

I would think it'd be a problem with the handset rather than the operators... Can't think what though if it's sending texts to other numbers...
Strange...
Ask them to get a new number? maybe not lol
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

"Cannot Send Message" from Verizon to Hotmail

I see by reading this board that many others have problems with Verizon e-mail accounts.
When I try to send e-mails from my Verizon account into my Hotmail mailbox using an iMac, I get this message every time: "Cannot send message using the server e-mail." The only thing it is letting me do is send an e-mail from one Verizon folder into another. It won't let me go from Verizon into Hotmail.
I checked with Apple tech support, and their claim is that Verizon is for some reason blocking the outgoing e-mail into MSN/Hotmail.
I checked out the options under 'Advanced Account Info' but am not tech-savvy enough to understand what I am looking at, and the bottom section tells me to get advice from a systems administrator. Could anyone tell me the best way to go about getting this advice?
Thanks.

We would want to make sure the mail settings are correct. I have sent you a private message to get more information.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Cannot Send Messages Using the Server

I am dependent (during the day) on a wireless connection to the Minneapolis Wi-Fi system (U.S. Wireless).
I've got an e-mail account with comcast and I have successfully interfaced this with the Apple Mail application that came with OS X 10.5.4 and for many weeks have been happily sending and receiving e-mails. But....
I've been on the road and had to connect with Hotel internet services and I was picking up free WiFi in NYC when I was there.
I first noticed the problem when I was staying at a hotel in Vermont.
I would try to send e-mails and I would get the message:
CANNOT SEND MESSGE USING THE SERVER __________.
Select a different outgoing mail server....
Now, I am back home and using my U.S. Wireless connection (which has been really bad lately).
I keep getting these blasted messages and my mail sometimes goes through but more than often, I get these "cannot send message.." notices and my e-mail just sits there going nowhere in the outbox.
How can I solve this problem?

Beside the SMTP name -- smtp.comcast.net -- there is a pair of arrows, with one pointing up and one pointing down. If you click on those arrows you will be presented with a list of all SMTP ever enter (you may only have one), and also the command to Edit Server List. If you choose Edit Server List, you will be presented with a completely new setup window, dealing only with SMTP servers, and that window will have two tabs, one of which is also Advanced.
From the name, smtp.comcast.net, without your Username appended, would indicate that an Authentication of None is currently in effect. With changes that Comcast has made recently, whether you use Port 25 or Port 587, I believe you would have to use Password Authentication, most certainly if the latter Port 587 is chosen.
If you click on the link below, although not for Comcast, you will nevertheless see in section 12 through 15, screenshots that cover the SMTP setup that I am describing above.
http://wildblueworld.com/dishmail.net/howdoi-applemail.php#2
Ernie

Send Message retry

Similar Messages

Maybe you are looking for