Send Message With Attachment
Good Day
Experts:
I am looking to Send a message with an attachment from my AddOn code to a recipient.
For now, I am just trying to send it to myself here internally. I have spent time in the Help, Sample and the forum
with no luck. The Messages object and the Messages Services and I cannot get the code to send an e-mail.
Now, my SBO Mailer service is started in the SAP B1 Serve Suite Manager.
Here is my code for the oMessages object. This adds without error but I never get the e-mail. Is there somewhere I can check to see if the email got lost?
Dim lErrCode As Long
Dim sErrMsg As String
lErrCode = Nothing
sErrMsg = ""
Dim msg As SAPbobsCOM.Messages
msg = g_B1Connection.Company.GetBusinessObject(BoObjectTypes.oMessages)
msg.MessageText = "This is the content of message"
msg.Subject = "Hello manager"
Call msg.Recipients.Add()
msg.Recipients.UserCode = "manager"
msg.Recipients.NameTo = "manager"
msg.Recipients.SendEmail = BoYesNoEnum.tYES
msg.Recipients.EmailAddress = "<email address>"
Call msg.Attachments.Add()
msg.Attachments.Item(0).FileName = "C:\NextBPCode.txt"
msg.Add()
g_B1Connection.Company.GetLastError(lErrCode, sErrMsg)
If lErrCode = 0 Then
Else
UpdateStatus("Error sending email..." & sErrMsg & "", SAPbouiCOM.BoStatusBarMessageType.smt_Error)
End If
Any help is appreciated as I have spent way too much time so far on this issue.
Thanks,
EJD
Hi Ed,
Your code works fine (I can send emails to an account with attachments using this code).
I'm assuming that you can send the message (and attachment) if you do it manually through the user-interface. If you don't get the message when you do it manually then check your SBO Mailer settings.
When you add a message in SBO you should see new entries in the OALR and ALR1 tables. The ALR1 table has a status column (U for unsent, P for pending, S for sent and E for error). If the status remains at U then your mailer is not attempting to send the email. If you get an E status then check the application log in Event Viewer as this should record a more detailed error message (and then check SAP Notes for the code). Also check your attachments path to see if the attachment has been copied across (attachment path is in the path tab of General Settings).
Kind Regards,
Owen
Similar Messages
-
Don,t send messages with attached
Mail, let me send normal messages, but when i send attached messages, makes time error. The attachment is 56 Kb. I also try with entourage and the same.
In a pc with windows i can send this mail.
Some idea?????
Sorry about my english and thanks.Lolete,
This behavior of sending without an attachment, but not with, could be explained by a mismatch in the way the Mac is sending, and the requirements of your particular ISP. You can test for this, by changing the maximum transmission unit (MTU) setting in your Ethernet settings -- see:
http://docs.info.apple.com/article.html?artnum=303192
Focus only on the portion of this article that is about an ethernet connection. I would suggest starting with a value of 1492, and then reducing by 100 for several steps.
Do not hesitate to ask any questions you need answered to be comfortable in testing for changes in the value of MTU. Not every computer will send the same way, and the packet size used by your PC may have gotten tuned to your network, or simply not send in the same way.
Ernie -
Mail will not quit after sending message with attachment
B&W G3-450
OSX 10.2.8
640 MB RAM
I recently switched to using an email account through AOL Instant Messenger (AIM.com). The only way to connect to their service is via IMAP. I have all the correct settings, I can send and receive email no problem.
However, when I attempt to send a message that contains an attachment (.zip, jpeg, anything) the email will send just find. The problem is when I try to quit mail it wont' respond. I can continue to send or receive after sending the message but it will not quit. Trying to log out does not work either as it reports a problem with Mail that prevents closing the session. The only thing I can do is force quit mail.
The next time I use mail it works fine and there are no problems. The only issue seems to be this hanging problem. I've never experienced this problem using POP3 accounts.
Any suggestions?
B&W G3-450 Mac OS X (10.2.x)Does anyone have a suggestion here?
-
Mail doesn't indicate anything when sending message with attachment
I'm sure that in the past, when a message was sent that contained an attachment (or was just big) there would be some indication that the message was still sending before you heard the 'woosh' sound to confirm the message had been sent. I just sent something with a 500k attachment. It took a few seconds to go of course, but during that time I could see no visual indication that Mail was still doing anything, until eventually the 'woosh' confirmed it had gone. Is there something I've failed to choose as a preference?
Many people have reported in this forum that for them Sent didn’t change to Sending... as it’s supposed to while a message is being sent:
http://discussions.apple.com/search.jspa?q=Sent%26%26Sending&objID=f753
The problem usually affects Intel-based Macs, but the two Macs that appear in your profile are PowerPC-based...
I’ve never seen a solution for this problem. -
Problem with sending message with excel attachment
hi,
i m using sap b1 2005b i send message with excel attachment to sap user but message is reached to destination but attchment cannot send .ot shows an internal error pls help me.
reagrds,
vishalVishal,
Couple of questions.
How are you sending this message. Is it a message that you create and send Internally with an attachment.
As you reply me, please also check if the <b>Attachments folder</b> has been set under <b>Administration > System Initialization > General Settings.....Path Tab</b>
SBO tries to copy the attachment from the location you select to the Path defined for Attachments.
Let me know
Suda -
Sending Mail with attachment and preserving the order of attachment
Hi Everyone!!!!!!
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;
I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.
Sorry for stuff essay and thanks in advance!!!!!!!!!!!>
Please update your forum profile with a real handle instead of "974850".
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.Always post code using <tt>\...\</tt> tags as described in the FAQ.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.I see no code that attaches anything to email messages. What code is used to do this? Why are the files being written to the file system? -
Sending Mail with attachment from WD
Hi all,
I wan't to send an email from webdynpro with an attached pdf-document. I had a look at Tutorial 31, but i will only use the first part, sending email with attached interactive form. So I decided to build a new project. I did everything as in the tutorial described, but when entering the following code into the wdDoInit method from the SendView an error occurs.
//@@begin wdDoInit()
// @TODO Enter your email address for the setFrom and setTo methods by replacing the text in angle brackets.
wdContext.currentEmailElement().setFrom("[email protected]");
wdContext.currentEmailElement().setTo("[email protected]");
wdContext.currentEmailElement().setCc("");
wdContext.currentEmailElement().setBcc("");
wdContext.currentEmailElement().setSubject("Travel Request Form");
wdContext.currentEmailElement().setBody("BlaBlaBla");
//@@end
In the coding is no error. In the Context node of the SendView I created a new value node with the value attributes. When writing the code and using strg+space i can complete automatically, so no writing errors.
When deploying and running the application I get always a NullPointerException, if make no difference if i delete one entry or which line of code i insert, the same error.
java.lang.NullPointerException
at com.ao.test.emailtest.SendView.wdDoInit(SendView.java:99)
at com.ao.test.emailtest.wdp.InternalSendView.wdDoInit(InternalSendView.java:127)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:274)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
I've compared my project with the one from tutorial but i found no differences.
Have anybody have an idea what to do?
Thanks
MathiasHi,
NullpOinter excepttion could be bcose of "currentEmailElement()".
Please create an element of EmailNode before these statements.
IPrivate<ViewName>.IEmailElement ele=wdContext.createEmailElement();
wdContext.NodeEmail().addElement(ele);
You can use the following for sending attachments :
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText(Attachment);
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource(Attachment);
messageBodyPart.setDataHandler(new DataHandler(source));
messageBodyPart.setFileName(Attachment);
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Regards, Anilkumar
Message was edited by: Anilkumar Vippagunta -
Sending mail with attachment and body.
Hi Experts,
I have a requirement of sending a mail with an attachment and also the mail will have a body whose content will be same as that in the attachment.Subject of the mail will also be configured dynamically.Though I am able to send the mail with the attachment but I am not able to configure the body whose content will be same as that of the attachment.
I have unchecked the "Use Mail Package" and has hard-coded the "TO","From" field for sending the mail with attachment.
Can you please check and let me know how to configure the body which will be same as that of the attachment.
Thanks and Regards
Atanu MazumdarHi,
Use MTB module and then one of the parameter which can allow you to send message in attachment as well as in message body.
Transform.ContentDisposition: it helps us to decide if we want to send the payload as an attachment or in the message body. If we give the Parameter value as u201Cattachmentu201D then we will have the payload attached in the mail and if we assign this value as u201Cinlineu201D the payload will go in the mail body.
Hope this helps you..
Regards.... -
Mail_Receiver: Send Mail with attachment
Hi everybody,
I need some help. I want to send a mail with attachment.
for this I have imported SAPs xsd for the mail adapter.
I wonder how to map the target fields?
The following causes five! attachments in SXMB_MONI and the adapter throws
java.lang.IllegalArgumentException: can't parse argument number
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>SubjctName</Subject>
<From>mailadress</From>
<To>mailadress</To>
<Content_Type>text/plain; charset="ISO-8859-1"</Content_Type>
<Content_Description>
<attachment filename="filename.txt">This should be the content of the attachment</attachment>
</Content_Description>
<Content>Constant</Content>
</ns1:Mail>
</ns0:Message1>
</ns0:Messages>
How do I have to foll the target fields?
Thanks regards
MarioHi
the following links may help you :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
Also reffer to the below mentioned thread;
Regarding mail sent with an excel attachment
Regard's
Chetan Ahuja -
Convert Screen(spool) to PDF file sending mail with attach file
Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = p_spool
first_line = 1
last_line = 0
desired_type = ' '
IMPORTING
real_type = real_type
sp_lang = sp_lang
TABLES
buffer = so_ali
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
+ STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
sender_address = v_name
sender_address_type = 'B'
TABLES
packing_list = plist
contents_bin = so_ali
receivers = rec_tab
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren -
Problem in sending mail with attachment
Hi All,
I am using the function module <b>'SO_NEW_DOCUMENT_ATT_SEND_API1'</b> to send mail with attachment.
the program executes properly and shows a message <b>'Document Sent'</b>. But neither the sent mail appears in <b>'SOST'</b> nor I get it on the specified email id.
Below is my code:
<b>***</b> As attachment I am sending resume whose contents are stored in table 'ZResume' corresponding to personnel no.(pernr) and serial No.(srno).
<b>START OF PROGRAM</b>----
REPORT ZPTEST_SEND_MAIL_ATTATCHMENT.
DATA : w_name TYPE sos04-l_adr_name.
DATA: RESUME TYPE table of XSTRING with header line.
START-OF-SELECTION.
<b>* Data Declaration</b>
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
lt_listobject TYPE TABLE OF abaplist WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
SELECT SINGLE RESUME FROM ZRESUME INTO RESUME
WHERE PERNR EQ '00001182'
AND SRNO EQ '1'.
APPEND RESUME.
<b>* Because RESUME may be of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy</b>
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = resume
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error in function module &1
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
<b>* Create the message and send the document.
Create Message Body</b>
<b>* Title and Description</b>
ls_docdata-obj_name = 'Resume'.
ls_docdata-obj_descr = 'Resume'.
<b>* Main Text</b>
lt_objtxt = 'Resume of the candidate' .
APPEND lt_objtxt.
<b>* Write Packing List (Main)</b>
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
<b>* Create Message Attachment
Write Packing List (Attachment)</b>
l_att_type = 'ALI'.
DESCRIBE TABLE lt_objbin LINES l_tab_lines.
READ TABLE lt_objbin INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objbin ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'Resume'.
APPEND lt_objpack.
<b>* Create receiver list</b>
lt_reclist-receiver = '[email protected]'.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
<b>* Send Message</b>
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
<b>END OF PROGRAM</b>----
Can anybody tell me where I am making mistake?
Thanks in advance,
PragyaHi Pragya,
Refer the code below. It's working fine and try to match up the things from your program.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
BPEL send email with attachment
Hi guys,,
Now i want to send email with attachment from the bpel console. In bpel console, if i want to use, "browse" button, how can i create this button in my xsd file?Hello,
Well I'm using the BPEL build in decoder. It works for txt file but how about PDF? Will it be the same?
it give me this message in the email process.
XML Parsing Error: reference to invalid character number
p/s: it working to txt but not pdf.
below is the script
<bpelx:exec name="decoder" language="java" version="1.5">
<![CDATA[String inputString = new String();
inputString =(String)getVariableData("attachmentContentVar");
try {
String decoded = Base64Decoder.decode(inputString);
setVariableData("decoded",decoded);
catch(Exception e)
e.printStackTrace();
}]]>
</bpelx:exec>
<copy>
<from variable="retriveAttachment_retriveAttachmentSelect_TASKID_OutputVariable"
part="WfattachmentCollection"
query="/ns3:WfattachmentCollection/ns3:Wfattachment/ns3:encoding"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:MimeType"/>
</copy>
<copy>
<from variable="retriveAttachment_retriveAttachmentSelect_TASKID_OutputVariable"
part="WfattachmentCollection"
query="/ns3:WfattachmentCollection/ns3:Wfattachment/ns3:name"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:BodyPartName"/>
</copy>
<copy>
<from expression="bpws:getVariableData('decoded')"/>
<to variable="varNotificationReq" part="EmailPayload"
query="/EmailPayload/ns1:Content/ns1:ContentBody/ns1:MultiPart/ns1:BodyPart[2]/ns1:ContentBody"/>
</copy>
</assign>
Edited by: kpchong on Oct 20, 2009 12:00 AM -
Send Email with Attachment in BSP?
Hello,
I have trouble about sending Email in BSP .
I don't know how to <b>Send Email with attachment in BSP</b> . Please give me some advice .
Thank you very much!Here is a sample application..
<b>Layout</b>
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Send Mail with Attachment " >
<htmlb:form id = "form1"
encodingType = "multipart/form-data" >
<htmlb:label for = "MAILTO"
text = "Mail to" />
<htmlb:inputField id = "MAILTO"
size = "20"
value = "<%= mail_to %>"
type = "string" />
<htmlb:fileUpload id = "myUpload"
onUpload = "HandleUpload"
upload_text = "Attach"
size = "90" />
</htmlb:form>
</htmlb:page>
</htmlb:content>
<b>Page attributes:</b>
mail_to TYPE ADR6-SMTP_ADDR E-Mail Address
<b> Event handler OnInputprocessing..</b>
DATA: fileUpload TYPE REF TO CL_HTMLB_FILEUPLOAD,
file_content TYPE XSTRING,
file_length TYPE STRING,
file_mime_type TYPE STRING,
file_name TYPE STRING.
fileUpload ?= CL_HTMLB_MANAGER=>GET_DATA(
request = request
id = 'myUpload'
name = 'fileUpload' ).
if fileUpload is not INITIAL.
file_name = fileUpload->file_name.
file_mime_type = fileUpload->file_content_type.
file_length = fileUpload->file_length.
file_content = fileUpload->file_content.
mail_to = request->get_form_field( `MAILTO` ).
* Send mail part..
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
* Message body and subject
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lt_att_content_hex type solix_tab,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please find the attached report.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Visit report' ).
data: data_tab type solix_tab,
p_data type XSTRING.
* Pass the data of the document we have uploaded..
p_data = file_content.
call function 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = p_data
TABLES
binary_tab = data_tab.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Visit Report'
i_att_content_hex = data_tab ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
* Add attachment
* Pass the document to send request
lo_send_request->set_document( lo_document ).
* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value '[email protected]'.
* Set sender
l_send = mail_to.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
* Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
** Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
endif.
Hope this will be helpful.
Raja T -
Send mail with attachment from webdynpro application
hi,
From a webdynpro application, the user will upload any files through the File upload ui element.These uploaded files has to go as an attachment in the mail which is being send to a particular ID ,when the user clicks the submit button in the form.
can you please give me the code regarding this and help me in sending mail with attachment from a webdynpro application.
Thanks in advance,
shami.Hai,
Properties props = System.getProperties();
props.put("mail.smtp.host", "xx.xx.x.xx");
Session session = Session.getDefaultInstance(props, null);
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress("[email protected]"));
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse("[email protected]", false));
msg.setSubject(subject);
msg.setText(body);
msg.setHeader("X-Mailer", " Email");
msg.setSentDate(new Date());
MimeBodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Hai , This mail Generated By the Program");
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource("C:\nag.xls");//Here you need to give the Path of uploaded File
messageBodyPart.setDataHandler( new DataHandler(source));
messageBodyPart.setFileName("nag.xls");
multipart.addBodyPart(messageBodyPart);
// Put parts in message
msg.setContent(multipart);
Transport.send(msg);
Regards,
Naga -
Send mail with attachment from the uploaded file
hi,
From a form thread i got the following code to send mail with attachment with the file uploaded from the file upload ui element.
public void onActionLoadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionLoadFile(ServerEvent)
WDWebResourceType FileType = null;
String FileName = new String();
//get attribute info for context attribute 'FileUpload'
IWDAttributeInfo attributeInfo =
wdContext.getNodeInfo().getAttribute(
IPrivateEmailView.IContextElement.FILE_UPLOAD);
//get modifiable binary type from the attribute info,requires type cast.
IWDModifiableBinaryType binaryType =
(IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
IPrivateEmailView.IContextElement element =
wdContext.currentContextElement();
//if a file in the 'FileResource' attribute exists
if (element.getFileUpload() != null) {
try {
String mimeType = binaryType.getMimeType().toString();
byte[] file = element.getFileUpload();
//get the size of the uploaded file
element.setFileSize(this.getFileSize(file));
//get the extension of the uploaded file
element.setFileExtension(binaryType.getMimeType().getFileExtension());
//NOTE: context attribute 'FileName' must not be set
//because the FileUpload-UI-element property 'fileName'
//is bound to it. Consequently the fileName is automatically
//written to the context after file upload.
//report success message
wdComponentAPI.getMessageManager().reportMessage(
IMessageEmailComp.SF_UPLOAD,
new Object[] { binaryType.getFileName()},
false);
FileType = binaryType.getMimeType();
FileName = binaryType.getFileName();
} catch (Exception e) {
throw new WDRuntimeException(e);
//if no file in the 'FileResource' attribute exists
else {
//report error message
IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
msgMgr.reportContextAttributeMessage(
element,
attributeInfo,
IMessageEmailComp.NO_FILE,
new Object[] { "" },
true);
//clear the FileResource context value attribute
//element.setFileUpload(null);
String URL;
URL = this.CreateAndGetPathFileUpload(
wdContext.currentContextElement().getFileUpload(),
FileName);
// if (URL.length() == 1){
// //ERRORE
wdContext.currentContextElement().setPATHFileUploaded(URL);
//@@end
public boolean send( java.lang.String subj, java.lang.String mess, java.lang.String dest, java.lang.String attach, java.lang.String FileName )
//@@begin send()
InitialContext ctx = null;
Address[] address = null;
Message msg = null;
Session sess = null;
MimeBodyPart bodyPart = null;
Multipart mp = null;
// "141.29.193.71" == milvl2ja.icn.siemens.it (SMTP di Siemens)
try {
Properties props = new Properties();
props.put("domain","true");
ctx = new InitialContext(props);
sess = (Session) ctx.lookup("java:comp/env/mail/MailSession");
msg = new MimeMessage(sess);
IWDClientUser utente = WDClientUser.getCurrentUser();
String senderEmail = utente.getSAPUser().getEmail();
InternetAddress addressFrom = new InternetAddress(senderEmail);
msg.setFrom(addressFrom);
String EmailDEST = dest;
InternetAddress addressTo = new InternetAddress(EmailDEST);
msg.setRecipient(Message.RecipientType.TO, addressTo);
msg.setSubject(subj);
// if ((mess != null) && (mess.length()>0)) {
// msg.setContent(mess, "text/plain");
// } else {
// msg.setContent("", "text/plain");
//Gestione ATTACHMENT...
String attachedFileName = new String(wdContext.currentContextElement().getFileName());
boolean hasAttachment = (attachedFileName != null) && (attachedFileName.length() > 0);
boolean isMultiPart = (mess != null) && (mess.length() > 1);
//adding an attachment makes the message multipart
if (isMultiPart || hasAttachment) {
mp = new MimeMultipart();
// add text parts
if (mess != null) {
for (int i = 0; i < mess.length(); i++) {
bodyPart = new MimeBodyPart();
bodyPart.setContent(mess,"text/plain");
mp.addBodyPart(bodyPart);
//attach the file to the message if needed
if (hasAttachment) { // avoid the case with no text parts
bodyPart = new MimeBodyPart();
bodyPart.setContent("Allegato incluso nel messaggio.","text/plain");
mp.addBodyPart(bodyPart);
// the part with the file
FileDataSource fds = new FileDataSource(attach);
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
attachmentBodyPart.setDataHandler(new DataHandler(fds));
//URL URLattachedFileName = new URL(attach);
//attachmentBodyPart.setDataHandler(new DataHandler(URLattachedFileName));
attachmentBodyPart.setFileName(FileName);
mp.addBodyPart(attachmentBodyPart);
msg.setContent(mp);
} else {
if ((mess != null) && (mess.length() > 0)) {
msg.setContent(mess, "text/plain");
} else {
msg.setContent("", "text/plain");
//fine ATTACHMENT
msg.setSentDate(new GregorianCalendar().getTime());
msg.saveChanges();
address = msg.getAllRecipients();
Transport.send(msg, address);
} catch (Exception e) {
e.printStackTrace();
return false;
return true;
//@@end
When i used the same code in my application i am gett ing error in many places..
1)FileDataSource fds = new FileDataSource(<b>attach</b>);
attach cannot be resolved
2)attachmentBodyPart.setFileName(<b>FileName</b>);
fliename cannot be resolved
3)byte[] file = element.getFileUpload();
type mismatch cannot convert sting to byte[]
4)element.setFileSize(this.getFileSize(file));
method getFileSize() is undefined
5)element.setFileExtension(binaryType.getMimeType().getFileExtension());
method getFilExtension() is undefined
6)URL = this.CreateAndGetPathFileUpload(wdContext.currentContextElement().getFileUpload(),FileName);
method CreateAndGetPathFileUpload() is undefined.
7)wdContext.currentContextElement().setPATHFileUploaded(URL);
from the above error i can understand that only i have got the part of the code.
Please send me the complete coding.
some method definitions are missing....
Please help me to send the mail with attachment from the file uploaded from the file upload ui element.
Thanks in advance,
shami.hi,
I got this from the following link
Re: Attaching an excel file
plz help me ...
I am using 2004s with nwds 7.0.06.
also tell me what should be the type of the context variable FileUpload
Thanks in advance,
shami.
Maybe you are looking for
-
Difficulties logging into with the Apple-ID - wrong username
Hello! I just got an iPhone 4 and I can´t buy apps because it says that the password is not valid. I have checked it out several times and it is. The name presented as the usename of my account is not the right one though. How do I change it? Or shou
-
How to Read and Write .XML datas (HELP Plz...)
hai everybody how to read and write xml datas... plz give clean and simple example.. bcoz me want to produce such type of module... if any one help me .. thats the only way me laid in software ladder plz.... thank u in advance
-
Firefox 13 or 14 won't print after upgrade
After upgrading from FF 13, I am no longer able to print from any website--the system print dialog box fails to open. This bug is also present in FF14 Beta as well. I have already attempted to reset printer.printer (all of them) from about: config wi
-
BRCONNECT terminated with errors
HI, Please help me in trouble shooting this problem Ext. prog.: BR280I Time stamp 2008-04-15 04.48.00 Ext. prog.: BR848I Thread 2 terminated with return code 0 Ext. prog.: Ext. prog.: BR280I Time stamp 2008-04-15 04.48.00 Ext. prog.: BR848I Thread 3
-
Internet disruption...Problem loading page
Hello, I have a Macbook OS X 10.5 and lately whenever I open up Safari or Firefox 3.5.7 to general websites, I receive a "Problem loading page. Firefox can't find server." Once I hit the try again button, everything usually works but I am worried tha