Send more than one mail

HI,
How should I send a delivery confirmation by email to more than one mail adresses?
Thanks
Zsolt

Hi !!
You can use the t.code V/34, here select your required output type say LD00, (get into the change mode) Select this entry, now click on 'Partner Functions'(available in the left hand margin), Click on 'New Enteries' . Under the heading of 'Medium', select 'Mail' , make necessary enteries under the headings on Function & name.
Now maintain the records for this output type for ex.LD00 in the t.code VV21.
Now try and execute your business process, this will definitly work.
Give your feedback.
Regards,
PATHIK

Similar Messages

Sending more than one expense type via E-Mail possible?

Hi to all!
Is it possible to send more than one Expense Type via E-Mail to the CfTE system? If yes: How can I create it?
Thanks for an answer!
Andreas

Hi Andreas,
if you add several attachments to an e-mail, the system will create a separate expense for each attachment. One of these expenses will also get the information from the subject line of the e-mail.
Apart from the attachment scenario, there is no option to create several expense based on a single e-mail.
Regards,
Andreas

How can I send more than one foto in a email

How can I send more than one foto in a email?

Or, to send up to 5 photos in one email, open the Photos app, go to the Album containing the photos, tap Select, tap up to 5 photos (a blue tick will appear on them), then tap the Share icon (square with arrow pointing up) and choose Mail.
If you choose more than 5 photos this way, you won't get the Mail option.

Sending more than one photo at a time

OK, fine, no MMS. We have to e-mail our pics to our friends.
But is there any way on an iPhone 3G to send more than one photo attachment at a time? Sometimes I'd like to send two or three pixs to my friends of an event and that means two or three separate e-mails that have to be addressed.
Can't I just tag or mark more tan a single photo and send the bunch?

unfortunately, its 1 picture only

ML server: more than one mail relay

How can I add more than one mail relay for outgoing mail through ISP?
In the server.app I can only add one mail-relay. My ISP recommends more

First I've heard of that recommendation....
Unless there's something rather odd going on here — cases such as very flaky ISP mail servers or very flaky network connections to the mail servers, such that you're finding a need to redirect your own mail client host settings to different mail servers at the same ISP, for instance — or if you're going to be sending out massive volumes of mail — I would leave it at one host, and see if there's an issue.
Mail servers are designed to retry for transient outages, so most errors should retry.
Postfix allows one relayhost, unless you want to get into sender_dependent_relayhost_maps and that's not particularly common.
With static IP and correct DNS, you could eliminate the relayhost setting entirely. That's a typical approach with mail servers.

App that can send more than one attachment at a time....

Does anyone know of a app that I can send more than one attachment at a time like resumes + cover letters. Not having any luck with gmail or pages for the Ipad.
Please help

The MPEG Streamclip app can batch process videos. It can even convert up to 4 videos at the same time.
http://www.squared5.com/
It's free...
Just drop as many videos as you like into the batch window.

How can i send more than one signal to DMA FIFO?

Hello,
I'm trying to send more than one signal to DMA FIFO, but i don't know how to do. When i send one signal i don't have problems. I try to use one block DMA FIFO for one signal. For example if i have 3 signal i use · DMA FIFO but whe i want to wath them in a waveform chart the signals have a delay.
How can I do to send more than one signal to DMA FIFO? and if that's no posible, How i can do for syncronizate the 3 signals?
The data type of the signal is FXP <16,10>
Regards.
Pablo
Solved!
Go to Solution.
Attachments:
Block Diagram.jpg ‏81 KB
Block Diagram.jpg ‏81 KB

Not quite. You need to use the Integer To Fixed Point Cast to change from the integers to your FXP numbers. You can then build them into a cluster to write to the Waveform Chart.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Combine and Decode FXP.png ‏14 KB

How can I send more than one document on an email

how can I send more than one document on one email

Thank you but I understand that form of attaching a document. However when I select a document then click 'Share' I have the option of sending the document by email as a word or pages document or pdf, what I want to know is can I use this procedure to send more than one document per email and if I can how?

I'm using an iPhone 4. I used to be able to send more than one picture at a time to another iPhone. Now I get messages that it cannot be delivered. What's going on?

While on vacation in Canada in July I started having trouble sending more than one pix at a time to other users. I don't recall having this problem before. Is there a limit on the number of pictures you can send via text? I wonder if I messed up some settings while I was in Canada. I had things set so that I could not receive phone calls so I wouldn't get charged. Could I have messed up text / multimedia settings as well?

We want your phone working just as well now as it did before your trip, sngbrd9. Are you trying to send the pictures to other Apple users using iMessage or are they being sent through MMS/picture messaging? Are you able to send pictures one at a time to those same contacts without an error? Did you change any settings in your camera to have HDR now instead of a slightly lower resolution with a smaller file size?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Recovery of more than one mail at a time from Time Machine

Hi. I'm trying to recover some old mails from Time Machine. My problem is that I can only recover one mail at a time. After it has been recovered Time Machine closes and I have to start all over again so this project will take some time:-). I've tried to highlight more than one mail but then mail crashes….I use OS 10.7. Can anyone help?
Regards
Henrik

just use "command" key:-)

TS2755 Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Ever since I updated my iphone 4 to 5.1.1, I am not able to send more than one picture at a time in a text message. Does anyone know how to fix this?

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

CAN ANDROID SEND MORE THAN ONE PICTURE IN A SINGLE TEXT

Hello,
Can anyone tell me if Android Razr M is capable of sending more than one picture in a single email and how to do it? Example: I have several pictures to send to one person and do not want to send them one at a time if I don't have to. Thank you

Some devices if you long press on the text screen have the ability to send more than one photo. However your owners manual usually has this information.
You also may not be able to send these multiples due to size constraints. Email is much better for these photos. Which of course is also limited by your ISP to around 10 megabytes per send.
Good Luck

How to send more than one parameter from FORM to REPORT?

Dear all,
i can send one parameter from FORM to REPORT. but when i send more than one parameter it gives error: frm 41214 unable to run report.
here is the code i think the error is in the following line of procedure:
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
where to place the parameters and is there any space is required?
Thanks
Muhammad Nadeem

Dear Saeed Iqbal,
thanks for you reply.
dear i am using Form 10g run_product is not supported in this version.
i am using RUN_REPORT_OBJECT.
PROCEDURE rep_gl_ledger IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
v_date_from date;
v_date_to date;
v_detail_id_from varchar2(100);
v_detail_id_to varchar2(100);
v_voucher_type varchar2(100);
--req_no char(17);
BEGIN
v_date_from :=      :ledger_para.p_date_from;
v_date_to :=      :ledger_para.p_date_to;
v_detail_id_from :=      :ledger_para.p_detail_id_from;
v_detail_id_to :=      :ledger_para.p_detail_id_to;
v_voucher_type :=      :ledger_para.p_voucher_type;
repid := find_report_object('gl_ledger');
--repid := find_report_object('REPORT80');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rep_online_FRHome');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no p_date_from='||v_date_from||'p_date_to='||v_date_to);
--SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/* Display report in the browser */
WEB.SHOW_DOCUMENT('http://'||:GLOBAL.G_IP||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?','_blank');
ELSE
     message('Error when running report');
END IF;
END;
Regards:
Muhammad Nadeem

Sending more than one string from a server to a client in TCP/IP

hi,
i have two VIs where one is the server and the other the client in TCP/IP. I need to send more than 2 strings to the client at the same time.i have used the XML method but then by using XML i cant send any thing else to the client because of the byte sizes. so either i need a new way to send the strings or a new way to send more data. i have attached my VIs to this post if you need to take a look.
thanks,
Rambaldi.
Attachments:
ServerClient.zip ‏83 KB

Well, after looking at the code it is very difficult to understand what you are trying to do. Not to be nasty or anything but your code is a mess. Did you know that in both VIs you have an infinite loop? The only way to exit your VIs is to use the Abort button. This is bad since it doesn't allow you to actually perform any type of cleanup. Your wiring is very difficult to follow. You should also avoid using local variables to pass data through your application. If you need to pass data between two parallel processes use queues, notifiers or an action engine. You can get rid of all of the sequence frames that you have. They aren't really doing anything for you and are unnecessary.
As to your particular question I would have to assume that it is simply a result of bad coding that is preventing you from sending more than one string. You have logic in the second loop that appears to be impossible to get to since the conrol used to switch the case statement is placed on a hidden part of the front panel. Take a look at the TCP server example I posted in this thread. The example is on the second page of that thread.
In order to help you I think you need to provide a good description of exactly what you want your server and client to do. You also need to do some code cleanup to make it readable and easier to follow.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Sending more than one name value pair via ajaxRequest.add()

Hi all,
I'm implementing AJAX in Oracle Application Express to perform DML operations on a table. I need to send more than one name value pair via the ajaxRequest object. Can someone guide me how to achieve this? Say for example i need to send 2 values(need to send 2 form elements when submit button is clicked) P3_region and P3_scope. i tried the following methods.
Method 1:
======
ajaxRequest.add('P3_region',document.getElementById('P3_region').value);
ajaxRequest.add('P3_scope',document.getElementById('P3_scope').value);
Method 2:
======
ajaxRequest.add('P3_region',document.getElementById('P3_region').value,'P3_scope',document.getElementById('P3_scope').value);
Neither of them is fruitful. Can someone guide me how to achieve this?
Regards,
Balaji Radhakrishnan.

Hi Roel,
The javascript goes like this.
<script language="JavaScript" type="text/javascript">
function getElement1()
document.getElementById('P3_Element1').value = '';
var ajaxRequest = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=Element1Process',0);
ajaxRequest.add('P3_Element2',document.getElementById('P3_Element2').value);
ajaxRequest.add('P3_Element3',document.getElementById('P3_Element3').value);
ajaxRequest.add('P3_Element4',document.getElementById('P3_Element4').value);
ajaxRequest.add('P3_Element5',document.getElementById('P3_Element5').value);
ajaxRequest.add('P3_Element6',document.getElementById('P3_Element6').value);
ajaxResult = ajaxRequest.get();
if(ajaxResult)
var wsArray = ajaxResult.split("~");
document.getElementById('P3_Element1').value = wsArray[0];
</script>
The application Process goes like this..
declare
v_Element1 VARCHAR2(60);
begin
select distinct Element1 into v_Element1 from TableA where Element2=:P3_Element2 AND Element3=:P3_Element3 AND Element4=:P3_Element4 AND Element5=:P3_Element5 AND Element6=:P3_Element6;
htp.prn(v_Element1);
exception
when others then
v_Element1 := 'Invalid Header Combination';
htp.prn(v_Element1);
end;
The requirement goes like this..
When i give Element2, Element3,Element4,Element5,Element6 as input in the form page the Element1 should get displayed automatically without refreshing the page. But when i use the above javascript and application process i get the Element1 loaded with some html scripts. I call the javascript using onChange() function.
Regards,
Balaji Radhakrishnan.

Send more than one mail

Similar Messages

Maybe you are looking for