Send only release (no agreement) to supplier using POXPOPDF (PO Output for

Hello,
Client wants to use POXPOPDF for sending PO to supplier. When release is approved the PDF file is generated and contains two parts - agreement and release. Is it somehow possible to generate and send only release?
In other words, POXPOPDF has an option "Print Release Option". I would like to have "Print Releases Only" option.
Best Regards,
Andis

The report generation layout is @ RTF,
so try removing the part from RTF which you dont want to see from the output.

Similar Messages

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

My iPod won't charge on a wall charger, only on the computer. I used the same cord for both though. I used to be able to charge it with a wall charger, but now suddenly I can't. I've even used other wall pieces. Nothing seems to work.

My iPod will no longer charge with a wall charger, only the computer. I know it's not becuase of the wall piece or my cord, since I also use the same cord for computer charging, and the wall piece seems to work with others devices. It worked a couple of weeks ago, then suddenly quit. I think it may be something to do with the inside of my iPod where the charger goes. I find it really inconvient to always have to use the computer to charge my iPod. I believe I have a three year warrenty on my iPod, but I wouldn't think it would cover this problem. Is there anything I can do to fix it?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. Bring the wall charger
Apple Retail Store - Genius Bar
If you have a three-year warrany it is not from Apple. The standare Apple warrantyis 1 year and y can purchas an extended warranty that give y a total of two years. You can check your Apple warranty coverage hee:
Check Your Service and Support Coverage

I purchased an ipod touch about 5 days ago and I am having buyers remorse. I am realizing that it's limitations to wifi places only inhibits it from actually being used in the car for directions or other places. I was unclear that you cannot add interne

I purchased an ipod touch, 4th generation recently and have discovered that I cannot "just add" internet to this all the time (for a fee). Silly me, I thought I could. So, can I return this, perhaps for an iphone?

Also you can get mi-fi a mobile wireless hotspot to connect from anywhere (for a monthly fee) that gets 3G or 4G data signals. See http://www.google.com/search?q=mifi+hotspot&sourceid=ie7&rls=com.microsoft:en-US &ie=utf8&oe=utf8

Using an external HD for both storage AND Time Machine?

Bear with me guys, I'm not sure where to put this question. I figured that because my Macbook Air (and it's limited storage space) was the reason for my needing an external HD I thought this would be the best place.
My MBA has run out of storage and I bought a Seagate External HD to move my stuff onto. I guess my question is: What's the best way to combine the external HD with the MBA? Here are a few of the things on my mind:
-Most of the space is taken up by my user folder right now such as itunes, photos, etc. If I copy that folder to the external drive it would alleviate a large part of my issue, at least for the time being. Eventually I will hit the storage capacity as I add applications over time I guess, so this is a temporary solution (although I free up 27gb of space this way). Can I designate a folder on the external drive as the default for programs like imovie and iphoto like I can with itunes?
-I KNOW there is a way to set the external drive as some kind of default drive but is this feasible? It would be a hinderance if I needed to have it connected at all times to access even applications (which I assume to be the case?
-I also wondered about partitioning the external HD and using one partition for additional storage and the other for time machine? It's a 1TB hard drive, and I figure I could make a 100GB partition to use with time machine (my MBA only has a 64gb capacity) and use the other 900GB for files. Is this even possible or does time machine need it's very own separate drive?
Anyway, this doesn't necessarily ask many specific questions and I apologize if it appears a little disjointed. I'm looking for help and opinions on the best way to use this new piece of equipment to compliment my MBA. Any thoughts are appreciated.

While it is possible to partition an external drive and use one partition for files and the other for Time Machine, there's actually very little point in doing so. The reason is that in your scenario, you'd be storing all your files on the external, meaning that pretty much all there would be on your MBA internal drive is MacOS and your applications - the very things you can easily restore in the event of failure - while all your files would be on the external, where they are not being backed up.
It is also possible to use an external drive as the boot drive for the MBA (easiest done by cloning the internal drive to a partition on the external, and then setting that partition as the startup drive in the Startup Disk preference pane) but that would still require you to wipe at least some of your files from the internal, and mean that the contents of your external drive are not being backed up. It would also mean that your MBA would run pretty slowly when booted from the external.
Rather better, in my view, would be to use the external as the primary store for all non-essential files - your complete iTunes library and all your documents, files, video, photos etc, and then copy back to the MBA just those items you actually need for any day or week's activities. Then get a second external to use for backing up the first!

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor

Please send me some sample codes of ALVS using function modules only

Hi,
i am new to alvs
Please send me some sample codes of alvs using function modules only.
My mail id is [email protected]
Thanks & regards,
hari priya

hI
http://www.sapdev.co.uk/reporting/reportinghome.htm SPECIAL FOR ALL ALV PROGRAMS WITH EXAMPLE CODES
Check the below links :
http://www.sap-img.com/abap/sample-programs-on-alv-grid.htm
http://www.sap-img.com/abap-function.htm
http://www.sap-basis-abap.com/sapab034.htm
http://www.erpgenie.com/abap/example_code.htm
These all are very simple ALV programs ,good luck
<b>Reward if usefull</b>

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

When i try to use my apple acocunt for the first time i get a prompt to put in my CC info but after i agree to the TOS the ipad only displays a black box no text, ive erased the ipad and still the same thing

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Iphone app to send only photos to computer, using wifi

I had been using an iphone app for a few months that allowed me to select a photo(s) on my iphone using an app, and then send it to my computer on the same wireless network. I guess it was using webdav. It did not need a companion app on my pc. In changing my computer that I wasysing to sync and backup, I no longer have that app on my iphone. I have searched in the app sotore and cannot find any application that does just that. I do not recall the name of the app.
Thanks

I'm using the iPhone app PhotoToMac that does this but only from an iPhone to a Mac.
No webdav involved, the photos are transferred to a shared folder.

Apple Maps - Please reconsider and include Google Maps. As a long time Apple customer, I am disappointed iOS would regress the system and inconvenience millions because of a vendetta that should never hinder users. Not only does the transit feature I used

Apple Maps - Please reconsider and include Google Maps. As a long time Apple customer, I am disappointed iOS would regress the system and inconvenience millions because of a vendetta that should never hinder users. Not only does the transit feature I used religiously no longer exist, but clicking on an address in a website now directs users to a poor Google Maps interface. I am surprised to see such a effortless update from a company squatting on the resources to make a change its customers are asking for.

varjak paw wrote:
Apple has documented an API to provide add-ons to the Maps app in the iOS 6 SDK, so that such add-ons are possible is absolutely not a guess that the capability is there. As to whether someone will indeed develop an add-on for any given transit system, that would be a guess, yes, but at a couple of companies at least have already announced plans to do so.
In select cities and areas - so now I'm going from being able to supply this information myself to either wait for someone to supply an app or write an app myself... This is not feature progression but feature regression. Adding transit times or a specific overlay should not have to be something you need to do through code via an API. So no dice... Your guess that we will see better transit information is just that - a guess, nothing else.
If you don't agree with that editorial, you are certainly free to do so. I provided the link as food for thought for those who have been questioning Apples' decision to drop Google's maps from iOS. Whether or not you agree with Brad's analysis or that of anyone else is up to you.
But on that central issue the editorial fails - it's is not the true tale of why Apple made their move and therefore useless even as "food for thought" (because it's guesswork).

How can I set up an email user as "send-only" (no mailbox for receiving)?

Can anyone tell me how I can set up an email account that can send emails but not receive emails.
Our Web application has been using a generic email address "[email protected]" in all of our PHP Web applications as the sending email account. I have this user set up in WORKGROUP ADMIN as a proper account. However the account gets tons of SPAM emails and is constantly filling up.
Also, all of the email accounts require SMTP authentication to send emails.
Is there any way to identify an account as a send only account so we can generate emails from our Web applications that cannot be replied to?
Thanks for the help
-- Jon

Doing so will cause issues. If you send out mail which to an outside server appears to be non existent, mail may be rejected and you may even be blacklisted.
You can remove the account from WGM and add a role account as an alias send to /dev/null. This will look to the outside world like an existing address, but simply be discarded on your system. You should however include a working address in your mailings for people to be able to respond.
Assuming you use local domains, edit /etc/postfix/aliases and add:
noreply: /dev/null
(you can change noreply with the sender used in your PHP apps, but I'd probably change the PHP apps to use noreply as this signals to people receiving your mails that this address is unattended).
When done, issue:
sudo postalias /etc/postfix/aliases
sudo newaliases
sudo postfix reload
HTH,
Alex

Sending messages thru email and SMS without using XMS APIs

Hi,
I already have some working code that sends messages thru email and SMS. But currently it uses XMS APIs therefore I have a dependency on files like wdk.jar. I want to try and eliminate using the XMS APIs and only use soap to send these messages. I was wondering if there is some documentation available on how I can do this. Also if there a lot of code that needs to be written to do that.
I primarily want a very simple application that sends only string messages and reduce my dependencies.
I would really appreciate all the advice.
Thanks,
Sonali Nath

Hi,
You may refer to the following links to check if they help:
Sending SCCM Status Messages from MDT Scripts.
Send SCCM task sequence email report
Regards,
Sabrina

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.

Hi,
I had never heard of someone using the iPhone Number as the ID in the iMessages account in the Mac version.
i.e without adding an Apple ID
iMessages does allow iPhone numbers and mine lists mine.
I would try this.
Sign Out of the iMessages account and Quit Messages
On the iPhone in Settings > Messages remove the Apple ID
Set the iPhone to Airplane mode for a few minutes (to break with the Server)
On starting the phone up again check the iPhone Number is ticked for iMessages.
If it is add the Apple ID
On the Mac restart Messages
Add the Apple ID
At this point you should get a pop up or two saying the iPhone is using the Number and Apple ID.
Accept these and they get added to the Receive At list and Send From drop down.
9:41 pm Monday; October 28, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

What setting need in SAP R/3 if i want to send only changed records to XI

Hi All
     I had problem while sending Idoc from SAP R/3 to XI
     Thing is i want to send only the changed records in Idoc not all so what
     settings i need to in SAP R/3 ?
     Can any one explain me how to do this...
Adv thanks and Points
Prasad K

Hello Prasad,
Many cases you will find that there are standard message types for change idocs.
For Instance let us take Purchase order:
--For Order create ORDERS is the message type.
--For Order Change ORDCHG is the message type.
You will just need to maintain both in the outbound parameter in the Partner Profile in we20.
From XI side this means there are separate interfaces -- ORDERS.ORDERS02 & ORDCHG.ORDERS02 for instance. You just need to treat this as different interfaces and Configure. One last thing . If the basic type is same eg. ORDERS02 then you can use the same message mapping program for both Change and create if you want -- although the interface mapping will be different.
Make sure to maintain metadata in IDX2 in XI.
Cheers,
Himadri

My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

Only one way to find out: call AppleCare.

Send only release (no agreement) to supplier using POXPOPDF (PO Output for

Similar Messages

Maybe you are looking for