Send output through email to multiple recipients

HI Friends,
We are using the output type external send. But the standard PO process will send email to only 1 recipient. The email will be taken from the customer master where email is flagged as Standard.
Is there any other way (or any user exit) to send invoice to a multiple recipient (TO and COPY-TO) maintained in customer master?
Appreciate your input.
thanks in advance
Govind.

Hi,
Have you tried the following func module in Print prog:
SO_NEW_DOCUMENT_ATT_SEND_API1
Ashvender

Similar Messages

Send output through email to multipul Recipients

We are using the output type external send. But the standard PO process will send email to only 1 recipient. The email will be taken from the customer master where email is flagged as Standard.
Is there any other way (or any user exit) to send invoice to a multiple recipient (TO and COPY-TO) maintained in customer master?
Appreciate your input.
any inputs for my issue??
thanks in advance
siva
Message was edited by:
siva narayana

Hi,
Have you tried the following func module in Print prog:
SO_NEW_DOCUMENT_ATT_SEND_API1
Ashvender

How to send Outputs from orders to multiple recipients

Hi,
I have a requirement to send the same output (order confirmations) to multiple contacts of the same customer. the contacts are set up in VAP1 and linked to the sold to but what is the configuration needed to enable this functionality? At the time the order is confirmed, we need to trigger these outputs by emails or by fax (can be any combination here) as required.
Appreciate any help and glad to provide nay clarifications if needed.
Thanks!

Wouldn't it make more sense if the customers actually maintained their own distribution lists? They could then give you an email address of the distribution list, which they would maintain internally.
Otherwise imagine what would happen if the customer's employee leaves the company. First of all - how would you know? Second, you would need to make changes on your side (x 500 customers). In the best case you would just end up with an undeliverable email but in the worst you could expose the customer's private information. This is just a lawsuit waiting to happen IMHO.
If you still want to go ahead with this idea, this would require some ABAPing. Actually the same question has already been asked (with the same result):
Re: Output to more than 1 email

How to use Add_Delivery_Option to send an email to multiple recipients

I have the following code before i submit a concurrent request:
B_Delivery_Success := Fnd_Request.Add_Delivery_Option(
'E',                    -- EMAIL
'Enter subject', -- SUBJECT
'[email protected]',          -- FROM
'[email protected]'          -- TO
,NULL               -- CC
which correctly sends an email with attachment. However i need to send the email to multiple recipients. How can you enter multiple names against the 'TO' parameter. I know that i can repeat this again and again with a different email address each time, however there must be away to use this code once with multiple addresses?
Edited by: user974582 on 09-Oct-2012 01:23

Not sure about the API but there are other ways to achieve it i.e. through alerts.. You can refer below
Can Concurrent Request Notifications Work With A Group Email ID [ID 1096850.1]
Cheers,
ND

Can't send emails to multiple recipients any more?

Yesterday I had to send an email to some 30 other people (I only do this occasionally).
It refused to go and I received this error message:-
I have several email accounts but each one was the same.
At that time I could not even send single emails but incoming emails were unaffected.
Later in the day I received this email from my ISP mail account.
Your emails may be blocked – please confirm your alternate BT Yahoo! Mail addresses
Dear Customer,
You’ve received a ‘553’ error message because we’ve upgraded your BT Yahoo! Mail account security to help protect against ‘spoofing’ – when people use alternate email addresses to disguise the real sender, possibly to commit fraud.
What you need to do
We need you to take a few minutes to confirm each of the BT Yahoo! Mail alternate email addresses you use are genuine. If you don’t, you might get more ‘553’ error messages and have problems sending emails. Just log in and follow these simple steps. We don’t ask for any personal information.
This is rubbish and I had a similar one last year which I ignored, as the simple steps were far from simple, and the following morning all was back to normal.
So I ignored this email and tried again this morning.
I was still unable to send emails to multiple recipients but now I can send single emails OK!
Any ideas what is going on?
Is it Mail's fault or my ISP's?

From the error message, it looks like there was a problem with at least one of the addresses ("NONE"). It is possible that a bad address is in the list you tried to send to.
I don't know anything about BT Internet, so I can't confirm the authenticity of the email you received.
You should be able to log into your BT account directly from the web without using any links sent in the email.
The email also seems to indicate you used an alias as the reply-to (from) email address.
You didn't mask out the username for your smtp server and it is definitely different from the from account. This may all be normal, but it does tend to match what the email is telling you.

Question regarding sending email to multiple recipients

Hi All,
I am creating a workflow that will send an email notification everytime a new campaign is created. I've learned that R16 is capable of sending emails to multiple recipients, the only concern I have is I can't find any doumentation on how to do it. It is stated in the R16 Administrator Preview Guide that you can select 'Specific Email Address' and enter multiple email addresses directly, I tried to enter multiple email addresses separated by comma - [email protected],[email protected],[email protected] as an example, but it doesn't work and prompts me to enter a valid email address. Could anybody guide me on how to enter multiple email addresses once the 'Specific Email Address' is selected or how to do it in the expression builder to define the expression that will define the list of emails. I know that using group email addresses can be used as an alternative to this requirement but I hope theirs a way to do this with workflows.
Thanks,
Wayne

According to the R16 Admin preview guide;-
"Send Email to Multiple Recipients
Expression Builder is now linked to the email address text field that is presented when the Specific Email Address
option is selected. Workflow administrators can enter multiple email addresses directly, or click the "fx" icon
beside the field, and use Expression Builder to define expressions that evaluate to one or more email addresses.
The benefit of this feature is that emails can be stored on any text field in the base record and multiple emails can
be sent using one workflow action. "
But how that works exactly is not clear, I have tried commas, semi-colons, spaces, apostrophes, doublequotes, to separate and try to establish the correct syntax without luck.
Bob - Perhaps you can do some digging and find out the correct syntax for multiple addresses?

On OnPremise, Sending email to multiple recipients doesn't work with SendEmail method

Hi,
We are creating a site collection on OnPremise from App by using Sharepoint Client API's (16 version).
After creation of site collection, we are sending an email to all site collection administrators. But we found that email is being sent to the only first person mentioned in the "To" list. For sending email we are using following method "Microsoft.SharePoint.Client.Utilities.Utility.SendEmail()".
We tried different scenarios by passing alternately domain username and email address.
Here are the findings for the different scenarios for the "To" field:
1) "domain\user1; domain\user1" => sends email to first user
2) "[email protected]; [email protected]" => sends email to both emails (at least shows in inbox To field, two occurances of email)
3) "domain\user1; domain\user2" => sends email to first user
4) "[email protected]; [email protected]" => sends email to first user
Here is the code we are using:
EmailProperties properties = new EmailProperties();
properties.To = to.ToList();
if (cc != null)
properties.CC = cc;
properties.Subject = subject;
properties.Body = body;
Utility.SendEmail(context, properties);
context.ExecuteQuery();
Please let us know what is going wrong here.
Thanks in advance for your valuable inputs.
Br,
Shriram
Shri07

According to the R16 Admin preview guide;-
"Send Email to Multiple Recipients
Expression Builder is now linked to the email address text field that is presented when the Specific Email Address
option is selected. Workflow administrators can enter multiple email addresses directly, or click the "fx" icon
beside the field, and use Expression Builder to define expressions that evaluate to one or more email addresses.
The benefit of this feature is that emails can be stored on any text field in the base record and multiple emails can
be sent using one workflow action. "
But how that works exactly is not clear, I have tried commas, semi-colons, spaces, apostrophes, doublequotes, to separate and try to establish the correct syntax without luck.
Bob - Perhaps you can do some digging and find out the correct syntax for multiple addresses?

Error while sending email to Multiple Recipients

Hi,
I am trying to send email to multiple recipients .It works fine if all the email-addresses are valid. If even one is invalid throws exception .I wish to send it all the valid addresses even if some are invalid as this email will be going to 3000 users some of them will be wrong addresses.
Help is greatly appreciated.
-ksg
Exception thrown:
Exception in SendEmail.setAddress as :javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 <[email protected]>... User unknown
Here is the main piece of code:
message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("myhost", "", "");
transport.sendMessage(message, message.getAllRecipients());
transport.close();

Hi there,
Well I find the easiest way is to use a comma delimited string with the following bit of code.
msg.setRecipients(
addrType,
InternetAddress.parse(smtpAddress, false));
addrType will be TO,CC or BCC
smtpAddress is a comma delimited string that I get from the results of a SQL Select request (looks something like "[email protected],[email protected],....,....,...."
The boolean false is to prevent the parse checking the validity of the SMTP addresses as I prefer to deal with this by letting the SMTP server tell me which addresses are no good.
Hope this helps,
SH

How to send invoice through email with output type RD00?

What are the configuration settings to send invoices through email with output type RD00?

Hi,
Please go through the following links:
[E-mail|Email Configuration Settings]
[e-mail|Re: EMAIL BILLING DOCUMENT TO CUSTOMER THROUGH SEND MAIL OPTION IN VF02]
After triggering the output,goto T.Code SOST and process it.
So that e-mail will be triggered immediately.
You can use External send/EDI/simple mail for this.
Regards,
Krishna.

How to send smartform output through email

Hi,
I want to send smartform output through email.....
can u give me sample program to send it through email......
Regards,
Jenifer
MOderator Message: Basic and Frequently asked question. Please search before posting.
Edited by: kishan P on Nov 26, 2010 11:11 AM

Hi Jenifer,
There are many threads available on SDN.
Just have a look at this thread
<<link removed by moderator>>
Kindly search before you post.
Regard
Abhii
Moderator Message: You have been warned many times against point-hunting. Continuing ignoring of the Moderator warnings will lead to account deletion. Consider this your last warning
Edited by: kishan P on Nov 26, 2010 11:09 AM

To send smartform output through email and fax

Hi,
I need to send smartform output through email if the email address is present else if the email address is present then it has to be sent through fax.If both the email address and fax are present,then it has to send an email.
Now the issue is I am able to send the email and I am getting the message as 'Output was successfully issued'.But the entry corresponding to this is not shown in SOST transaction.
Can anyone tell me what would be the reason for this?

HI,
Try to look in transaction SCOT
Regards,
Egle

Action to send email for multiple recipients

Hi gurus,
Currently the user needs to send a email for multiples recipients according to the organization structure.
For example:
The user generates a complaint and the systems must notify by email the department responsible to solve this complaint, sending an email for all employees assigned into this organizational unit.
How should I configure the action to send an email for the whole departament?
Best Regards,
Gabriel Santana

HI Gabriel,
Get the email ID's of all the recipents from orgunit using FMs RH_STRUC_GET and BAPI_BUPA_ADDRESS_GETDETAIL into internal table et_mailid and then using FM SO_NEW_DOCUMENT_ATT_SEND_API1.
For reference check the code below:
*i_message has contents of mail body
DATA: g_sent_all(1) TYPE c,
 g_doc_data LIKE sodocchgi1,
DATA: i_message LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 i_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
 i_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
Fill the document data.
 g_doc_data-doc_size = 1.
Populate the subject/generic message attributes
 g_doc_data-obj_langu = sy-langu.
 g_doc_data-obj_name = 'SAPRPT'.
 CONCATENATE g_sdltime0(2) ':' g_sdltime2(2) ':' g_sdltime+4(2) INTO g_time.
 CONCATENATE c_subject g_time INTO g_doc_data-obj_descr SEPARATED BY space.
 g_doc_data-sensitivty = 'F'.
Describe the body of the message
Information about structure of data tables
 CLEAR i_packing_list.
 REFRESH i_packing_list.
 i_packing_list-transf_bin = space.
 i_packing_list-head_start = 1.
 i_packing_list-head_num = 0.
 i_packing_list-body_start = 1.
 DESCRIBE TABLE i_message LINES i_packing_list-body_num.
 i_packing_list-doc_type = 'RAW'.
 APPEND i_packing_list.
Add the recipients email address
 LOOP AT et_mailid.
 CLEAR i_receivers.
 i_receivers-receiver = et_mailid-email_id.
 i_receivers-rec_type = 'U'.
 i_receivers-com_type = 'INT'.
 i_receivers-notif_del = 'X'.
 i_receivers-notif_ndel = 'X'.
 APPEND i_receivers.
 ENDLOOP.
Call the FM to post the message to SAPMAIL
 CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = g_doc_data
 put_in_outbox = 'X'
 commit_work = 'X'
 IMPORTING
 sent_to_all = g_sent_all
 TABLES
 packing_list = i_packing_list
 contents_txt = i_message
 receivers = i_receivers
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
Regards,
Amit
*Always reward points for helpful answers
Message was edited by:
 Amit Kumar

TS3899 If I send an email to multiple recipients, I cannot open the individual replies on iphone

If I send an email to multiple recipients, I cannot open the individual replies. I can see there are a few replies but have to go to webmail to see them.
Any ideas anyone?

...and even email addresses can be hidden by sending to each recipient using your mail client's "bcc" or "blind copy" field instead of the "to" field.

How to send email to multiple recipients??

Hello Experts,
I got a requirement to send email to multiple recipients. How to approach it as am fairly new to Workflow??
Thanks & Regards,
Mohammed.

Hi,
Do you only want to send mail using workflow or there any other steps. Then you can directly write the code
Search in scn you will find lot of post for that
http://scn.sap.com/thread/3256691

Quotation output through email,

HI All,
How can I send quotation output through email, Can some one provide me a step by step configuration guide for Output determination via email.

Hi,
I hope your using SAP Standard Output type for Quotation. That is "AN00".
This is how you configure that.
Go to Tx: NACE
Highlight "V1 - Sales" line & click on "Output types" button. Then click on "Display/Change" button to come to Change mode.
Then highlight "AN00 - Quotation" line & click on "Details" Icon. (Magnifying Glass)
Check whether your using correct Access Sequence for your client in the "General" tab. If not change it to correct one. This will determine whch out out you want to select during processing. You can create you own access sequence using "Access sequences" Option in the NACE Tx.
Go to "Default Values' tab and select "Dispatch time" as "4 - Send immediately when Saving" - this is to send the email as soon as you save the quotation. If you don't want that, select appropriate one.
Then double click on "Processing routines" node. there you have to add Medium as "7 - Simple Mail". Check whether the "Form" & "Program" are correct. This will determine the layout of the output. Else get a ABAP's help to customize that.
Go to "Partner Functions" node & add relevant "Medium" as 7 & enter relevant Partner function that you want to send the output.
Now configuration is over.
Go to Tx: VV11 to create master data. Enter "AN00" as output type & press Enter.
Based on the access sequence, enter relevant data.
Save.
Now check with a new quotation.
Best regards,
Anupa

Send output through email to multiple recipients

Similar Messages

Maybe you are looking for