Send Output to multiple mediam
Hi
WE have a scenario where we want to issue billing out out (ZV01) to Fax, To printer and to email to different people. Is it possible??
e,g, I created a billing document which has output type ZV01, which we want to go through the Fax to the customer, got the customer Email as a pdf document and print at a local printer so that it can be mailed too.
Hi Tridev,
You can assign multiple print medium(Fax, Email, Print, etc) in single output type but you can use one medium at a time and once you successfully process one (like Print) then you can proceed for another one (like Fax) for same output type and so on.
Hope your query has been address.
Cheers ....
Imran
Similar Messages
-
Send output to multiple recepients(Using External send)
Hi
Using the external send for outputs we can send the email of outputs to customers using the email id given in the customer master record , Is it possible to send the output to multiple recepints the same output?
Because in the customer master we can add more than one email id but system will select only one email id for sending the output.
Thanks and Regards,
AnandaHi Raj,
The requirement is for one customer master if i want to add more then one email id and for those email ids , I want to generate a invoice output using VF02 , We can add more than one email id in Customer master but we can not use all the email ids the same time to trigger the output.
If I want to send the output to multiple email ids maintained in the customer master , how i can do that?
Thanks
Ananda -
Sending mail with multiple attachment
hi.
i want to send mail with multiple attachment.
i m succeed in sending multiple attachment but the second pdf is not open.
its given error like "This file is damaged and could not be open.
pls check my code. and
give the solution....
point should be assured...........
hope all u r understand my problem..
& tell me where is i m missing something.
REPORT YSDPASALE1_MAIL LINE-SIZE 110.
data : year_month(6) type c.
data : from_date like sy-datum,to_date like sy-datum.
INITIALIZATION.
year_month = sy-datum+0(6).
CONCATENATE year_month '01' into from_date.
to_date = sy-datum.
ranges : temp for mkpf-budat.
temp-low = from_date.
temp-high = to_date.
append temp to temp.
DATA: P_JOBCNT LIKE TBTCJOB-JOBCOUNT,
jobname like TBTCJOB-JOBNAME,
L_RELEASE(1) TYPE c.
CONSTANTS : l_c_device(4) VALUE 'LOCL'.
DATA : t type i value 0.
DATA : p_email1 like somlreci1-receiver,
p_sender LIKE somlreci1-receiver.
Data Declaration
DATA: gd_recsize TYPE i,gd_recsize1 TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att1 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att2 LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_desc1 TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des,
gd_mtitle LIKE sodocchgi1-obj_descr.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
DATA: BEGIN OF mailstr OCCURS 0,
p_email like somlreci1-receiver,
END OF mailstr.
DATA: mailtab like STANDARD TABLE OF mailstr WITH HEADER LINE.
DATA: ypp18tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis008tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ysd15tab like STANDARD TABLE OF mailstr WITH HEADER LINE,
ymis10tab like STANDARD TABLE OF mailstr WITH HEADER LINE.
SUBMIT YSDPASALE1 with bdt in temp
to sap-spool
with line-size = '255'
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' '
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf.
select yemail as p_email into CORRESPONDING FIELDS OF TABLE ymis008tab
from ymail
where ytcode = 'YMIS008'.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool & mail sending',
'request to be created.'.
ENDIF.
wait up to 3 seconds.
submit YSD_MONTHLY_SALES
USING SELECTION-SET 'MAIL'
to sap-spool
with KEEP_IN_SPOOL = 'X'
with IMMEDIATELY = ' ' "SPACE
WITHOUT SPOOL DYNPRO
AND RETURN
NEW-PAGE PRINT ON
DESTINATION l_c_device
IMMEDIATELY ' '
KEEP IN SPOOL 'X'
NEW LIST IDENTIFICATION 'X'
NO DIALOG.
new-page print off.
IF sy-batch EQ 'X'.
gd_attachment_desc1 = 'YMIS10'.
gd_mtitle = 'Monthly Sales Report'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
PERFORM convert_spool_to_pdf1.
loop at it_mess_att.
move it_mess_att1 to it_mess_att.
APPEND it_mess_att.
endloop.
APPEND LINES OF it_mess_att1 to it_mess_att.
free it_mess_att1.
it_mess_att[] = it_mess_att1[].
insert LINES OF it_mess_att1 into it_mess_att.
APPEND LINES OF it_mess_att2 to it_mess_att .
insert LINES OF it_mess_att1 into it_mess_att.
insert LINES OF it_mess_att2 into it_mess_att.
loop at ymis008tab into mailstr.
p_email1 = mailstr-p_email.
p_email1 = '[email protected]'.
PERFORM process_email.
endloop.
clear mailstr.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ELSE.
SKIP.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM convert_spool_to_pdf1.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att1 = gd_buffer.
APPEND it_mess_att1.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
DESCRIBE TABLE it_mess_att1 LINES gd_recsize1.
CHECK gd_recsize > 0 or gd_recsize1 > 0.
PERFORM send_email." USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email." USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = gd_attachment_desc1 .
gd_attachment_desc = 'YPP18 - Daily Highlights'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Dear Sir,'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'kindly find the attached document'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Do not reply on this mail, It is generated from SAP'.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = ' '.
APPEND it_mess_bod.
it_mess_bod = 'Regards,'.
APPEND it_mess_bod.
it_mess_bod = 'Arpit Shah'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
it_mess_att1
using "p_email
gd_mtitle
'Testing mail generated from SAP'
'Daily Highlights Abstract Report - YPP18'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
it_attach1
using "p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1,w_doc_data1 like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data1-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
For 2nd Attachments
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach1 INDEX w_cnt.
w_doc_data-doc_size = w_doc_data1-doc_size +
( w_cnt - 1 ) * 255 + STRLEN( it_attach1 ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
APPEND LINES OF it_attach1 to t_attachment.
t_attachment[] = it_attach1[].
APPEND LINES OF it_attach1 to t_attachment.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
DESCRIBE TABLE it_mess_att LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS008'."ld_attdescription.
t_packing_list-obj_name = 'YMIS008'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
clear t_packing_list.
for 2 attachments
data : a type i,b type i.
a = t_packing_list-body_num.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = a + 1. "1
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
DESCRIBE TABLE it_attach1 LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
a = t_packing_list-body_num.
clear t_packing_list.
* Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = a + 1.
t_packing_list-body_num = t_packing_list-body_num + 1.
DESCRIBE TABLE it_mess_att1 LINES t_packing_list-body_num.
t_packing_list-body_num = a + t_packing_list-body_num .
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = 'YMIS10'."ld_attdescription.
t_packing_list-obj_name = 'YMIS10'."ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
loop at ymis008tab into mailstr.
t_receivers-receiver = mailstr-p_email. "ld_email.
t_receivers-receiver = p_email1.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'. "X "Read Acknoledgement
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
endloop.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Rgds.
ArpitHi Arpit,
Take a look at the documentation of FM 'SO_DOCUMENT_SEND_API1' for parameter PACKING_LIST. I think you should set t_packing_list-head_num to a different value than 0 for the second attachment.
Regards,
John. -
Sending Mails to Multiple Recipients using UTL_SMTP
create or replace procedure send_mail(msg_text varchar2) is
c utl_smtp.connection;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(c, name || ': ' || header || utl_tcp.CRLF);
END;
BEGIN
c := utl_smtp.open_connection('outlook.abc.com');
utl_smtp.helo(c, 'abc.com');
utl_smtp.mail(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.open_data(c);
send_header('From', '"root" <[email protected]>');
send_header('To', '"abc" <[email protected]>');
send_header('Subject', 'WARNING: Salary has been changed');
utl_smtp.write_data(c, utl_tcp.CRLF || msg_text);
utl_smtp.close_data(c);
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
NULL; -- When the SMTP server is down or unavailable, we don't have
-- a connection to the server. The quit call will raise an
-- exception that we can ignore.
END;
raise_application_error(-20000,
'Failed to send mail due to the following error: ' || sqlerrm);
END;
==============
when I execute the above using
sql> exec send_mail('hihihih');
I am getting the mails..no problems...
So..I created the following trigger and used the above procedure to send the mail...
CREATE OR REPLACE TRIGGER test_emp_table_trg
AFTER UPDATE
ON test_emp_table
FOR EACH ROW
WHEN (NEW.sal <> OLD.sal)
DECLARE
l_employee_name VARCHAR2 (240);
l_old_sal VARCHAR2 (240);
l_new_sal VARCHAR2 (240);
l_message VARCHAR2 (240);
BEGIN
/* Gets the employee full name */
BEGIN
SELECT ename
INTO l_employee_name
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_employee_name := NULL;
END;
/* Gets the old Salary */
BEGIN
SELECT sal
INTO l_old_sal
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_old_sal := 0;
END;
/* Gets the new salary */
BEGIN
SELECT sal
INTO l_new_sal
FROM test_emp_table
WHERE empno= :NEW.empno;
EXCEPTION
WHEN OTHERS
THEN
l_new_sal := 0;
END;
l_message:=
'Employee Name= '
|| l_employee_name
|| 'Old Salary= '
|| l_old_sal
|| 'New Salary= '
|| l_new_sal;
BEGIN
send_mail (l_message);
END;
END;
===================
I am not getting desired output..what might be problem friends...I am getting 0 values for old salary and new salary......
One more thing..when i use 2 receipts in the send_mail procedure like this...I added the following lines in the procedure to send to multiple receipents..
======
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
=============
Pleas have a look and correct me, where i went wrong....
Edited by: oraDBA2 on Sep 22, 2008 3:12 PMHi, You can use the following routine to send mail to multiple recipients through utl_smtp.
create or replace package mail_pkg
as
type array is table of varchar2(255);
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
create or replace package body mail_pkg
begin
g_crlf char(2) default chr(13)||chr(10);
g_mail_conn utl_smtp.connection;
g_mailhost varchar2(255) := 'ur mail server';
function address_email( p_string in varchar2,
p_recipients in array ) return varchar2
is
l_recipients long;
begin
for i in 1 .. p_recipients.count
loop
utl_smtp.rcpt(g_mail_conn, p_recipients(i));
if ( l_recipients is null )
then
l_recipients := p_string || p_recipients(i) ;
else
l_recipients := l_recipients || ', ' || p_recipients(i);
end if;
end loop;
return l_recipients;
end;
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
is
l_to_list long;
l_cc_list long;
l_bcc_list long;
l_date varchar2(255) default
to_char( SYSDATE, 'dd Mon yy hh24:mi:ss' );
procedure writeData( p_text in varchar2 )
as
begin
if ( p_text is not null )
then
utl_smtp.write_data( g_mail_conn, p_text || g_crlf );
end if;
end;
begin
g_mail_conn := utl_smtp.open_connection(g_mailhost, 25);
utl_smtp.helo(g_mail_conn, g_mailhost);
utl_smtp.mail(g_mail_conn, p_sender_e_mail);
l_to_list := address_email( 'To: ', p_to );
l_cc_list := address_email( 'Cc: ', p_cc );
l_bcc_list := address_email( 'Bcc: ', p_bcc );
utl_smtp.open_data(g_mail_conn );
writeData( 'Date: ' || l_date );
writeData( 'From: ' || nvl( p_from, p_sender_e_mail ) );
writeData( 'Subject: ' || nvl( p_subject, '(no subject)' ) );
writeData( l_to_list );
writeData( l_cc_list );
utl_smtp.write_data( g_mail_conn, '' || g_crlf );
utl_smtp.write_data(g_mail_conn, p_body );
utl_smtp.close_data(g_mail_conn );
utl_smtp.quit(g_mail_conn);
end;
end;
begin
mail_pkg.send
(p_sender_e_mail => 'urmail',
p_from => 'urmail',
p_to => mail_pkg.array( 'urmail','othersmail' ),
p_cc => mail_pkg.array( ' othermail ' ),
p_bcc => mail_pkg.array( '' ),
p_subject => 'This is a subject',
p_body => 'Hello Buddy, this is the mail you need' );
end;
/ -
How to send mails to multiple recipents using SO_DOCUMENT_SEND_API
Hi ,
I am using the FM "SO_DOCUMENT_SEND_API".
I am able to send an Excel sheet as attachement, but my requirement is to send multiple mails to the corresponding persons. I tried using coma, colan, semi colan as the separator in the import parameter SENDER_ADDRESS for two different mail id's but it was not useful.
I need to send mails to multiple recipens using the same FM. (keeping one person in to list and two of the persons in CC.)
can any on throw some light on this.
Thanks
rewards will be great.....................................Hi,
The code below demonstrates how to send an email to an external email address([email protected]),
where the data is stored within a .xls attachment.
Instead of the statement, <b>PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.</b>,
use select-options & give the e-mail addresses that you want.
*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
REPORT ZEMAIL_ATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Hope this helps.
Reward if helpful.
Regards,
Sipra -
Split XSLT Output into Multiple Files
I have an XML-to-File scenario working, but now I need to split my XSLT map output into multiple files based on the data. I have been reading the Jin Shin blog on message splitting, but don't know that it pertains to my situation.
XML data getting mapped with XSLT map creates output formatted like this.
<?xml version="1.0" encoding="utf-8"?>
<ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice">
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>15</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>1.25</UnitPrice>
</Details>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>002</LineItemNumber>
<UnitPrice>2.22</UnitPrice>
</Details>
<Header>
<RecordID>HDR</RecordID>
<InvoiceNumber>16</InvoiceNumber>
</Header>
<Details>
<RecordID>DTL</RecordID>
<LineItemNumber>001</LineItemNumber>
<UnitPrice>3.33</UnitPrice>
</Details>
</ns1:ColdInvoiceData>
I currently have this output writing to a file (FTP, File Conversion). A single file is no issue, but I need to send multiple files for every set of HDR/DTL(s). I also need to put the invoice number in the filename (which is working fine as a parameter in my single FTP File CC now).
Can I make this happen with message splitting and maybe a second map (GUI map)? Do I need to adjust the XSLT output XML format to have an invoice level? Is there a better way to go?
Thanks!I made a change to the namespace used on the Messages/Message1 nodes (since the system-assigned ns0 was already being used in my xml data) and now I am getting output.
The problem is that the output matches my input. As aforementioned, I started with just a one-to-one mapping on every node and field.
When I change the mapping to try to force multiple ColdInvoiceData nodes, I get the following error (when my source has two Invoice nodes):
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:ColdInvoiceData[2]/Invoice. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at
When my source has one invoice node, it works ok.
Here is a screenshot of my mapping structure.
http://webpages.charter.net/kpwendel2/ib.jpg -
Simultaneous output to multiple external DACs
Hello,
Just wondering if anyone has figured out how a single MacBook Pro can output audio simultaneously to 2 or more USB external DACs so that you deliver high quality source music signal to multiple zones of a building ?
Can this be done through wi-fi ?
I've been trawling through numerous blogs and posts and can't find anything other than accounts of unsuccessful tries with the Aggregate Sound Device.
Thanks.
ClementHi Raj,
The requirement is for one customer master if i want to add more then one email id and for those email ids , I want to generate a invoice output using VF02 , We can add more than one email id in Customer master but we can not use all the email ids the same time to trigger the output.
If I want to send the output to multiple email ids maintained in the customer master , how i can do that?
Thanks
Ananda -
Sending meesages to multiple receivers
Hi All,
Is it psossible to send an output messages to mutiple receivers without using BPM. If so then how to do it.
Thanks
AbinashHi Abinash,
For sending this to multiple receivers you dont have to use BPM. You can do it by putting the condition in deciding your receiver business system in your receiver determination. For each business system which is there as a receiver you need to provide individual interface determination also...
Cheers
JK -
Send smartform to multiple users using std. smartform interface
Hello All,
Below is the requirement : -
While doing an external send against the custom output type in transaction VF02, smartform is automatically send to the appropriate email address as pdf attachment. This email address can be sold to party/bill to party etc and it is controlled using configuration.
Now the prb is, using such configuration we can send email to single email id only. I need to send the email to multiple users using the standard smartform interface ONLY i.e by using the parameter MAIL_RECEPIENT in the std. smartform interface.
I have alredy evaluated the below workarounds for the above solution, but we need to implement the above functionality using standard smartform interface only.
1) Convert the smartform OTF data to PDF format data and then send the PDF attachment via email to multiple recipients using the standard FM SO_NEW_DOCUMENT_ATT_SEND_API1.
2) Loop at the recipients table and within the loop pass different recipient to the interface parameter MAIL_RECIPIENT of smartform. Hence in this case smartform will be called within the loop which can cause performance issues incase of multiple recipients. Also the mail will be sent individually to every recipient.
3) I have already checked by passing the distribution list the parameter MAIL_RECEIPIENT but it does not work.
Looking forward for your responses.
Regards,
R.DoshiHi
Check if SAP Note 1260015 - Sending mail to multiple recipients is useful for your requirements.
Regards
Eduardo -
Send Invoice to multiple user via email.
Hi,
We are using the output type external send. But the standard PO process will send email to only 1 recipient. The email will be taken from the customer master where email is flagged as Standard.
Is there any other way (or any user exit) to send invoice to a multiple recipient (TO and COPY-TO) maintained in customer master?
Appreciate your input.
ThanksHi Kiran
If you have output type maintained in your system and you want to send it to multiple people then all you have to do is include the partner functions in the output type in transaction NACE or V/30. The system will automatically copy the email addresses from the partner profiles and mail will be sent...
I hope it helps.
Though if it a certain set of ppl that the mail has to be sent to every time a PO is raised then you will have to take the help of your ABAPer. -
One Output with multiple communication types
Hello,
My requirement is to print the document as well as send an email to the customers from the same output. Basically One output with multiple communication types ( PRINT & EMAIL). How to configure this in the output type configuration area? Please reply. ThanksThis should be possible with the same output type,
have the output type defined with multiple medium in NACE under processing routines. (say print out in one line & external send in another).
have the condition record maintained appropriately for different customers with different medium.
Note: if your access has customer, dont think you can maintain both 1 & 5 for the same access.
if this functionality is required, i think you can acheive this by maintaining the output under different access, but this will not ensure the same condition type flowing into the document unless the earlier condition type goes to processed status.
Thanks & Regards
Ilango -
Sending email to multiple address using Utl_Smtp
Hi,
I want to send email to multiple address using the Utl_Smtp feature.
When I am sending email to one email address in the To:Field it works fine.However, when I send
to multiple address I am getting the below error.I am using a table(Email_test) to store all email id.
Error report:
ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address
ORA-06512: at "SYS.UTL_SMTP", line 20
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
ORA-06512: at line 48
29279. 00000 - "SMTP permanent error: %s"
*Cause: A SMTP permanent error occurred.
*Action: Correct the error and retry the SMTP operation.
I am trying two options both ways I am getting error
Option 1:
Selecting two email id indivually in the select query as below
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
Option 2:
Is there a way to use option
select email into v_Recipient1 from Email_test where Key_name='U4';
===========================================================
Create table Script
===========================================================
create table Email_test (Email varchar2(100),Key_name varchar2(10));
insert into Email_test values ('[email protected]','U1');
insert into Email_test values ('[email protected]','U2');
insert into Email_test values ('[email protected]','U3')
insert into Email_test values ('[email protected];[email protected];[email protected]','U4');
select * from Email_test
[email protected] U1
[email protected] U2
[email protected] U3
[email protected];[email protected];[email protected] U4
select * from Email_test where Key_name in ('U1','U2','U3')
[email protected] U1
[email protected] U2
[email protected] U3
select * from Email_test where Key_name='U4'
[email protected];[email protected];[email protected]
=======================================================
PL/SQL Block
===========================================================
declare
v_From VARCHAR2(80) := '[email protected]';
v_cc VARCHAR2(80);
v_Recipient VARCHAR2(80) ;
v_Recipient1 VARCHAR2(80) ;
v_Recipient2 VARCHAR2(80) ;
v_Subject VARCHAR2(80);
v_Mail_Host VARCHAR2(50);
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
begin
--Mail Host name
select VALUE into v_Mail_Host from Server_info where server_name = 'SMTPServer';
select email into v_Recipient1 from Email_test where Key_name='U1';
select email into v_Recipient2 from Email_test where Key_name='U2';
v_Recipient := v_Recipient1||';'||v_Recipient2;
--for CC
select email into v_cc from Email_test where Key_name='U3';
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_cc); -- To CC recepient
utl_smtp.Rcpt(v_Mail_Conn, v_BCC); To BCC recepient
utl_smtp.Data(v_Mail_Conn,
'Date: ' || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
'From: ' || v_From || crlf ||
'Subject: '|| v_Subject || crlf ||
'To: ' || v_Recipient || crlf ||
'Cc: ' || v_cc || crlf ||
'Content-Type: text/html;' ||crlf ||
--'Hello this is a test email');
crlf || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf );
utl_smtp.Quit(v_mail_conn);
end;
Any suggestion how to approach this issue.
Thank youSimple Mail Transfer Protocol RFC 5321 specifications.
RCPT TO:<forward-path> [ SP <rcpt-parameters> ] <CRLF>
The first or only argument to this command includes a forward-path
(normally a mailbox and domain, always surrounded by ">" and "<"
brackets) identifying one recipient.In other words, you can only define a SINGLE mailbox address at a time. Multiple addresses requires multiple repeats of this command verb, once per maibox.
Do not confuse this and the To: tag line in the Mime header that contains a comma delimited list of recipients. That tag line can contain anything - it is not parsed, not checked, and not verified as matching the actual recipient mailboxes as specified via the RCPT TO verb. -
To send output of report to the mails ids as an excel attachment
Hi all,
I have a requirement that I have created a report using classes. Now I have to send output of my report to the particular mailids as an excel attachment.
Can anybody help me?
Regards,
Azra.Hi,
Refer Below links.
Re: Formatting Excel Attachment output in SO_DOCUMENT_SEND_API1
Information Broadcasting with Excel Report as attachment
Zip the excel and send as mail attachment
Regards
Md.MaahboobKhan -
I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered
Hi waqaskhan91,
Thank you for visiting Apple Support Communities.
If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
iOS: Troubleshooting Messages - Apple Support
If you only see this behavior with a few contacts, you may want to try these steps first:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Best Regards,
Jeremy -
Can't send emails to multiple recipients any more?
Yesterday I had to send an email to some 30 other people (I only do this occasionally).
It refused to go and I received this error message:-
I have several email accounts but each one was the same.
At that time I could not even send single emails but incoming emails were unaffected.
Later in the day I received this email from my ISP mail account.
Your emails may be blocked – please confirm your alternate BT Yahoo! Mail addresses
Dear Customer,
You’ve received a ‘553’ error message because we’ve upgraded your BT Yahoo! Mail account security to help protect against ‘spoofing’ – when people use alternate email addresses to disguise the real sender, possibly to commit fraud.
What you need to do
We need you to take a few minutes to confirm each of the BT Yahoo! Mail alternate email addresses you use are genuine. If you don’t, you might get more ‘553’ error messages and have problems sending emails. Just log in and follow these simple steps. We don’t ask for any personal information.
This is rubbish and I had a similar one last year which I ignored, as the simple steps were far from simple, and the following morning all was back to normal.
So I ignored this email and tried again this morning.
I was still unable to send emails to multiple recipients but now I can send single emails OK!
Any ideas what is going on?
Is it Mail's fault or my ISP's?From the error message, it looks like there was a problem with at least one of the addresses ("NONE"). It is possible that a bad address is in the list you tried to send to.
I don't know anything about BT Internet, so I can't confirm the authenticity of the email you received.
You should be able to log into your BT account directly from the web without using any links sent in the email.
The email also seems to indicate you used an alias as the reply-to (from) email address.
You didn't mask out the username for your smtp server and it is definitely different from the from account. This may all be normal, but it does tend to match what the email is telling you.
Maybe you are looking for
-
Using javascript to detect JVM
Hi all. I'm trying to use javascript to detect whether the JVM (either j2sdk or j2ee) has been installed and take the user to SUN web page if not. The original MS JVM is not useable for my purposes (does anyone use it?). I know how to detect browsers
-
How to know whether BPC addon ws with in that BI server or seperate
Hello everyone! I am asking this Q from BASIS prespective I know that BPC can be done in seperate server but need to load data again to BPC server also Here my Q is how we can know that whether BPC is added on with in BI system because I am unable to
-
Macro to compare CSV and Excel file
Team, Do we have any macro to compare CSV and Excel file. 1) In Excel we should have two text boxes asking the user to select the files from the path where they have Stored 2) First Text is for CSV file 3) Second Text box is for Excel file 4) We Shou
-
ITunes constantly opens by itself on Macbook Pro (2013)
I've been dealing with this problem for about 2-3 months. I will be on another completely-unrelated program (Chrome or Photoshop) and it will suddenly open up. Sometimes it will play a random song. I can close and Force Quit it all I want to, but it
-
I recently moved from PC to Mac, and I have about 5GB of files that I am unable to add to itunes or sync to my ipod. This is because they are all in WMA format, and I have no idea how to convert them to ACC or MP3. I see the "convert selections to AC