Send Plan to Vendor Automatically

Dear Sir
Ours is a production unit (assembly line) we use lot of components. So I want to know is it possible to send plan directly to Vendor by E-mail from SAP.
Thanks & Regards
Vishal

hi
check this sap note we will get details steps
SAP Note 191470 - Purchase order as an e-mail
this is from sap note
When using external mail, the following basic settings are required:
1. You must maintain an e-mail address in the address in the vendor
master.
2. The same applies to your own user master. You also have to specify an
e-mail address there in order to identify the sender.
o Note that it is not possible to change the e-mail address of the
vendor via the SAP purchase order transaction (ME21N, ME22N, and so
on).
o You can only make a permanent change using the vendor master
transactions XK02 or MK02.
o You can use a temporary email address in Transaction ME21N.
3. For the output type for default values, a communication strategy needs
to be maintained in the Customizing that supports the e-mail. You can
find the definition of the communication strategy in the Customizing
via the following path: (SPRO -> IMG -> SAP Web Application Server ->
Basic Services -> Message Control -> Define Communication Strategy).
As a default, communication strategy CS01 is delivered. This already
contains the necessary entry for the external communication. Bear in
mind that without a suitable communication strategy it is not possible
to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine
'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction
MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The
prerequisite for a correct sending is that the node is set correctly.
This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF
Regards
Kailas Ugale

Similar Messages

  • Sending Production Plan to Vendor / Supplier

    Dear Sir
    Ours is a production unit (assembly line) we use lot of components. So I want to know is it possible to send plan directly to Vendor by E-mail from SAP.
    Thanks & Regards
    Vishal

    Hi Vishal,
    Sending out Production Plan to Vendors by email is possible but given nature of dataset involved (not documents in form of Production Orders) it may not be a very feasible option. Instead either develop a report to extract relevant Production Plan data and send it out as email.
    But better look at Supply Chain Collaboration applications like SNC Supply Network Collaboration that has Outsourced Manufacturing processes catering to these kind of supplier / vendor collaboration requirements.
    Hope this helps.
    Somnath

  • New business scenario for reapir from customer and sending them to vendor.

    Hello team,
                          We have a scenario where we need to configure in the system -
    We  recieve a material from my customer for repair.We need to send this to my vendor who will repair  it and send them back to Us. On this we  recieve revenue from the customer and pay i pay half amount my vendor for the service.
    We are following above scenario in SAP as
    In the first step
    The production team create a serviece order in IW31 for the material that need to send to the vendor, which was recieved from the customer. When service order is created in the back end a Purchase requisition is created.
    In next step we  created a  PO w.r.f to the above PR and  we need to send this  to vendor on subcontracting so that we can track the material from him after the repair.
    The problem is --- When PR is created automatically during serviece order creation (iw31) we are unable to create Po with Item category L (subcontracting) because PR is not created with L.We are even unable to change L in  PR since it is created automatically at the background.We ried to change the field at document type in spro. But no luck.
    Pls let us know is there any other business process where we can handle this situation or any technical help to change the PR.
    Regards,
    L.chaitanya.

    Hi,
    please work out in this way...
    It can be done Using PM02 and PM03 control keys. Select the operation row select the External button in the bottom u will find Sub con check box u can click it .The prerequisities are create a material BOM in the bom as L item select a row and click the item which will be near to the header cap 2nd tab status/long text click it .Mat. Provision Ind select Lor X if it is not available go to IMG setting.Plant maintenance ->Master Data in Plant Maintenance and Customer Service->Bills of Material->Item Data->Define Material Provision Indicators, K&L will be standrad create S Rework Material,XRework Material from Subcontrmake a tick mark in Recursivity of Subcontracting Component and save it . while creating the material to the operation to be assigned from bom then in the component select the row go to the general button in the bottom then Mat. Prov. Ind will be there select rework material the system allows you to proceed further . save the order then check the PR it will be Account assignment will be F and Item categeory will be L selected automatically.
    Then create PO then do MB1b (prerequsitie the material should have stock)using PO reference( movement type 541) the it will be moved to the vendor stock (check with mmbe)
    Aganist PO Material sent to the vendor .While doing Goods Recipt do with MB01with movement type 101, now u can check the stock in mmbe it will be in storage location...
    Kuber

  • Need to pick customs vendor automatically.

    Hi All,
    I am maitaining the condition for customs through MEK2 and the same value is apperaring in the PO. But i need to make the system to pick the cusotms vendor automatically, for this what settings i need to do or where should i need to maintain it.
    Please note I have 2 customs vendor based on the plant i may take the respective vendor. please guide.
    Rgds
    Srini

    HI,
    Option one.-Create Infor record first
    Enter the cond type in MEK2 choose ur key combination(For eg Material info record) enter the values and select the line and click on lens icon and enter the vendor at the bottom.Then create PO ur custom vendor will come automatically in PO.To view this select the condition type & click on lens icon u can see the vendor entered in MEK2.
    Option 2
    Create Info record and in that enter the condition type select ur condition type and go to the lens icon in the bottom u can enter the customs vendor and save.When u create the PO the vendor will come automatically ib the PO .To see this vendor select the cond type & click the lens icon u can see the vendor entered in IR.
    Note-All the import condition should be created as planned delivery cost in condition type.In the condition type give the condition category as B.
    Note-Only u make one vendor default in PO u have change if u want to enter the alternate vendor
    MURUGAN
    Edited by: Murugan mgl on Jul 20, 2009 9:18 AM
    Edited by: Murugan mgl on Jul 20, 2009 9:41 AM

  • Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?

    Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
    I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?

    Thank you Todd, I was able to get it to work but I do have a few more questions...
    1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
    2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
    (It was actually much longer than that)
    Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
    Thanks,
    Evan

  • How to send e-mail notification automatically when a record is inserted?

    Dear All,
    Could anyone kindly tell me how to send e-mail notification automatically when a record is inserted through a form in Oracle Portal Release 2?
    Regards,
    Ridwan.

    Hi,
    If you are writing a form on a table then you can call the mail API from a database trigger on the table. If it is a form on a procedure, you can make the email call from the procedure. To know more about sending mails from plsql go to
    http://www.quest-pipelines.com/newsletter-v2/smtp.htm
    Thanks,
    Sharmila

  • When I send PO to vendor, Attachements also to be sent along with that mail

    Hi Guys,
    Right now, when I release a PO or issue 'mail output' in message types and save it, it sends PO priview to vendor thru email.
    I think its happening with config part which is done in NACE (custom message types...driver program...form routine).
    Now the requirement is when PO sends to vendor, the documents which are attached to PO item also to be sent as attchments with that mail.
    I have logic with me to get the documents of PO and to send them to vendor thru a seperate mail. But per requiremnt, it should happen only at the time of PO release.
    Can somebody guide me how & where to place my logic in order to work it as mentioned above?
    Points awaiting...

    Hi,
    If the email should be sent to vendor only when the PO is released, the simplest way to accomplish this would be using a simple workflow which sends an e-mail to vendor with the PO attachment for the event 'released' of the business object BUS2012.
    Hope this helps.
    Regards,
    Hemanth

  • Sending machine to vendor

    Hi MM guys,
    I have one requirement. we need to send machine to vendor for reconditioning and back.
    For this i can create service PO and maintain the price.
    How to send machine to vendor becas not able to craete delivery in VL10B w.r.to PO since no material master were available.
    Please suggest the best method. Please not e we dont have PM module.
    Thanks
    A.Gururajan

    Dear,
    This scenario you can handle by Subcontracting process.....
    Create Subcontracting PO in Tcode ME21N with Item category as "L".
    Enter material in BOM as same as your main material....
    Now transfer stock to Subcontracting  vendor in MB1B Tcode , use MVT 541...
    Now go to MMBE , see you will see the stock provided to Subcontracting  vendor in seperate line.
    Now do the GRN in tcode MIGO wrt PO with MVT 101.
    Regards
    Utsav

  • I need to send sm37 Spool Report Automatically to one or more user ids.

    Hai Gurus,
    I need to send sm37 Spool Report Automatically to one or more user ids.
    Kindly guide me

    Thanks.. .
    is it possible to create Many distribution list for each & every Spool Report ?
    I mean, Can i create separate distribution list for each Reports ?. EX: ME2N Report.
    Edited by: Swetha SAP Girl on Jul 6, 2009 10:11 AM

  • Send PO to Vendor by EDI

    Dear All,
    We have to implement a scenario wherein we can send PO to Vendor by EDI.
    What are the system prerequisites for this at our end & vendor end?Does the vendor require SAP for this?
    Also what are configurations to be done & what are the transactional steps to be followed to implement this scenarion successfully.
    Regards,
    Nandan.

    Hello,
    This thread I found on google, herewith I am pasting for you.
    You can send purchase order via e-mail in SAP system, there are some configurations and pre-requisites to do as follow:
    1. You must maintain an e-mail address in the address in the vendor master.
    2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
    Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
    3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
    4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
    5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
    6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
    7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
    For more details, check out the OSS note :191470
    Regards
    Kedar Kulkarni

  • Sends mail to vendor as well as generates spool

    Hi All,
    1)I am triggering PO for output type ZNEU for external send option(transmission medium is 5).it sends mail to vendor as well as generates spool.
    I want to stop spool generation.
    2) Also i can debug the driver program while i click on print preview buttion in ME22n but i can't debug the driver program while i trigger the output type although i use /h and update debugging
    Could you please help me out.
    Thanks
    MSI

    Hi,
    I need to send a mail to inbox of an user and external mail id of the same user.
    Can I achieve this through a single send mail step?,
    First Check as Mentioned by Arghadip Kar , if not working follow the below method.
    1) Through the FM "SO_NEW_DOCUMENT_ATT_SEND_API1" you can send.
    2) You have to write a Program and Using the above FM you have send the mail.
    3) Refer this [Link|https://wiki.sdn.sap.com/wiki/x/nYKdAw]
    Regards,
    Surjith

  • How to generate payment advice in F110 and send it to Vendors Via Email

    Dear SAP Experts
    Could anybody tell me how to generate payment advice in F110 and send it to Vendors Via Email?
    It would be much appreciated if someone can provide the configuration procedure, thanks so much in advance.
    Cheers & Best Regards
    Ray

    Hi Sama,
    Thanks for your post, here I just share some of my idea.
    The following step is to configure the payment advice.
    In OBVU (payment methods in cpy code) I entered my payment advice form
    In OBVU (payment methods in cpy code)  set  "Always pyt advice"
    In OBVCU (payment method by country)  leave the payment medium program (RFFOD__T)
    For the email sending program, should develp some customized program to realize that, Thanks.
    Cheers & Best Regards
    Ray

  • Is it possible to send Planned Cost from MSP?

    Dear All,
    Is it possible to send Planned Cost (MSP Column = Cost) for resources (Financial Elements) from Microsoft Projects to oracle Projects for a Fully Shared Structures?

    If you are using Rate Schedule then in MSP planned the Hours or Quantity against the Resources then send back the Data to Oracle Projects. System will calculate your Planned Cost using your Hours and Rate Schedule under Workplan Resources. And using your Workplan budget you can always create Financial Budget.
    Khan.

  • Possible ways to send po to vendors

    Hi Experts,
        I have created a purchase order. I would like to send it to vendors now. In which way i can send it? What are the possible ways to send purchase order to vendors ? and what are the configurations we need to send in that way ?
    kindly explain me clearly please.
    Regards,
    Prasath

    hi,
    You can send in many ways ie. via email, fax etc....check the settings at MN04/MN05 to make changes/MN06 to view...
    By this settings only, when you do output, system will show defaults from here only...
    Other settings you can check at NACE...Specially the output type settings...
    EXAMPLE: TO MAIL THE PO...
    Goto NACE .
    u2022 Select EF and click on OUTPUT TYPES.
    u2022 Then select Output Type NEU and click on processing routines .
    u2022 In that you have to add a new entry - medium 5 .
    u2022 Then you need to assign a program, form routine and form.
    u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
    u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
    u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
    u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
    u2022 Now the subject will be PO No. 1800004202.
    u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
    u2022 Now while creating a new purchase order , change the medium to External Send .
    u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
    u2022 Goto tcode ME9F .
    u2022 Execute.
    u2022 Select the checkbox and click on Output Message.
    u2022 You will get a message MAII 00000000000001 generated.
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Apr 22, 2009 10:11 AM

  • Requirements Planning at Vendor Level

    Hi,
    I am trying to get Transaction MDW1 (requirements planning at vendor level) to work, can anyone advise if there are any pre-requisites? Does it only work with MRP areas only?
    Many thanks in advance.

    Hello
    The following KBA confirms that transaction MDW1 belongs to retail:
    https://bosap-support.wdf.sap.corp/sap/support/notes/1697649
    BR
    Caetano

Maybe you are looking for