Send PO to two different external adress

Hi
I need to send my PO to two different external mail adress, is that possible?
now i can send the PO to a sap USE, and i need to add another message to the vendor.
I've tried to set two message record ZMAIL(vendor) and ZUSE(user), but only sap user can receive the PO.
Can you help please
Thanks

Hi,
You may Please check the vendor address view at the field mailing address.Howmany mail ids are provided there?
Take the Extensiom icon there and keep the two mail id's there and provide the sequence there.and fill all the fields there.
Now pl check the ouput type for its driver programe wheather it can fetch the mail id's.
If possible maintain the condition for this combination and select the time as save immediately and try saving the po and check the sost t code.
Please try the same and let me know the comments.
Regards,

Similar Messages

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

How to backup to two different external harddrives

Hi folks,
i want to backup my Leopard Server with Time Machine to two different external FireWire HDs. Is this possible without having to switch the Volumes manually?

Computerdoc wrote:
This is what i do now. Clone with CCC and do a Time Machine backup on another partition. Anyway do you know how to change the TM intervall? I read something about changing the com.apple.backupd-auto.plist in System/Library/LaunchDeamons but that did not change anything for me.
That's usually not a good idea. TM was designed to run hourly, and normally protects you best that way.
If the backups seem too large, there are some apps that can cause extra-large backups. See #D4 in the Time Machine - Troubleshooting *User Tip,* also at the top of this forum. It lists some of the common causes, and shows how to find out what's actually being backed-up each time.
If the size is reasonable, but the backups still take too long, see #D2 in the Troubleshooting Tip for possible causes of that.
But if you really want to alter the schedule, see #9 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

How to re-use one SOAP Sender Channel for two different messages?

Hi!
I have an XI Proxy to SOAP Sync Scenario. 5 messages uses only 2 channels - cc_XI_Sender and cc_SOAP_Receiver. All messages comes from one Sender Channel and goes to one Receiver channel, and it works fine.
When I make the same for SOAP to XI Proxy Sync Scenario, I've got a problem. For example I have 2 different messages (mi_so_MSG_ONE and mi_so_MSG_TWO), so it works, if I had a two different sender channels (cc_SOAP_R1 and cc_SOAP_R2).
If I set the same Sender Channel in both Sender Agreements (cc_SOAP_R1), only one message (mi_so_MSG_ONE) goes without errors. When I send a second message (mi_so_MSG_TWO), in SXMB_MONI this message comes from Business System (BS_TEST) as message type one (mi_so_MSG_ONE), and then in stage of transformation in Interface Determination goes to message mapping program for other kind of messages (MM_MSG_ONE_to_XI_PROXY). And then - error in message mapping.
I try many URLs for both messages:
1) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=&Interface=
2) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=*
3) http://host:port/XISOAPAdapter/MessageServlet?channel=:BS_TEST:cc_SOAP_R1&version=3.0&Sender.Service=BS_TEST&Interface=...MyNameSpace...mi_so_MSG_TWO
Message in payload:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<MSG_TWO xmlns="urn:xxx:yyy:MyNameSpace" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">... some fields... </MSG_TWO>
But in SOAP Header I see that is NOT second message!
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
< !-- Inbound Message   -->
<SAP:Main>
<SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>93233F70-3E2F-11DF-8CD3-00237D301CD6</SAP:MessageId>
<SAP:TimeSent>2010-04-02T08:13:09Z</SAP:TimeSent>
<SAP:Sender>
    <SAP:Service>BS_TEST</SAP:Service>
    <SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Sender>
<SAP:Interface namespace="urn:xxx:yyy:MyNameSpace">mi_so_MSG_ONE</SAP:Interface>
</SAP:Main>
Is it correct that many kinds of messages cannot goes through one Sender Channel ? If not... How can I reuse one SOAP Sender Channel for both this messages?
Thanks for helping.

Thanks for answers!
It means a webservice application will be deployed and exposed in PI using the associated Message Interface and its namespace information in the SOAP Sender channel.
It means only one Sender Channel per one pair of names (name of Message Interface and name of namespace). And it will fail if I change something. And question is: why URL for sending SOAP message contains parameter "Interface"?
"backward compatibility" or "for future use only"?
Nothing happens when I change this parameter, seems that name of Interface comes from first of founded Sender Agreements.
If the structures are the same
No. Structures are different.
Making one structure per all SOAP incoming messages looks workable, but... looks strange (in fact I have a lot of SOAP messages, more than 100 Sender channels).
I found an information, that I can use one Sender channel per many messages with different structures only if I make this messages like different Operations in one Service Interface (in PI 7.1).
But in this case in list of messages in SXMB_MONI I will see only a one name of Service Interface for all my messages and it's not so comfortably for supporting: to take a name of operation that fails I need to goes inside.
In older version of XI (prior 7.1) using one sender channel per many messages allowed without any hints.

IPhone sending texts to two different threads

I have an iPhone 4S running iOS 6.1.3 and I'm on the Sprint network.
To preface, way earlier this summer I sent out a message to several people, all with iPhones with iMessage enabled. Turned out that the contact info I had for one of the contacts on my phone, let's call him Friend 1, was wrong (I somehow had an 8-digit phone number for him, I guess I had just entered the information incorrectly and never texted him before). The texts were obviously going to everyone except Friend 1. So I corrected his contact info with his correct number, made a new group thread, and all was better.
Then two days ago, another one of my friends (Friend 2) in the same group thread turned off his iMessage because he's got a different bug on his phone that makes it freeze up every time he sends an iMessage. Anyway, as I expected, every message I send in the group thread is now green, being sent as an SMS. But everyone else in the thread is still able to send iMessages to it, which Friend 2 receives, despite having turned off iMessage on his phone.
However, whenever I try to send a message, I'm almost always only able to send an SMS. One of my other friends (Friend 3) informs me that all my SMSes sent since Friend 2 turned off his iMessage have been going to a different thread, the one from months ago with Friend 1's number entered incorrectly. I can see every message that everyone else sends in the thread, including those of Friend 1, whose contact info is still correct. Occasionally when I open the thread I'll be able to send an iMessage, which everyone receives, but most of the time I'm only able to send SMSes, which go to the broken thread that everyone except Friend 1 can see. On my phone, though, it looks like I'm sending and receiving every message in the same thread with all the info correct, and every message that any of my friends send in either thread comes into the one thread on my phone with Friend 1's number entered correctly.
Whenever I text Friend 1 individually or in any thread that doesn't have Friend 2 (who turned off iMessage) in it, everything works perfectly. I have no problem in any other iMessage conversation. But the thread with all of us in it together presents these problems where any time I'm not able to send iMessages, the SMSes appear to me to be sent in the same thread, but for everyone else (except Friend 1 who can't see them at all) they go into the old broken thread.
To clarify, whether or not I'm able to send iMessages seems to turn on and off arbitrarily between texts, that is to say, it doesn't seem to be corrolated to whether or not anyone in the thread is or isn't connected to the network. I'll send a few SMSes in the thread, which go to the broken one, and then my phone will be able to send one iMessage, and I can wait as long as I want to send it- the capability doesn't go away with time, but as soon as I send the one iMessage I can't send any more. That iMessage goes to the good thread, and then it'll turn back to SMS for either a random period of time or a random quota of SMSes sent, I can't tell.
Basically I can't understand how this could be happening. I don't get how I could be sending these texts to a number that I don't have in my phone. I don't get why iMessage seems to turn on and off arbitrarily for me alone in this one group thread. I also don't understand how someone (Friend 2) with iMessage turned off can be receiving iMessages in a group thread but can't send them himself or receive them when someone texts him alone, but that's not a problem, just a related curiosity.
I know this is a huge explanation, but I just wanted to be as thorough as possible. If any clarification is needed just let me know. Thank you guys for any help you can provide.

No problem. However, like I said earlier, music is a sync, no problem since that content is on a computer. Contacts and calendar is a sync, no problem since that content is on a computer as well. Just make sure there is a file backup of those components. The next thing is to save pictures and other data. I suggest you have a sync of both computers to the phone, and then do a backup on your personal computer. I would also import the pictures to the personal computer as a bakup, however you can keep them in the Camera Roll if you want after you have imported them. This ensures you have data backed up. Restore the new phone to the backup on your personal computer. Make sure it is set to only sync music.You should get your data, and then it can resync the music. Make sure the work computer is only setup to sync manually and to sync just contact and calendar data and nothing else. Connect the phone to that computer and sync. You should get your contacts and calendar. Now you might get a warning box saying the iPhone is synced to another library, but don't worry since the work computer is not setup to sync music. Now remember, this is my 2cents worth based on what information you provided. You cand decide if you want to do this or not and you make your choices on your own.

I have two accounts with two different email-adresses, but Adobe Manager mixes them up.. What to do?

The first account was a free trial account, but it is no longer active (i think...)
The second account is a CC Student and Teachers Edition.

Hi Jacob Leeberch,
Welcome to Adobe Forum,
I found that this e-mail address that is in forum is not assigned to any CC. The best option would be to log out & log back in of the Creative Cloud desktop App as this would activate the subscription.
Please log in with the Adobe ID that has active subscription. Please feel free to contact us at http://adobe.ly/yxj0t6.
Kind Regards,
Rajshree

XI question on two different sender

Hello all,
I want XI to pick up two files and send them to two different receivers based on some conditions. This condition will be done via message mapping.
Is it possible to do it without BPM? If we can do it with BPM how? I don't want to use transformation step becasue don't want to combine the messages.
Regards,
N.S

HI,
I think you should use BPM. We have one exact example see the below link
http://help.sap.com/saphelp_nw04/helpdata/en/77/0737133012b24b9d0a12c6df2b1054/content.htm
But without BPM?? i hav'nt tried,
not sure try
to receive two messages from the same machine as two messages and combine them into mltiple mesages and use 1:n , two interface mappings to send to two diffrent systems.the same interface mappings in receiver determination
then other way is if you use the condition to send to diffrent systems.
Regards
Chilla
Regards
Chilla

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac. All give the

WD My Passport 1TB USB external drive randomly ejects from my iMac and MacBook Pro.
The drive is approximately 4 years old. When the drive is plugged in, I can see the data. It appears to be working properly. The only problem is that everyone of my Apple Machines are ejecting it. Several years ago, this drive connected to Mac machines with no problems. I have tried two separate USB cords. I have updated the firmware. I have tried it on my MacBook, two different Macbook Pro's, and my iMac.
All give the same result of random ejection of the drive and the error message of:
Disk Not Ejected Properly
Eject "1TB Passport HD" before disconnecting or turning......
Searching through the web, it seems this is an common/known problem. Does anyone know the solution?
Thanks,

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

HT201250 Can I use Time Machine on two different Macs to back up to one external drive?

Can I use Time Machine on two different Macs to back up to one external drive?
I have one 1T Western Digital backup drive that works well with Time Machine and my MacBook Pro. I now want to back up my wife's MacBook Air using Time Machine on her Mac and want to know if I can use the same WD external drive or if I need to get a 2nd back up drive? If I can use one external drive for the two Macs do I need to do something special on the drive or will Time Machine do it automatically?

Yes. You will need to configure Time Machine preferences on each computer to backup to the same drive. Note that you cannot connect the backup drive to both machines at the same time.

HT1364 I used these instructions to move my i-tunes library to the external hard drive that two different home pc's access. My playlists do not show on both Is it possible to have one i-pod synch amid two different computers that use the same library?

I have a sole i-pod and two pc's, used the instructions for "iTunes for Windows: Moving your iTunes Media folder" in the hope that I could synch my one i-pod between two different computers that are sharing the same library. Is it possible to have two seperate computers that only share an external hard drive (one wireless, one not) ? When I am looking at a shared library should it appear the same on both machines (ie: playlists/ purchased list etc)?

If it is moved correctly, playlists will display on both computers and it should be possible.
Close iTunes.
Hold <SHIFT> and launch iTunes.
When prompted to create a new or open an existing iTunes library point iTunes to the iTunesLibrary.itl file on the external drive.
The entire library should now show up with all playlists and playcounts.
Do this on both computers.
Keep in mind that only one computer can access iTunes at a time, otherwise errors will occur when each computer attempts to write to or update the iTunesLibrary.itl file.
Syncing may work seemlessly with both computers, but honestly syncing is designed to work with one and only one computer.

HT1660 I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I have two iTunes libraries on two different pc's (one windows and one Mac). Can I consolidate these on an external hard drive?

I'm sorry I just saw the last post. I had two users on my hard drive, one for me and one for my daughter, but I am not sure what you mean by partioning my external????? I have heard the term before, but don't know how to do it. I am having serious crashing issues with this computer and believe I really need to do a clean install. I just want to make sure everything for both ipods is safe (is???? I think so, everything is......I hate when the English language does this to me!)

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Can we send the same message two different recievers with sequence

Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?

Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository

Host setup having two different Sender Id's for EDI X12 over generic exch

Greetings. I am attaching the document which has screen prints of B2B set up that we have done for a trading partner called PETsMART and the Host set up for RSC(interchange sender/receiver Id is 9014270492). The TP is sending 850s to us and we are (the sellers) sending Invoices (810). I am pasting the RAW EDI data for the 850s and 997s sent by PETsMART and RSCs Respectively. Their interchange sender Id is ISA06 173808684. They are sending the Interchange receiver Id as 781318710 for one account and 9014270492 for the second account. But the set up we have for RSC capabilities (EDI_X12 Over Internet) is for only one interchange receiver Id. I mean to say we can support only one Interchange Receiver Id. How can we support both the accounts at the same time? I dont think we can set up two different hosts. Can we? Is there a way to support this?
First the RSC Host set up has been done with interchange sender Id as 781318710 and did the testing with a test PO and sent the FA. Later the intrechange sender Is set up as 9014270492 and did the second test PO and sent the set up. The trading partner can send the POs in production with any of the sender id. How to support both the Ids at the same time?
850 (PO)
ISA*00* *00* *01*173808684 *01*781318710 *080418*0747*U*00401*000004844*0*P*>~
GS*PO*173808684*781318710F*20080418*0747*4006*X*004010~
ST*850*6428~
BEG*00*SA*451941612**20080418~
CUR*BY*USD*1.000~
PER*SU*RON BACORN~
FOB*CC*FA~
DTM*001*20080425~
DTM*002*20080424~
N9*AH*ZZ~
MSG*EDI Test Only~
N1*BT*PETSMART*1*173808684~
N1*VN*Radio Systems Corp*1*781318710F~
N1*ST*NEWNAN DISTRIBUTION CENTER*92*0038~ PO1*1*1*EA*140.41**UP*729849111455*VC*PBK00-11145~
PID*F****2 IN 1 BOXED KENNEL~
CTT*1~
SE*16*6428~
GE*1*4006~
IEA*1*000004844~
Acknowledgement (997)
ISA*00* *00* *01*781318710 *01*173808684 *080418*1049*U*00401*000001032*0*T*>~
GS*FA*781318710*173808684*20080418*1049*1032*X*004010~
ST*997*1022~
AK1*PO*4006~
AK2*850*6428~
AK5*A~
AK9*A*1*1*1~
SE*6*1022~
GE*1*1032~
IEA*1*000001032~
850 (PO)
ISA*00* *00* *01*173808684 ZZ9014270492 *080515*1444*U*00401*000000359*0*P*>~
GS*PO*173808684*9014270492*20080515*1444*359*X*004010~
ST*850*1123~
BEG*00*SA*451943998**20080515~
CUR*BY*USD*1.000~
PER*SU*RON BACORN~
FOB*CC*FA~
DTM*001*20080526~
DTM*002*20080525~
N9*AH*ZZ~
MSG*EDI Test Only~
N1*BT*PETSMART*1*173808684~
N1*VN*Fencemaster*1*9014270492~
N1*ST*NEWNAN DISTRIBUTION CENTER*92*0038~ PO1*1*1*EA*140.41**UP*729849111455*VC*HBK11-10977~
PID*F****2 IN 1 BOXED KENNEL~
CTT*1~
SE*16*1123~
GE*1*359~
IEA*1*000000359~
Acknowledgement (997)
ISA*00* *00* ZZ9014270492 *01*173808684 *080519*1749*U*00401*000001035*0*T*>~
GS*FA*9014270492*173808684*20080519*1749*1035*X*004010~
ST*997*1025~
AK1*PO*360~
AK2*850*1123~
AK5*A~
AK9*A*1*1*1~
SE*6*1025~
GE*1*1035~
IEA*1*000001035~
awaiting your response.
Thanks and Regrads,
Sudhakar Papaganti

Hi,
As per the above suggestion I have added the Interchange receiver Id and redeployed the configuration. The TP is not getting the FA for the second account whose interchange Id is added. The error is as folows.
2008.07.25 at 11:33:16:818: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverQual, val = [ZZ]
2008.07.25 at 11:33:16:818: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [01]
2008.07.25 at 11:33:16:818: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match
2008.07.25 at 11:33:16:819: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeSenderID, val = [173808684]
2008.07.25 at 11:33:16:819: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [173808684]
2008.07.25 at 11:33:16:819: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup key = InterchangeReceiverID, val = [9014270492]
2008.07.25 at 11:33:16:820: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup param = [781318710]
2008.07.25 at 11:33:16:820: RMI TCP Connection(3)-192.168.1.53: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:doLookup Value and doc parameter don't match
Can some body suggest me whatz going wrong here. The ecs file has the value "ZZ" in the valid code list.
Thanks and Regards
Sudhakar

Using an IDOC sending the same message in two different format

i have a message which i have to be sending from one SAP system to another, but the message should be split into 2 different formats using mapping and send to one receiver where the 2 messages are segregated using some ID number. here we will be using IDOC for sender.
kalyan.

Hi,
I think you can go for the multimapping(1:2) and not exactly splitting the message but mapping it one source to two different targets that need to be sent to one receiver...
Just see these blogs on that..
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
You need to go for enhanced interface determination.
Thanks,
Vijaya.

Send PO to two different external adress

Similar Messages

Maybe you are looking for