Send Precalculated workbook to server

Dears,
Is it possible to automatically send / save a precalculated workbook to a specific folder on another server (other than precalculation / BW server)?
Thanks
Dirk

If you have EP and KM available in the landscape you can use KM functionalities to broadcast to a File server.
See attached link for details.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/5c6b686a-0901-0010-8aab-c4d0e5a093a7#q-21 [original link is broken]

Similar Messages

  • Precalculation workbook

    Hi all,
    I'm testing precalculation workbook and getting a problem. My precalculation server is on local PC. When I create schedule with certain date and time, the job will appear in BW server (sm37 can see the job) but without any start condition. So the job will never run. Does anyonoe get this problem before? Thanks a lot.

    I'm not sure whether I understand your problem. But with a process chain you should be able to process your job.
    Make a startprocess an call your job via an ABAP-process functionality in RSPC. This should always work.
    Good luck

  • "Cannot send message using the server....."

    Hi all,
    Considering the nature of the problem I am about to relate I would have to say at the outset that I would be very very surprised if other people have not come across this problem, so here goes...
    We have around 60 users of Apple Mail from both 10.4 and 10.5, so varying degrees of versions of Apple Mail however most if not all are updated to 10.4.11 and 10.5.2.
    We have been plagued with people being frustrated about emails bouncing back with an immediate error which is basically the following...
    "Cannot send message using the server smtp.xxx.com:user
    Sending the message content to the server failed.
    Select a different outgoing mail server from the list below etc etc"
    I am sure a lot of you have seen this error.
    However, it is totally random but I am at the end of my tether with it. It generally revolves around emails with attachments and can be totally random. I was trying to send a screenshot today, very small screenshot, using the Apple-Shift-4 technique, sent the .png file, then saved it out as a .jpg, nothing. Tiny file, around 5k. Got the error above, took it out, sent no problem. Other similar files on the desktop refused to send but a .pdf did. I then thought it might be our server, so sent teh same attachments using my .mac account. Same result and failed to send. Reports from other users in our group show that they too get random results, maybe moving the attachment in the email makes it go, sometimes putting it before your signature, sometimes putting your signature copied and pasted in so many times makes it work, all sorts of methods but all resulting in the same conclusion, Apple Mail can be very unreliable.
    We have even migrated some users to Entourage and the problem disappears. Even to Thunderbird, but those users miss the search capability as it is quicker and more reliable. So they want to go back.
    Considering I have been struggling with this issue back in the day when we were on the Apple Mail related version in 10.4 I was hoping that the version released in 10.5 would remedy the problems. Sometimes I feel it has just got worse.
    Is anyone else experiencing this sort of difficulty in Apple Mail, I really feel isolated and at a loss with how to remedy this for so many users.
    If anyone can share their experiences and how they have got around similar issues in Mail I am all ears and open to any suggestions.
    Thanks everyone for taking the time to read through this. There is more but the experiences are so random it is not worth trying to put it all down.
    Thanks again.
    Gerry McCoy

    I went in to Connection Doctor and. oddly enough, for this Mac account it said I was on Port 25. Si I changed it to Port 587 and saved the changes.
    Still, I have the same problem with the same error messages.
    I go back to the mail preferences > Accounts > Advanced and it shows Port 143 still there grayed out.
    What about SSL - it's not checked.
    Odd that this problem only seems to be from one .mac account emailing to another .mac account. Could the server be down?

  • Cannot send message using the server (null)

    i use mail 2.1.
    i have a .mac account and have three other email accounts attached to my mail account.
    lately, i cannot send any email.
    the switchiing ports fix hasn't helped either.
    this is the error message:
    CANNOT SEND MESSAGE USING THE SERVER (null)
    The server response was: 5.1.0 <email [email protected]>...
    From address does not match authentication.
    Use the pop-up menu below to try a different outgoing mail server. All messages will use this server until you quit Mail or change your network settings.
    Message from: email <[email protected]>
    Send message using: [there is a combo box here with all the four accounts servers listed]
    no matter which one i pick it doesn't work and no email is sent.
    anyone have this error before? or now how to fix it?
    i'd be appreciative.
    thanks
    1.67 GHz Power PC PowerBook G4   Mac OS X (10.4.6)   Sony HDR HC3 HD HandyCam MiniDV

    I was having a similar problem (don't feel like typing all the details)
    I was about to to delete my com.apple.mail.plist, when finally it hit me.
    I ran ethereal (again, I'm sorry, but learning how to use ethereal is a topic unto itself). Following the TCP stream (ie. looking at the smtp messages being sent back and forth) I came across two problems. For some reason my port number was set to 567 or something like that, when it's supposed to be 25, as I had originally set it to.
    Once I corrected the port number I started receiving an error message from the smtp server. It said the return email address could not be authenticated. (using xyz.com as an example) The correct return email address was supposed to be [email protected], but for some reason it was changed to john@xyz in the account settings.
    Anyway, to get to the point, another thing to check is that your return address has been set correctly, and if all else fails, make sure you have X11 installed and use fink to install and run ethereal. This will let you know if you are actually connecting to the server, and will show you any error messages.
    PS. I think this problem started occurring with the last update made to mail. I believe it somehow corrupted my settings. This would explain how my port number could have been changed to the default port number of .mac mail.

  • Adobe Creative Cloud connectivity issue on Websense run network; Failed to send the request to server to get the response - 12002

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

    Hi all,
    I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
    We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
    Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
    <snip>
    11/05/14 08:50:48:184 | [INFO] | |  |  |  |  |  | 5236 | **File download complete.**
    11/05/14 08:50:52:145 | [INFO] | |  |  |  |  |  | 3732 | **File download complete.**
    11/05/14 08:51:05:327 | [INFO] | |  |  |  |  |  | 1784 | **File download complete.**
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | The windows error code is - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | Failed to send the request to server to get the response - 12002
    11/05/14 08:51:06:968 | [ERROR] |  | |  |  |  |  | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:51:06:992 | [INFO] | |  |  |  |  |  | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:51:11:514 | [INFO] | |  |  |  |  |  | 6844 | incrementing the thread. now the active thread count is 2
    11/05/14 08:51:12:519 | [INFO] | |  |  |  |  |  | 6648 | **File download complete.**
    11/05/14 08:51:16:541 | [INFO] | |  |  |  |  |  | 6844 | decrementing the thread count. now the active thread count is 1
    11/05/14 08:51:22:281 | [INFO] |  | |  |  |  |  | 3452 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:51:29:022 | [INFO] | |  |  |  |  |  | 1836 | **File download complete.**
    11/05/14 08:52:22:381 | [INFO] | |  |  |  |  |  | 7220 | incrementing the thread. now the active thread count is 2
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | The windows error code is - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | Failed to send the request to server to get the response - 12002
    11/05/14 08:52:26:971 | [ERROR] |  | |  |  |  |  | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
    11/05/14 08:52:27:383 | [INFO] | |  |  |  |  |  | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
    11/05/14 08:52:27:663 | [INFO] |  | |  |  |  |  | 4908 | resetting intermitent error 9 from to 1 to 0
    11/05/14 08:52:28:733 | [INFO] | |  |  |  |  |  | 6064 | **File download complete.**
    11/05/14 08:52:42:810 | [INFO] | |  |  |  |  |  | 7220 | **File download complete.**
    11/05/14 08:52:45:570 | [INFO] | |  |  |  |  |  | 3788 | **File download complete.**
    </snip>
    There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.

  • Cannot Send Messages Using  the Server

    I am dependent (during the day) on a wireless connection to the Minneapolis Wi-Fi system (U.S. Wireless).
    I've got an e-mail account with comcast and I have successfully interfaced this with the Apple Mail application that came with OS X 10.5.4 and for many weeks have been happily sending and receiving e-mails. But....
    I've been on the road and had to connect with Hotel internet services and I was picking up free WiFi in NYC when I was there.
    I first noticed the problem when I was staying at a hotel in Vermont.
    I would try to send e-mails and I would get the message:
    CANNOT SEND MESSGE USING THE SERVER __________.
    Select a different outgoing mail server....
    Now, I am back home and using my U.S. Wireless connection (which has been really bad lately).
    I keep getting these blasted messages and my mail sometimes goes through but more than often, I get these "cannot send message.." notices and my e-mail just sits there going nowhere in the outbox.
    How can I solve this problem?

    Beside the SMTP name -- smtp.comcast.net -- there is a pair of arrows, with one pointing up and one pointing down. If you click on those arrows you will be presented with a list of all SMTP ever enter (you may only have one), and also the command to Edit Server List. If you choose Edit Server List, you will be presented with a completely new setup window, dealing only with SMTP servers, and that window will have two tabs, one of which is also Advanced.
    From the name, smtp.comcast.net, without your Username appended, would indicate that an Authentication of None is currently in effect. With changes that Comcast has made recently, whether you use Port 25 or Port 587, I believe you would have to use Password Authentication, most certainly if the latter Port 587 is chosen.
    If you click on the link below, although not for Comcast, you will nevertheless see in section 12 through 15, screenshots that cover the SMTP setup that I am describing above.
    http://wildblueworld.com/dishmail.net/howdoi-applemail.php#2
    Ernie

  • OSX Mail - Cannot send message using the server ....

    Hi there,
    Mac Pro with OSX 10.6.
    *Can receive mail, but can no longer send email* using the program Mail.
    Been getting the popup "Cannot send message using the server [shawmail.vc.shawcable.net] for the past 3 days. I hadn't changed anything about my computer, and have had the Mac for 2+ years. So this just started doing it on it's own.
    I had a technical support guy from my service provider even interface with my computer, where he could see my desktop right over the internet, and he couldn't get it fixed either.
    I googled this problem, and found solutions like:
    1. Uncheck "Use SSL" (Done that, and it was never checked "on" to begin with)
    2. Make sure Authentication is set to none, with no password (done that, and it wasn't set with a password to begin with)
    3. Delete [user]/Library/Preferences/com.apple.mail.plist (done that, didn't do anything)
    4. We even totally deleted my account, and started a new fresh one. Didn't work
    The tech support guy did show me a way to email online, using the same email account. That worked, but it's a hassle to go onto a web-based email program -- it's not my preference. So, with great certainty, it's not my service provider, because I was able to send emails on this web-based email program using my email account.
    So there, I'm stumped.
    Hopefully someone can help. What's bizarre is that googling this problem, I have found many other people that say it happens arbitrarily, out of nowhere.

    I can't believe how ridiculous this issue is. i have been searching for days for a solution to this. i have tried EVERY recommendation on these forums and nothing works. It appears that this issue dates back to TIGER. I had this problem back in January and just bagged figuring it had something to do with iweb. I bought a new html program and was able to send out my newsletter last month no problem. Suddenly, one month later- here i am again, unable to send out my newsletter with no help from Apple or verizon, or these forims, or anyone else. To think that a company that I have stood behind and loved so much can't be be bothered fixing such a simple issue that has been going on now through  5 OS's (I am using Lion but I had the issue using leopard as well)  is a disgrace.

  • How to send File on application server for Attachment

    Hi,
    Friends in my application file is to be sent with Email as an attachment.
    all this to be done via servlet for that i have to send the file to application server from there servlet will send mail via Email server.
    How can send this file to server.
    plz help me .
    Thanks

    Hi,
    The following program illustrates the creation of ifle in app server and reading the file from appli server:
    DATA: ITAB LIKE vbakOCCURS 0 WITH HEADER LINE.
    PARAMETERS: P_VBELN LIKE VBAP-VBELN.
    START-OF-SELECTION.
      SELECT *
        FROM VBAP
        INTO TABLE ITAB
    WHERE VBELN = P_VBELN
        PERFORM WRITE_DATA.
        PERFORM READ_DATA.
    *&      Form  WRITE_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM WRITE_DATA.
    OPEN DATASET 'VBAP_DATA' FOR OUTPUT IN TEXT MODE.
    LOOP AT ITAB.
    TRANSFER ITAB TO 'VBAP_DATA'.
    ENDLOOP.
    CLOSE DATASET 'VBAP_DATA'.
    CLEAR: ITAB, ITAB[].
    ENDFORM.                    " WRITE_DATA
    *&      Form  READ_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM READ_DATA.
    OPEN DATASET 'VBAP_DATA' FOR INPUT IN TEXT MODE.
    DO.
    READ DATASET 'VBAP_DATA' INTO ITAB.
    IF SY-SUBRC <> 0.
    EXIT.
    ENDIF.
    APPEND ITAB.
    ENDDO.
    CLOSE DATASET 'VBAP_DATA'.
    LOOP AT ITAB.
    WRITE:/ ITAB-VBELN,
            ITAB-POSNR.
    ENDLOOP.
    ENDFORM.                    " READ_DATA
    If it is helpful rewards points
    Regards
    Pratap.M

  • Re-encode and send to Flash Media Server?

    Hi all,
    I hope this is not a basic question - I'm in a bit of a loop
    with this.
    I need to do two things:
    grab a live video feed from a
    professional DV camera - the feed would be a standard BNC
    (composite) video cable + XLR mic cable or similar. I need to take
    that feed and somehow convert it to feed and broadcast live through
    Flash Interactive Streaming server (...a reliable hardware solution
    would be great!)
    I will also be receiving Windows
    Media MMS feeds from our parent company - can I re-encode live and
    send through Flash Streaming Server in real-time?
    Also - just in case it makes a difference, the camera is PAL
    - not NTSC. So far I've had no problem running tests with a camera
    connected directly via firewire.
    Thank you for any help you can offer.

    My first message got screwed up - so trying again.....
    Hi all, I hope this is not a basic question - I'm in a bit of
    a loop with this.
    I need to do two things:
    1. grab a live video feed from a professional DV camera - the
    feed would be a standard BNC (composite) video cable + XLR mic
    cable or similar. I need to take that feed and somehow convert it
    to feed and broadcast live through Flash Interactive Streaming
    server (...a reliable hardware solution would be great!)
    2. I will also be receiving Windows Media MMS feeds from our
    parent company - can I re-encode live and send through Flash
    Streaming Server in real-time?
    Also - just in case it makes a difference, the camera is PAL
    - not NTSC. So far I've had no problem running tests with a camera
    connected directly via firewire.
    Thank you for any help you can offer.

  • I have 2 email accounts the second one i have only recently added, i have sent one email from my second account but i cant seem to send anymore, it says "cant send email with selected server" i am still able to send emails from my first account. Any ideas

    I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA

    Hi apmichael,
    If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Regards,
    - Brenden

  • Authentication Error while Sending Email from SMTP server.

    Authentication Error while Sending Email from SMTP server.  Can receive emails but cannot send emails from this account. 

    no email account was setup on the phone unless it was issued by your company.
    gmail is required but no server address ports to enter.
    my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
    i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
    i doubt if it's a verizon issue.

  • My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling from the install DVD - but no go: no longer compatible, evidently.. What to do?

    My Mail program has gone south on Leopard on my 27-month old Macbook. I can't send, even though the server details are correct. I tried reinstalling the Mail program from the install DVD, but no go; apparently that two-year old Mail is no longer compatible with my up-to-date Leopard. I tried deleting the account (hotmail) from Mail and setting up a different account (Yahoo). After loading all the inbox two things happened: first, I still couldn't send, and second, when I closed the Mail window the whole inbox then disappeared and doesn't come back. Although I couldn't reinstall the Mail program from the install DVD, would it still be possible to reinstall the whole system from that DVD? If I do, will I lose files or will there be another problem since that DVD is now over two years old?
    Thanks for any suggestions; they will be much appreciated.
    P.S. I've just noticed that now I can't change the desktop picture: I go through the motions in Preferences, but the new picture doesn't appear on the desktop. Is there a systemic problem?

    You are waiting for an apology to something that happened over a year ago? Really? This is why there is a manager in the store. You have a problem with an employee you speak to the manager. Just like you did on the phone. You would have gotten your apology in July 2013.
    Here is the information about your upgrade fee.
    Upgrade Fee
    It is because when you have a problem you (customers) go running to the store and want to take up the time of the reps to fix it. Other carriers have third parties that deal with technical support and those locations are few and far between. VZW provides this directly through their stores. Also, when you subsidize a $650 and pay $200 VZW has to pay $400. Your monthly service fee doesn't begin to scratch the surface of paying that back. Not with all the money that is put into the network and its improvements.
    Then over a year later you get someone on the phone who apologized and offered to waive the fee on your phone and you didn't take it? That offer won't come down the pike again.
    One thing you should know is that all these employees are people and as such they sometimes come off cross. I doubt that you speak to everyone so sweetly all the time. Cut them a little slack and put this whole thing behind you after 15 months. Either upgrade with VZW or move on.

  • I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

    I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

    I tried to send it through gmail and the acct is  a POP acct
    I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

  • SOAP Receiver- Error While Sending Message: 500 Internal Server Error

    Hello,
    Our scenario: IDoc to SOAP
    I have added a third party system in the SLD and have used the same in my ID configuration.
    An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
    I have tested the scenario in ID from Interface Determination and its successful.
    But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
    "Error while sending message:500 Internal server error"
    If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
    Regards,
    Abhishek

    Hello,
    Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
    http://host:port/sap/xi/engine?type=entry
    Also check your firewall settings from PI to the third-party system.
    Hope this helps,
    Mark
    Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM

  • " Error while sending message: 500 Internal Server Error" RNIF Adapter

    Hi,
    I have configured B2B integration as   Sender : RNIF adapter &  Receiver: XI Adapter.
    I am  able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
    Error while sending message: 500 Internal Server Errot.
         Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
    Thanks
    Laxman

    Hope this helps..
    -Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
       Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
    Try taking the payload from sxmb_moni and enter  it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message.   check what is behaviour

Maybe you are looking for