Send query's result via SMS (BW3.0b)

Hi
we need to send query's results via sms.
We're going to use reporting agent (we configured an exception in bex and created a follow up action).
Now I can only send a SAP office message.
In order to send a sms, could you help me to understand which are the necessary configuration?
It is enough configure adequately users?? Is any configuration on the system needed?
Is any additional component needed? we're working on a BW 3.0B release.
Thanks in advance for your cooperation.
Regards,
Stefania Iandolo

Hi dear,
look here to have more info about BEx Mobile Intelligence:
http://help.sap.com/saphelp_bw30b/helpdata/en/f1/50583cf7388362e10000000a114084/frameset.htm
Hope it helps!
Bye,
Roberto

Similar Messages

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

Retrieving Sender Query Details in via BADI (SMOD_RSR00004)

Hi SDN Community,
thanks to a posting by Jim, i have got some of the information i require from the below code.
* Jim Langerhuizen / July 6 2007
* Replace Controlling Area 1000 with hard coded values Z001 and Z002 for Report
My question is how do i ABAP syntax to populate temporary table
l_s_table with the I_S_RKB1D_SENDER table. (this is found when i double click on i_thx_receiver) in the last line of code below.
I wish to then recoginised the fields that contain. do you know the syntax and fields:
- Sender Query name
- Structure element that is drilled down by the user in the query
Thank you in advance
Simon
DATA:
l_s_thx_mapping type rsbbs_sx_map_by_exit,
l_s_range type RRRANGESID,
l_s_table type RSR_S_RKB1D.
DATA:
CompID type RSZCOMPID.
FIELD-SYMBOLS:
<l_sx_mapping> TYPE rsbbs_sx_mapping.
* Map 0CO_AREA 1000 to Z001 and Z002
* In the source query all profit centers are with controlling area 1000
* while in the target query they are split over controlling area Z001 and Z002
read table i_thx_receiver with key fieldnm = '0CO_AREA'
assigning <l_sx_mapping>.

We have taken the approach of customer exit variables in the target query, and specifying variables to catch the required values via the RRI.

Captivate 3 send Quiz and Results via email

I created a Quiz in Captivate 3. Upon completion of the quiz I would like to have all the questions which were answered and the results emailed to me in PDF (or word if possible). In Captivate 3 I can receive an email with the pass/fail completion scores etc. This is not enough information. I need to know which questionss were answered in order to get back to the person who took the quiz and give them further assistance. We have Adobe Connect Pro, but did not purchase the LMS. Can this be done without an LMS? Can this be done in Captivate 4?

Short answer: no
Longer: Search and read through these forums for all the issues surrounding email. Not only is it not terribly reliable but it's also not terribly customizable.
You could possibly do what you need if you've got some Javascript folks there who can parse through the Captivate HTML/JS files and modify them to output interaction data to the email... To do that, I suspect you'd have to setup the lesson to work with SCORM, but then modify the resulting published HTML/JS files to redirect all SCORM API calls to some other functionality that would instead insert the desired information into an email.
It may be better to just get an LMS. ;-)
I think I've seen an article somewhere on Adobe's site, likely by Andrew Chemey, that discussed modifying the published files to send data to a standard database instead of an LMS...so maybe that would be an option, or that could be a base article for modifying the code to work with email. Worth a search of Adobe's site, I suspect.
HTH!
Erik

How to send contacts via SMS from Iphone 3g

Hi, anybody knows how to send or forward contacts via sms??

It still does not work with 3.0
You can send your contacts via mms. At least in Europe.
This is not exactly a nice solution.
I tried this, and the person receiving the mms needed to login to a website via browser to get the mms. The Website was done so bad, that it only allowed you to enter while using Internet Explorer.
I was not able to get the mms with any brwoser that works on a Mac.
Not really a nice solution
Even my first cellphone from over ten years ago was able to perform this task with two clicks.
Sorry for the grawling.. but having the best phone ever, I was wondering if this
will be part of an upgrade soon.

How can I receive a vcard (a contact) via sms?

Is there any way I can receive and send vcards (contacts) on my iPhone via SMS, like I used to do on all my non-smart phones?

Thanks for your reply. However, it doesn't solve my problem. Maybe my question wasn't detailed enough. When someone sends me a contact via SMS my iPhone doesn't receive anything, as if it doesn't recognize the format in which the contact was sent. Contacts are sent through SMS as vCards, just like through e-mail, so the phone definitely recognizes the format, it only doesn't "want" to receive through SMS.

Sending contacts via SMS

Hi!
I would like to get your expert advice on the issue we are experiencing with our Z10 and Q10 units and this is about sending of contacts/business cards.
We are not sure if it is a network-related thing. Tested on two different carriers as well with the same result.
The issue is that while BB Q10/Z10 have the facility to share a contact via SMS, it seems to be not working.
We do it by holding a particular contact that we wish to share, then click share icon.
From the options, we choose 'Text Messaging, fill in the 'To' field, enter a message and then press the send button.
While the .vcf is seen to be attached, nothing happens and a red clock icon just appears.
Recipient does not receive the business card.
Is this a known issue on BB10 devices?
Thank you.
MARVIN

Hi manalotomarvin,
When sending a VCard via SMS, the BlackBerry smartphone switches into MMS mode. If MMS service is not enabled for the device, you will not be able to send the VCard.
I would recommend testing the MMS service by sending a photo to another contact via SMS, to see if that will send. If this fails, I would suggest contacting the wireless network provider, to verify MMS service is enabled.
Thanks.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Send credentials via sms (http APIs) ISE 1.3 patch 1

Hi,
I am trying to send the credentials of a guest user via sms, but does not work. I used the following parameters in configuration of the SMS gateway (ISE):
http://admin:[email protected]/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=admin&destination=$mobilenumber$&api_version=0.08&channel=5&content=
when I run a test in:
ISE: Guest Access--> Configure --> Guest Types --> Contractor --> test SMS
...the result is satisfactory
But my sms gateway does not receive any sms, its as if the ISE not send something
If I put this http://admin:[email protected]/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=admin&destination=999999991&api_version=0.08&channel=5&content=Mensaje+de+prueba
in a web browser, it works!
sorry for my English, thank you very much for your help!
Gustavo.

http traffic (ise: 10.100.156.11 / sms gateway: 192.168.71.10)
ise--> sms gateway
sms gateway ---> ISE
http://admin:[email protected]/cgi-bin/exec?cmd=api_queue_sms&username=admin&password=adm1n123!&content=$message$&destination=$mobilenumber$&api_version=0.08&channel=3

Error occurred while sending query result: 'java.lang.NullPointerException'

I am doing end to end scenario from SQL server to File
JDBC --XI -- File
I am getting the following Error while monitoring the sender CC in RWB
"Error occurred while sending query result: 'java.lang.NullPointerException'
Please Help !!

Hi,
To see the Adapter Error log, try:
http://<XiServerHostName>:<J2EE-Port>/MessagingSystem
Try viewing the Audit Log for each message (Newspaper Icon)
Regards,
Amitabha

How do I cancel the distance between the numbers? I'm having trouble copy phone numbers from the phone book and send it via SMS This problem I've found in the Arabic language, numbers appear in reverse Please help System 6.0.1

How do I cancel the distance between the numbers?
I'm having trouble copy phone numbers from the phone book and send it via SMS
This problem I've found in the Arabic language, numbers appear in reverse
Please help
System 6.0.1

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

Error while sending query result

Hi all,
I am working on a JDBC-XI-IDoc scenario. In my sending JDBC adapter configuration, i have given the Query SQL statement as SELECT * FROM SAP_PROMOTION and Update SQL statement as: <TEST>
But when i go to adapter monitor, i am seeing an error as follws:
Error: Sending query result failed with com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve binding for the given channelId: Binding:CID=875514bc047b3557a5b53dfb5ef4babe; - retry
last retry interval started 10:54:09 2006-05-25
length 60,000 secs
Can anybody help me how to solve this problem.
Regards,
Divija

Divija,
Am not sure if this is the exact cause for your problem, but would anyways suggest that you take a look at it,
classes12.zip is not compatible with JDK 1.4.
From the note : 831162
Oracle JDBC Driver (classes12.zip / classes12.jar) Deadlocks
Q: I have deployed the Oracle classes12.zip / classes12.jar JDBC driver as per the instructions in the XI Configuration Guide.
Unfortunately, I frequently notice hanging database connections. A thread dump taken according to the instructions in note 710154 shows one or more blocking JDBC Sender/Reciver threads and optionally that the JVM has detected a deadlock.
A: The Oracle classes12.zip / classes12.jar driver is compatible with Java 1.2 and Java 1.3 only, but not with Java 1.4. Please upgrade to a current driver (ojdbc14.jar), which does support the Java 1.4 JVM you are using.
Please make sure that you remove classes12.zip / classes12.jar from aii_af_jmsproviderlib.sda prior to adding the new driver as per the instructions in the answer to question #1 above as you will get a class name collision otherwise (all JARs from aii_af_jmsproviderlib.sda are loaded into the same class loader and the driver class name of both driver versions is the same).
Before deploying the updated driver, ensure that the new version is still compatible with your Oracle database server release. For details, please refer to the release notes provided by Oracle.
Regards,
Bhavesh

How to send query results from BW to R/3 abap program

Hi,
I have to bring in query results from BW into a abap program written in R/3...can anyone help me on how to accomplish this(BW to R/3) please...i was thinking if reporting agent or broadcasting should help but i dont know how to get started.
Please help.
Thank you so much.

Hi Vijay,
As i know, you can send data from BW to Flat file or into any table in BW or to BW application server only.
You need 3rd party to send data to different server.
You can use
1. Tcode : RSCRM_BAPI to download query values/results into a table or into a flat file. OR
2. You can use Infospokes to generate files from ODS/CUBE/master data objects to flat files(local/application server) or to a table.
3. Using information broadcasting we can send mail(dont know much options), but i dont think generation of file possible.
You need to trnasfer generated file from BW to R/3 and load into R/3 using BDC or LSMW(if data is low).
I think, you can also use RFC function modules to read data from BW to R/3, plz check with ABAPer.
Hope it Helps
Srini

Sending password via sms instead of email

Hello,
when a user gets a new password the user receives an email with his new password.
I want to know if it is possible to send the password via sms instead of email?
We are running on NW04 SPS19 Patch 7.
When i navigate to System Admin - System Config - UM Configuration - Notification E-Mails theres no way to use the sms channel instead.
Is ist possible to change it anywhere in the portal or do i have to do it programatically?
Thanks
Joerg Heyne

Hi,
check the below thread
Re: SMS messages
Raghu

How to send the vCARD via SMS

Can I send the information any contact as a vCARD via SMS? If yes, does anyone know how?

Matthew, I'm sorry if it seemed like I was biting your head off. I appreciate your suggestions and your time, it's just that I'm two weeks into it and the iPhone has been a huge disappointment. I get "call failed" on the first two to ten tries of every single call, one in two SMS messages fail, calls to me go directly to voice mail without the phone ringing, and when I go looking for basic functionality it doesn't exist. In essence, I don't have a phone. I have a fancy and pretty iPod with a very expensive monthly fee that doesn't include music. My disappointment, however, doesn't extend to your trying to help. Sorry again.

Sending query result as html email

hi,
I have requirement to send query result as html emial to user, is there a possibility to send it?
database is 11.2.3
thanks,
7Z

Google is your friend
http://oracle-base.com/articles/misc/email-from-oracle-plsql.php
https://www.google.nl/search?q=send+email+oracle+database+11g

Send query's result via SMS (BW3.0b)

Similar Messages

Maybe you are looking for