Send/Receive question
Hi Guru:
I have a question about the send/receive when upload the data.
Technically, what should happen when click the send button? We plan to use a 3rd party service for DSE purpose, is the send button supposed to send the file to the 3rd party? How to configure it to make it could send the file correctly? How about the receive?
Thanks.
Eric
Hi Eric,
The 'Send' functionality is to send specific data and fields for classification which is done outside of SPM application. For this the generates the data in a flat file format and places the file in the 'Export folder' specified under 'Global settings'. The system does not send it directly to the external vendor. You will have to pass these files over using an FTP program if necessary. Also please refer to OSS note 1357322 - Performance/completion issues with inbound/export transfer which allows you to control what files are generated.
The receive functionality works similarly. Once the DSE (Data Standardization and Enrichment) vendor sends you the 'cleansed' files you should place them in the import directory provided under 'Global settings'. Using the data management functionality you can then upload them into the SPM application.
Hope this explains the process.
Regards,
Rohit
Similar Messages
-
Data sending receiving question...
I was wondering if even with push notifications turned off, email checking set to manuel, why my data use is still increasing little by little. Why is this? Every month I pass my limit of 100 mb data traffic in my account without even using it.
And is the wireless use of my iphone being counted as well in the data receiving info on my phone?
AndréNo, connections over WiFi are not counted.
Did you already reset your phone by holding the sleep and home button until the Apple logo comes up again? Do you have a lot of pages open when you quit Safari on your phone? Sometimes Safari reloads the pages you did not close. Try to close all pages and leave only a new page open to see if this makes a change. Are Location services switched off too? -
hi I want to change your e-secret questions because I forgot the answers I have tried sending reset questions on my mail and I have not received mail
New mail that I want is [email protected]
Alternative to the Old oneFrom King Penguin
If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) -
Question about send/receive data in as3
hello
i want to ask : how can i send data from flash to php using as3 and receive data from php using flash .
and another question : how can i upload files using as3 .
thank you .Look into URLLoader documentation for sending/receiving and FileReference for uploading:
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/URLLoader.html
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/net/FileReference.html -
I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
Thunderbird config to send/receive email
I tried configuring Thunderbird to send/receive email from my new verizon fios account. Simple Pop3 - how hard can it be? Well, using the settings provided, I am unable to send or receive email. I called and talked to tech support and they said they don't support Thunderbird, but I could talk to 'premium' support since they have no support boundaries. Well, I don't think I should have to pay to get my email setup to a POP3 client.
Here's my current config:
Mozilla Thunderbird 2.0.0.23
Account:
Server Type: POP Mail Server
Server Name: incoming.yahoo.verizon.net
Port 110
User Name: myname
Security Settings: Use Secure Connection: never
Use secure authentication - not checked
SMTP Server
Server Name: outgoing.yahoo.verizon.net
Port: 25
User secure connection: no
When trying to send an email I get:
Sending of message failed. The message could not be sent because connecting to SMTP server outgoing.yahoo.verizon.net failed. The server may be unavailable or is refusing SMTP connections. Please verify...
When I try to get mail I get:
Sending of password did not succeed. Mail server incoming.yahoo.verizon.net responded: Error logging in. Please visit http://mail.yahoo.com
Any help would be appreciated.winsomesmile wrote:
That was the one thing the tech told me on the phone - to use verizon.yahoo.net for incoming and outgoing instead of verizon.net
Other than that, I'm not sure where else to check that that is correct.
If the agent told you to use the Yahoo servers, they were probably right. If you want to verify, you can log into your account at www.verizon.net and it should say that you have a Verizon with Yahoo account.
As for the settings:
1. Make sure the username and password that you have are the correct ones. Logging in to verizon.net will verify this.
2. Check your incoming server settings. They should look something like the following image. (Of course, where the example just says "username" your username should be filled in.)
3. Check your outgoing server settings. They should look something like the following image. (Of course, where the example just says "username" your username should be filled in.)
4. Make sure that the password you are entering is correct. I suggest typing it out in a notepad then using copy and paste to verify that it is correct, since it will appear as asterisks in Thunderbird. Once you have successfully sent and received a test message, you might consider checking the box for remembering your password, although this is less secure than typing it in every time.
Hope this helps! If you have any other questions, just let us know.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having." -
I have BIS but can't surf, send/receive email, use apps
i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi. also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc. They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them. aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs. my carrier says i have active data plan/BIS. but under Services Status..it says Blackberry Internet Service: Connection: not connected...
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS. i have registered my HRTs several times... and resending my service books... same thing...
the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
my sister and i have the same BB... i removed my sim and inserted it to her BB and the BIS worked fine... i was able to surf and use apps.. but when i put my sim back on my phone, the problem still exists. i even used a different sim card that is also subscribed to BIS/data plan, and it still has the same problem... my guess is my carrier is right that my data plan is working ok and that my handheld itself has the problem...
i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... numerous battery pulls... same thing... i can receive the HRTs and service books, but after that can't do anything else like i used to... (send/receive emails, use apps like facebook, twitter, ym, etc., can't surf with internet browser - except when wifi is on everything else work fine even emails and apps)..
i would really appreciate your help guys.. thanks!Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
I have BIS but can't send/receive email, surf with internet browser
i have BB Curve 8520. My BIS was running smoothly (sending and receiving emails real time and surfing the net through BIS), until i noticed when i tried to reply to an email that came in, it won't send. i noticed that it's fluctuating. i was able to send the email after a few minutes... then a few minutes later, i received a replied email from my friend, and when i tried to send my reply, i wasn't able to. also, i can't surf using the browser with the "internet browser" as default. i tried using my wifi and then suddenly all my emails started coming in, all emails that were not able to go through hours ago. my big question was why do i need to turn on wifi just to receive emails. but since i had my BIS for 2 months now, i can send and receive emails and surf through BIS itself without turning on the wifi. also, i can't use any of my apps like facebook, twitter, yahoo messenger, etc. They used to work fine with BIS... but now, i have to turn on the wifi connection, so i could log in with them. aren't these supposed to be running through BIS only?
I have GPRS on top, not gprs.
so, i wiped out my BB and deleted all third party apps. when this was done, i received emails telling me "Your handheld has been registered with the wireless network" and even got "Activation Server" emails telling me that the emails that i have previously set up are now up and running. so i thought my BB is now ok.. i tried surfing, it was okay. after like about 5 minutes, it was down again. tried sending email but can't... i turned on the wifi and boom! the emails started coming in again.
i have the Host Routing Tables and my Service Books in my BB. I have GPRS (not gprs) on top which means i have active BIS. i have registered my HRTs several times... and resending my service books... same thing...
-My carrier has not reported any data outage.
- I'm in an area where I've had RIM data services (for months now). It has always been working well. I've never really had any problems with my BIS until 4 days ago when it just suddenly stopped sending/receiving emails, surfing through internet browser, using facebook, twitter, ym apps, etc..
-the big mystery is when i turn on the wifi, the emails suddenly go through and i can send emails. i can open apps that used to only run on BIS. this is ok i guess, but i could never do any of these if i'm not connected to wifi.
-i've read somewhere that it may be some application error or something, so I've wiped out my BB thrice now, deleted all third party apps, everything is clean i guess, but still I end up with the same problem.
-i updated my OS, same problem.. wiped it out... used BBSAK, reinstalled OS... same thing...
can you help me out with this? i have tried battery pull, wipe out and OS reinstallation lots of times but same problem happens...Hi tarifiq and welcome to the BlackBerry Support Community Forums!
Can you send me a private message with your PIN so I can check this out for you?
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
How does B2B in SOA SUite 11g identify sender/receiver of inbound document?
Hi All,
I am checking basic B2B features - custom document protocol. I have defined docuement definition, trading partner, agreement, channels as per guide. When I copy (manually) a sample xml payload (complaint to definition xsd and identification expression), it gives error as the sender could not be identified (receiver is taken as the host as I am putting the file over host's listening channel).
So question is - how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?
Thanks in advance.
regards, sibenduHi Sibendu,
First of all, let me direct you to the right forum, Oracle Integration B2B forum - Integration - B2B
Now coming to your question,
how does B2B identify sender, receiver and match the incoming message payload to identify the agreement?For each and every document, exchange and transport protocol there are certain fields (generally message headers) on the basis of which B2B identifies the sender and receiver. As far as identifying the incoming message payload is concerned, in each and every document definition we define some UNIQUE selection criteria to identify a document. For XML documents, it is the X-Path of some node(and/or it's value) and for non-xml documents, it is the start and end position of some element (and/or it's value) in the document.
You may get faster and better answer in Oracle B2B forum, for the questions related to Oracle B2B (10g/11g).
Regards,
Anuj -
Problem sending/ receiveing SMS on a particular port in an intercarrier n/w
I am using JSR 120 to send & receive SMS on a particular port. This works perfectly between 2 devices using the same carrier.
if I try sending & receive inter-carrier SMS, like from T-Mobile device to Cingular device (or vice-versa), my j2me app does not receive any SMS on the port it is listening to.
When the SMS with a port is sent from my app, I get the prompt for permission to send. On pressing OK, the SMS is sent. On the receiving side, the device on the another carrier network receives the SMS in the default inbox, & not by my app.
I am not sure if this is a inter-carrier SMSC issue or something to do with my app.
Pl help.Has anyone come across the above mentioned problem? Pl let me know if there is any solution.
Question simply put : When a j2me sms midlet sends an sms on a unique port to another j2me sms midlet listening on the same port, but served by a different carrier (cellular operator), why does the sms go to device inbox & not to my midlet?
Thank you -
email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work? I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe. This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot. But I know both were exactly the same. But after this incident only the Supervisor password worked.
-
Outlook 2013 Refuses Send/Receive
After my computer downloaded Windows updates automatically earlier today, when I click 'send/receive' Outlook 2013 (Microsoft Office 365) gives me a 'not implemented' error message.
I have disabled my anti-virus software. When I click 'Disable Scheduled Send/Receive' as suggested on some forums I get the error 'An OLE registration error occured. The program is not correctly installed. Run Setup again for the program.'
I am running Windows 8.
When I try to uninstall Outlook I get 'Sorry We Ran Into A Problem. Error Code: 30175-4'.
How can I get Outlook to send/receive messages? Any help would be much appreciated.Hi,
Have you tried recreating your send/receive settings file (srs-file)? Navigate to
C:\Users\%username%\AppData\Roaming\Microsoft\Outlook and then rename the
<mail profile>.srs file to <mail profile>.old. Restart Outlook to check if the issue persists. For more information about error 'not implemented', please refer:
http://www.msoutlook.info/question/825
For the 'An OLE registration error occured. The program is not correctly installed. Run Setup again for the program.' error, you can try to run the
Regsvr32 ole32.dll command to check if it helps. See:
http://www.slipstick.com/outlook/email/error-an-ole-registration-error-occurred/
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Update N80 Firmware Cant send/receive txt messages
Hi all, first of all im a newbie so please forgive me if im asking stupid questions.
Since purchasing my N80 i had a few software problems so i used nokia software updater yeterday, it seemed to install ok and restored a back up i had using nokia pc suite.
this seemed to fix the memory low close applications and try again message i received when viewing pics and vids in the gallery however i can no longer send/receive txt messages, They gow into outbox and constantly try to resend. I am now running V 4.0623.0.41 26-07-2006 RM-92 NOKIA N80 (58.01)
Any help would be much appreciated THANKS MIKECan't you use the settings wizzard. You can download it from this site.
Is that an N95 in your pocket or are you just pleased to see me?!?
Life's too important to take seriously.
Nokias I've owned 3210, 3310, 6100, 7650, 6600, 6680, 6630, N80, N95
I'm a 26 year old boy BTW -
Factory unlocked iPhone 5 having problems sending/receiving sms
Hello,
I recently bought a factory unlocked iPhone 5 from the apple store in the US and I am unable to send/receive any sms/texts using my mobile provider B&YOU located in France.
Can anyone help with ways to solve this issue?
Thanks,
SuligadalHello Sk8Dreams,
Thanks for your questions and quick feedback. Yes I turned on SMS & MMS in my settings and yes my plan includes SMS & MMS. I tried something I saw in the forum concerning enabling the "show subject field" and for some strange reason, I am able to send messages after trying this. Seems strange, I am going to disable this "show subject field" and see if it will work or not. SMS should work regardless of if this option is active shouldn't it?
Thanks -
What classes should I use to send/receive bytes inmediately?
What classes should I use to send/receive bytes inmediately? I mean, without using any buffers or whatever (I will implement this on my app), just the faster method.
Is InputStream/OutputStream the lowest level choice?
Thanks!Hi!
Thank you very much for your help, I appreciate it a lot.
While I test my server, I execute ping www.myclienthost.com -t (my client games are in other office, in the same building, but different ISP) and I don't see anything strange, so I guess network is working perfectly. However, if I use wireshark (sniffer) and I see that my system fails (server does not send acks so client disconnects) is because my acks messages are not sended for 6 o 7 seconds (it should send them every 2 or 3). It seems thread is blocked. and after 6 or 7 seconds one message with 2 or 3 acks together is sent. So, I see that the thread handler blocked for a few seconds and this is doing my server is failing. Why client handler thread on my server is blocked? One question: every 2 or 3 seconds I have a thread that uses sleep that iterates thru client handlers and takes OutputStream and send one ack message for every client handler. My question is, in client handler class I have a method called SendInfo(String whatever) which encrypts and sends through OutputStream, should I protectd this method from accesing from two threads??? as acks thread and client thread can access at the same time. Could this be the problem??
EDIT: In my previous post I forgot to say what I found out with wireshark. Here I explain it. Sorry.
By the way, how can I debug threads?? I would like to know if my client thread is blocked in that critical moment.
Thanks a lot for your ideas and sorry for my English.
Edited by: Ricardo_Ruiz_Lopez on Jan 22, 2009 7:38 AM
Maybe you are looking for
-
I get this error when trying to open "obj" files exported in various 3D programs. I looked up a few similar questions about this error message but the don't seem to relate to me since this installation of PS is new and I never had a previous version
-
About 2 weeks ago the tool bar at the top of the page when i log on vanished. Its the toolbar that has copy, edit, view, tools, etc. A week later the next line vanished that has the refresh key and a search line. Now I can't clear cookies, caches, hi
-
Hi All, I have designed an Adobe Form in the NWDS Adobe Designer. It fetches data from BAPI and on Click of the Submit Button Sends it back to BAPI. However I am really stuck up at two places. 1) I have two radio buttons and on select of 1 radio butt
-
hi friends, could any one of u clear about -- how to HIDE the content of basic list (ALV) after an event occured. in function module <b>REUSE_ALV_GRID_DIAPLAY</b> there is a parameter <b>is_hide</b> what is the use of this parameter. expecting reply
-
How difficult is it to learn BPM Suite, provided you are good in BPEL
Hi All I have good experience in Oracle SOA SUite 11g, particularly in implementing BPEL. I want to know how tough is it to learn Oracle BPM Suite 11g. I'm not going for any training, Want to learn it myself. Concepts wise, how different is BPM Suite