Send & Return with Fireface 800 not working with Logic 8

Hello all.
I'm having a bear of a time setting up an FX loop from Logic to a FireFace 800. I suspect the problem is in Totalmix, but I can't seem to configure that at all.
Trying to route Track #1, through the FF and into Helicon VoicePro, then back to Logic's Track #4.
Here's what I'm doing:
- In Logic, Track #1, in Mixer window, setting Send to Bus #2.
- Bus #2 is set to Outs 3-4.
- Fireface outs 3&4 go to the Helicon
- Helicon outs go to Fireface input 7&8
- In Logic, track #4 is set to Input 7&8, Out 1-2.
I'm NOT using the I/O plugin, just the normal I/O selectors.
I get no signal to the Helicon with the above setup. However, if I change the Fireface cabling so the outs are 1&2, it goes through the Helicon just fine (the only problem is I get an echo-loop as the signal is feeding through over and over again). So, the Helicon works, the problem is at the Fireface, and I suspect it's because I can't get Total mix to route. The Fireface manual is worthless for this, I've followed the one paragraph of advice and it doesn't work.
Does anyone know of another way to route the signal? Or any tutorial for Totalmix?
All I want to do is send, add FX, then return to a new track.

R u recording midi input into the track? (ez drummer takes midi info and feeds it into the plug-in (drum samples) for output. of course, you can route the output from ez drummer to an audio track to record the audio output. But working in midi allows you to edit your midi files, change drum sounds, etc.

Similar Messages

My upgraded version of mail with Windstream will not work with Mozilla Firefox. Why? Works find with the old Classic but not the new version

It switches to the Classic view but not the new view which I really like.... My laptop has Google Chrome and it has not problems with this new view of Windstream only with Mozilla Firefox 5, the other version never had any problems either...I had 3 and had no problems till I up graded....

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

XSLT with java extensions not working with jdk 1.6

Hi,
in as XSL transformation I'm using java functions in some cases. With jdk1.5 this works fine. But when switching to jdk1.6 it seems the java classes are not properly initialized.
See following simple XSL:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:java="http://xml.apache.org/xalan/java" exclude-result-prefixes="java">
     <xsl:output method="html" indent="yes" encoding="iso-8859-1"/>
     <xsl:template match="/">
     <xsl:variable name="counter" select="java:java.util.Vector.new()"/>
     <xsl:variable name="temp1" select="java:add($counter,'1')"/>
     <xsl:variable name="temp2" select="java:add($counter,'2')"/>
     <xsl:variable name="temp3" select="java:add($counter,'3')"/>
     <xsl:value-of select="java:size($counter)"/>
     <xsl:value-of select="java:toString($counter)"/>
     </xsl:template>
</xsl:stylesheet>
With jdk 1.5 it creates following output:
3
[1, 2, 3]
With jdk 1.6 I get:
0
So I can access the object in jdk 1.6 but adding doesn't work.
Anybody has an idea what could be wrong or how to fix this?

thanx this is the solution. With this construct
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:java="http://xml.apache.org/xalan/java" exclude-result-prefixes="java">
     <xsl:output method="html" indent="yes" encoding="iso-8859-1"/>
     <xsl:template match="/">
     <xsl:variable name="counter" select="java:java.util.Vector.new()"/>
     <xsl:variable name="temp1" select="java:add($counter,'1')"/>
     <xsl:variable name="temp2" select="java:add($counter,'2')"/>
     <xsl:variable name="temp3" select="java:add($counter,'3')"/>
     <xsl:variable name="temp4" select="$temp3"/>
     <xsl:value-of select="java:size($counter)"/>
     <xsl:value-of select="java:toString($counter)"/>
     </xsl:template>
</xsl:stylesheet>
at least the '3' is added to the vector.

NB520, Replaced display, only work with AC power, not work with battery

Hi
I just replaced a broken display on my 7 months old Toshiba NB520 and now it only works with AC power.
The battery icon shows 52% but not charging.
When I plug out the AC power, it turns off.
Help

Please help guys. I dont know what more to do...

OpenGL ES Textures with alpha layer not working with Colorpointers

Hey,
I'm trying to get a texture - that's loaded from a .png file - to fade out gradually. I can load it using the Apple's "Texture2d" class and present it with its own transparency. The problem is when I try to combine that transparency with a color pointer. I'll try to give an example code...
const GLubyte squareColors[] = {
128, 128, 128, 128,
128, 128, 128, 128,
0, 0, 0, 0,
0, 0,0, 0,
glColorPointer(4, GLUNSIGNEDBYTE, 0, squareColors);
glEnableClientState(GLCOLORARRAY);
glEnable(GLTEXTURE2D);
glEnableClientState(GLTEXTURE_COORDARRAY);
glEnableClientState(GLVERTEXARRAY);
glTexEnvi(GLTEXTUREENV, GLTEXTURE_ENVMODE, GL_REPLACE);
glEnable(GL_BLEND);
glBlendFunc(GLSRCALPHA, GLONE_MINUS_SRCALPHA);
for (Sprite *element in dynamicBodies) {
glLoadIdentity();
[element renderSprite];
Now, if the original .png happens to be completely opaque, it gets darker and transparent because it gets multi-sampled with the color matrix. But if it has any see-through parts in itself, it does not get affected by the the color.
I'm sure it has to be possible to change the alpha percentage of an alpha layered texture, but I can't seem to find another way.
Does anyone happen to know why this does not work, or how it could be accomplished some other way? I would be highly appreciative.

You set your texture environment mode to GL_REPLACE. The implementation of this feature is to replace the primary color (set via ColorPointer or Color3f) with the sampled texture value, so your color will have no effect.
Replace the texture env mode with GL_MODULATE, which will multiply the Texture Unit Input Color (==PrimaryColor for Texture Unit 1) with the sampled texture value.

Weblogic server 5.1.0 with sp8 does not work with LDAP (Netscape Directory Server 4.12)

I have weblogic server 5.1.0 with the sp8 running on Windows NT server 4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException: java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect to ldapse
without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError: weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate as
at weblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
.java, Compiled Code)
at weblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
at weblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
And here is the my ldaprealm.properties file
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic 5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

BEA support just gave me the solution.
They told me to uncomment out the line
server.alias=netscape
in the ldaprealm.properties file
And I am able to start weblogic with my NIS
Thanks
"Enrique" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Have you try to remove the "system" user on the LDAP server?
Regards.
"Honghai Zhang" <[email protected]> wrote:
I have weblogic server 5.1.0 with the sp8 running on Windows NT server
4.0.
The weblogic server is configured to use LDAP realm (Netscape directory
server 4.12).
When I try to run weblogic server and I am getting the following errors:***************************************************************************
The WebLogic Server did not start up properly.
Exception raised: java.lang.reflect.InvocationTargetException
java.lang.reflect.InvocationTargetException:
java.lang.ExceptionInInitialize
or: weblogic.security.ldaprealm.LDAPRealmException: cannot connect toldapse
without a principal to authenticate as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)
java.lang.ExceptionInInitializerError:weblogic.security.ldaprealm.LDAPRealm
ption: cannot connect to ldapserver without a principal to authenticate
as
atweblogic.security.ldaprealm.LDAPDelegate.setupProperties(LDAPDele
..java, Compiled Code)
atweblogic.security.ldaprealm.LDAPDelegate.<clinit>(LDAPDelegate.ja
83)
atweblogic.security.ldaprealm.LDAPRealm.<init>(LDAPRealm.java:34)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:241)
at weblogic.security.acl.Realm.getRealm(Realm.java:78)
at weblogic.security.acl.Realm.getRealm(Realm.java:56)
at weblogic.t3.srvr.T3Srvr.initializeSecurity(T3Srvr.java:1756)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
at java.lang.reflect.Method.invoke(Native Method)
at weblogic.Server.startServerDynamically(Server.java:99)
at weblogic.Server.main(Server.java:65)
at weblogic.Server.main(Server.java:55)***************************************************************************
And here is the my ldaprealm.properties file////////////////////////////////////////////////////////////////////////////
netscape.server.host=localhost
netscape.server.port=389
netscape.server.ssl=false
netscape.server.principal=uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot
netscape.server.credential=password
netscape.user.dn=ou=People, o=towers.com
netscape.user.filter=(&(uid=%u)(objectclass=person))
netscape.group.dn=ou=Groups, o=towers.com
netscape.group.filter=(&(cn=%g)(objectclass=groupofuniquenames))
netscape.membership.filter=(&(uniquemember=%M)(objectclass=groupofuniquename
s))////////////////////////////////////////////////////////////////////////////
By looking at the error message, it seems like the "server.principal" and
"server.credential" info is not correct.
But I was able to use the same Netscape Directory server with Welogic5.1.0
with sp4, although the ldaprealm.properties file has somewhat different
format.
Did anyone have similar problems with sp8?
Thanks in advance for any suggestions.

Powershell : Send-MailMessage -Body paramenters is not working with commands like (Get-ExchangeServer) etc

I am trying to send email from Powershell .
When i run this:
Send-MailMessage -From "[email protected]" -To "[email protected]" -Subject "Test email" -Body "This is Test Email" -SmtpServer "mail01.xxx.xx"
then i successfully receive email .
But when i try to use other commands in -Body parameter then it gives error:
For example:
Send-MailMessage -From "[email protected]" -To "[email protected]" -Subject "Test email"
-Body (Get-ExchangeServer) -SmtpServer "mail01.xxx.xx"
Send-MailMessage : Cannot convert 'System.Object[]' to the type 'System.String'
required by parameter 'Body'. Specified method is not supported.
At line:1 char:96At line:1 char:116
+ Send-MailMessage -From "[email protected]" -To "[email protected]" -Subject "Test email" -Body (Get-ExchangeServer <<<< ) -SmtpServer "mail01.xxx.xx"
+ CategoryInfo : ObjectNotFound: (Get-ExchangeServer:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
My requirement is to send email from powershell and send exchange related data in email.

OK I got it .. The solution is to add Out-String
Send-MailMessage -From "[email protected]" -To "[email protected]" -Subject "Test email"
-Body (Get-ExchangeServer | Out-String) -SmtpServer "mail01.xxx.xx"

FlexUnit is working with FlashBuilder and not working with Build file

Hi
I have few flexunit test cases . When I am running those testcases from Flashbuilder FlexUnit plugin I am able to run all the testcases and when I run Build file to run those testcases , build file is launching my testrunner swf file and it is throwing follwoing runtime error in flash player
VerifyError: Error #1014: Class flash.events::NativeWindowBoundsEvent could not be found.
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/deferredNextFrame()
at mx.managers::SystemManager/preloader_preloaderDocFrameReadyHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
here is the Build Console log
[taskdef] Could not load definitions from resource flexTasks.tasks. It could not be found.
test:
[mxmlc] C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf (1626331 bytes)
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328]
[flexunit] haltonfailure: [false]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] command: [C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328\runtimes\player\10.2\win\FlashPlayerDebugger.exe]
[flexunit] port: [1024]
[flexunit] swf: [C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [C:\Users\user\Documents\workspace\project\report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit] Entry [C:\Users\user\Documents\workspace\project\bin-debug] already available in local trust file at [C:\Users\user\AppData\Roaming\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexUnit.cfg].
[flexunit] Executing 'C:\Program Files\Adobe\Adobe Flash Builder for Force.com\sdks\4.5.1.21328\runtimes\player\10.2\win\FlashPlayerDebugger.exe' with arguments:
[flexunit] 'C:\Users\user\Documents\workspace\project\bin-debug\projectTestRunner.swf'
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
BUILD FAILED
C:\Users\user\Documents\workspace\project\build\build.xml:33: The following error occurred while executing this line:
C:\Users\user\Documents\workspace\project\build\build.xml:175: java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
Many thanks for In advance for your help ..

We had a similar problem in my project. Took a lot of research and trial and error, but we finally narrowed it down to the resource.properties file. Turns out that if the file gets too big it causes this problem. Extending the timeout doesn't help. You have to break your resource.properties into more granular files to reduce the file size. This seems to fix the problem. We have had it happen several times since then and we know how to fix it, so we get it fixed pretty quickly.
Not sure if this will fix your problem, but it fixed ours.

Can someone help with my Mail not working with my Microsoft Exchange server?

I am trying to set up my Mail account. I am using the Microsoft Exchange server. I've been using Entourage, but wanted to switch to using the Mac's Mail. I used the same settings I had with Entourage, but with Mac Mail I'm getting this error: MFEWSErrorDomain error 56. From some of the other posts I saw, it seems as though no one has any answers, but I figured I'd ask anyway.

There is no single cause of this problem and hence no single solution. There are several suggestions in this thread, if you haven't come across it, one of which might help:
https://discussions.apple.com/thread/3953623?start=0&tstart=0
Regards.

Js working with FF but not working with IE

Dear All,
I have created a text field P5_NO1 and in the
Post Element Text
<span style="color:#0000ff;font: normal 1.2em "Lucida Sans Unicode",sans- serif;font-size:12px;"> <select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option> ml</option>
<option> kg </option>
</select> Units
</span>
the js TankUnit() works fine in FF not in IE
I have an sample in apex.oracle.com
http://apex.oracle.com/pls/otn/f?p=4000:4150:4089089633206316::NO:::
can anyone help me to solve the problem?
bye
Srikavi

Hi Peter and John,
FF is so... tolerant to accept the value of the option as the same as it is displayed in the select list.
where IE is so... prudence, that we have to explictly tell it
ie Post Element Text in IE should be like this
<select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option value="ml"> ml</option>
<option value="kg"> kg </option>
</select> Units
bye
Srikavi

Free apps included with iPad Air not working with VPP

I can't disperse the free apps that come with the iPad Air using a VPP account. Apps like Pages are "free" with the iPad air, but cost $10 using VPP. I see it as a problem becuase the company purchased the device. The employee can download it as free but then they get ownership. Is there a solution to this?

How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
 Cheers, Tom

Scaling with key commands not working with objects or text frames

Suddenly, I can no longer hold Shift+Option+Command to proportionally scale anything in InDesign CC 2014. Any suggestions?

Which file do I want to trash or rename?

10g JSpell PJC does not work with latest JSpell version

Looks like latest (10g) forms demo - Spell check with JSpell does not work with the latest version of the JSpell software (does not look like this demo been changed from the previous version).
Does anybody has a success running this or have any suggestions how to integrate it together?
Thanks for any input.

We're in contact with JSpell on this issue and will revise the integration code as soon as we recieve the relevant updates from them.

Rules not working with iCloud anywhere

Hi, Rules are not working with my icloud account, if I set up a rule at icloud.com the mail arrives in my inbox and ignores the rule, same thing on my Mac in the mail app, all my rules that worked great with mobileme are not working with icloud, the mail is just piling up in the inbox. Other accounts are fine but icloud is ignoring all the rules . . . . . anyone else experiencing this please?

come on Apple. are you listening?
"It just works"? Really?
the worst PR is a product that doesn't do what it says it will.

DTMF not working with UCCX

Hi
We have noticed that DTMF is not working with UCCX,
Call flow ->
PSTN (SIP)-> CUBE - (SIP)-> CUCM - > UCCX
UCCX DTMF is working with IP Phones which are registered with CUCM, But not working with PSTN incoming calls, also we have Unity Connection, for this DTMF is working with PSTN incoming calls,
Please help to troubleshoot this issue,
Rgds
$

What this boils down to is that the CTI Ports do not support RFC2833, only out of band over the CTI QBE protocol. This means that CUCM must "see" the DTMF packets. If CUBE offers KPML in the call SDP, CUCM will automatically request this and translate from the SIP packet into a CTI event. If CUBE is only offering RFC2833, CUCM would need to invoke an MTP on the call to intercept the RTP packets containing the DTMF event.
If this isn't working the most likely reason is that there is no MTP for CUCM to invoke, or the MTP doesn't support RFC2833 DTMF interop. The best way out of this problem is to adjust the CUCM-facing VOIP dial-peer to include both capabilities: 'dtmf-relay rtp-nte sip-kpml' CUBE, assuming it's doing media flow-through, will do the heavy lifting for CUCM. If you set the DTMF Method on the CUCM-side SIP trunk, CUCM will essentially invoke an MTP for *every* call, in most cases needlessly; that's a great way to introduce problems and break things such as faxing.
Please remember to rate helpful responses and identify helpful or correct answers.

Send & Return with Fireface 800 not working with Logic 8

Similar Messages

Maybe you are looking for