Send RFQ and PO from SAP R/3 to SRM

Hi all,
I am new to SRM and need send the RFQ and PO created in SAP R/3 release 4.7 for SRM Server 5.0. I am using a distribution model (ALE) between the systems with the message types REQOTE and ORDERS associated to IDOC types ORDERS02 and ORDERS05 respectively. This scenario not have PI/XI implemented.
My problem is what this IDOC types aren't disponible on SRM and do not know how to receive this IDOCs.
Is there any way standard in SRM to receive these IDOCs? How can resolved this question?
Thanks,
Luciano Lessa

Hi,
Thank you for replying Masa,
My customer doesn't want the sourcing done in SRM. The SRM will be used by the supplier to update the prices in RFQs and will then be sent to SAP.
As PO, not know what is possible create a confirmation on SRM without a PO. If the PO doesn't exist in the SRM, know how the relationship between PO and Confirmation? You have some material about that question?
Thanks,
Luciano

Similar Messages

Unable to send mails to outlook from sap system through workflow

Hi ,
Iam unable to send mails to outlook from sap system through work flow .Actually we r able to send mails from sap inbox to outlook successfully.But when trying with workflow we r not able to send.Please guide me that is there any configurations required from BASIS side for work flow.Actually we configured everything like default domain .
Please find the errors belows that traced from sost t code
02/13/2012     17:50:12     0380 MIME_MESSAGE_GENERATE     G     Error when generating MIME flow
02/13/2012     17:50:12     0382 MIME_MESSAGE_GENERATE     G     Required 'From' header is initial
02/13/2012     17:50:12     0167 SO_OBJECT_MIME_GET     G     Error during MIME Generation
02/13/2012     17:50:12     0777 UPDATE_SOSC     G     Cannot process message in SAP System
Regards
RAGHAVENADAR

Hello,
Actually i checked the mail ID for WF-BATCH using su01 .But i didnt find any mail ID for WF-BATCH then i added the email address of the user.Then we tried sending mail it was successfull.
But later i removed the email address what i entered in WF-BATCH user .Even after removing the email address also iam able to send the mails through workflow.
So iam confused whether it needs an mail address or not.But now we are able to send a mail to outlook through work flow but not able to send mails to GMAILor yahoo.For that we need to do any settings.
ABAPer is sending mails through work flow.
Regards
RAGHAVENDAR M

BASIS Configuration needed to send an external mail from SAP Program

Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
Regards,
Subhasish

Hi Subhasish,
Please go thru the below link.
Re: SCOT Configuration--for external mail
Regards,
Lakshman.

Sending mail to OUTLOOK from SAP when error encountered in MM creation

Hi ,
I am able to send a message to SAP inbox which i can view from SBWP. But as well i need to send mail to the OUTLOOK .How can i send this OUTLOOK .
I have configured the mail id in SCOT.
Even i configured in SCOT with BASIS team i m not able to send mail to outlook.I even checked in SOST their is no entry in that .
Is their a need for writing separate logic for sending mail to OUTLOOK as well?
Regards,
Ranjith ,
+91-8431858286.

HI Modak,
Please help me in getting out of this error encountered during a sample workflow thing.
Here is the requirement I need to send a OUTLOOK mail from SAP.If the user accepts the workflow task then mail need to send a recipient ,stating that he accepthed the request.
Below I designed that task.
In send Mail step I added the recipent thing as stated below.But I was unable to send mail to OUTLOOK .In this I am not even getting notification in my SBWP in SAP INBOX.

How to get Plant address from SAP R/3 to SRM

Hi Gurus,
We need to retrieve the plant address from SAP R/3 to SRM and display it in the output list of the report (SRM).
Suggest any standard FM or should we need to create a Custom Remote enabled FM and put the select query to get the address.
Regards
Paul

Hi Paul,
Try using the RFC_READ_TABLE function module...
Pass the table name as t001w which contains the plant details.
Hope this helps.
Thanks,
Pradeep

How to send vendor IDOC data from SAP R/3 to XI.

Hi experts,
I have developed the IDOC to FILE scenario for Vendor Master Upload. I want to place flat file in local folder with in XI or Outside of XI. (Using NFS or FTP protocol in FILE adapter). My First quesstion is How to setup Folder with in XI ro Out side XI?
And also I want to push the IDOC from SAP r/3 to test the scenario. Both XI and R/3 systems are configured to exchange data.
How to Push Vendor IDOC from SAP R/3 to XI? (we can send XML directly to XI; but the R/3 kernal should be moe than 6.20).
Thanks in Advance.....

Hi,
>>My First quesstion is How to setup Folder with in XI ro Out side XI?
Its a normal way to creation of folders in Os level . u can create the folder in XI Server or on the FTP Server.
ALE Settings
Steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
IDoc-XI-File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Posting the IDOC from R/3 to XI
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
REgards
Seshagiri

How do you send by secure ftp from SAP R/3 4.6C on iseries

We have been using the SAP Standard program, RSFTP002, to ftp files to remote servers for many years. We have now had a requirement to send via secure ftp. We are using R/3 4.6C. Unfortunatley this is not a straight forward change and it seems we may need to install some client software to enable this.
I have searched for any SAP notes and in several user groups but have not been too sucessful.
Has anyone ever set this up before? What client software did you use?
Any pointers / advice on this would be much appreciated.
Many thanks,
Steven

Further to my initial post, I have now discovered that there are additional options on the ftp command on iseries, so I am hoping if I can perform this manaully, then a CL called from SAP would allow me to resolve this challenge.
I am trying to use the command below but this will use the port 990.
FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(SECURE) SECCNN(*SSL)
The vendor is requesting that we use port 443 for secure ftp with SSL and even specifying this in the command as below still does not work. It seems to me there may be an issue at the receiving end. Port 443 is normally used for https so not sure whether specifying this port could cause issues. The resultant error is below.
FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(443) SECCNN(SSL)
Connecting to remote host 62.39.53.181 using port 443.
No response from remote host; all connections closed.
Any other comments would be welcomed.
Many thanks,
Steven

To send IDOC to vendor from SAP for purchasing order

Hi Gurus,
I want to setpu an EDI for send the outbound & inbound idocs to vendor for purchasing order from SAP and below are the message type I am using:
Outbound message type :
ORDERS
Inbound message type :
ORDRSP
INVOIC
I know how to set up the link, making the partner profiles attaching the process code, assigning the ports but I want to know the below customize set up:
1) Which transaction I need to used for customize this sceranio
2) Could you provide me any documentation which specifies the steps for configuration
And other details which I am suppose to know.
Please reply me as soon as possible as I am urgently in need of this.
Regards,
Sagar

Hi Sagar
For the Confirmation you need to do the customizing for confirmation control, like what would you like to do after the confirmation. Confirmation is an inbound process.
For Invoice you need to complete the customizing under LIV in SPRO- for Invoices received via EDI.
Please go throught the help link for further details.
http://help.sap.com/saphelp_47x200/helpdata/en/a8/b99f58452b11d189430000e829fbbd/frameset.htm
Reward points if useful
Thanks & regards
Kishore

How to send a XML file from SAP to WEB SERVICE

Hi folks,
i m creating a XML file with purchase order data, while saving the purchase order.now i need to send this XML file to some WEB SERVICE i.e to some perticular address in WEB.
can anyone give the step by step procedure to do this web service configuration? it's really urgent.
points must be awarded.
Thanks & Regards
pabitra

Hi all,
i need to send some purchase order data from SAP to WEB SERVICE. while saving the purchase order, i want to send some data from SAP to WEB SERVICE ( a perticular address in WEB).
i want to see those datas in xml format in WEB.
Now i am using SAP 4.7 version. Is this web service configuration is possible or not?
In SE37, i can not see the CREATE WEB SERVICE option in utilitities--> More utilities menu.is it possible in 4.7???
can anyone give any suggestion ? it's very urgent.
Thnaks
pabitra

Need to send data as files from SAP to other systems.

I need some code which will be useful to me. I fetched data from sap to internal tables. Now, the data needs to be sent to other systems (Informatica or so..) as files. Pl. anyone send me a sample code which i can use in my program.
I will try to reward points to people who will be able to help me.

Hi, Pl. find the required code which might be useful for ur question.
Get the data for Userid(l_user) & password(l_pwd) & host string(l_host).
DATA: l_slen     TYPE i,
      l_error,
      l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
           c_key TYPE i              VALUE 26101957.
connect to ftp server
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = l_user
      password        = l_pwd
      host            = l_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Get the path to which the data file needs to be moved (w_outfile).
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
Pl. award points if it has solved ur problem.

How to set Default text when sending a blank mail from SAP

Hi all,
How to add Signature with company logo in the mail body.
User should see at least one default text (eg; Hi) in the mail body if the sender did not type any text in the mail body when sending a mail from SAP.
Is it possible to set like this on Subject also.
Kindly share your ideas.
Regards,
Mathan A

Hi Mathan,
Please check sap note
SAP Note No. 1304146 Email Signatures feature note
1163250 - How to Create an Email Signature on several rows
I hope it will solve your issue.PLease mark thread as answerd.
Best Regards,
Atul

Routing and BOM from SAP ME to SAP ECC. Is it possible?

Hi,
Is it possible to send the routings from SAP ME to SAP ECC the way we send from SAP ECC to SAP ME.
Kind Regards
Suhas

Hello,
No it's not possible. Only ERP->ME direction is available as ERP is the source of masterdata usually.
regards,
Konstantin

Send Smartform and Attachments from "Services for Object" in one Mail

Dear all,
We create a sales activity with transaction VC01n. We create a Smartform formluar and send the sales activity via E-Mail to the customer, this is working. Additionally we have some attachments in "Services for object".
How is it possible to send the formular and the attachments in one mail to the customer?
Thank you
Michael

Hi,
Unfortunaltly there is no standard solution to send forms and attachement in a mail.
you have to develop it .
If you need more help tell me .
regards

Vendor replication from SAP 4.6C to SRM 4.0

Hello all,
I hope you can help me with the following issue.
I'm having an issue with replicating vendors with Russian cyrillic characters from SAP R/3 4.6C into SRM 4.0
The vendor cyrillic characters are scrumbled when I view the vendor in SRM via transaction BUP3
I have done some analyses and I have found the following.
When I login with language RU (Russian) in SAP R/3 and create the vendor in cyrillic then the cyrillic characters are correctly replicated to SRM 4.0 when I run transaction BBPGETVD
The issue is that when the vendor is set up in cyrillic in R/3 using logon language EN (English) then the cyrillic characters don't get correctly replicated into SRM.
I have tried to login in R/3 with language RU and then to reenter the vendor name in cyrillic and then to replicate the vendor via BBPUPDVD. This did not work as the characters still show scrumbled in SRM.
I think the issue is that even the vendors were initially created in cyrillic in R/3 but because the logon language was EN the English code page got updated. I have tried to update the vendor in cyrillic by login with language RU in SAP but I still get the vendors not correctly in SRM. I think this is because the characters are stuck in english code page.
Has anyone experienced this before and how was this resolved?
Kind regards

Anyway I think you have to create your transport request in 4.6.
Go through AL11 and you can see directories of SAP SYSTEM
ABAP transport files are in trans/cofiles and trans/data. Cofiles and data file must be copied in the same directories on ECC 6.
Go in the stms on ECC 6. In the stms, Throughout the list, you should find your request. You must go into Requests->Import and it's finished.
Pay attention that what are you transporting is free of incompatibility with ecc 6 (call standard function non present in ecc 6, standard tables, or something like that,etc..)
Hope to help

How to send information to Outlook from SAP and take back

Dear All,
We have a requirement. We want to send a report along with APPROVE and REJECT button to Outlook. When user clicks on say APPROVE, then it is approved and indication sent back to SAP which updates a custom table. Please can you suggest how to handle this?
Best wishes,
Atanu

Hi,
I am myself not aware of the SCOT configuration,
Please refer to the following threads for SCOT configuration
Re: SCOT configuration Issue
Re: SCOT Configuration--for external mail
Hope it helps
Regards,
Manish

Send RFQ and PO from SAP R/3 to SRM

Similar Messages

Maybe you are looking for