Send RFQ by email

Hello,
I am required to facilitate the sending of RFQ directly from SAP system to the respective vendors directly through e-mail.
The SMTP service in SAP has been configured.
Any help is appreciated.
Regards,
Subodh

Hello Subodh,
Pleaese refer the first thread of this forum regaring "PO via email". The process will be the same instead of PO you need to configure output type for RFQ.
Hope this helps.
Regards
Arif Mansuri

Similar Messages

SAP MM- Trying to send RFQ's to the vendors via email.

Hi Experts,
User is trying to send RFQs using Email address... But user is not able to do so....
Please guide how to start with...
Thanks,
Forum shah

Hi,
First of all U need to maintain an e-mail address in the vendor master data, then
define communication strategy (if not existing): SPRO > SAP Netweaver > Application Server > base setting > message control > communication strategy --> define one and assign communication method INT
Once done, define output message on RFQ with (particular values only specified):
Transmission method: 5
Partner function: VN
Communication strategy: as defined above
At the end go in SCOT transaction and make sure tahta node INT is active with proper info. Double click on SMTP and insert:
maximum time (30 minutes?)
node in use marked
MAIL host: ask syst admin
MAIL port: ask syst admin
Set internet: * --> to send e-mails to all domains (here U can filter)
From SCOT u should also create a job for sending e-mail periodically; normally the output message creates record in SOST transaction (cockpit about e-mails management) that can be processed manually or autho by job periodically,
SCOT setting can be found in SAP note 841883 and related.
I hope it helps,
Cheers,
Mik

Send RFQ to User email

Hi,
The client requirement is that they want to send RFQ (as PDF) to the user's e-mail (one who creates the RFQ). FYI, this is a new developed program because they are using Smart Form. They want to configure new print/send more (user e-mail) so that user can select this (similar to send external). Any idea how to do this?
Thanks,

Hi,
if you want to send a purchasing document r by e-mail and want to attach the document as a
file type (for example, PDF):
The file type is maintained in the corresponding node in SAPConnect
(Transaction SCOT). If you have any further questions, contact your
Basis administration.
Attaching purchasing documents to e-mails is only possible for external
(Internet) mails. This is not possible with SAPOffice mails.
Please read the notes 1100846 and 191470.
Regards,
Edit

Sending RFQ by e-mail

Hi All,
I'm trying to send a RFQ by mail, at this time I've already customized all the settings displayed on sap note 191470 including transaction SCOT and also I've assigned the forms and messages to this document, but I still can´t get our RFQ by email to ours vendors.
anyone of you have any clue to solve this?
thanks in advance.
Daniel.

Hi Janani,
my problem is that even I've customized all the settings at this time i couldn't find any e-mail sent from our system by using SAPConnect, to test if our system is working fine we tried to send e-mails from sap using other way and we didn't have any problem (this other ways reffers to mails sent by a function).
I thought that the problem is due to transaction ME41 doesn't accepts this kind of messages....would be possible? at this time I didn't tried to to this with purchase orders.

RFQ via email

Dear All,
Can anyone give me the full configration details as well as the user transaction codes needed to send RFQ to vendor via email?
Regards,
Indranil

Hi,
Need to follow same sameinstructions for RFQ like PO( Note 191470 )
For more check the link:
RFQ send by mail through SAP server
Regards,
Biju K

Can no longer send or receive email from any account after Security Update

Hello,
I have a problem with my email in Mail. I let software update install the latest security update (007) a few days ago. I have not been able to send or receive my email since the update. I have several accounts and use Mail as my client for all. This includes my mac.com account, 3 att.net accounts and my website email. All give me the same error which is an SSL thing and has something to do with the certificates. I am able to receive email if I turn SSL off on the ATT accounts but not the mac.com (and if I try to collect my email with SSL off I get an angry message from ATT warning me I am not allowed to do so) and I cannot send any at all from any account.
The error message reads "unable to connect- there may be a problem with the mail server or network.... The server error encountered was: Mail was unable to verify the identity of this server, which has a certificated issued to "mail.mac.com". The error was: An SSL error occured while trying to read data from the server. Verify this server supports SSL and that your account settings are correct". It then states that the certificate could not be verified.
The certificate date on the mac.com account reads May, 29th , 2010.
I also have an iMac and a MacBook Pro which are also running Tiger. I have not and will not run the security update on these machines until I find out why it has messed up my email on the G5. I can still send and receive email with the exact same account settings on the MacBook so I know it is not the settings but something to do with the Security Update.
Has anyone else had trouble with this update? Any advice?

Hello and Welcome to Apple Discussions ...
I don't know if this is a corrupted preference file or not, but it sure can't hurt to try this.
If Mail is open, Quit Mail.
/Users/YourName/Library/Preferences/com.apple.mail.plist
Drag that .plist file to the Desktop. Launch Mail and see if you can send or receive e-mail. If you can, that .plist file is corrupted. Drag it to the trash, empty the trash and reboot. Your Mac will create a new preference file for you the next time you launch Mail.
Also... run Disk Utility and Repair Disk Permissions. Disk Utility is in your Applications/Utilities folder. Launch DU, select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, click Repair Disk Permissions. Quit DU when it's finished and reboot.
Carolyn

I cannot send email - error message as follows : 'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk.' I can send email from other apple devices, and the email settings are identical. Any ideas?

For some reason I cannot send email - all was working fine, but now I get the following error message when I try to send email:
'The sender address (my email address) was rejected by the server smtp.tiscali.co.uk'
I can receive incoming mail ok and I can send email from other Apple devices. The problem seems confined to my Mac Book Pro.
Ant ideas?

Hello there, Pablo639.
The following Knowledge Base article offers up some great steps for troubleshooting mail issues on your Mac:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My computer has been infected with a Trojan Horse. It has completely taken over my Mac email account and was sending out malicious email to everyone in my address book. At the same time it infected my iPhone---I am no longer able to receive or send emai

My computer has been infected by a Trojan Horse. It has taken over my Mac email account and began sending out malicious emails to everyone in my address book. I cleared out my MAC address book and began using my AOL email account. It took a few days and then my AOL email account was infected and has now been send out malicious email to all my contacts for over a month. It has also infected my iPhone--I am no longer able to send or receive emails on my iPhone. Also, once the Trojan Horse began using my AOL email it completely blocked me from using my MAC account by sending never ending popups asking for my email password to access my MAC email account, but it never accepts my pass word. The TH has also slowed down everything on my computer. It's like I am working on an old PC with dial up connection instead of the high speed digital connection that I have. The little color wheel spins constantly as I wait for sometimes over a minute for a page to pull up. If it pulls up at all. I have tried to use the 2 disks that came with my computer to completely remove everything on my computer and then reinstall all the programs, but I am not allowed to sweep my computer clean. I thought maybe my disks that came with my computer were defective so I called Apple and they sent me 2 new disks. I am not able able to clear my computer with the 2 new disks either. I have done this before successfully so it's not something new to me. I do remember when I believe my computer became infected: I had googled an unusual sewing term, and I was opening what appeared to be legitimate sites, when all of a sudden a pop up appeared that said that my computer had been infected. I immediately shut my computer off, but it was too late. I downloaded a virus program for Mac, and it has never found a virus or problem at all. I think it is part of this Trojan Horse, but I am unable to delete it from my computer. It refuses to uninstall. The Mac Trojan Horse is real and it is terrible. If anyone has any suggestions for me I would be very appreciative,
Beth
vu

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

I cannot send or forward email in Outlook from my iPad

I cannot send or forward email from Outlook on my iPad

Try deleting the mail account and setting it back up again.

My iPhone 5c won't send iMessages, snapchats, email from the Mail app, and it won't load YouTube. Other internet apps like Pandora and Instagram work fine though. Any suggestions on how I can fix this?

A couple days ago I first noticed the problem when snapchats would appear on my lock screen but when I opened the app I kept getting the error message that the app was not able to refresh my story. Then the next day I was no longer able to send iMessages, they wouldn't go through and would only reach the second party when I sent them as text messages. Also, YouTube won't load and Mail won't send or receive email. I've already tried restarting my phone but there was no change. At first I thought my network connection was the problem but Instagram, Safari, Vine and Pandora all work perfectly. Any suggestions?

Try this procedure to be sure of a proper restart.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)
I would also try: Settings > General > Reset > Reset Network Settings

HOW TO SEND A HEBREW EMAIL WITH ATTACHMENT USING DEMO_MAIL

Hello All,
This is Not a question , just attaching something I've implemented and might be interesting for few of us,
This package I'm attaching allows to send Hebrew Language email + attaching files to it.
This package is based on demo_mail package (combined here but you can search at google for more example information if needed).
My Package is supplied as is , for any specific information regarding it , please contact me directly at : [email protected] or POST here.
* Please also note , that this package allow file to be attach via URL (meaning you will have to define a link to this file, if you would like to implement a link to a local file , e.g : c:\temp\myfile , you will have to customize the package your self with database directories option etc ...)
First I will attach an example of how to use it :
==================================
begin
demo_mail_heb.send_html_mail_attach(p_sender => '[email protected]',
p_recipients => '[email protected]',
p_subject => 'שלום וברכה עולם',
p_data => '<hr>בוקר טוב<hr>',
p_file_name => 'but_choose_file.gif',
p_file_mime_type => 'application/pdf',
p_file_URL => 'http://10.172.246.160:7777/i/but_choose_file.gif');
end;
Second Here is the Package (please note you will have to modify few settings in order to enable it , such as mail server address ..etc)
======================================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := 'mail.oracle.com';
smtp_port PLS_INTEGER := 25;
smtp_domain VARCHAR2(256) := 'oracle.com';
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default 'áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 priority IN PLS_INTEGER DEFAULT NULL)
 RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
 message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
 data IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
 data IN RAW,
 mime_type IN VARCHAR2 DEFAULT 'application/octet',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
 sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default 'áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default demo_mail_heb.MULTIPART_MIME_TYPE,
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => p_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
Utl_Http.set_proxy('www-proxy.us.oracle.com', 'oracle.com');
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
 chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
 c := substr(str, i, 1);
 IF (inside_quote) THEN
 IF (c = '"') THEN
 inside_quote := false;
 ELSIF (c = '\') THEN
 i := i + 1; -- Skip the quote character
 END IF;
 GOTO next_char;
 END IF;
 IF (c = '"') THEN
 inside_quote := true;
 GOTO next_char;
 END IF;
 IF (instr(chrs, c) >= 1) THEN
 RETURN i;
 END IF;
 <<next_char>>
 i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
 addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
 name IN VARCHAR2,
 value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
 last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 priority IN PLS_INTEGER DEFAULT NULL)
 RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
 message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
 data IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
 data IN RAW,
 mime_type IN VARCHAR2 DEFAULT 'application/octet',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
 utl_smtp.write_raw_data(conn,
 utl_encode.base64_encode(utl_raw.substr(data, i,
 MAX_BASE64_LINE_WIDTH)));
ELSE
 utl_smtp.write_raw_data(conn,
 utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
 write_mime_header(conn, 'Content-Disposition',
 'inline; filename="'||filename||'"');
ELSE
 write_mime_header(conn, 'Content-Disposition',
 'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
 sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 -- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
 priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Subject" MIME header
write_mime_header(conn, 'Subject', subject);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
 utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;

Hello All,
Small modification - use this package and not the above
HERE IS A WORKING CODE FOR SENDING HEBREW MESSAGES (INCLUDING SUBJECT IN UTF-8 APPEAR IN ALL EMAIL CLIENTS I HAVE CHECKED) + ATTACHMENTS
Code attached below is supplied as is with no support. anyhow if help is needed , please contact me via [email protected]
============================================================================
CREATE OR REPLACE PACKAGE demo_mail_heb IS
----------------------- Customizable Section -----------------------
-- Customize the SMTP host, port and your domain name below.
smtp_host VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_HOST');
smtp_port PLS_INTEGER := pst_ajax.getParameter('EMAIL_SMTP_PORT');
smtp_domain VARCHAR2(256) := pst_ajax.getParameter('EMAIL_SMTP_DOMAIN');
-- Customize the signature that will appear in the email's MIME header.
-- Useful for versioning.
MAILER_ID CONSTANT VARCHAR2(256) := 'Mailer by Oracle UTL_SMTP';
--------------------- End Customizable Section ---------------------
-- A unique string that demarcates boundaries of parts in a multi-part email
-- The string should not appear inside the body of any part of the email.
-- Customize this if needed or generate this randomly dynamically.
BOUNDARY CONSTANT VARCHAR2(256) := '-----7D81B75CCC90D2974F7A1CBD';
FIRST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || utl_tcp.CRLF;
LAST_BOUNDARY CONSTANT VARCHAR2(256) := '--' || BOUNDARY || '--' ||
utl_tcp.CRLF;
-- A MIME type that denotes multi-part email (MIME) messages.
MULTIPART_MIME_TYPE CONSTANT VARCHAR2(256) := 'multipart/mixed; boundary="'||
BOUNDARY || '"';
MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER := 76 / 4 * 3;
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255');
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default 'áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif');
-- A simple email API for sending email in plain text in a single call.
-- The format of an email address is one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
-- The recipients is a list of email addresses separated by
-- either a "," or a ";"
PROCEDURE mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 message IN VARCHAR2);
-- Extended email API to send email in HTML or plain text with no size limit.
-- First, begin the email by begin_mail(). Then, call write_text() repeatedly
-- to send email in ASCII piece-by-piece. Or, call write_mb_text() to send
-- email in non-ASCII or multi-byte character set. End the email with
-- end_mail().
FUNCTION begin_mail(sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 priority IN PLS_INTEGER DEFAULT NULL)
 RETURN utl_smtp.connection;
-- Write email body in ASCII
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2);
-- Write email body in non-ASCII (including multi-byte). The email body
-- will be sent in the database character set.
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
 message IN VARCHAR2);
-- Write email body in binary
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
 message IN RAW);
-- APIs to send email with attachments. Attachments are sent by sending
-- emails in "multipart/mixed" MIME format. Specify that MIME format when
-- beginning an email with begin_mail().
-- Send a single text attachment.
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
 data IN VARCHAR2,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE);
-- Send a binary attachment. The attachment will be encoded in Base-64
-- encoding format.
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
 data IN RAW,
 mime_type IN VARCHAR2 DEFAULT 'application/octet',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 last IN BOOLEAN DEFAULT FALSE);
-- Send an attachment with no size limit. First, begin the attachment
-- with begin_attachment(). Then, call write_text repeatedly to send
-- the attachment piece-by-piece. If the attachment is text-based but
-- in non-ASCII or multi-byte character set, use write_mb_text() instead.
-- To send binary attachment, the binary content should first be
-- encoded in Base-64 encoding format using the demo package for 8i,
-- or the native one in 9i. End the attachment with end_attachment.
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 inline IN BOOLEAN DEFAULT TRUE,
 filename IN VARCHAR2 DEFAULT NULL,
 transfer_enc IN VARCHAR2 DEFAULT NULL);
-- End the attachment.
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
 last IN BOOLEAN DEFAULT FALSE);
-- End the email.
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection);
-- Extended email API to send multiple emails in a session for better
-- performance. First, begin an email session with begin_session.
-- Then, begin each email with a session by calling begin_mail_in_session
-- instead of begin_mail. End the email with end_mail_in_session instead
-- of end_mail. End the email session by end_session.
FUNCTION begin_session RETURN utl_smtp.connection;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2;
-- Begin an email in a session.
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
 sender IN VARCHAR2,
 recipients IN VARCHAR2,
 subject IN VARCHAR2,
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
 mime_type IN VARCHAR2 DEFAULT 'text/plain',
 priority IN PLS_INTEGER DEFAULT NULL);
-- End an email in a session.
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection);
-- End an email session.
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection);
END;
CREATE OR REPLACE PACKAGE BODY demo_mail_heb IS
-- Sent clear Html Email
procedure send_html_mail (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default null,
p_mime_type in varchar2 default 'text/html; charset=windows-1255')
Is
conn utl_smtp.connection;
BEGIN
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => 'text/html; charset=UTF-8');--p_mime_type);
demo_mail_heb.write_text(
conn => conn,
message => p_data);
demo_mail_heb.end_mail( conn => conn );
END;
-- Sent Html Email with Attachment
procedure send_html_mail_attach (p_sender in varchar2 default null,
p_recipients in varchar2 default null,
p_subject in varchar2 default null,
p_data in varchar2 default 'áå÷ø èåá òåìí - áãé÷ä</b',
p_mime_type in varchar2 default 'text/html; charset=windows-1255',
p_file_name in varchar2 default 'but_choose_file.gif',
p_file_mime_type in varchar2 default 'application/pdf',
p_file_URL in varchar2 default 'http://10.172.246.160:7777/i/but_choose_file.gif')
is
conn utl_smtp.connection;
req utl_http.req;
resp utl_http.resp;
data RAW(200);
v_mime_type varchar2(32767):=demo_mail.MULTIPART_MIME_TYPE;
begin
conn := demo_mail_heb.begin_mail(
sender => p_sender,
recipients => p_recipients,
subject => p_subject,
mime_type => v_mime_type);
demo_mail_heb.attach_text(
conn => conn,
data => p_data,
mime_type => 'text/html');
demo_mail_heb.begin_attachment(
conn => conn,
mime_type => p_file_mime_type,
inline => TRUE,
filename => p_file_name,
transfer_enc => 'base64');
-- In writing Base-64 encoded text following the MIME format below,
-- the MIME format requires that a long piece of data must be splitted
-- into multiple lines and each line of encoded data cannot exceed
-- 80 characters, including the new-line characters. Also, when
-- splitting the original data into pieces, the length of each chunk
-- of data before encoding must be a multiple of 3, except for the
-- last chunk. The constant demo_mail_heb.MAX_BASE64_LINE_WIDTH
-- (76 / 4 * 3 = 57) is the maximum length (in bytes) of each chunk
-- of data before encoding.
req := utl_http.begin_request(p_file_URL);
resp := utl_http.get_response(req);
BEGIN
LOOP
utl_http.read_raw(resp, data, demo_mail_heb.MAX_BASE64_LINE_WIDTH);
demo_mail_heb.write_raw(
conn => conn,
message => utl_encode.base64_encode(data));
END LOOP;
EXCEPTION
WHEN utl_http.end_of_body THEN
utl_http.end_response(resp);
END;
demo_mail_heb.end_attachment( conn => conn );
demo_mail_heb.end_mail( conn => conn );
end;
-- Return the next email address in the list of email addresses, separated
-- by either a "," or a ";". The format of mailbox may be in one of these:
-- someone@some-domain
-- "Someone at some domain" <someone@some-domain>
-- Someone at some domain <someone@some-domain>
FUNCTION get_address(addr_list IN OUT VARCHAR2) RETURN VARCHAR2 IS
addr VARCHAR2(256);
i pls_integer;
FUNCTION lookup_unquoted_char(str IN VARCHAR2,
chrs IN VARCHAR2) RETURN pls_integer AS
c VARCHAR2(5);
i pls_integer;
len pls_integer;
inside_quote BOOLEAN;
BEGIN
inside_quote := false;
i := 1;
len := length(str);
WHILE (i <= len) LOOP
c := substr(str, i, 1);
IF (inside_quote) THEN
IF (c = '"') THEN
inside_quote := false;
ELSIF (c = '\') THEN
i := i + 1; -- Skip the quote character
END IF;
GOTO next_char;
END IF;
IF (c = '"') THEN
inside_quote := true;
GOTO next_char;
END IF;
IF (instr(chrs, c) >= 1) THEN
RETURN i;
END IF;
<<next_char>>
i := i + 1;
END LOOP;
RETURN 0;
END;
BEGIN
addr_list := ltrim(addr_list);
i := lookup_unquoted_char(addr_list, ',;');
IF (i >= 1) THEN
addr := substr(addr_list, 1, i - 1);
addr_list := substr(addr_list, i + 1);
ELSE
addr := addr_list;
addr_list := '';
END IF;
i := lookup_unquoted_char(addr, '<');
IF (i >= 1) THEN
addr := substr(addr, i + 1);
i := instr(addr, '>');
IF (i >= 1) THEN
addr := substr(addr, 1, i - 1);
END IF;
END IF;
RETURN addr;
END;
-- Write a MIME header
PROCEDURE write_mime_header(conn IN OUT NOCOPY utl_smtp.connection,
name IN VARCHAR2,
value IN VARCHAR2) IS
BEGIN
-- utl_smtp.write_data(conn, name || ': ' || value || utl_tcp.CRLF);
utl_smtp.write_raw_data(conn, UTL_RAW.CAST_TO_RAW(name || ': ' ||value || utl_tcp.CRLF));
END;
-- Mark a message-part boundary. Set <last> to TRUE for the last boundary.
PROCEDURE write_boundary(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) AS
BEGIN
IF (last) THEN
utl_smtp.write_data(conn, LAST_BOUNDARY);
ELSE
utl_smtp.write_data(conn, FIRST_BOUNDARY);
END IF;
END;
PROCEDURE mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
message IN VARCHAR2) IS
conn utl_smtp.connection;
BEGIN
conn := begin_mail(sender, recipients, subject);
write_text(conn, message);
end_mail(conn);
END;
FUNCTION begin_mail(sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
priority IN PLS_INTEGER DEFAULT NULL)
RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
conn := begin_session;
begin_mail_in_session(conn, sender, recipients, subject, mime_type,
priority);
RETURN conn;
END;
PROCEDURE write_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(CONVERT(message,'IW8ISO8859P8')));
-- utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_mb_text(conn IN OUT NOCOPY utl_smtp.connection,
message IN VARCHAR2) IS
BEGIN
utl_smtp.write_raw_data(conn, utl_raw.cast_to_raw(message));
END;
PROCEDURE write_raw(conn IN OUT NOCOPY utl_smtp.connection,
message IN RAW) IS
BEGIN
utl_smtp.write_raw_data(conn, message);
END;
PROCEDURE attach_text(conn IN OUT NOCOPY utl_smtp.connection,
data IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
begin_attachment(conn, mime_type, inline, filename);
write_text(conn, data);
end_attachment(conn, last);
END;
PROCEDURE attach_base64(conn IN OUT NOCOPY utl_smtp.connection,
data IN RAW,
mime_type IN VARCHAR2 DEFAULT 'application/octet',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
last IN BOOLEAN DEFAULT FALSE) IS
i PLS_INTEGER;
len PLS_INTEGER;
BEGIN
begin_attachment(conn, mime_type, inline, filename, 'base64');
-- Split the Base64-encoded attachment into multiple lines
i := 1;
len := utl_raw.length(data);
WHILE (i < len) LOOP
IF (i + MAX_BASE64_LINE_WIDTH < len) THEN
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i,
MAX_BASE64_LINE_WIDTH)));
ELSE
utl_smtp.write_raw_data(conn,
utl_encode.base64_encode(utl_raw.substr(data, i)));
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
i := i + MAX_BASE64_LINE_WIDTH;
END LOOP;
end_attachment(conn, last);
END;
PROCEDURE begin_attachment(conn IN OUT NOCOPY utl_smtp.connection,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
inline IN BOOLEAN DEFAULT TRUE,
filename IN VARCHAR2 DEFAULT NULL,
transfer_enc IN VARCHAR2 DEFAULT NULL) IS
BEGIN
write_boundary(conn);
write_mime_header(conn, 'Content-Type', mime_type);
IF (filename IS NOT NULL) THEN
IF (inline) THEN
write_mime_header(conn, 'Content-Disposition',
'inline; filename="'||filename||'"');
ELSE
write_mime_header(conn, 'Content-Disposition',
'attachment; filename="'||filename||'"');
END IF;
END IF;
IF (transfer_enc IS NOT NULL) THEN
write_mime_header(conn, 'Content-Transfer-Encoding', transfer_enc);
END IF;
utl_smtp.write_data(conn, utl_tcp.CRLF);
END;
PROCEDURE end_attachment(conn IN OUT NOCOPY utl_smtp.connection,
last IN BOOLEAN DEFAULT FALSE) IS
BEGIN
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (last) THEN
write_boundary(conn, last);
END IF;
END;
PROCEDURE end_mail(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
end_mail_in_session(conn);
end_session(conn);
END;
FUNCTION begin_session RETURN utl_smtp.connection IS
conn utl_smtp.connection;
BEGIN
-- open SMTP connection
conn := utl_smtp.open_connection(smtp_host, smtp_port);
utl_smtp.helo(conn, smtp_domain);
RETURN conn;
END;
-- Handling the Email Subject Line
function mimeheader_encode(
p_str varchar2
, p_charset varchar2 := 'UTF-8') return varchar2 is
l_str varchar2(2000);
begin
l_str:=utl_raw.cast_to_varchar2(utl_encode.quoted_printable_encode(utl_raw.cast_to_raw(p_str)));
l_str:=replace(l_str,'='||chr(13)||chr(10),''); --unfold the data
l_str:=replace(l_str,'?','=3f'); --quote question marks
l_str:=replace(l_str,' ','=20'); --quote spaces
l_str:='=?'||p_charset||'?Q?'||l_str||'?='; -- add prefix and suffix
return l_str;
end;
PROCEDURE begin_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection,
sender IN VARCHAR2,
recipients IN VARCHAR2,
subject IN VARCHAR2,
mime_type IN VARCHAR2 DEFAULT 'text/plain',
-- mime_type IN VARCHAR2 DEFAULT 'text/plain; charset=windows-1255',
priority IN PLS_INTEGER DEFAULT NULL) IS
my_recipients VARCHAR2(32767) := recipients;
my_sender VARCHAR2(32767) := sender;
BEGIN
-- Specify sender's address (our server allows bogus address
-- as long as it is a full email address ([email protected]).
utl_smtp.mail(conn, get_address(my_sender));
-- Specify recipient(s) of the email.
WHILE (my_recipients IS NOT NULL) LOOP
utl_smtp.rcpt(conn, get_address(my_recipients));
END LOOP;
-- Start body of email
utl_smtp.open_data(conn);
-- Set "From" MIME header
write_mime_header(conn, 'From', sender);
-- Set "To" MIME header
write_mime_header(conn, 'To', recipients);
-- Set "Content-Type" MIME header
write_mime_header(conn, 'Content-Type', mime_type);
-- write_mime_header(conn, 'Content-Type', 'text/html; charset=UTF-8');
-- Set "Subject" MIME header
-- write_mime_header(conn, 'Subject', subject);
-- write_mime_header(conn, 'Subject', CONVERT(subject,'IW8ISO8859P8'));
write_mime_header(conn, 'Subject',mimeheader_encode(p_str => subject,p_charset => 'UTF-8'));
-- write_mime_header(conn, 'Subject',CONVERT(subject,'IW8MSWIN1255'));
-- Set "X-Mailer" MIME header
write_mime_header(conn, 'X-Mailer', MAILER_ID);
-- Set priority:
-- High Normal Low
-- 1 2 3 4 5
IF (priority IS NOT NULL) THEN
write_mime_header(conn, 'X-Priority', priority);
END IF;
-- Send an empty line to denotes end of MIME headers and
-- beginning of message body.
utl_smtp.write_data(conn, utl_tcp.CRLF);
IF (mime_type LIKE 'multipart/mixed%') THEN
write_text(conn, 'This is a multi-part message in MIME format.' ||
utl_tcp.crlf);
END IF;
END;
PROCEDURE end_mail_in_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.close_data(conn);
END;
PROCEDURE end_session(conn IN OUT NOCOPY utl_smtp.connection) IS
BEGIN
utl_smtp.quit(conn);
END;
END;

I just bought an iPhone and it seemed to be working well until I went to sync it to my computer and it synced under my old ipod. Now when I go to text it sends as my email and I can't change it to my phone number or anything. How can I fix this?

Pretty much what the title says but if for some reason it doesn't...
I just got an iPhone 4 today and it was working well until I went to hook it up to my computer and it asked me if I wanted to set it up as a new phone or back up all my stuff from my old ipod.
I accidentally clicked that and it had pretty much ruined my phone, deleted all contacts everything. I then did a reset through itunes and now when I send a text message it sends as my email instead of my phone number.
I've gone to settings->messages and turned off and on imessage and didn't fix it.
How do I fix this?

Yeah, you fried the phone big time.
Go into iMessage settings and set the Caller ID to your phone number.

My iMessage on my mac is sending from my email. How do i change it to send from my phone number?

My iMessage on my mac is sending from my email. How do i change it to send from my phone number?

As far as I know, you can't. Your mac can only send from emailadresses

I can not send or receive email on my Iphone 5S, error message. Been like this for 3 days.

I can not receive or send email from my Iphone. Microsoft had server issues, says it is fixed but still can not send or receive emails. Anyone else having this problem?

The outrage is still ongoing, in the mean timeyou can use your browser to check your e-mail.

When i try to buy something it gives me my security questions i put them in right but saying they are worng i try to send me a email of the answers from itunes but it near shows up in my email?

when i try to buy something it gives me my security questions i put them in right but saying they are worng i try to send me a email of the answers from itunes but it near shows up in my email?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105412)

Send RFQ by email

Similar Messages

Maybe you are looking for