Send screen back to home after call

I know there's an app to set up to have the screen sent back to home screen after hanging up a call but I can't find it.  I had to have my Driod Eris hard reset and lost all apps....help!

Hi,
Rob is right it's the most simple solution for your problem.
Regards
Jaime Cordeiro

Similar Messages

  • When I try to read my e-mail my iPad closes the page and sends me back to home page. What can I do to fix this?

    When I try to read my e-mail my iPad closes the page and sends me back to home page. Any ideas how I can fix this?

    Jonmarie-
    Try resetting (rebooting) the iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything and sometimes solves mysterious problems.
    Fred

  • Yosemite boot screen back to grey after mail in service?

    Hello all. I've been scouring the internet for days in attempt to find an answer for this, and nothing is consistent. Does anyone know the official list of supported board IDs that get the new black boot screen w/ white apple logo?
    I have a 15" retina model (early 2013, 10,1), with a 2.7ghz board. I recently had to send in my computer to the mail in center because the logic board was having intermittent problems recognizing working power adapters. I also had a RAM error in AHD. Both of these issues were taken care of with a logic board replacement. Apparently my audio card was fried too, because they replaced it because of "audio distortion" that I couldn't notice prior, but that's unrelated.
    Before the logic board replacement, I was running Yosemite 10.10.2, and through no modification or intervention on my part, I had the new black boot screen with white logo. I wasn't even aware that some computers running Yosemite didn't get this new boot background. But, when I got my computer back over the weekend, it booted up to the old gray EFI screen with darker gray apple logo. I googled around and found out that some models aren't "supported" and keep the old screen. But, mine SHOULD be supported right? It was my impression all retina models that upgraded to yosemite got the new boot screen.
    When the computer came back to me, I didn't have to restore from a time machine backup either, they just kept my old SSD and put it on the new board. So it shouldn't be related to restoring from a backup or anything, it's the same SSD the computer was sent in with.
    Here's a screen cap of my system report info:
    Can anyone shed any light on this? There hasn't ever been an EFI update or SMC update for early 2013 models as far as I can find on apple's website; all updates are either for late 2013s and newer or mid 2012's and older. I figure maybe if I reinstall the EFI boot loader maybe the black screen will automatically come back? I'm thinking this stems from the fact that I had a logic board replaced without reinstalling the OS, which is when the OS would have modified the EFI boot settings? Please tell me that I don't have to actually reinstall yosemite to get the proper screen back. If that's the case, it's not worth it, but I liked that boot screen, haha.

    I do not have a tested solution to your problem but you may try: PikeYoseFix-black at your own risk: PikeYoseFix-black.pkg.zip
    In fact, I envy your for the gray startup screen and I am contemplating getting the gray startup screen back instead of my black startup screen.
    Starting up, my MacBookPro Retina may just show a black screen for up to a minute before the apple logo finally appears. this leaves me wondering if I really have started the MacBook at all. Checking the cover from the back I can see that the apple is illuminated but that is not very elegant.
    With the gray startup screen you know that you started the boot process. So even if it takes a while you are not tempted to press the start button again.

  • HT202358 iphoto keeps sending me back to update after ive updated?

    updated to yosemite i photo updated but keep sending me back to update page, round and around we go.....

    updated to yosemite i photo updated but keep sending me back to update page, round and around we go.....
    So you updated iPhoto to iPhoto 9.6? That is the only version that is fully compatible with Yosemite.
    And are you running iPhoto 9.6 from the Applications folder? The Dock icon might still be linked to an older version, or you might be running the previous version from a backup drive.  That would explain prompts to backup.  Launch your new iPhoto version by clicking the icon in the Applications folder.
    Your question links to this document:  iPhoto '11 or later: About the Library Upgrader
    Are you seeing a prompt to upgrade the iPhoto Library?  You need to run the Library Upgrader  for iPhoto Libraries created by iPhoto 7.1.2 or earlier.    iPhoto 9.6 cannot upgrade these libraries directly to the new format. They need to be prepared.  If you upgraded from a very old iPhoto version, download the upgrader as described in the link, install it, and then run it on your iPhoto library. It will be installed in applications > Utilities.

  • Certain features send me back to home screen

    So today I upgraded my 4GB iPhone to the 8GB and much to my dismay... I ave discovered that when try to change the wallpaper, instead of sending me to choose the wallpaper, it goes back to the home screen. Same goes for the camera AND photos.
    What gives? is this an issue with my particular phone having something wrong with it? or perhaps someone has some ideas?
    I already tried restarting the phone and restoring to factory settings... neither worked.

    This is happening to me too but only when im rethrieving huge email and once in a while when im browsing in the internet. after bringing me to the main menu when go back to email or website where i was before the page still there. its not bothering that much. probably this in only memory issue.

  • Full screen displays menu even after call to setUndecorated(true)

    I am trying to implement a full screen mode for my application. It still displays the menu in Windows, and in mac if I don't set apple.laf.useScreenMenuBar to true, even if I call setUndecorated(true).
    How do I hide that menu bar? I tried removing it, but then I lose my menu hotkey to toggle out of fullscreen.
    This is my sample code:
    import java.awt.GraphicsDevice;
    import java.awt.GraphicsEnvironment;
    import java.awt.Rectangle;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.KeyEvent;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.JMenu;
    import javax.swing.JMenuBar;
    import javax.swing.JMenuItem;
    import javax.swing.KeyStroke;
    public class FullScreen extends JFrame {
        static JFrame window;
        public static void main(String argv[]) {
            if(System.getProperty("os.name").startsWith("Mac OS X"))
                System.setProperty("apple.laf.useScreenMenuBar", "true");
            java.awt.EventQueue.invokeLater(new Runnable() {
                public void run() {
                    window = new FullScreen();
                    window.setVisible(true);
        private GraphicsDevice graphicsDevice;
        private boolean fullScreenMode;
        private Rectangle previousSize;
        private JMenuBar menus;
        private FullScreen(){
            JButton but= new JButton("switch");
            menus= new JMenuBar();
            JMenu menu = new JMenu("View");
            JMenuItem item = new JMenuItem("full screen");
            item.setAccelerator(KeyStroke.getKeyStroke(KeyEvent.VK_F, ActionEvent.CTRL_MASK));
            item.addActionListener(new ActionListener(){
                public void actionPerformed(ActionEvent e) {
                    toggleFullScreen();
            this.setJMenuBar(menus);
            menus.add(menu);
            menu.add(item);
            but.addActionListener(new ActionListener(){
                public void actionPerformed(ActionEvent e) {
                    toggleFullScreen();
            this.add(but);
            //prep for fullscreen mode
            GraphicsEnvironment ge =
                GraphicsEnvironment.getLocalGraphicsEnvironment();
            graphicsDevice = ge.getDefaultScreenDevice();
            pack();
        public void toggleFullScreen() {
            if (fullScreenMode){
                this.dispose();
                this.setUndecorated(false);
                this.setResizable(true);
                this.setBounds(previousSize);
                graphicsDevice.setFullScreenWindow(null);
                this.setVisible(true);
            }else{
                if(graphicsDevice.isFullScreenSupported()){
                    this.dispose();
                    previousSize=this.getBounds();
                    this.setUndecorated(true);
                    this.setResizable(false);
                    graphicsDevice.setFullScreenWindow(this);
    //                drawingPanel.setPreferredSize(new java.awt.Dimension( this.getBounds().width, this.getBounds().height));
                    this.setVisible(true);
            fullScreenMode = !fullScreenMode;
    }Edited by: jstoner on Jun 14, 2009 10:36 PM

    if (fullScreenMode){
        menus.setPreferredSize(null);
        ...  //exit fullscreen mode
    }else {
        menus.setPreferredSize(new java.awt.Dimension());
        ... //enter fullscreen mode
    }

  • Screen gone black straight after started calling

    In my Lumia 930 screen goes black straight after call is started. Why us that and how I can fix it?

    See under Try the following HERE

  • How do you send movies back to iCloud

    How do you send movies back to iCloud after watching them

    Movies are not stored in your personal iCloud account.
    Delete the file from the device (it will still be available for download again).

  • I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen.  What am I doing wrong?

    Hi RWD2,
    Welcome to the Support Communities!
    To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398?viewlocale=en_US
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    I hope this information helps ....
    Have a great day!
    - Judy

  • My iPad won't let me stay on some games and web sites. It sends me back to my home page after I have only been on the site a few minutes. How can I fix this?

    My iPad won't let me stay on some games and web sites for more than a few minutes . It closes the site and takes me back to home screen. Why and how do I fix this?

    For Safari you could try clearing its cache and history via Settings > Safari.
    For Safari and your other apps you could close them all completely and then see if they work when you re-open them : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

    The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white,  goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • HT1689 I want to close apps running in back ground but after double clicking I dont get apps running in back ground instead photo apps open after double clicking home screen

    I want to close apps running in back ground but after double clicking I dont get apps running in back ground instead photo apps open after double clicking home screen Please help.

    iPhone 3G does not support multitasking

  • I can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

    i can't access my mail,contact,calendars settings on my iPhone after update . i press the icon in setting and it just goes back to home screen.

    i have the same problem with my iphone 4.and when synching with itunes it says "can't synch contacts with iphone because iphone is using contacts. close contacts on iphone and synch again."

  • My phone screen goes blank and after a minute or so goes back to home screen. why?

    hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

    Howdy mbaeguasu,
    It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    So long,
    -Jason

  • I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    I have 2 hotmail accounts. They worked fine the first month or so, now about 20 seconds after I sign on, it goes to an send message screen but I cannot send. When I go back to inbox, it resets to the send screen again. HELP.

    Here you can see how you can setup your Hotmail accounts in the Mail App on the iPad; http://convert-dvd-ipad.com/dvdipad/setup-hotmail-microsoft-exchange-ipad-2/

Maybe you are looking for

  • Can we have a common database for TARGER and CATALOG in RMAN?

    Hi, Can we have a common database for TARGER and CATALOG in RMAN? I am trying to duplicate a auxilary database using rman. In this situation can i have common db for target and catalog? Please suggest. Thanks Naveen.

  • Skype number used in a different country

    Hello, are we able to use skype with a local number of a certain area and use it in a different country?  hope to get a response

  • Capture Screen in Adobe AIR

    Hi All, I would like to capture a screen shot based on the defined rectangular area in Adobe AIR. I don't want to use any third party tool. I would like this to be purely in Adobe AIR. I have googled a lot but couldn't find any luck. Please give me a

  • ITunes quickly auto-crashes on start-up

    Hello, Strange thing occurring for a couple of weeks with iTunes: it hangs after a few seconds. The window appears, then freezes within seconds. With or without doing anything else. With or without internet access, with or without an iPod/iPad connec

  • Project Folder Structure.

    Ok, this is a question that possible has more then one correct answer however I would like to know your opinions about this one. On the internet (google, ant documents, maiven, etc) they have different standards on how the folder structure for the pr