Send snmp when config changes

Hi all
I have an ASA 8.2 and I would like to know if theres any snmp trap that can be sent. when a configuration is made.
Thanks

You could try the following command.
snmp-server enable traps entity config-change
This is assuming you have your authentication correctly configured as you would need your users to use the same password as their login password for the enable password. for example:
aaa authentication enable consol LOCAL
Please remember to select a correct answer and rate helpful posts

Similar Messages

Generate SNMP TRAP when config changes

Hello,
Is there any way to generate a SNMP trap when new config is saved in ASA 5510?
We are running ASA 8.3
Thanks.

I have a clue about how to do it.
I use in the asa the fallowing command:
snmp-server host DMZ 10.153.50.5 community *****snmp-server enable traps entity config-change fru-insert fru-remove
And I setup a snmptrapd on a lin
/etc/snmp/snmptrapd.conf# Example configuration file for snmptrapd## No traps are handled by default, you must edit this file!# authCommunity log,execute,net public# traphandle SNMPv2-MIB::coldStart /usr/bin/bin/my_great_script coldux box.
But it doesn´t works when I do a config change, it doesn´t generate anything on the linux box log.
Any idea?
Thanks.

SharePoint 2013 document library workflow to send emails when document changes

Hi All,
Need a email alerts to setup when documents get change in a SharePoint 2013 document library. Mail should go to all the members in a SharePoint Security group.
Many Thanks
sudesh withanage

Out of the box , You cannot set alerts for SharePoint group. You may try -
1- Create a group in active directory, add users to the ADgroup. Add that ADgroup in Sharepoint and configure alert.
2- You can set up a new user and change their email to that of a distribution list, and then assign the alerts to this user.
3- You can create a custom workflow/action or event receiver that will send an email to a distibution list or programmatically traverse the SPGroup's members and send them the notification email, whenever an item is added or changed.
4- You can try this , this was for WSS3 -
http://advancedalert.codeplex.com/
5- you can to use SharePoint Designer and create a workflow that send an email to SharePoint group.
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free

looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.

I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers. I did not say it will work with any carrier at one time. I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it. As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you cna purchase a SIM card that works with your new carrier.
The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince. I was thinking something more along some of the really durable cases at BallisticCaseCo.com
As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped. For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc. I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time.

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?

Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??

I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.

SIP stops when upgrading from ASA from 8.4.1 to 8.4(2)8 w/ out config change? Why?

I have to be missiong something small in my config.
If I upgrade my ASA 5510 which I am routing and NATing off of, from 8.4.1 to 8.4.2.8, SIP stops. All phones go dead.
If I roll bck to 8.4.1, SIP comes up.,... Go bck to 8.4(2)8 nd SIP goes down.....
This is without mking any config changes.
I have looked at it so long, I must be overlooking something simple, simple, simple...

Have spent sIx hours in past 24 w/ Cisco TAC and they have a tin of caps as have I but can't figure out why there is a denial of SIP from inside outside and outside inside to/from sip providers three IP addresses. Have created new access lists, new access groups to allow all 3 ip's in & out, increased timeout, bypassed IPS, have both sip UDP & tcp allowed in/out, specified inspection to approve any any for all sip protocols in/out to/from Lync & mediation and nada.
To answer another question, yes I'm certain config doesn't change... I reloaded tge same running config from a bkup just to make sure.....
What I see in the logs coming in/out is the call does make it all the way through the SSM to the ASA..
What happens there is the head scratcher...
SiP even though allowed and even though I've specified it to push through inspection On ASA side is denied based on inspection rule...
I also tried using another one of my (unused) public IPs for only SIP thinking that maulybe there was a core conflict with multiple services NATd to the same public IP but that also did nothing.
On topology I only have a single location so I'm using my 5510 to route as well...
Have 1 IIS web server l, SQL, (ports clised except to obe vendor and am allowing via access list by their IP and ipsec,) Exchange, Lync, Ironport, Endpoint and everything else is 80/80...
Everything is on Server 08r2 w/ exception of web server and two boxes ( one stand-alone & one VM on hyper-v) I am running Server8 for Microsoft TAP engineering / validation airlift. Neither of those are attached to UC/UM at all...
I'm using dynect from dyndns for outside network web services and just piggybacking on time Warner metro e for internal (no physical DNS server)
When I look at caps everything is identical in the tcp and UDP trace even on sip except for the denial...
Which caps/logs would 'y'all like to see and I'll post em when I get home....
Is there a link to bug notes Jullio? Is it sip specific? Any possibility of it being just a name/cosmetic big I can force a work around to?
I recall when Asa first was released I had to specify port 25 allow instead of being able to simply say allow smtp .. That took 2 weeks but it allowed for a work around so whatever I can do/try I'm willing!! Someone may wanna tell TAC if it's a bug because after 6 hours yesterday they are saying there's not a bug... :)
Thanks all!!!!

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

Change sender address when use function SO_NEW_DOCUMENT_SEND_API1

The requirement need change the sender address when use function SO_NEW_DOCUMENT_SEND_API1.
for example,the fixed sender is '[email protected]'. how to change the sender address. could you please
provide a instance?

Hi 莫言，
As explained in mail home wiki here, this function module is obsolete and complex to use, please use CL_BCS instead. You can find lots of example there. And it is pretty easy to change sender address using CL_BCS instead.
Best regards,
Jerry

Does anyone know why when i change a contacts number and then try to send them a message the old number still pops up??

Does anyone know why when I change a contacts number and then try to send them a message the old number pops up aswell??

The phone remembers recently used numbers just like how Mail remembers recently used email addresses. As time goes by the phone will eventually forget unused number that are not in your contacts as long as you do not use it. Same for unused email addresses that are not in your contacts.

Send Email when built in approval workflow status column changes to approved

I Implemented the built in approval work flow in a document library,I want to send an email when the column indicating the status of the workflows changes from in progress to approved.

Hi ,
According to your description, my understanding is that you want to send email when the built-in approval workflow status was approved.
For the default built-in approval workflow, per my knowledge, there is not a way to modify it. As a workaround, you can create a Reusable Workflow with SharePoint Designer 2010, and publish it to your SharePoint, then you can use it like the built-in approval
workflow.
You can do as the followings:
Install SharePoint Designer 2010.
Open your site with SharePoint Designer 2010.
Click Workflow under Navigation.
Click Reusable Workflow, and type a name.
Add “Start Approval Process” action, in the ‘these user’ , type the approvers.
Click ‘Approval’ field, and under Customization, click “Change the behavior of a single task”.
On the “When a Task Completes”, add “Send an Email” action in the approved condition,like the screenshot below.
Then save and publish the workflow, then you can use the workflow in your SharePoint site .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

When i changed my apple id password it send me back to trial on elements 12

i bought elements 12 in july 2014 and i had an issue with my password for my apple id and when i changed it set my photoshop back to trial version my wife deleted email with serial number but i do have the purchase email

Same issues here. I try and log into face time and cloud, it tells me my email is not veryfied. I go back through the link sent in the verification email and, low and behold, it tells me my address has already been veryfied.
Getting really annoyed now. I have tried using a different email to log in with, but not even getting the verify email in my inbox, even after it states it has sent one.
CMON APPLE!!! Please resolve this glitch.

Prime Infrastructure 2.0 - Alert on Switch Config Change

We are in the process of testing out Prime Infrastructure 2.0, is there a way to get an alert when a device's configuration has changed, and send out what has changed in email? I have scheduled Config Archiving for all of my devices, and i can see the config differences when a changes is made in the Prime GUI, but we currently use Kiwi CatTools to send out emails that show what devices had configuration changes and what those changes were, it would be nice if Prime would do that so we could do away with that service. I have looked through all of the reports but do not see anything.

Hi,
I know this feature is there is LMS ,where you can configure the AUTOMATED Action based on Syslogs to get an Alert for config change or any other changes ,however I do not see this option available in PI 2.0.
Syslogs are not compltely supported in 2.0 but in PI 2.1 we should have the complete support for syslogs.
Thanks-
Afroz
[Do rate the useful post]

There is any built in mechanism that send trap when cabel disconnected?

I have IPMP on solaris 10, with 2 nics.
there is any tool\pkg\ mechanism in solaris that can send snmp trap (to SMU)
when cable disconnected or nic is down?

If you are able, convert your WMV audio to WAV 48KHz 16-bit PCM (the excellent free Audacity can do this).
When importing your assets did you leave PRE alone to complete its conforming? If not try again and leave it to do its thing.
What have you changed in your system since it last worked? You could maybe try a system restore to a time earlier.
Move the Soundtrack Audio to a higher audio track (e.g. Audio 2). Both soundtrack and narration tracks are known to occasionally mess things up - no-one knows why.
If you haven't already work through PrE Hanging, or Crashing - Some Tips.
If that doesn't work take a look at Got a Problem? How to Get Started to see additional information we need about your hardware, assets, and project settings.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Is There a Tool to Track Config Changes?

I am looking for a tool or a way to track the configuration changes that I make to my devices. I have tried everything from looking for a program that will help to track the changes to just using an Excel file. There has to be a better way...
I know that Putty offers the ability to log the output, but I don't want to do that and possibly have to search through a bunch of output to see what I actually changed.
I have a Nexus 7004, 4 stacks of 2960s, a few 3560s, and a few 2811 routers.
Anyone know of an easy way of tracking config changes? Thanks!

Richard Burts wrote:I have two solutions which might be helpful. If you are looking for products that will archive copies of configurations and help monitor changes I have used that capability in the product NetMRI from Infoblox and found it pretty effective.
I have used NetMRI from Infoblox and I found the product to be not as good and flexible as RANCID. RANCID is the best solution for archiving configuration of Cisco, Juniper and Checkpoint devices, bar NONE. The difference between RANCID and NetMRI is that NetMRI is very rigid whereas RANCID is customizable. If you know linux well and scripting, you will be much happier with RANCID than NetMRI
If you are looking for something that is not product based I will mention that I have a customer that configures aaa accounting for level 15 commands which allows them to send log records that contain all of the config commands that were entered (or at least all config commands entered when the device was on line). That have given us the ability to go back and look and see exactly what was changed. The effectiveness of this is dependent, of course, on whether you use aaa accounting and on whether your log records are searchable.
you can do this with either 1) open-source tacacs via aaa accounting or 2) syslog
On the new IOS, syslog will record every commands. You can also use AAA accounting to track those changes as well. You can build your own open-source AAA server and tell the router to send AAA acounting log to separate AAA servers. Again, if you're good with Linux, scripting and/or mysql, you can dump the accounting log into mysql database and you can search whatever you need in seconds
Easy right?

Problem with WHEN-CHECKBOX-CHANGED and ON-POPULATE-DETAILS

I have a detail block with a relationship set up to a second block. In my first block, if I cause an error but the next action I take is to press a checkbox on another record, my error will display and the raise form trigger failure is triggered but the checkbox changes it's value and the cursor is displayed on the record with the error. I didn't want the checkbox to change if an error occurred. I tracked this through the trace and saw the on-populate-details is fired between the error and the when-checkbox-changed trigger. I went through debug and saw because of the erorr, the system will do a 'return' back to the sending action. I beleive this return is causing the when-checkbox-changed to fire. I'm just guessing here. I tried a similar action on another form without a relationship set up. That would eliminate the on-populate-details trigger. When I did a similar error, I got exactly what I was looking for. I caused the error but pressed the checkbox on another record. The error displayed but the checkbox did not change and the cursor returned to the error record. I need the record to have this relationship. Consequently, I need the on-populate-details trigger. Can anyone think of a solution? I'm currently on Forms 6I. We are going to forms 10G in the next few months. But I really need a solution on my current set up. Thanks.

The getNextDatabankRecord() call is at the beginning of my run code. I use one step just for this line code.
Code :
public void run() throws Exception {
          beginStep("CHARGEMENT DES DONNEES SUIVANTES");
               info("Chargement des prochaines données...");
               getDatabank("NouvellesIA").getNextDatabankRecord();
          endStep();
Stop the user after this step and goto the finish section should not be a problem...
If I use the "When out of records" option, does it jump directly to the finish section ?
Thanks,
Benoit.

Send snmp when config changes

Similar Messages

Maybe you are looking for