Send Stock & Sales Idoc to Vendors

Hi There,
I need to send an Idoc to Vendor in order to report Stock and Sales, I have found the following transaction:
transaction WVM2 - Transfer Stock and Sales Data
This transaction generates Idoc per plant (PROACT01), the problem that I have is the creation of the partner profile, apparently there is not (Application/Message Type/ Process code) for this process. I would like to know how can I create the partner profile for this process outbound.
Thanks in advance
Regards

hi Alexis,
have a look at this page:
http://help.sap.com/saphelp_45b/helpdata/en/86/37e61cf09b11d18ca1080009d10d9a/content.htm
I used this IDOC 3 years ago and as far as I remember there was nothing special involved
you just need to maintain:
Materials Management -> Purchasing -> Messages -> EDI -> Profile for sending
Stock/Sales Data
and we20
and send it via: RWVMIPAD
you can also have a look at this doc:
http://help.sap.com/bp_retailv1470/Documentation/EN/VMI_EN_CUST_V147.doc
it shows message type and IDOC basis type for outbound proact
is this what you need?
Regards,
michal

Similar Messages

  • Sale Order Subcontracting & Vendor wise stock

    Dear Gurus,
         I have one doubt we are doing sale order subcontracting transfer posting by 311 E to vendor. so is it really need to create vendor wise storage locations to track the stock at vendor end,  as we have no. of vendors for subcontracting and storage location is part of organization structure.
    so is it advisable to go like that ? or please suggest me any other way to track the stock at vendor end sale order wise.
    Thanks & regards,
    Akshay

    Hello Sir ,
    As it is not possible to send material which are already in special stock (sale order stock ) to subcontractor by 541 movement type , it is recommended to transfer by 311 E my MB1B or MIGO...
    while doing good receipt 101 E and 543 E will going to happen , for 543 E system will automatically ask storage location. i have done already this but there only one subcontractor was there,
    and in this client we have more than 80 subcontractor so i am hesitating to do this....
    Subcontracting for Sales Order Stock and Project Stock - Managing Special Stocks (MM-IM) - SAP Library
    Sale Order Subcontracting & Vendor wise stock 

  • To send IDOC to vendor from SAP for purchasing order

    Hi Gurus,
    I want to setpu an EDI for send the outbound & inbound idocs to vendor for purchasing order from SAP and below are the message type I am using:
    Outbound message type :
    ORDERS
    Inbound message type :
    ORDRSP
    INVOIC
    I know how to set up the link, making the partner profiles attaching the process code, assigning the ports but I want to know the below customize set up:
    1) Which transaction I need to used for customize this sceranio
    2) Could you provide me any documentation which specifies the steps for configuration
    And other details which I am suppose to know.
    Please reply me as soon as possible as I am urgently in need of this.
    Regards,
    Sagar

    Hi Sagar
    For the Confirmation you need to do the customizing for confirmation control, like what would you like to do after the confirmation. Confirmation is an inbound process.
    For Invoice you need to complete the customizing under LIV in SPRO- for Invoices received via EDI.
    Please go throught the help link for further details.
    http://help.sap.com/saphelp_47x200/helpdata/en/a8/b99f58452b11d189430000e829fbbd/frameset.htm
    Reward points if useful
    Thanks & regards
    Kishore

  • Stock take for sales returns and vendor consignment

    Dear Gurus,
    Can you help which T-code to use to create physical inventory document (batch input) for sales returned stocks (status: returns) and vendor consignment stock?
    I have been searching the posts here but looks like not able to found similar post...
    Many thanks,
    Trang

    there is no special t code.
    use MI01.

  • Movement type for transfer of stock from Stock-in-transit to Vendor

    Hello,
    Is there any movement type for transfer of stock from Stock-in-transit to Vendor.
    For internal transfer from Plant to Plant we follow Purchase Requisition -> Stock Transfer Order (PO – Modified) -> Delivery (VL04) -> MIGO (Goods Receipt against Delivery) method.
    The problem arises when the actual delivery quantity is less then what is entered in the system (due to clerical error). That is, physically less quantity were dispatched and received at the receiving plant. Now the balance quantity is lying as stock-in-transit. To clear it we are receiving the material and using transfer posting for plant to plant transfer. Though physically there is no transfer of goods. Now we do not want to receive the material instead we want it to transfer from stock in transit to the supplying plant. Is it possible ?
    Thanks.
    Ashish

    Hi Ashish,
    When You issue the stock,  the accounting document is posted . There is no accounting entires when you do Goods receipt at receving plant . In case , we are developing to make it happen , I feel it may have impact on the Material Valuation aspects .
    Hence, I feel it is better to adopt any of the following 2 options.
    1) Cancellation of the entire delivery and make new delivery   or 2) Receive the entire qty  at the receiving plant and decide what you want to do with the unavl  qty . For example in your case of loss of material due to accident , you can scrap the material in the receving plant itself  or return the material back to the sending plant.
    Regards
    Mani

  • Want to send the Sales Order No  in Alert message

    Hi,
         my scenario is  IDoc to File.  suppose due to sme validations my message got failed in any where. immediatley I'm  sending an Alert to End User . But as per the prsent devolopment End user is not understaning  that which Sale order got failed. End user is not capable to open the Hyperlinks of the message monitoring . So, user is asking to send the Sales order no inside the Alert message (Mail) .
    is it possible to send the message content also inside the Alert Message (Mail)
    Regards
    Jain

    is it possible to send the message content also inside the Alert Message (Mail)
    Since the salesorder number comes from the payload....you need to introduce a BPM here....there is no other option than this to get a value from payload into alert message..
    There is a blog by Michal explaining the same....please check...if i get it will update the same:)
    this is the blog i am talking about....check if it helps you..
    /people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
    Regards,
    Abhishek.
    Edited by: abhishek salvi on May 7, 2009 8:09 PM

  • PO Change IDoc to Vendor

    Hello,
    I wonder if a SRM expert might help me in locating an appropriate place (BADI?) to insert IDoc generating logic during a PO change.  I am in SRM 7.0 and need to send a Purchase Order Change Request  (EDI 860) to the vendor via IDoc.
    Thank you,
    JR

    Hi,
    I wonder why would you want to do that. Any change to the PO is internal to your organisation till such a PO is ordered(approved). Once ordered you can anyways send the output to you vendor which would inform him of the changes.
    Regards
    Azad

  • How to transfer customr return stock to jobwork ( reapir) vendor

    Dear All,
    Please let me know -
    Suppose i had a customer defective (customer returns)stock in my plant ( which is non valuated stock). I would like to send the same for repair/ service to outside from my plant.
    I do not want any valuation / accounting effect while sending the customer defective material outside. So please suggest me-
    How to transfer customr return stock to jobwork ( reapir) vendor ? Through which movement type ? GR MvT ?
    Waiting for reply.
    Thanks & Regards
    Mangesh

    Hi,
    You can send the material using movement type 512 in MIGO using option Goods Issue > Others. And cancel the same material document when you get the materials back from vendor after repair.
    Then follow Service Process Cycle for paying the repair charges to vendor
    1. ME21N - Create Service PO (With Item Category D and Account Assignment Category K )
    2. ML81N - Create Service Entry Sheet w.r.t. Service PO
    3. MIRO - LIV for Service Charges w.r.t. Service PO or Service Entry Sheet
    For Service Process, refer following link;
    [SAP External Service Management|http://www.sap123.com/showthread.php?t=52]

  • Accrued Sales Tax Amount  & Vendor Charged Sales Tax amount

    Hi,
    I need to Genertate a Report for Sales Tax. Please suggest TABLE & FIELDS names & information  of
    +Accrued Sales Tax Amount+
    & Vendor Charged Sales Tax amount
    Thanks in Advance.

    Hi Harshita......
    Think why you want to change the Tax Amount at transaction level?
    Because you want to match the figure with the Hard Copy.
    So if you change the Tax Amount at Outgoing Excise Invoice level then how Delivery And its AR Invoice Total will be vary?
    By the way If you see the JV of Delivery it is not at all matched with AR Invoice provided Purchase Cost should not be equalt to Sales Cost.
    Delivery is only concern with stock not value.....
    SO there wont be any problem I guess......
    Regards,
    Rahul

  • Sending material from one subcontracting vendor to another vendor

    Hi Experts
    we have a scenario we have more than one subcontracting vendors.so the unused raw material should be send to one vendor to another.so how can we configure it.please give me feedback.
    Thanks in advance...

    Hi Madhu ,
    What do u mean sending unused material from one vendor to another ?
    In subcontracting u can send material to only one vendor at a time.
    Regards
    Ramesh Ch

  • Cost of Inventory for Special Stock- (Sales Order Stock)

    Dear All,
    We manufactures "x" materail under Make to Stock and Make to Order Scenarios. We carried the standard cost estimate through CK11N and released through CK24N. There is a value of "X". Also we carried the sales order cost estimate that is value "Y". But we have observed the inventory value updated during confirmation of the production is at "Z" value. We have identified this Z value is the value of special stock previous periods.
    I would like to know the procedure of valuation of inventory under scenarios
    Regards
    Anilkumar

    Hi,
    thanks for your info.
    Can i say the changes will be done for those special stock.?
    Actually my problem is related to a Return Sales order process where we need to change the MAP before DO and GI, otherwise the Material document would not capture the correct MAP during GI.
    and the solution from the senior is select the variance "special stock -Sales order" and enter the sales doc# in MR21.
    The problem that we are not yet having any special stock for this return Sales order, but this MR21 works for us and after that, the material document is able to capture the correct MAP.
    Any idea what or where the MR21 is updating for the "Special Stock-Sales order" if we don't have any Sales order stock for the paticular sales document?

  • Error message mes when trying to send PO via IDOCS to another system?

    Hi Abap expert,
    I am getting wired message what I ma trying to send PO via IDocs to other SAP system.
    I went to all partner , port configurations on WE20 and everything there seems to be fine but once I go to ME23N, then GO TO -> MESSAGES , than opens another windows when you key in MESSAGE CONTROL DATA that have been mantained
    in the outbound parameters in the PARTNER PROFILE configurations.Then I am getting the message :
    'No communication data has been defined for transmission medium 6'-----
    The LED on "PO:output screen' is YELLOW and never gets green.
    Can someone tell me how to overcome this and send my PO Idocs?Please some more details will be appreciate it!
    Thank you much eveyone!
    Boby

    Hi,
      Go and check it in NACE tcode, whether , Condition type, output types are maintained or not? if not maintained, Maintain it for 6 -PO for EDI.
    Hope this is the error you are getting.
    Thanks
    Manju

  • How to send the Sales Order to another user id within SAP

    Gurus,
    I have created a sale order through VA01.  Sales order number is generated.  Now that sales order I want to send it to another user.
    Is is possible, if how.
    I know we can send the reports like FBL3N, by selecting list and send there we can give the user id to whom we have to send.  Like that i want to send the sales order, how.

    Hi,
    For the standard report you can use the sending function from the menu, but sales order is a document, there is not the sending function in the maintenance view with t-code VA01 or VA02. Because the document should be printed out, you can define a condition type and create a condition record in background, let it send out a copy of sales order automatically when document saving.
    Hope it's helpful to you!
    Regards
    Tao

  • 0SD_C03 Sales Overview and Vendor Information

    Hello,
    I am using BI 2004s with Business Content 3.5.  I would like to create a sales report such as sales by vendor.  I am using the Sales Overview cube 0SD_C03 and tried to use the vendor information as an attribute from the material characteristic in this cube but the vendor information is empty.  I am told by our consultant that this is because it is not part of standard business content. 
    My question is: Is there any other way to get Sales (billings) by vendor?  What have other people used to get Sales by vendor.  Have they just made a change to standard business content to include Vendor information?
    Thanks.

    Hi
    The best option in this case in enhancing the business content by adding the required field Vendor and populating the related values
    Before that you can check in R/3 whether any standard reports are there which lists of Sales by vendor. If such a report exists, you can just replicate the report to complete your task
    One suggestion
    Please check the following report in R/3 ..S_ALR_87014367. whether is fit for your requirement or search some other reports
    Assign points if useful
    Regards
    N Ganesh

  • Does Cremas Idoc supoprt Vendor Evaluation

    Hello,
    My requirement is such that, whenever a Vendor Evaluation i done,
    The report ME6F, the same needs to be sent to a Non-SAP system through IDoc or Proxies.
    We have PI as the middleware.
    so is there any specfic Idoc for vendor Evaluation or does Cremas Idoc have provision for the same.
    Or are there any BAPI available that can be used in ABAP Proxies.
    Regards,
    Abhishek

    Hello,
    My question is, as you mentioned that CREMAS support Vendor Evaluation.
    I am asking which is the segment, which has the relevant fields or vendor evaluation.
    Regards,
    Abhishek

Maybe you are looking for