Send the Configuration via TFTP server to New Router/Switch
Dears,
I need to apply a policy that for any new router or switch installation, specific configuration will be sent to these devices through one centralized TFTP server which comply with our configuration and rules, this is to avoid any miss configuration from the team and control the junior network Engineer to add any wrong configuration that can effect the network, is this possible? And how?
Dears,
I
need to apply a policy that for any new router or switch installation,
specific configuration will be sent to these devices through one
centralized TFTP server which comply with our configuration and rules,
this is to avoid any miss configuration from the team and control the
junior network Engineer to add any wrong configuration that can effect
the network, is this possible? And how?
Hi,
I dont think is there any mechanism but yes to secure you can configure on router that tftp source interface for tftp server cofniguration upload and download into router or on server.
Hope to Help !!
Ganesh.H
Similar Messages
-
I updated Firefox and now, when I select File, Send Link, a dialog box pops up asking me to establish a new account before I can send the link via email. I use Outlook, so how do I avoid setting up some new account and yet am able to send the link via Outlook?
I have a feeling it may have something to do with HotMail.com.My Error: I found out that it was Mozilla Thunderbird that was causing the problem. I uninstalled it and the problem went away.
-
Package Configuration via SQL Server For a Reporting Queue
The scenario is a reporting queue for a web application. Currently when a user queues a report it stores the parameters in a table by queue ID. When that report is set to run the database creates a dtexec command with all the parameters. We use this
method for transferring the values the user selected to the SSIS packages.
I have used SQL Server package configurations before but they are usually a single table with a distinct ConfigurationFilter column. Is it possible to take the standard table layout for the SQL Server package configuration and add another column, say
QueueID. We send the QueueID to each package at run time and use this value to filter the table to the configuration specific to that report?Here is a better break down of the current process:
1. A user goes to the web application and selects a report/parameters.
2. This will add data to [QUEUE] and [QUEUE_PARAMETERS] tables associated by the QUEUE_ID
3. The server has a windows service which looks for reports in the [QUEUE] table in pending status and gets the next one available and calls a stored procedure with that QUEUE_ID.
4. The stored procedure puts together a dtexec command through xp_cmdshell which contains all the user parameters from the [QUEUE_PARAMETERS] table.
The purposed process is to replace the self made [QUEUE_PARAMETERS] table with the package configuration table. This means we would only have to send the QUEUE_ID via the dtexec command and not all the other parameters. The problem is that if
I add QUEUE_ID to the package configuration table I am not sure how I would reference a specific QUEUE_ID from the SSIS package configuration dynamically. There does not appear to be an expression that can be applied to the package configuration in SSIS
which means the relationship must make the ConfigurationFilter field unique, even though it is not a primary key. -
I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank youSergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.
-
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. the button did not work and i looked online and saw where you could change it to a regular button and enter the email for it to go. it worked, but only for those with adobe pro. i could not get it to work with reader. is there a way i can make it work for reader?
Noted.
The LiveCycle user to user forum is across town at:
Adobe LiveCycle
Be well... -
Hi, can anybody send the configuration steps of SOLUTION MANAGER
hi,
sap gurus,
can any body send the configuration steps of solution manager
its easy but logical
plz help me on this.
id is timmampalliatgmaildotcom
regards,
balaji.t
09990019711.Hi
Refer to this link
http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
Raghu -
How configure sending CDR reporting via ftp server
hi
i want to send the CDR reporting automaticly to FTP billing server each 1H.
i have add the billing server
i don t know how or when can i configure the automatique sending CDR report to this server
Thanks for your helpYou'll need a SFTP server instead of FTP.
For instructions, please see here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_1_2/admin/sacdrm.html
Thanks!
Michael
http://htluo.blogspot.com -
How to run the report via application server
Report not running?
hi All,
I am calling the report via forms, In application server i had recompiled the reports in two different format too.
1. myreports.rep
2. myreports.jsp
I have called the report from the menu and i used code like below
Declare
V_id Varchar2(100);
Begin
V_id := Run_Report_Object('myreports');
End;but i am getting following error.
Frm-41219:Cannot find report:Invalid ID.and subsequently an another too.
Frm-40738:Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.please guide me
kanishI using Forms 10g R2, i store the recompile version in Application server.
Good, so you can refer to the metalink note I mentioned above, as per storing the reports in the application server, the default place for running reports is not a folder in the FORMS_PATH, the REPORTS_PATH is set in the $ORACLE_HOME/bin/reports.sh file, pointing by default to the sample folder - $ORACLE_HOME/reports/samples/demo, for testing purposes you can put your report there and try it again, or you can modify the REPORTS_PATH variable in the reports.sh file to point to the directory you were mentioning.
Note: I am calling the report throug menu using the eariler posting code.
I would recommend to create a Form to call the Report, I am not sure if there are restrictions about invoking a report directly from the menu.
About the code, you are missing a lot there, refer to metalink note mentioned above, here is an excerpt from that document.
PROCEDURE TEST_REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;
In my eariler version 6i (2 tier) when i call the report it invoke parameter form. will 10g also behave same like 6i?
Yes, there is still a parameter Form which runs in an HTML page.
*1. Should i want to create any Report_Path, Report_classpath ? if yes ,where should i ?* It will depend on your configuration, the easiest way is to setup the REPORTS_PATH in the $ORACLE_HOME/bin/reports.sh file, if you are configuring the reports server to use environment ids, that would not work and you would need to setup the REPORTS_PATH directly in the reports engine configuration file .. $ORACLE_HOME/reports/conf/rwserver.template.
Edited by: Rodolfo Ferrari on Jun 3, 2009 3:19 PM -
Configuring Cisco TFTP Server for CUCM
Hi,
I currently have a Publisher and two Subscriber (v 6.1.3), I have now gone over the magical 1250 devices where Cisco recommend a standalone TFTP server.
I understand to deploy it I need to add it to the Publisher as a Server and then once up and running enable the Cisco TFTP service, then update the Option 150 address in my DHCP scope to point towards the new TFTP server.
A couple of questions, does the TFTP server need the following installed at the same level as the Publisher/Subscribers:
Dial Plans
Device Packs
Locales
Thanks and any other comments appreciated.Hi Ian,
- By architecture, the TFTP server would be the one pushing out the firmware load and to the phones - so you would need your device packs, containing the bundle of firmware loads, to be on your standalone TFTP server.
- locales install files which the phones get from the TFTP server, such as their dictionary - so you would need locales on the standalone TFTP server
- Dial plans are files used by the CCM binary file. If you are not planning on running CCM service on the server ever, you don't need to install dial plans on that server. However, as best practice, it is good to have dial plans, locales and device packs uploaded on this standalone TFTP server, in case the server roles were adjusted at a later point in time.
- Sriram
Please rate helpful posts ! -
How to send the data to SQL server group in Reciever JDBC scenario
Hi Experts,
I have done IDOC to JDBC scenario, the data is successfully going to SQL server in reciever side, but in reciever side they got local server and other server groups also there, the data ia m sending is going to local server group, so where can i mention the other server group name in reciever JDBC adapter.
Kind Regards,
Praveen.Hi,
Except if there is a way to specity this in the URL field (either using a suitable properties or a specific syntax), I do not see such feature in the JDBC adapter ... I'm not familiar with SQLServer group concept, but maybe you could use multiple receivers instead ?
So far, I haven't been able to see how to use groups in the URL ... Maybe there is way to trigger replication at SQLServer level ? Stored proc ?
Chris
Edited by: Christophe PFERTZEL on Dec 9, 2009 11:26 AM -
How to send the email without using server side (Php, java)
How to send the (Run time image or file) Email & Attachment in Flex web application. without using php, java.
Well, at some point your email needs to be handed over to an SMTP server. It's a fair amount of work, but if you want to just send an email you could open a socket to a mail server's SMTP port and follow the SMTP protocols to send your email.
ActionScript sockets: http://help.adobe.com/en_US/ActionScript/3.0_ProgrammingAS3/WS5b3ccc516d4fbf351e63e3d118a9 b90204-7cf7.html
SMTP protocol: http://tools.ietf.org/html/rfc821
-- Tom -
Can I send the information any contact as a vCARD via SMS? If yes, does anyone know how?
Matthew, I'm sorry if it seemed like I was biting your head off. I appreciate your suggestions and your time, it's just that I'm two weeks into it and the iPhone has been a huge disappointment. I get "call failed" on the first two to ten tries of every single call, one in two SMS messages fail, calls to me go directly to voice mail without the phone ringing, and when I go looking for basic functionality it doesn't exist. In essence, I don't have a phone. I have a fancy and pretty iPod with a very expensive monthly fee that doesn't include music. My disappointment, however, doesn't extend to your trying to help. Sorry again.
-
CCM 5.1: How to re-send the CDR to Billing Server
Dear Sir,
When the SFTP is broken and re-connected, the CDR manager does not re-send the CDR records that generated during the connection broken time. How can I or CCM re-send these records to Billing Server again to keep the Billing Report Coorect?What type of SFTP software is being used on the destination server?
The following is a list of Cisco tested and supported and tested FTP/SFTP servers for CDRM as billing server:
Unix/Linux:
=========
- FTP:
(1) Unix server
(2) Linux server
- SFTP:
(1) Unix server
(2) Linux server
Windows:
=========
- FTP -
Does the local server send the query to remote server?
I have 2 servers,a local server connect with remote server through database link.If I execute a query at local server but only access tables in remote server,does local server send this query to remote server or all the tables at remote server will send to local server?If local server send this query to remote server,does it can execute another query while it waits the result send from remote server?
Any help would be appreciated
RegardsYes is executed on remote , and the remote can accept queries as normal see my example below
SQL> select * from v$database@prod_p;
Execution Plan
Plan hash value: 3039639316
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time
| Inst |
| 0 | SELECT STATEMENT REMOTE| | 100 | 64400 | 0 (0)| 00:00:0
1 | |
| 1 | MERGE JOIN CARTESIAN | | 100 | 64400 | 0 (0)| 00:00:0
1 | |
|* 2 | FIXED TABLE FULL | X$KCCDI | 1 | 582 | 0 (0)| 00:00:0
1 | RPRD |
| 3 | BUFFER SORT | | 100 | 6200 | 0 (0)| 00:00:0
1 | |
| 4 | FIXED TABLE FULL | X$KCCDI2 | 100 | 6200 | 0 (0)| 00:00:0
1 | RPRD |
Predicate Information (identified by operation id):
2 - filter("DI"."INST_ID"=USERENV('INSTANCE'))
Note
- fully remote statement
Maybe you are looking for
-
All of a sudden - can't open files
Running Adobe Reader 10.1.2 (current rev) on Win 7 (latest release) Had been working fine. Now on some files (but not all) I get this error: "there was an error opening this document. The file is damaged and could not be repaired." Two comments: (1)
-
Merging columns in Table control
Hi all, Iam developing a module pool. I want that Column March to be merged.... How to do in Module pool Sorry if Iam not clear... Cheers Christina
-
Can you find the notes of your voice
I was wondering, if any of you knew if you could see the notes you were singing on garage band. I've searched and searched and I can't find anything. Is there anything?
-
MacBook pro 2011 OS Maverick slow shutdown
Shutting down my 15"MBP used to take just as much time as putitng it to sleep, about 3 seconds at most... Now it takes about 40-45 seconds to shutdown . Is this normal? I kinda liked the really short shutting down time. Very snappy. Now it's ju
-
Lost user presets after LR1.2 upgrade
Ihave my user presets stored with my gallery, but even though they're still in the old location, LR1.2 doesn't show them in the develop module. Any ideas? pj