Send the email to myself with 4 pictures for more than 100 times --- i didn't do this

one of my colleages send an email to [email protected], and cc the email to me.
and my blackberry send the email with 4 pictures in my camera folder to me and joegmail.com for more than 50 times a day.
Why does it happen? and what should i do for that. please help.

one of my colleages send an email to [email protected], and cc the email to me.
and my blackberry send the email with 4 pictures in my camera folder to me and joegmail.com for more than 50 times a day.
Why does it happen? and what should i do for that. please help.

Similar Messages

  • HT201263 Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

    Try a Reset...
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    If no joy... Try a Restore...
    1: Connect the device to your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
    From Here
    Unresponsive iPad
    http://support.apple.com/kb/TS3281

  • HT1212 My little children Majd enter the wrong passcode for more than 10 times, my iPhone automatically got reset all data was deleted. I managed to retrieve the contacts only but I'm unable to retrieve my SMS's and my photos???? Can you help me please ??

    My little children Majd entered the wrong passcode for more than 10 times, my iPhone automatically got reset all data was deleted. I managed to retrieve the contacts only but I'm unable to retrieve my SMS's and my photos???? Can you help me please ???

    Hi,
    Did you ever back up your phone on the computer?
    Did you use photo stream at all?
    May I suggest changing your passcode lock to a letters and numbers lock (if not all ready it will make your iphone more secure and a restore lock otion shouldent be needed). Then change your setting as well preventing restore after ten incorect passwords.
    kc

  • I have contacted apple for more than 5 times, but no reply

    Hi , i have renewed my iphone developer program for 99$ , But i used to get the message that "my account is expired please renew it" , later now my apps too disappeared in appstore.I have contacted apple support for more than 5 times, but no reply.What is happening.Can some one please explain please.

    "Apple will fix all these problems during a week."
    Or not.
    There are many devs who still have NO access to ANY part of the developer website.
    Apple is aware of this (a dev support person telephoned me last week) but, so far, there is no fix or work-around.
    It may be true that the developer site has access for SOME subscribers; it is NOT true that everyone is able to get resources shown as "online" on the status page -- many of us have ZERO access.
    So, when Apple says 'this week' you have to balance that with the FACT that their assessment of the current status, ie. everyone has limited access now, is wrong/untruthful.
    Anyone who doubts this should simply look at other posts in this forum -- lots of folks can't get into the site -- just an infinite loop from login to grey linen maintenance page and back.

  • My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    My Iphone 5 keeps restarting over and over. it wont stay on for more than a minute. how do I fix this?

    Contact Apple Support or an Apple Store if you have one near you. Your battery needs to run through the diagnostic test. You can also try to put the device into Recovery mode as well and rsetore the iOS software, and set up the device as new. Follow this article on Recovery Mode:
    http://support.apple.com/kb/ht1808

  • To Send the Email to Ship to Party for Shipment Notification in SMARTFORMS

    HI Gurus,
    I am having a scenario to send the EMAIL  for Shipment Notification using SMARTFORMS when processed through VT01/VT02N transaction.
    I general process, the email is going to Forwarding agent Email address. But the user wants to send the notification to Ship to Party email address.
    Is there any IMG settings to be done or should we handle using Custom Driver program.? If yes, can anyone help how to achive this.
    Your help is greatly appreciated.
    Regards,
    Yathish

    Just take a look at this where PO is discussed but should not be different from your issue
    PO as SMART Form and mail as PDF
    Scheduling Agreement as PDF in email ?
    External Email (PDF Attachment) while PO is created or Changed
    Convert PO into PDF format and send by an email to vendor
    PDF form as email attachment for purchase order
    Send PO as email attachment
    How to convert smartform output to PDF and mailing them
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292
    Regards,
    Ravi
    Note - Please mark all the helpful answers

  • TS3276 As an email is being send the mail activity indicator is showing that more than one email is being send....what is going on here? Thanks

    Question: As I send an email, the mail activity indicator is showing that more than one email is being sent! Last time it was 5 even though I was only sending one and there were no other emails in the out box! What's going on here I ponder?

    Several time in the past, similar question was asked in the forum, for example check the link and reference OSS notes mentioned in it. You can also search the forum, if you need further info on this topic.
    http://scn.sap.com/thread/3230103
    Regards,

  • I have iphone 3gs . that i erased all the contents , it going on process for more than 23 hours pls solve this

    iphone 3gs
    i erased all the contents .its going on process for more then 23 hours pls solve this
    pls pls pls pls
    thanks & regards
    ganesh

    Something has gone wrong. Force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/ht1808

  • Reports not getting generated for more than 100 records

    Hi,
    On 8.1.1.1 with BI Publisher 10.1.3.4.1, some of the Reports are not running when it has more than 100 records and throwing error.
    Below are the some of the specific errors captured in XMLP log
    EAITransport EAITransportDebug 4 00000df64e7130a4:0 2011-09-15 18:25:54 *** HTTP response Headers from Data Send request:
    HTTP/1.1 500 Internal Server Error
    Date: Thu, 15 Sep 2011 12:55:17 GMT
    Server: Oracle Containers for J2EE
    Connection: close
    Content-Type: text/xml; charset=utf-8
    Transfer-Encoding: chunked
    ObjMgrLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (soapbinding.cpp (564)) SBL-EAI-04304: Unknown part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'uploadReportDataChunk' exists in SOAP message.
    ObjMgrBusServiceLog Error 1 00000df64e7130a4:0 2011-09-15 18:25:54 (outdisp.cpp (209)) SBL-EAI-04308: Operation 'uploadReportDataChunk' of Web service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: java.io.FileNotFoundException
    Please let me know what would be the reason for this issue?
    Thanks in advance for your help.
    Thanks

    Are you using 'PublicReportService'? Check the integration for Siebel Reports 8.1.1.1 and BI Publisher 10.1.3.4.1 the port 'PublicReportService_v11' is specified. Did you import this WSDL as directed?
    i.e., export from BI Publisher http://<host>:<port>/xmlpserver/services/PublicReportService_v11?wsdl
    Not certain this is the cause but I have not got the same issue.
    Edited by: user1634268 on 27-Sep-2011 10:38 - did not read the original error correctly first time

  • Download Header using GUI_DOWNLOAD for more than 100 fields

    Hi,
    I want to download data with header from a database table using the FM 'GUI_DOWNLOAD'.
    I know that this can be achieved by
    1. Download headers first to an internal table and call FM ' GUI_DOWNLOAD" 
    2. then Download data to the same file by calling FM 'GUI_DOWNLOAD' with APPEND = 'X'
    But my database table has more than 100 fields, pls tell me how to download all the fields as header information.
    Thanks in advance.

    Hi
    This can be done using the FM GUI_DOWNLOAD.
    Store all the field names in a internal table, pass the internal table to FIELDNAMES component of the FM. This will download the internal table with headings.
    Note - To download it as excel, pass FILETYPE as 'DAT'.
    Regards,
    Vinod

  • IChat with NAT for more than one Mac?

    I am a bit confused about firewall settings for iChat AV. I have a netgear FVS328 router. Obviously to have iChat working, I first open the firewall on my mac (Tiger) for the appropriate ports. Then I defined a service on the router and a rule to open those ports. It works... however, I have an issue.
    In the router firewall setup I had to give an LAN IP Address to which packets for those specific iChat ports would be forwarded. Now, I understand this when a connexion is ignited from the Internet and (for example) you would want all HTTP trafic on port 80 to go to your web server. But here I have more than one mac behind my firewall. Moreover, they get there address by DHCP. I can't change the firewall setting each time I want to chat from a different computer!
    I tried to have a look at port triggering, but it doens't seem to exist on the netgear. But even though, I would have to specify an IP address on my LAN.
    Why is this needed since basically both iChat parties are already connected to .Mac so the connexion is made!
    I am also wondering how they manage that kind of problem in Internet cafes where they certainly do not have a fixed Internet IP address for each PC or Mac available!

    HI Alexander,
    This page shows the set up for Port Forwarding for just the login/Text chatting port.
    You may be able to repeat this for another IP address (depends on device if this is allowed).
    You also have to repaet the process for the other 22 ports
    These are all on UDP (5060, 5678, 16384-16403) The group of twenty ports at the end may have to be entered one at a time
    Port Triggering is a method on some routers and modems that has data arriving on one port Trigger the opeing of other ports. I can not see that you have it from the Pics in the link. (newer Firmware if available may have it).
    ANother option on some devices is UPnP where the ports are opened by the Application when they are needed.
    Both UPnP and Port Triggering Allow for multiple computers to use the same ports.
    Ralph
    Ralph

  • Using ONE Microsoft account for more than 100 Windows devices

    I developed an application for company customers and it is listed on the windows store now. I need to use only ONE Microsoft e-mail for so many devices for my users. How to log in on all the devices with the same e-mail instead of creating one for each
    user and for each new user?
    Ahmed Abd El-Karim

    When talking about the phone the maximum number of devices on a single account is 5. When it comes to Windows 8.1 on PCs and Tablets it's 88 but you can not use it on more than that.
    If this is intended for company deployment you can do that using sideloading by either getting a sideloading key or joining the devices to a domain or using a company certificate for Windows Phones.
    Deploying it via the Store is not a viable option there.

  • Error in running Jasper Reports for more than 100 users in stress test

    I have created a web application with Jasper reports. during the stress test, we were able to run the same report simultaneously for 100 concurrent users, after that we get the following error. I hope there is no problem in my code (correct me if i am wrong)
    We use Web Sphere
    The error we get is as follows:
    java.io.FileNotFoundException: /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper (Too many open files)
               at java.io.FileInputStream.open(Native Method)
               at java.io.FileInputStream.(FileInputStream.java:106)
               at com.wily.introscope.agent.probe.io.ManagedFileInputStream.(ManagedFileInputStream.java:89)
               at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:85)
               at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
               at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
               at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
               at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
               at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
               at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
               at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
               at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
               at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
               at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
               at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
               at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
               at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
               at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
               at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
               at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
               at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
               at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
               at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
               at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
    NESTED BY :
    net.sf.jasperreports.engine.JRException: Error loading object from file : /apps/HewittProjects/installedApps/TBIA/workforce_CUR.ear/workforceServer4.16.4.war/reports/timesheet_mgr2.jasper
               at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:92)
               at net.sf.jasperreports.engine.util.JRLoader.loadObject(JRLoader.java:64)
               at com.workforcesoftware.servlets.ReportServlet2.getCompiledReport(ReportServlet2.java:712)
               at com.workforcesoftware.servlets.ReportServlet2.doPost(ReportServlet2.java:423)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at com.ibm.ws.webcontainer.servlet.StrictServletInstance.doService(StrictServletInstance.java:110)
               at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet._service(StrictLifecycleServlet.java:174)
               at com.ibm.ws.webcontainer.servlet.ServicingServletState.service(StrictLifecycleServlet.java:333)
               at com.ibm.ws.webcontainer.servlet.StrictLifecycleServlet.service(StrictLifecycleServlet.java:116)
               at com.ibm.ws.webcontainer.servlet.ServletInstance.service(ServletInstance.java:283)
               at com.ibm.ws.webcontainer.servlet.ValidServletReferenceState.dispatch(ValidServletReferenceState.java:42)
               at com.ibm.ws.webcontainer.servlet.ServletInstanceReference.dispatch(ServletInstanceReference.java:40)
               at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:61)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1009)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:529)
               at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
               at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
               at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
               at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
               at com.ibm.ws.webcontainer.cache.invocation.CacheableInvocationContext.invoke(CacheableInvocationContext.java:120)
               at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:250)
               at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
               at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
               at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
               at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
               at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:937)
    if this really cannot find the file, then how could it run successfully for 100 users?
    Have anyone experienced this problem?
    Thanks for your help.

    ummm seems odd to have 100 users making a report.. that can be the limitation of your application..

  • Unable to send the email when ownership is assigned for a task using SharePoint

     
    When we give any permission to the user through Group and People in SharePoint then that respective user gets an auto generated email, this is working fine for me.
                            But my actual problem comes here, I have created a task list in SharePoint when I assign a task to the person then that respective person did not get auto generated email. So please do help me with a right solution.

    Hi,
    Check below link,Might be help full for you.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/55d29459-9aae-4bd0-8cc6-97424326f49f/send-email-when-ownership-is-assigned?forum=sharepointdevelopmentlegacy
    Hasan Jamal Siddiqui(MCTS,MCPD,ITIL@V3),Sharepoint and EPM Consultant,TCS
    |
    | Twitter

Maybe you are looking for