Send the mail on the based on 0019

Dear Guru,
I have to send the mail on the basis of IT0019 i don;t know how to do this kindly give me step how to do this .
I need to create the Dynamiac action also on tha base of dynamic action i have to send the amil too .
thnaks
Please search the forum. this issue was
discussed quite a few times, already.
Edited by: Suresh Datti on Aug 24, 2009 6:02 PM

Look in your Sent folder to retrieve the message you actually sent and see to whom it was addressed.

Similar Messages

How to send the form data through mail with pdf format?

forms 6i
Hi to all,
i am developed one master detail form.example is based on the dept number emp details will be displayed.here my requirment is whatever displayed on the form
the data ,these data send to mail with any format.is it possible? if is possible any one give a proper solution.
Regards,
Stevie
Edited by: 994418 on 6 May, 2013 11:15 PM

Hello,
you can create a Report that accepts the search parameters from the Forms mask and generates a PDF. You also have the option to send the report via mail.
Personally I would generate the report with a tool like as_pdf
http://technology.amis.nl/2012/04/11/generating-a-pdf-document-with-some-plsql-as_pdf_mini-as_pdf3/
Then you can send the mail using utl_mail or utl_smtp.
www.google.com/search?q=site:forums.oracle.com+utl_mail+utl_smtp
Regards
Marcus

Need to send a mail back to the user in Sender Mail adapter Scenario

Hi all,
I have a scenario where the user fills the Price form or the Article form (which is a Adobe Form).When the user clicks on the "submit" button,the form is converted into xml , gets attached to the mail and sent to PI.
Now the user sometimes attaches the pdf directly instead of submitting the form. This results in the mail being sent
with pdf as attachment.
Now my requirement is to send a mail back to the user asking them to send an xml instead of a pdf.
How can this be done ?
Kindly let me know friends.
Quick Response is appreciated.

hi Sanjay,
Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
Mickael

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

TS3899 Tried all the tips on line. Every time I try to send an e-mail, it gives me this message, "A copy has been placed in your Outbox. Sending the message content to the server failed" Any help in how to resolve would be appreciated

I went through all the steps to try to resolve getting the message in a box every time i try to send an e-mail. What next ?
Message is " A copy has been placed in your
Outbox. Sending the message content to the server failed."
Any assistance would be greatly appreciated. My internet works fine as I can send e-mails from my Yahoo account on my MAC no problem.
Address is fine etc.

How long has it been going on? I've had my yahoo mess up and if i wait a bit it resolves itself. Yahoo is doing something with their servers and it messes with your mail if your mail happens to be on one of those servers.

Problen when Sending the text file as attachment to the external mail

HI,
I am sending the text file as an attachment to a aexternal mai. mailing is going with text file attachment, but text file is empty. No information in the file is going, only empty text file is going. I am sending the code iam using. Please suggest, if I need to change any passing parameters orany other other solution.
tables: knb1,kna1,adr6,ITEMSET,bsid,TSP01.
           INTERNAL TABLES
DATA: BEGIN OF it_kna1 occurs 0,
        KUNNR LIKE KNA1-KUNNR,
        ADRNR LIKE KNA1-ADRNR,
      END OF it_kna1.
DATA: BEGIN OF it_email occurs 0,
        ADDRNUMBER LIKE ADR6-ADDRNUMBER,
        SMTP_ADDR LIKE ADR6-SMTP_ADDR,
      END OF it_email.
DATA: BEGIN OF it_bsid occurs 0,
       KUNNR LIKE BSID-KUNNR,
       BUKRS LIKE BSID-BUKRS,
     END OF it_bsid.
DATA: BEGIN OF it_final occurs 0,
        KUNNR LIKE KNA1-KUNNR,
        ADRNR LIKE ADR6-ADDRNUMBER,
        EMAIL LIKE ADR6-SMTP_ADDR,
      END OF it_final.
DATA: BEGIN OF BUFFER OCCURS 10000,
          TEXT(255) TYPE C,
        END OF BUFFER.
data:xtext type solix_tab." occurs 0 with header line."line.
data:xi_pdf type soli_tab.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE,
      OBJHEAD LIKE SOLISTI1   OCCURS 1 WITH HEADER LINE,
      OBJBIN LIKE SOLISTI1   OCCURS 0 WITH HEADER LINE,
      OBJTXT LIKE SOLISTI1   OCCURS 10 WITH HEADER LINE,
      RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE,
      DOC_CHNG LIKE SODOCCHGI1,
     PARAMS   LIKE PRI_PARAMS,
     ARPARAMS LIKE ARC_PARAMS,
     DAYS(1) TYPE N VALUE 8,
     COUNT(3) TYPE N VALUE 1,
     VALID    TYPE C,
     RECEIVER(30),
     STR(256).
data: spoolid    type tsp01-rqident,
       pdf_table like tline occurs 0 with header line,
       v_bytecount type i,
       itab_pdf like tline occurs 10 with header line,
      xi_pdf like tline occurs 0 with header line,
      xi_pdf like buffer occurs 0 with header line,
       xi_pdf_1 like xi_pdf,
       v_length(2) type p,
       html like solisti1   occurs 0 with header line,
       xi_temp      like bapiqcmime occurs 0 with header line,
       xi_mime(255) type c occurs 0 with header line.
          VARIABLES
data: g_email type adr6-smtp_addr,
      TAB_LINES LIKE SY-TABIX,
      G_FLAG(1) TYPE C.
     g_norm(1) TYPE C,
     g_shbv(1) TYPE C,
     g_merk(1) TYPE C,
     g_park(1) TYPE C,
     g_apar(1) TYPE C.
data: l_lines     type i,
      line1       type i,
      l_temp(500) type c,
      l_offset    type p,
      l_lineslen(2) type p,
      l_mimelen(2) type p,
      v_spono like tsp01-rqident,
      l_tabix       like sy-tabix.
*****VIA SELECTION-SCREEN
ENDFORM.                    " SEND_TO_SPOOL
*&      Form GET_SPOOL_ID
*&      Form CONVERT_SPOOL_TO_PDF
*&      Form SEND_MAIL
FORM SEND_MAIL .
data:l_lin like sy-tabix,
        l_lint like sy-tabix,
        it_list like abaplist occurs 0,
        l_newline(2) type x value '0D0A'.
*--Data for the status output after sending
data: user_address like sousradri1 occurs 1 with header line,
        sent_to_all like sonv-flag.
clear: reclist, reclist[],
         objtxt , objtxt[],
         objpack, objpack[],
         objbin , objbin[],
         doc_chng.
*--move list to office table objbin
*--Start of Changes to support PDF attachments - UB20030116
loop at html.
   objbin-line = html-line.
   append objbin.
   clear objbin.
endloop.
loop at xi_pdf.
   objbin-line = xi_pdf-text.
   append objbin.
   clear objbin.
endloop.
*--We may write additional text to the main document
*--For faxing this will be the cover page. Like sending from SAPoffice
*--the layout set Office-Telefax will be used.
objtxt-line = 'NOTE : Please Consider the below Headers'.
append objtxt.
clear objtxt.
objtxt-line = 'Assignment --> Purchase order number '.
append objtxt.
clear objtxt.
objtxt-line = 'Document -->   Invoice No '.
append objtxt.
clear objtxt.
objtxt-line = 'Amount In DC --> Amount Due '.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = 'Please find attached statement for this week'.
append objtxt.
clear objtxt.
objtxt-line = '                                            '.
append objtxt.
clear objtxt.
objtxt-line = 'This is an AUTO GENERATED MAIL'.
concatenate objtxt-line 'Please Do not reply to this mail' into
objtxt-line separated by ' '.
append objtxt.
clear objtxt.
describe table objtxt lines tab_lines.
read table objtxt index tab_lines.
*--Create the document which is to be sent
doc_chng-obj_name = 'List'.
doc_chng-obj_name = 'SAPRPT'.
doc_chng-obj_descr = 'Customer statement for the week'.
concatenate 'Customer statement for '
              sy-datum into
              doc_chng-obj_descr
              separated by ' '.
doc_chng-doc_size = ( tab_lines - 1 ) * 255 + strlen( objtxt ).
*--Fill the fields of the packing_list for the main document:
*--It is a text document
clear objpack-transf_bin.
*--The document needs no header (head_num = 0)
objpack-head_start = 1.
objpack-head_num = 0.
*--but it has a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type RAW
objpack-doc_type = 'RAW'.
append objpack.
*--Create the attachment (the list itself)
describe table objbin lines tab_lines.
*--Fill the fields of the packing_list for the attachment:
*--It is binary document
objpack-transf_bin = 'X'.
*--we need no header
objpack-head_start = 1.
objpack-head_num = 0.
*--but a body
objpack-body_start = 1.
objpack-body_num = tab_lines.
*--of type G_DOC_TYPE
objpack-doc_type = 'PDF'. "commented on 12/13/2007
objpack-doc_type = 'TXT'. "commented on 12/13/2007
objpack-obj_name = 'Attachment'.
objpack-obj_descr = 'Customer Statement'.
concatenate 'Customer Statement' sy-datum into objpack-obj_descr.
objpack-doc_size = tab_lines * 255.
append objpack.
reclist-receiver = g_email.
reclist-rec_type = 'U'.
reclist-com_type = 'FAX'.
append reclist.
data:xi type soli.
xi-line = 'haisdgsfsdf'.
append xi to xi_pdf.
xi-line = 'haisdfdsfd'.
append xi to xi_pdf.
xi-line = 'haisfgsdfsd'.
append xi to xi_pdf.
xi-line = 'haisdfsgfsdgg'.
append xi to xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
*xi_pdf-text = 'hai'.
*append xi_pdf.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
    EXPORTING
      ip_solitab        = xi_pdf[]
   IMPORTING
     EP_SOLIXTAB       = xtext[].
**--Send the document by calling the SAPoffice API1 module for sending
**--documents with attachments
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = doc_chng
      PUT_IN_OUTBOX              = 'X'
     COMMIT_WORK                = 'X'
    IMPORTING
      sent_to_all                = sent_to_all
    TABLES
      packing_list               = objpack
      object_header              = objhead
     contents_bin               = objbin
      contents_txt               = objtxt
      contents_hex               = xtext
      receivers                  = reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      others                     = 99.

HI,
There are lots of bugs.
Please refer this sample program to fix it.
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Best regards,
Prashant

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything.

Since switching to Firefox this week, when I click on a hyperlink in an e-mail in Outlook, I get this message, "General failure. An error occurred in sending the command to the application." It doesn't open a new window or do anything. Any work around to fix this?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner. The only way to send the reply is to close it and save as a draft. Then I can pull it up from Drafts and it has the airplane on it.

Whenever I reply to an e-mail the window comes up but without the paper airplane in the top left corner. The only way to send the reply is to close it and save as a draft. Then I can pull it up from Drafts and it has the airplane on it.

Launch Mail.
Click "New Message" in the Toolbar.
When the new message window opens up, click "View" menu in the menu bar.
Select "Show Toolbar" from the dropdown.
or
Select "Customize Toolbar from the dropdown.
When the Customize Toolbar sheet drops down, drag "Send" button
or drag "default set" into the toolbar.
Click "Done".

HR: Need to Send the Paysilp as a PDF file through Mail to Employees

Dear All ,
       Need to Send the Paysilp as a PDF file through Mail to Employees.
       can anyone please suggest any Standard Function Modules which takes the Payslip Form as input and convert it into PDF and can send it through mail to the concern employees.
      Can anyone please explain the procedure in detail.
Thanks in Advance,
Regards.

venu,
below is code which helps to generate pdf ,,,,hope u know how to use the mail sending function
data:
fm_name TYPE RS38L_FNAM, "Smart Forms: FM Name
sf_name TYPE TDSFNAME
value 'YOUR_FORM_NAME', "Smart Forms: Form Name
P_OUTPUT_OPTIONS TYPE SSFCOMPOP,
P_JOB_OUTPUT_INFO TYPE SSFCRESCL,
P_CONTROL_PARAMETERS TYPE SSFCTRLOP,
P_LANGUAGE TYPE SFLANGU value 'E',
P_E_DEVTYPE TYPE RSPOPTYPE.
data:
P_BIN_FILESIZE TYPE I,
P_BIN_FILE TYPE XSTRING,
P_OTF type table of ITCOO,
P_DOCS type table of DOCS,
P_LINES type table of TLINE,
name type string,
path type string,
fullpath type string,
filter type string,
guiobj type ref to cl_gui_frontend_services,
uact type i,
filename(128).
GET SMARTFORM FUNCTION MODULE NAME ---
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = sf_name
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
I_LANGUAGE = P_LANGUAGE
I_APPLICATION = 'SAPDEFAULT'
IMPORTING
E_DEVTYPE = P_E_DEVTYPE.
P_OUTPUT_OPTIONS-XSFCMODE = 'X'.
P_OUTPUT_OPTIONS-XSF = SPACE.
P_OUTPUT_OPTIONS-XDFCMODE = 'X'.
P_OUTPUT_OPTIONS-XDF = SPACE.
P_OUTPUT_OPTIONS-TDPRINTER = P_E_DEVTYPE.
P_CONTROL_PARAMETERS-NO_DIALOG = 'X'.
P_CONTROL_PARAMETERS-GETOTF = 'X'.
****...................................PRINTING.........................
CALL FUNCTION fm_name
EXPORTING
CONTROL_PARAMETERS = P_CONTROL_PARAMETERS
OUTPUT_OPTIONS = P_OUTPUT_OPTIONS
(....) <--- your form import parameters
IMPORTING
JOB_OUTPUT_INFO = P_JOB_OUTPUT_INFO.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
P_OTF[] = P_JOB_OUTPUT_INFO-OTFDATA.
****...................................CONVERT TO PDF...............
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
BIN_FILESIZE = P_BIN_FILESIZE
TABLES
OTF = P_OTF
DOCTAB_ARCHIVE = P_DOCS
LINES = P_LINES
EXCEPTIONS
ERR_CONV_NOT_POSSIBLE = 1
ERR_OTF_MC_NOENDMARKER = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
now you can mail the pdf.
Reward points if helpful
Regards,
jinesh

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached. Now the email does not come up. Why?

I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached. Now the email does not come up. Why?

It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
If that doesn't help, you may have better luck if you ask in the Pages forum:
Pages
When you repost, be sure to include full details about your versions so that people know what it is you're working with.
Regards.

Problem while sending the o/p of payslip report through mail

Hi ,
         I am trying to mail the output of ZHINACALC0 (copy of standard program HINCALC0 for payslip display)
        In the report code of ZHINCALC0, there is a form named xform which contanis the o/p of the employee's payslip.
CALL FUNCTION 'HR_PL_APPEND_FORM'
           EXPORTING
                imp_pernr = pernr-pernr
                imp_period = rgdir-inper                "XMS note 386560
           TABLES
                imp_form   = *xform*
           EXCEPTIONS
                OTHERS     = 0.
I am using the following function module to get the o/p from memory.
SUBMIT ZHINCALC0 EXPORTING LIST TO MEMORY AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
            LISTOBJECT = LISTOBJECT
       EXCEPTIONS
            NOT_FOUND = 1
            OTHERS     = 2.
IF SY-SUBRC <> 0.
WRITE 'Error in list_from_memory.'.
ENDIF.
after this i am using SO_NEW_DOCUMENT_ATT_SEND_API1 to send the o/p through mail.
However i am not getting the desired result as the function module LIST_FROM_MEMORY takes an o/p list as input,but this is not the case here as xform is not an o/p list. How do i send the xform into memory and then get it back. Kindly help.
Thanks and Regards,
Subhabrata.

Hi,
Please check with the following code.
TABLES: KNA1.
data for send function
DATA DOC_DATA LIKE SODOCCHGI1.
DATA OBJECT_ID LIKE SOODK.
DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
DATA RECEIVER LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
WRITE:/ KNA1-KUNNR, KNA1-ANRED.
send data internal table
CONCATENATE KNA1-KUNNR KNA1-ANRED
                         INTO OBJCONT-LINE SEPARATED BY SPACE.
APPEND OBJCONT.
ENDSELECT.
insert receiver (sap name)
REFRESH RECEIVER.
CLEAR RECEIVER.
MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
        'X'      TO RECEIVER-EXPRESS,
        'U'      TO RECEIVER-REC_TYPE.
APPEND RECEIVER.
insert mail description
WRITE 'Sending a mail through abap'
                 TO DOC_DATA-OBJ_DESCR.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_DATA              = DOC_DATA
     IMPORTING
          NEW_OBJECT_ID              = OBJECT_ID
     TABLES
          OBJECT_CONTENT             = OBJCONT
          RECEIVERS                  = RECEIVER
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.

Send a mail with the class CL_HTTP_CLIENT

hi,
i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
Thank you.
*& Report ZYTEST_TRANSFER_URL2                                        *
REPORT zytest_transfer_url2                    .
*- begin of internal data
TYPE-POOLS: swfxc, icon.
DATA: l_http_client TYPE REF TO if_http_client.
DATA: l_url TYPE string.
DATA: l_code TYPE sy-subrc.
DATA: l_code_string TYPE string.
DATA: l_message_string TYPE string.
DATA: lt_http_fields TYPE tihttpnvp.
DATA: l_http_field_wa TYPE ihttpnvp.
DATA: l_char_header(40) TYPE c.
DATA: l_body_string TYPE string.
DATA : line TYPE string.
DATA: result_tab TYPE TABLE OF string,
result_str TYPE string.
*- end of internal data
DATA: lv_contents TYPE string.
DATA: lv_location TYPE string.
*- begin of parameters
PARAMETERS: url TYPE swc_value.
PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
*- end of parameters
START-OF-SELECTION.
PERFORM main.
*& Form main
text
FORM main.
PERFORM get_contents USING lv_contents.
*- Create the HTTP-Client
l_url = url.
l_proxy_host =
l_proxy_service =
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = l_url
proxy_host = l_proxy_host
proxy_service = l_proxy_service
IMPORTING
client = l_http_client
EXCEPTIONS
argument_not_found = 1
plugin_not_active = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- send the http post
CALL METHOD l_http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- receive the result of http post
CALL METHOD l_http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- print the results
CALL METHOD l_http_client->response->get_status
    IMPORTING
      code = l_code.
IF l_code < 300.
HTTP-codes: 100 - 199 = informations
HTTP-codes: 200 - 299 = client-request successful (200 = OK)
    WRITE: / icon_green_light AS ICON.
ELSE.
HTTP-codes: 300 - 399 = redirected; further actions required
HTTP-codes: 400 - 499 = client-request incomplete
HTTP-codes: 500 - 599 = server errors
    WRITE: / icon_red_light AS ICON.
ENDIF.
*-- get the http header fields
CALL METHOD l_http_client->response->get_header_fields
    CHANGING
      fields = lt_http_fields.
LOOP AT lt_http_fields INTO l_http_field_wa.
    l_char_header = l_http_field_wa-name.
    WRITE: / l_char_header.
    l_char_header = l_http_field_wa-value.
    WRITE: l_char_header.
ENDLOOP.
WRITE: / sy-uline.
*- get the body
DATA: lv_bin_contents TYPE xstring.
lv_bin_contents = l_http_client->response->get_data( ).
PERFORM save_file USING lv_bin_contents.
ENDFORM. "main
*& Form print_string
FORM print_string USING p_string TYPE string.
REFRESH result_tab.
SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
LOOP AT result_tab INTO result_str.
    WRITE:/ result_str.
ENDLOOP.
ENDFORM. " print_string
*& Form save_file
text
FORM save_file USING lv_bin_contents.
DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
DATA: lv_file TYPE localfile.
DATA : g_file(80).
g_file = url.
DO.
    SHIFT g_file LEFT UP TO '/'.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    SHIFT g_file LEFT.
ENDDO.
SHIFT g_file RIGHT UP TO '.'.
SHIFT g_file RIGHT.
lv_file = save_file.
OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    WRITE:'SY-SUBRC :',sy-subrc.
MESSAGE i000 WITH text-014. "'File Directory not found'.
    EXIT.
ENDIF.
TRANSFER lv_bin_contents TO lv_file.
CLOSE DATASET lv_file.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE i000 WITH text-012."'Successfully downloaded to Application
server'.
    EXIT.
ENDIF.
ENDFORM. "save_file

hi,
i use this program and i would send a mail with a attachment file PDF. I try to use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 but i dont know to translate the data XSTRING to internal table.
Thank you.
*& Report ZYTEST_TRANSFER_URL2                                        *
REPORT zytest_transfer_url2                    .
*- begin of internal data
TYPE-POOLS: swfxc, icon.
DATA: l_http_client TYPE REF TO if_http_client.
DATA: l_url TYPE string.
DATA: l_code TYPE sy-subrc.
DATA: l_code_string TYPE string.
DATA: l_message_string TYPE string.
DATA: lt_http_fields TYPE tihttpnvp.
DATA: l_http_field_wa TYPE ihttpnvp.
DATA: l_char_header(40) TYPE c.
DATA: l_body_string TYPE string.
DATA : line TYPE string.
DATA: result_tab TYPE TABLE OF string,
result_str TYPE string.
*- end of internal data
DATA: lv_contents TYPE string.
DATA: lv_location TYPE string.
*- begin of parameters
PARAMETERS: url TYPE swc_value.
PARAMETERS : receiver TYPE somlreci1-receiver LOWER CASE.
*- end of parameters
START-OF-SELECTION.
PERFORM main.
*& Form main
text
FORM main.
PERFORM get_contents USING lv_contents.
*- Create the HTTP-Client
l_url = url.
l_proxy_host =
l_proxy_service =
CALL METHOD cl_http_client=>create_by_url
EXPORTING
url = l_url
proxy_host = l_proxy_host
proxy_service = l_proxy_service
IMPORTING
client = l_http_client
EXCEPTIONS
argument_not_found = 1
plugin_not_active = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*- send the http post
CALL METHOD l_http_client->send
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Send: RC=' l_code_string              "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- receive the result of http post
CALL METHOD l_http_client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2.
IF sy-subrc <> 0.
    WRITE: / icon_red_light AS ICON.
    CALL METHOD l_http_client->get_last_error
      IMPORTING
        code    = l_code
        MESSAGE = l_message_string.
    CALL METHOD l_http_client->close.
    l_code_string = l_code.
    CONCATENATE 'HTTP-Receive: RC=' l_code_string           "#EC NOTEXT
    INTO l_code_string .
    CONCATENATE l_code_string l_message_string
    INTO l_message_string SEPARATED BY space.
    PERFORM print_string USING l_message_string.
    EXIT.
ENDIF.
*- print the results
CALL METHOD l_http_client->response->get_status
    IMPORTING
      code = l_code.
IF l_code < 300.
HTTP-codes: 100 - 199 = informations
HTTP-codes: 200 - 299 = client-request successful (200 = OK)
    WRITE: / icon_green_light AS ICON.
ELSE.
HTTP-codes: 300 - 399 = redirected; further actions required
HTTP-codes: 400 - 499 = client-request incomplete
HTTP-codes: 500 - 599 = server errors
    WRITE: / icon_red_light AS ICON.
ENDIF.
*-- get the http header fields
CALL METHOD l_http_client->response->get_header_fields
    CHANGING
      fields = lt_http_fields.
LOOP AT lt_http_fields INTO l_http_field_wa.
    l_char_header = l_http_field_wa-name.
    WRITE: / l_char_header.
    l_char_header = l_http_field_wa-value.
    WRITE: l_char_header.
ENDLOOP.
WRITE: / sy-uline.
*- get the body
DATA: lv_bin_contents TYPE xstring.
lv_bin_contents = l_http_client->response->get_data( ).
PERFORM save_file USING lv_bin_contents.
ENDFORM. "main
*& Form print_string
FORM print_string USING p_string TYPE string.
REFRESH result_tab.
SPLIT p_string AT cl_abap_char_utilities=>cr_lf INTO TABLE result_tab.
LOOP AT result_tab INTO result_str.
    WRITE:/ result_str.
ENDLOOP.
ENDFORM. " print_string
*& Form save_file
text
FORM save_file USING lv_bin_contents.
DATA: save_file(1000) TYPE c VALUE '/tmp/test3.pdf'.
DATA: lv_file TYPE localfile.
DATA : g_file(80).
g_file = url.
DO.
    SHIFT g_file LEFT UP TO '/'.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    SHIFT g_file LEFT.
ENDDO.
SHIFT g_file RIGHT UP TO '.'.
SHIFT g_file RIGHT.
lv_file = save_file.
OPEN DATASET lv_file FOR OUTPUT IN BINARY MODE.
IF sy-subrc NE 0.
    WRITE:'SY-SUBRC :',sy-subrc.
MESSAGE i000 WITH text-014. "'File Directory not found'.
    EXIT.
ENDIF.
TRANSFER lv_bin_contents TO lv_file.
CLOSE DATASET lv_file.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
IF sy-subrc EQ 0.
MESSAGE i000 WITH text-012."'Successfully downloaded to Application
server'.
    EXIT.
ENDIF.
ENDFORM. "save_file

I'm trying to reset my apple ID password but forgot my security questions. Apple are sending the confirmation e-mail to the wrong address, please help?

I'm trying to reset my apple ID password but forgot my security questions. Apple are sending the confirmation e-mail to the wrong address, please help?

Hello AndrewsAFCx,
Thank you for using Apple Support Communities!
If you cannot remember your security questions for your Apple ID, I would recommend these steps outlined in the article named:
Apple ID: All about Apple ID security questions
http://support.apple.com/kb/HT5665
What should I do if I don't remember the answers to my Apple ID security questions?
Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
If you are confident you can't remember them, try one of the following:
If you have three security questions and a rescue email address
sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
If you have one security question, but don't remember your Apple ID password
contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
All the best,
Sterling

Can't send e-mails to personal e-mail account outside the company

Hello
I'm trying to use UTL_SMTP package to send e-mails to users either by pressing a button, or deployed by a trigger. I'm using procedure Send_mail to do it but encountered a problem:
if it's a company e-mail address, it works fine - although i haven't been able to put more than 2 recipients at the same time (ORA-29279: SMTP permanent error: 501 5.1.3 Invalid address). if it's a personal account, it returns error ORA-29278: SMTP transient error: 421 Service not available.
At this point, procedure's parameters are all static.
I've tried using procedure Send of UTL_MAIL package but, having also static parameters, when sending to a personal account outside the company it also returns error ORA-29278.
What am i doing wrong?
Many thanks for your replies!

I forgot to pass port 26 as a parameter in UTL_SMTP package.

Trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"

i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails.

Send the mail on the based on 0019

Similar Messages

Maybe you are looking for