Send the mail to group PL/SQL

Hi All,
I have done the code to send a mail from pl/sql using UTL_MAIL, but iam not able to send a mail from pl/sql to group(Which have n number of mail-ids).
Please help me out regarding the same.
Thanks in advance.....

Doesn't work like that I'm afraid - groups are a facility of whatever mail client you use, SMTP doesn't know anything about them. You will have to add each recipient to the mail yourself in UTL_MAIL.
Carl

Similar Messages

TS3899 My iPhone & iPad mail is locked - Press mail app, the screen starts mail, freezes and bounces back to main menu. The fault occurred whilst opening a draft email created in the 'Mail 2 Group' app. Hard reset/reset all/restore backup have no effect -

I installed the Mail 2 Group App on my iPAD, created an email which I saved to the 'Draft' folder, with something over 300 of my contacts in the bcc. On returning to this email, again in my iPad, the screen locked in mail for a few seconds and bounced bak to the main menu. This repeated on my iPhone, on which I have been carrying out my own checks - this includes deleting the Yahoo account, hard reset (red cross and two buttons), restoring a backup and Reset All in settings.
I'm stuck !!

Sending a message with that many addressees may have required more RAM than was available. You can clean up RAM as follows:
Double-press the HOME button
Kill each app by flicking its screen image up
When all apps except the Home screen are closed press HOME
Wait about 2 minutes for the shutdowns to finish
Turn the phone off (hold the SLEEP button until "slide to power off" appears, and do so)
Wait another minute
Turn the phone back on by holding the SLEEP button until an Apple logo appears
Now try to send the mail again. Note that you may have an unrelated problem if this works: Many ISPs (Yahoo included) limit the number of email recipients for a single message as a way to combat spam.

Difficulty sending e-mail to group

Attempting to send E-mail to group of approximately 12 people. Get two error messages as to why the message can't be sent: "(1) Message not sent sent SCC1203 and (2) message not sent SCC1204 followed by the name of one of the people I was attempting to send the E-mail to. In the second case I determined that I must have the incorrect E-mail address. Is there an easy way to correct the error so I can get this accomplised? Thank you foryour help.

Both error codes means there is something wrong with the email address you are sending to. Check the email addresses and look for a typo too. While it could be a wrong email address, sometimes it is something as simple as an extra period, double letter,etc.
CC

Need to send a mail to group of users when sales order saved

Hi
user requirement is send a mail to group of users when sales order is saved

hi Sanjay,
Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
Mickael

HT1277 I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it.

I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtns

Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other

How to capture the screen for sending the mail

dear sir,
How to capture the screen for sending the mail .. Is there any funtion module or anyother way ? .. How to do this .. Please tell me..
Regards,
Kumar

dear sir,
s thats my problem ?
Regards,
kumar

How do i specify the port form where i want to send the mails

i have smtp server which by default has proxy at port 25.So i want to send the mails through some other port.So how can i specify the exact port in the bean(i am using a bean to send email) so that all the mails through that port.my machine is having public ip.so what i do is Properties prop = new Properties();
prop.put("mail.smtp.host",hostname);but how do i specify the port name coz this sends the mail at port 25 by default.

prop.put("mail.smtp.port",portnumber)

Problem with the ALV after sending the mail

Good Morning Experts
I have a small issue with the ALV. I have a program, which has to sent email. In My program initially I am displaying basic list in the alv and user can navigate to secondary list also, by clicking on a contract number in the basic list.
I gave a tool button in the tool bar to the user in the basic list, to send the mail. When the user clicks on the I have to send the mail both the lists, basic list and seconday list in the mail as separate attachments.
Mail is going fine and later if the user chooses to see any contract in detail(Secondary List), that time ALV giving dump with message type X. And it is stopping some where in the ALV code
call method cl_gui_cfw=>get_subscriber_by_id
       exporting shellid = p_handle-shellid
       exceptions others = 1.
if sy-subrc = 0.
    </B>message X007 with p_handle-clsid.<B>
endif.
If anybody having an Idea, how to resolve it, please tell me.
Thanks in Advance
Praveen

Please find the code for user_command form and sending the mail. Please look into this advice me if anything wrongly I coded.
*&      Form user_command
FORM user_command USING r_ucomm LIKE sy-ucomm
                              rs_selfield TYPE slis_selfield.
IF r_ucomm EQ '&IC1' OR r_ucomm EQ 'SHOW'.
    REFRESH: it_all[],
             it_fcat1[],
             it_sort[].
    LOOP AT it_final INTO wa_final WHERE select EQ 'X' OR xblnr EQ rs_selfield-value.
      LOOP AT it_bsid INTO wa_bsid WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
        wa_all = wa_bsid.
        wa_all = wa_bsid.
        wa_all-booked = wa_bsid-dmbtr.
        IF wa_bsid-augdt IS NOT INITIAL AND wa_bsid-augbl IS NOT INITIAL.
          wa_all-paid = wa_bsid-dmbtr.
        ENDIF.
        wa_all-amtr = wa_all-booked - wa_all-paid.
        APPEND wa_all TO it_all.
        CLEAR: wa_all,
               wa_bsid.
      ENDLOOP.
      LOOP AT it_bsad INTO wa_bsad WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
        wa_all = wa_bsad.
        wa_all-booked = wa_bsad-dmbtr.
        IF wa_bsad-augdt IS NOT INITIAL AND wa_bsad-augbl IS NOT INITIAL.
          wa_all-paid = wa_bsad-dmbtr.
        ENDIF.
        wa_all-amtr = wa_all-booked - wa_all-paid.
        APPEND wa_all TO it_all.
        CLEAR: wa_all,
               wa_bsad.
      ENDLOOP.
    ENDLOOP.
    SORT it_all BY xblnr.
    PERFORM fill_fcat2.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
        i_callback_program                = sy-repid
        i_callback_top_of_page            = 'TOP_OF_PAGE'
        i_grid_title                      = 'Report to display selected contracts'
        is_layout                         = wa_layout1
        it_fieldcat                       = it_fcat1[]
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
        IT_SORT                           = it_sort[]
        i_default                         = 'X'
        i_save                            = 'A'
        is_variant                        = wa_variant
      TABLES
        t_outtab                          = it_all[]
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
CASE r_ucomm.
    WHEN 'BACK1' OR 'EXT1'.
      PERFORM exit IN PROGRAM saplslvc_fullscreen.
    WHEN '&F12' or 'CANCEL'.
      PERFORM exit IN PROGRAM saplslvc_fullscreen.
    WHEN 'MAIL'.
       PERFORM prepare_mail.
ENDCASE.
ENDFORM.                    "user_command
*&      Form prepare_mail
      text
--> p1        text
<-- p2        text
FORM prepare_mail .
DATA:
       l_lay    TYPE pri_params-paart,
       l_line TYPE pri_params-linct,
       l_cols   TYPE pri_params-linsz,
       l_val    TYPE c,
       i_spno   TYPE tsp01-rqident,
       i_lines TYPE i,
       i_bin    TYPE i,
       i_pack_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
       i_recivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
       i_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
       i_header    LIKE solisti1 OCCURS 0 WITH HEADER LINE,
       i_docdata   LIKE sodocchgi1,
       i_excel     LIKE solisti1 OCCURS 0 WITH HEADER LINE.
i_pos    type i.
TYPES:
     t_pripar TYPE pri_params,
     t_arcpar TYPE arc_params.
"Work areas
DATA:
     lw_pripar TYPE t_pripar,
     lw_arcpar TYPE t_arcpar,
     w_no_of_bytes TYPE i.
l_lay   = 'X_65_255'.
l_line = 65.
l_cols = 255.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
      in_archive_parameters = lw_arcpar
      in_parameters          = lw_pripar
      layout                 = l_lay
      line_count             = l_line
      line_size              = l_cols
      no_dialog              = 'X'
    IMPORTING
      out_archive_parameters = lw_arcpar
      out_parameters         = lw_pripar
      valid                  = l_val
    EXCEPTIONS
      archive_info_not_found = 1
      invalid_print_params   = 2
      invalid_archive_params = 3
      OTHERS                 = 4.
*l_val eq space
IF sy-subrc = 0.
    lw_pripar-prrel = space.
    lw_pripar-primm = space.
    NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
ENDIF.
DATA: ls_prnt TYPE slis_print_alv.
ls_prnt-print = ''.
ls_prnt-prnt_title = 'X'.
ls_prnt-no_coverpage = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
      i_callback_program                = sy-repid
      i_callback_top_of_page            = 'TOP_OF_PAGE'
      i_grid_title                      = 'Report to display collection pattern on Clearing Date'
      is_layout                         = wa_layout
      it_fieldcat                       = it_fcat[]
      i_callback_user_command           = 'USER_COMMAND'
      i_callback_pf_status_set          = 'PF_STATUS_SET'
   IT_SORT                           = it_sort[]
      i_default                         = 'X'
      i_save                            = 'A'
      is_variant                        = wa_variant
    TABLES
      t_outtab                          = it_final[]
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE 'Test program to generate and download as PDF'.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
i_spno = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid   = i_spno
      no_dialog     = 'X'
    IMPORTING
      pdf_bytecount = w_no_of_bytes
     pdf_spoolid   = w_pdf_spoolid
     btc_jobname   = w_jobname
     btc_jobcount = w_jobcount
    TABLES
      pdf           = it_pdf.
LOOP AT it_pdf INTO wa_pdf.
    IF w_pos = 34170.
      PERFORM attach.
    ENDIF.
    w_stuff+w_pos(134) = wa_pdf.
    ADD 134 TO w_pos.
ENDLOOP.
IF NOT ( w_stuff IS INITIAL ).
    PERFORM attach.
ENDIF.
CLEAR wa_pdf.
PERFORM fill_receivers TABLES i_recivers.
PERFORM fill_contents TABLES i_contents.
DESCRIBE TABLE i_contents LINES i_lines.
READ TABLE i_contents INDEX i_lines.
CLEAR i_pack_list-transf_bin.
i_pack_list-head_start = 1.
i_pack_list-head_num = 1.
i_pack_list-body_start = 2.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'RAW'.
APPEND i_pack_list.
CLEAR i_pack_list.
*u2022 Attachment (pdf-Attachment)
CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO w_date1 SEPARATED BY '.'.
DESCRIBE TABLE it_att LINES i_lines.
READ TABLE it_att INTO wa_att INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '0'.
i_pack_list-body_start = '1'.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'PDF'.
i_pack_list-obj_name = 'Renewal List'.
CONCATENATE 'Report to display outstanding premium' 'Executed on' w_date1 INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_descr = 'Exchange Rates uploaded to the database'.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_lines * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
REFRESH: it_pdf[].
CLEAR wa_pdf.
REFRESH: it_all[],
            it_fcat1[],
            it_sort[].
LOOP AT it_final INTO wa_final.
    LOOP AT it_bsid INTO wa_bsid WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
      wa_all = wa_bsid.
      wa_all-booked = wa_bsid-dmbtr.
      IF wa_bsid-augdt IS NOT INITIAL AND wa_bsid-augbl IS NOT INITIAL.
        wa_all-paid = wa_bsid-dmbtr.
      ENDIF.
      wa_all-amtr = wa_all-booked - wa_all-paid.
      APPEND wa_all TO it_all.
      CLEAR: wa_all,
             wa_bsid.
    ENDLOOP.
    LOOP AT it_bsad INTO wa_bsad WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
      wa_all = wa_bsad.
      wa_all-booked = wa_bsad-dmbtr.
      IF wa_bsad-augdt IS NOT INITIAL AND wa_bsad-augbl IS NOT INITIAL.
        wa_all-paid = wa_bsad-dmbtr.
      ENDIF.
      wa_all-amtr = wa_all-booked - wa_all-paid.
      APPEND wa_all TO it_all.
      CLEAR: wa_all,
             wa_bsad.
    ENDLOOP.
ENDLOOP.
   NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS lw_pripar
      ARCHIVE PARAMETERS lw_arcpar
      NO DIALOG.
ENDIF.
SORT it_all BY xblnr.
PERFORM fill_fcat2.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
      i_callback_program                = sy-repid
      i_callback_top_of_page            = 'TOP_OF_PAGE'
      i_grid_title                      = 'Report to display selected contracts'
      is_layout                         = wa_layout1
      it_fieldcat                       = it_fcat1[]
   I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
      it_sort                           = it_sort[]
      i_default                         = 'X'
      i_save                            = 'A'
      is_variant                        = wa_variant
    TABLES
      t_outtab                          = it_all[]
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
i_spno = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid   = i_spno
      no_dialog     = 'X'
    IMPORTING
      pdf_bytecount = w_no_of_bytes
     pdf_spoolid   = w_pdf_spoolid
     btc_jobname   = w_jobname
     btc_jobcount = w_jobcount
    TABLES
      pdf           = it_pdf.
LOOP AT it_pdf INTO wa_pdf.
    IF w_pos = 34170.
      PERFORM attach1.
    ENDIF.
    w_stuff+w_pos(134) = wa_pdf.
    ADD 134 TO w_pos.
ENDLOOP.
IF NOT ( w_stuff IS INITIAL ).
    PERFORM attach1.
ENDIF.
CLEAR wa_pdf.
DESCRIBE TABLE it_att LINES i_lines.
ADD 1 TO i_lines.
DESCRIBE TABLE it_att1 LINES i_bin.
READ TABLE it_att1 INTO wa_att INDEX i_bin.
DESCRIBE TABLE it_att LINES i_lines.
READ TABLE it_att INTO wa_att INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '0'.
i_pack_list-body_start = i_lines.
i_pack_list-body_num = i_bin.
i_pack_list-doc_type = 'PDF'.
i_pack_list-obj_name = 'Renewal List-Details'.
CONCATENATE 'Outstanding Premium-Details' w_date1 INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_descr = 'Exchange Rates uploaded to the database'.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_bin * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
APPEND LINES OF it_att1 to it_att.
i_docdata-obj_name = 'Renewal List'.
CONCATENATE 'Oustanding Premium' 'as on' w_date1 INTO i_docdata-obj_descr SEPARATED BY space.
CONDENSE i_docdata-obj_descr.
i_docdata-obj_langu = 'E'.
i_docdata-obj_prio = '1'.
i_docdata-no_change = 'X'.
i_docdata-sensitivty = 'F'.
i_docdata-doc_size = ( i_lines - 1 ) * 255 + STRLEN( wa_att ).
***Data for Header
i_header-line = 'Header'. APPEND i_header.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data              = i_docdata
      commit_work                = 'X'
    TABLES
      packing_list               = i_pack_list[]
      object_header              = i_header
      contents_bin               = it_att[]
      contents_txt               = i_contents[]
      receivers                  = i_recivers[]
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
IF sy-subrc <> 0.
ELSE.
    MESSAGE 'Document Sent' TYPE 'S'.
ENDIF.
ENDFORM.                    " prepare_mail
Thanks
Praveen

How to automatically send the mail without popping for send

Hi,
I am providing proper values in system parameters of report6. viz.
Desformat=pdf
Destype=mail
mode=bitmap
desname=Valid email id
I am using MS MAPI (Microsoft Outlook)
When I run the report, I get the composed mail with the pdf attachment. When I press the SEND button of the composed mail, I shall be able to send the mail.
Is there a way to SEND the mail automatically through reports?
Regds
Prakash H L

hi ,
Try running your report in batch mode, provide batch=yes on the command line for your report. This will suppress any user interaction and will mail the report without the need for the user to click on the send button of the mail composer.
Regards
Oracle Reports Team.

When MAIL adapter failed to send the mail to recever, how does it handle XI

Hi Experts,
I used dynamic mail adapter, how do we track whether the mail has been successfully received by receiver, if it is failed to send the mail by mail adapter how do we handle in XI. Please help me out.
thanks
siva

Siva:
There is one option in Mail Adapter (Receiver) "Send Delivery Status Notification". I think, it will help you to get the status. When you fill the above option, you are required to fill a recipient email id to whom, the status of the email will be emailed. From there, you can get the status. Please dig little more into this.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm

I am unable to send the mail thru my GMAIL account.

i am unable to send the mail thru my GMAIL account
below error msg is diplyed
This message could not be sent. It will remain in your Outbox until it can be sent. This message could not be sent because your account does not have a prefer

Hey there meera singh,
I would suggest that you attempt the troubleshooting steps found in the following article to help you address this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How can i get my password and security questions back? everytime i write my mail in iForgot it doesnt send the mail to my account, why? someone hacked me but i dont know how.

how can i get my password and security questions back? everytime i write my mail in iForgot it doesnt send the mail to my account, why? someone hacked me but i dont know how.
example;
my apple mail: [email protected]
and i write down the account in iForgot [email protected] but i never recieve the mail asking for the new password, why? someone hacked me and change that and the security questions, what can i do?

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

User not able to send the mail from other mail box on outlook 2007

In my outlook(2007), i am using my mail box to send the mail and receiving the mail every thing working fine, now what happened , i am adding one of my users mail box to my outlook profile,and trying to send the mail from that mail box,when ever
i am trying to send its give me the message called message undelivered and permission error. as i am full permission on that users mail box. but still getting that issue.
My lab info
Exchange server 2010 sp3
outlook 2007

HI Paul,
In exchange, you have something called Send as permission as well. Try to give send as permission to your self from the user's mailbox.
In exchange> Reciepient config> Mailboxes> user mailbox> right click> Full Send as permssion
or,
Add-ADPermission -Identity "user1" -User "[email protected]" -ExtendedRights Send-As
After you add your self in send as permission you need to wait for some time to propagate the settings or you can forcefully reset the information store services
That should solve your issue.
UMESH DEUJA MCP,MCTS,MCSA,CCNA

Failed to send the mail message error code: -49

Hi,
When sending mail outside the company (outside the domain), getting this error: Failed to send the mail message error code: -49
When sending mail internally (within the domain) successfully submitted.
I was looking for notes relating to the subject but could not find anything that helped me
I would appreciate your help,
Hilla

Hi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla.

Send the mail without opening mail form

Hello,
I want to send the report output thro' mail without opening the mail form. This is needed as the report need to be scheduled to execute at particular time. The mailid will be got from the DB.
I noticed that the mailid needs to be available in the mailer's addressbook. Thenonly report can send the mail.
Does it mean, all the mailid's available in the DB needs to be part of addressbook? I need help on this.
thanks in advance,
Regards,
Vani.

Hi,
It is not necessary to have all the mailid's available in the DB needs to be part of addressbook. If you set desname to mailTo address, that mailid is "TO" address of your mail output.
Thanks,
Puvan.

Send the mail to group PL/SQL

Similar Messages

Maybe you are looking for