Send To causes Squeal and lockup

When I Send To STP from FCS my Powerbook begins to squeal really loud and it locks-up the whole computer. Not able to force quit. Has this happened to anyone else?
-Craig
PB G4 1.25 Mac OS X (10.4.7) FC 5.1.1

It is a short that happens when the lappie is moved due to the hinge no longer being tightly held to the case.
Took the lappie apart this weekend. Had to do both base and screen as the hinge (obviously) goes into both bits.
1 of 2 things solved the problem for me (maybe both):
1 - Taking it apart and putting it back together again - screws all retightened etc so the hinge moves a lot less now.
2- putting some tape around the wires that are rubbed up against when the hinge moves.
There are 5 wires (3 small, round, 2 large and flat) that go through the hinge.
This guide gets you most of the way in:
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/take-apart-tablet-pc-1.htm
and
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/remove-lcd-screen-digitizer-1.htm
After following the guides there is a little more to do to get into the hinge, but not too much.
All in all took about 4 hours.
Make sure you record which screws came from where - there are quite a few that look very similar but only fit certain holes.
Enjoy and good luck.

Similar Messages

Picking and moving Portege M400 causes crash and lockup

I have a new problem with Portege M400 that started a few days ago.
If I pick it up or move it then it will crash or lock up. I'm wondering if anyone has any clue as to what may be causing this and what can be done?
My only guess is to replace the hard drive?
Thanks,
Greg

It is a short that happens when the lappie is moved due to the hinge no longer being tightly held to the case.
Took the lappie apart this weekend. Had to do both base and screen as the hinge (obviously) goes into both bits.
1 of 2 things solved the problem for me (maybe both):
1 - Taking it apart and putting it back together again - screws all retightened etc so the hinge moves a lot less now.
2- putting some tape around the wires that are rubbed up against when the hinge moves.
There are 5 wires (3 small, round, 2 large and flat) that go through the hinge.
This guide gets you most of the way in:
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/take-apart-tablet-pc-1.htm
and
http://www.irisvista.com/tech/laptops/Toshiba-Portege-M400/remove-lcd-screen-digitizer-1.htm
After following the guides there is a little more to do to get into the hinge, but not too much.
All in all took about 4 hours.
Make sure you record which screws came from where - there are quite a few that look very similar but only fit certain holes.
Enjoy and good luck.

Any reports of Firefox 19.0.0 causing XP to eratically causing a reboot or the system, or crashing and lockups

XP erratically, and at random, shuts down, and reboots for no apparent reason. Will run for varying lengths of time between failures. Any reports of Firefox 19.0.0 causing XP to eratically cause a reboot or the system crashing and lockups. Seems to have begun after installing Fire Fox 19.0.0

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

E-mails with attachments, mostly photos, are replicating themselves in my inbox, 100 or more at a time. What is causing this and how do I fix it?

It is an intermittent, but a regular-enough-to-be-really-annoying occurrence........when someone sends an e-mail, to which is attached a photo of some kind, or a picture document, it will replicate in my inbox, sometimes 100 or more copies at a time. I delete all of them, empty the trash, and will also go to the Yahoo web version of my e-mail and delete the offending e-mail from there and empty the trash. Sometimes worked. Now that process isn't working, and this particular e-mail just filled up my inbox with over 100 copies of itself, even after the other steps were taken. Can't get any incoming mail.
This log jam of replicated e-mails prevents incoming and new mail from reaching the inbox.
Needless to say, am not too happy about it. What is causing it, and how do I fix it, other than to go to Outlook for my e-mail client....? :0) This, coupled with the constant "not responding" each time I try to send an e-mail, delete items from the "sent" or inbox folders, is really driving me nuts. We have a crappy internet connection, and that is likely part of it, but the "not responding" is not a new thing with Thunderbird, either.
Thanks in advance for any assistance you can provide. I dislike the web version of Yahoo, and don't want to have to switch to that, as it just doesn't meet e-mail needs. Would like to get Thunderbird fixed.

I have not seen your error in either my IE or my chrome. I do note that you are using a "strict" Document Type Declaration.
You might try a transitional DTD, which should be more forgiving than the strict:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Other than that, I don't see anything particular (because I don't see the error, either) that would cause the menu to drop vertically instead of horizontally.
Beth

Can't send email to Hotmail and Yahoo ??

Hello everyone,
I tried to send email to my adress in Hotmail or yahoo and doesn't work. I have another POP address and it works perfectly. Anyone know what i have to do to send mail to Hotmail and yahoo. thank you for any reponse.
Rania+

and finally I receive the email
which I have send 2 days before , so I don't know why
it's take all this time, have you an idea about this
?What error do u get? Are u sending mail to valid addresses.
Some mail servers keep trying to send mail for invalid addressfor specified amount of time. Whereas others reject mail straigt away.
Are you using a valid mail server( sometimes mail servers may have differnt forward and reverse lookups whic may cause problem ) to send mails.

Does DVI to Video adapter send both s-video and composite simoutanesly?

Hi,
I´m wondering if you connect the DVI to Video adapter on the new MacMini (DVI to s-video+composite), does the Mini send BOTH s-video and composite at the same time?
If connected to TV and projector, I want to see both simotanesly, not neede to change something in the setup...
The both having same resolution I guess is a must!
Regards,
Pat

Yes, many think, but i´ve havnt heard anyone whoose sure?! Can´t be such a odd thing, connect a Mini to two displays at same same time...

I have an Apple MacBook Pro and when surfing the web my computer will slow to a crawl and I will have a multi-colored spinning wheel visible until my latest request is handled. What is causing this and is there a way to prevent this from occuring

I have a MacBook Pro. When surfing the web it will eventually slow to a crawl. When this occurs, there will be a small multi-colored wheel spinning until my latest command is handled. What is causing this and is there a way that I can modify or prevent this from happening? Is there a setting that will prevent this?

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

jengrz wrote:
My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
TechCrunch posted a solution today that applies to this problem, I think.
Go to: https://supportprofile.apple.com/MySupportProfile.do
Click your old iPhone and "unregister" it.
More info here:
http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

Sending email using SMTP and Java

Hi guys
I am using the following code to send an email:
private void sendEmail(String mDate, String time) {
 Date date = new Date();
 DateFormat dateFormat = DateFormat.getDateInstance(DateFormat.FULL, Locale.ENGLISH);
 // Open port to server
 try {
 smtpSocket = new Socket(SMTP_SERVER, SMTP_PORT);
 os = new DataOutputStream(smtpSocket.getOutputStream());
 is = new DataInputStream(smtpSocket.getInputStream());
 // Connection was made. Socket is ready for use.
 if(smtpSocket != null && os != null && is != null) {
 try {
 // email header
 os.writeBytes("HELO\r\n");
 // set the reply email address
 os.writeBytes("MAIL From: <[email protected]>\r\n");
 // give the address of the people that we want the email sent to
 for(int i=0; i<RECIPIENTS.length; i++) {
 os.writeBytes("RCPT To: <" + RECIPIENTS[i] + ">\r\n");
 System.out.println(RECIPIENTS);
// data header
os.writeBytes("DATA\r\n");
os.writeBytes("X-Mailer: Via Java\r\n");
os.writeBytes("DATE: " + dateFormat.format(date) + "\r\n");
os.writeBytes("From: Characterisation System Update\r\n");
os.writeBytes("Mime-Version: 1.0\r\n");
os.writeBytes("Content-Type: text/html; charset=\"ISO-8859-1\"\r\n");
//os.writeBytes("Content-Transfer-Encoding: 7bit;\r\n");
for(int i=0; i<RECIPIENTS.length; i++) {
os.writeBytes("To: <" + RECIPIENTS[i] + ">\r\n");
// get the details of the test and enter them into the message body
String message = "<HTML><BODY>" +
"\r\nThe following System has not received a data packet for at leat 1 hour:" +
"\r\n System: " + rackName +
"\r\n Time Last Pkt. Received: " + time +
"\r\n Date Last Pkt. Received: " + mDate +
"\r\n Job Number: " + jobNoDispLabel.getText() +
"\r\n Device: " + deviceDispLabel.getText() +
"\r\n Run Number: " + runNoDispLabel.getText() +
"\r\n Current Temperature: " + tempDispLabel.getText() +
"\r\n Current Module: " + moduleDispLabel.getText() +
"\r\n Current Test: " + testingDispLabel.getText() +
"\r\n This does not gurantee that the system has crashed!" +
"\r\n</BODY></HTML>";
os.writeBytes("Subject: " + rackName + " Packet Warning\r\n");
os.writeBytes(message + "\r\n");
os.writeBytes("\r\n.\r\n");
os.writeBytes("QUIT\r\n");
// Now send the email off and check the server reply.
// Was an OK is reached you are complete.
String responseline;
//DataInputStream d = new DataInputStream(is);
BufferedReader reader = new BufferedReader(new InputStreamReader(is));
while((responseline = reader.readLine())!= null) {
if(responseline.indexOf("Ok") != -1) {
break;
} catch(Exception e) {
System.out.println("Cannot send email as an error occurred.");
e.printStackTrace();
catch(Exception e) {
System.out.println("Host " + SMTP_SERVER + "unknown");
e.printStackTrace();
} finally {
// close all of the data streams
try {
if(!smtpSocket.isClosed()) {
smtpSocket.close();
smtpSocket = null;
} catch(Exception e) {
e.printStackTrace();
try {
if(os != null) {
os.close();
os = null;
} catch(Exception e) {
e.printStackTrace();
try {
if(is != null) {
is.close();
is = null;
} catch(Exception e) {
e.printStackTrace();
i have used an example on the web to help me do this, so it may look familiar!!
It works fine when i run the program in debug mode but doesn't work when i run the jar file, i was wondering if anyone could help me understand why? or give me a clue as to where to look as i have had the strange realisation that i rarely compile my code up to be used by other people!!
sad but true! Also apologies if i haven't posted adequate information, this is the first time i have posted on the forum asking for help!
Anyway help would be most appreciated and thanks in advance

Sorry, by debug mode i mean running it using netbeans 5.5 and clicking on the "run main project" icon.
Once i have cleaned and built the main project all of the files are put into the jar file. Once i have done that i double click on the jar icon
is that ok? there doesn't seem to be any errors

Brain pick on an old problem of mine (squealing and poping sound when system is under heavy loa

Firstly, my apologies if this post gets double posted as I am on a barely functional dsl connection? It get?s flaky when it rains which is only periodically for about 2 months of the year?
I was wondering if someone in the know might be able to clue me in as to any fixes for this VERY old issue of mine.
I have already searched a bit and all I found was the squeal and crash issue, mine is similar but not identical.
History:
I have been a creative card user since the first SoundBlaster came out (and jammed it into a 286 system). Well I think it was the first since I was new to computers then?
Anyway I have had an SB, SB6, SB6AWE, SB Li've, and now SB li've Audigy 2 ZS. Pretty sure I had an audigy pro card (a family member was upgrading so I grabbed theirs for cheap).
Since around the audigy series of cards I have been working on friends and family member?s (and their friends/family) on the side. Though these days I am not a happy camper.
Problem:
I am having this problem that I have now learned to li've with where when I am playing sounds (game or music) and the system gets under some type of heavy load I get LOUD squealing and popping sounds (mostly the squealing kind). The sound can be in excess of my volume settings and I tend to wear headphones (I can't believe I wasn?t deafened the first few times and occasionally recently when I forget, actually I have been having trouble understanding people lately, need to get my ears checked I guess).
Heavy load defined:-On occasion copying files from one dri've to another (usually large files in this case).
-Always when copying files over a network to or from my system.
-in few cases of a network heavy or hard dri've heavy application (lan games anyone?) ? Mostly when I am hosting.
NOTE: for the most part the card works fine in games as I usually don?t do something else while playing a game, usually.
For how long?:
This is hard for me to place. I remember wanting to upgrade to 2k when it came out but I heard from friends that had tried to upgrade that the drivers for the sb6 awe or any other creative card were garbage so I delayed upgrading to win2k till I got my first + ghz system and didn?t have much choice. I have been dealing with this since (also at the time I had an audigy or perhaps just a li've, hard to place).
Steps to solve this (not resolved yet):
I have tried several different configurations, this problem has been present on both an amd and 2 (or more) different intel chi
ps.
The problem has not been present on non-creative products under 2k (yes I had a card made by the company that creative bought out a while back), driver updates have done nothing or made it worse (though recent drivers seem to be a little better).
A while back (on the amd machine) I tried dealing with creative via e-mail and got canned responses of things I had already tried (and had noted in my request for help that I had already tried them) even as far as completely clean installs and as I mentioned different systems.
I am now using completely different hardware besides the sound card. Swapping out for other soundcards doesn?t help if they are creative cards (I even went as far as trading someone else identical cards to no avail).
I have even tried windows xp to see if that would help, nope.
The only solution to this so far has been not to use the card and for a while now I have been suggesting to friends and family to just use the internal on mobo sound instead of an add on creative card.
I have even had someone else build me a system (as apposed to my building it) just in case I was doing something weird, no help.
That and just not listening to anything when I am about to put my computer under a heavy load (and making sure to disconnect the phones just in case since sometimes it happens without sound playing, RARELY).
Current system specs:intel p4 2.66 ghz
Audigy 2 zs (platinum if memory serves, pretty sure here)
Geforce 6800gt
gig of ram
(I would have to hunt around for other details like mobo)
I have to say all this effort to get one companies hardware to work just sucks and what sucks more is I have no choice on the market, there is only one noteworthy sound card company when it comes to gaming, on the plus side there isn?t much for me to look forward to in gaming these days? I don?t like MMOs (if I can't play in on a lan and just the people on the lan I don?t care for the game much). Halflife (the reason I bought the geforce 6800 gt card) renders the world in such a way as to make me motion sick (just like all the quake games) so that was a waste of money?
The reason that there isn?t much to look forward to in gaming is because I can just disable my creative card and enable my onboard mobo sound and actually hear sound while doing stuff as apposed to garbled deafening screeching sounds that I do now when I forget to stop sound before doing something hard on the system?
Personally this is a last cry for help before I completely give up, I am already a very disenchanted customer hoping there might be some way that I can just listen to music or play games without much worry about sound (the squeals can be heard from across the room from the headsets set at a normal volume so you can imagine what that?s like when they are on my head). I have already, for the last couple of years, been steering people away from creative products in general touting their core product a failure and the people that didn?t believe I just let them sit and listen to some music and then copy a file?
Sound and music are almost more important to me than graphics btw, I have returned games for poor (in my opinion) quality sound tracks (mostly EA products) and have bought games that had good sound/music but poor graphics, heck I still play some old dos games (loom anyone).
Sorry the end there got a little ranty, so anyone have suggestions to the problem section?
One last thing: This took me a while to find and is a bonus to anyone that read all that? For some relati'vely cheap 5. headphones (all I had looked at were over $00) check out the zalman headphones. I have had mine for well over a year now and they still sound just as good as when I got them (even after the ear shattering squeals) and only cost me $50) They are sturdy too (more than I expected), I tend to break headphones within 5 months even some nice $50 stereo ones and these things are still intact. By break I mean break a wire, blow a speaker (squeals) (not literally exploded), snap the headpiece? I can't seem to see a direct link to the speakers so google zalman and headphones?

I don't know if anyone is following this or cares much but I thought I would add some info for those that like me before signing up, simply searched and found some useful tidbits. I also didn't see an option to edit my previous post as most boards I post on have that option to give you an alternati've to double posting...
My system was gigabit however I only had cat5 cable with a megabit switch. Now the switch is gigabit with a cat5e cable and a short distance from me to the hub (same system otherwise). The gigabit is onboard.
I figured I would see a bit speed boost with the new network and indeed in games I did see an improvement on large data transmitting games (American Conquest 4x4 maps in multiplayer LAN) however I expected file transfers between me and other gigabit on mobo cat5e systems would be significantly better. Instead I saw speeds only slightly better than before, around to 2 megabytes per second (using a measurement tool Netstat li've from AnalogueX) and that annoying screeching. At those speeds that might explain why the game was still on the jerky side (a full blown 4x4 map the way we play stresses all computer components but network seemed to be the bottleneck).
My solution to getting fast file transfers? Disabling my sound card by going to device manager right clicking on the Creative SB Audigy 2 ZS item and choosing disable. With an acti've file transfer (large single file rather than small files) I saw about -2 megabytes per second. Within moments of disabling the soundcard I suddenly had about 20 megabytes per second and the estimated time went from 0 minutes to almost finished...
I have to say on an aside that this just adds to my disappointment with this card (and the fact that I have seen similar poor performance in other peoples cards set up by me or not). This continues to cast a light of doubt for me and future creative products. I have to say though that the X-Fi (after fully updating drivers) seems like it *MIGHT* be worth a try? I certainly won?t drop any money into a new creative card (or recommend creative computer equipment) until I see some good proof that problems such as those that plagued this and other creative cards are gone.
Now remembering several posts I read here (and why I am even posting this), I tried disabling some of the features of my nice Creative card (through the various consoles for example the EAX console). Indeed I did see a performance boost (more on that later) as well as death to the squeals (though oddly I did hear that odd electrical interference noise that is supposed to be why onboard audio sucks) and my ears thanked me for that. As for performance my transfer rates went from -2 megabytes per second to a whopping 4-8 megabytes per second (mostly 5). I am definitely leaving those special features disabled for bandwidth intensi've games, after all they are mostly meant for movie and music enhancement (though they make some games sound nice too). I should note that the squeals, though not deafening, are present with other separations in playback, during file transfers. This isn?t much of an issue for me since win2k (and XP) lets me disable and enable my sound card at will without reboots (most of the time) and it has become habit to work around my sound card in this way already.
I know that there is a limited bandwidth on the system bus between all devices however I just have to wonder why my SB Audigy card is using up so much bandwidth when not doing jack... That and I thought that limit was much higher than 20 or so megabytes per second which has me wonder just how much this sound card is wasting (and possibly stressing) in my system when not doing anything. My guess though is the sound card is merely interfering with PCI traffic and not acti'vely using it (though I am not aware of tools to check this). This might explain why I have gotten less than stellar performance out of other hardware though I have yet to try pushing my system with the sound card off yet?
While I still can't recommend creative sound cards to customers at least I can't say that Creative doesn't make anything worth buying anymore (and I used to be a huge creative advocate). The new Zen mini player got pretty good praise (search maximum PC for the review).
Assuming this thread stays open I will add more of my hopefully useful experience with this sound card. If on the other hand it'ss closed up (since there were a few unkind comments) I should have to assume that Creative has completely turned it'ss back on me as well as my current and future customers (unless some other reason for closing is given of course). As it is now I see signs of improvement in the companies? products (which pleases me to no end) though not yet enough to justify my spending or recommendations, besides the portable device, though I have no interest in devices that don?t allow for flash memory expansion I have been asked about them on occasion.

Sending messages thru email and SMS without using XMS APIs

Hi,
I already have some working code that sends messages thru email and SMS. But currently it uses XMS APIs therefore I have a dependency on files like wdk.jar. I want to try and eliminate using the XMS APIs and only use soap to send these messages. I was wondering if there is some documentation available on how I can do this. Also if there a lot of code that needs to be written to do that.
I primarily want a very simple application that sends only string messages and reduce my dependencies.
I would really appreciate all the advice.
Thanks,
Sonali Nath

Hi,
You may refer to the following links to check if they help:
Sending SCCM Status Messages from MDT Scripts.
Send SCCM task sequence email report
Regards,
Sabrina

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

I was on a free dictionary website and it asked me if it would like to send me push notifications and i allowed it but i don't want them anymore...how do i get rid of that? I'm using my macbook pro by the way

Go to the site and look for an unsubscribe link. Or, contact the site and ask them to stop.

I am using an iPad with Apple TV and airplay with a projector in my classroom. The mirroring cuts out and back on several times during use. Any suggestions on what's causing it and how to fix it?

I am using My iPad with Apple TV, Airplay and projector in my classroom. The projector screens blanks out and back on several times during a presentation. It seems like a problem with connection but I'm not sure as it comes back on after a few seconds. Any idea of what is causing this and how it can fixed?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

I have an apple id but i have forgotten my password and i cant reset my password to my email because i longer know have that password to that email i was wondering if there was a way we could send my apple id and password to a brand new email account

i have an apple id that i can't get into because i have forgotten the password and the email that i had it connect to is no longer working because i no longer know the password so i was wondering if there was a way i could send my apple id and password to an new email account thart i now have

Go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

When I click on the "import all" button when downloading my photos I get a message that states that the format is unrecognizable. What caused this and how do I change it so I can import my photos?

I am trying to download photos from my digital camera. I have done this many times before with this same camera; however this time when I click the "import all" button I get a message that states that the format is unrecognizable. It doesn't specify what the format is.
What is causing this and how do I correct it? Any ideas would be greatly appreciated!
Thank you!
Aimee

Make a temporary, backup copy of the library and try the following:
launch iPhoto with the Command+Option keys held down and rebuild the library.
select the options identified in the screenshot.
Click to view full size
Launch iPhoto and try importing again.
OT

Send To causes Squeal and lockup

Similar Messages

Maybe you are looking for