Send to: Changing default texts/system-url for emails

Hi, I would like to change the default texts for emails send by "Send to". The specific problem is, that the system-url in the link to the object isn't correct.
for example: http://testsystem... instead of http://productive...
Have you got any ideas where to change this?
Thanks a lot
Sandra

Hi Sandra,
I don't know where you have this problem but if this when you create a room you should modify in:
System Administration-System Configuration-Collaboration- Room Backend Properties- you can generate the access url to collaboration room.
Patricio.

Similar Messages

Changing the default logical system names for adaptive RFC models

Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.

Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich

Changing Default logical system names of a model.

Hi
    How could i change the
     Default logical system name for model instances:
     Default logical syatem name for RFC metadata:
    values for existing model? without recreating the model.
     Thanx

Hi shah kond,
you can change rfc destinations of model in 2 differnet ways.
firs one: right clcik on project
          from the context menu select propeties
          it will open a dialogbox from that select dynpro references then click on jco references tab
by using add and remove buttons u can add and remove joc destnations
2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
hope this will use ful for u
Regards
Naidu

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

Changing default text color for new emails

My wife has decided that she wants all of her out going messages to be in a blue 18 pt font. I figured out how to get the 18 pt font, but can't find how to chaneg the default text color. Any help would be appreciated.

Changing your SIP domain will effect both Lync 2010 and 2013 (it happens at the top level).
Here is some information on doing this: http://blog.insidelync.com/2013/06/anatomy-of-a-sip-domain-change/
I'd suggest getting it right prior to adding in your Lync 2013 topology, just for the sake of simplicity.
Rather than changing your SIP domain, is simply adding an additional SIP domain an option?
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Can you change default text reader from TextEdit?

I use Bean, a great (and free) text editor, and would like to have it open automatically as my default text editor when I click on a text file, rather then TextEdit. Can that be set somewhere? Thanks.

If it were in Preference in addition to telling the system the application to use you would also have to tell which files you wish to make the change on. This way with File Information pane open, the system alreay knows where to make the change.
Beside the information about default application is maintained in the metadata for the file and not in preference for Finder. If you think about it that way, you can see that there is some logic to the way Apple does it.
You are welcome. Glad I could help. Thanks for the star.
Allam

How to change default texts in OSX dialogue windows?

I'd like to change some of the texts that appear in the OSX dialogue boxes.
One example: I have set my Mac up to ask for the password after N minutes of sleep. I would like to change the text in the box/window that appears when the Mac is woken up and where you are told to submit your ID and password (I'm sorry that I am not sure what exactly it says in English because I'm using another language).
The closest thing to what I need I have come across is this:
sudo defaults write /Library/Preferences/com.apple.loginwindow LoginwindowText 'Hands off'
However, this applies only to the first login window you see after you have started the computer. I'd like to change other default texts as well.
The default texts in different languages must be stored somewhere. How do I find them and how do I chage them? Any advice would be appreciated.

It seems like the same problem as would be faced by someone localizing the OS, so perhaps there would be something useful here:
http://developer.apple.com/internationalization/

How to change default text in Tray UI ?

Hi:
The default text at the icon to collapse and expand tray are "Collapse Tray" and "Expand Tray" I want to change it, How can I do it?
I read the API and I can't find it. If you see the API's page it will be the icon's text next to "Item 1".
Thanks a lot for your time on this thread.
Rocío.

Hi Armin, thanks for your answer.
So, it's not possible to custom HTML renderer....am I right?
Thanks again.
Rocío.

Default logical system names for application and metadata in models.

hi,
I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
how do we change them and re import after changing? in abap we cant change our code in test and prod systems right so how is it in web dynpro java ?
thanks

Hi Jeschael,
thanks for the reponse.
When I create the model, I give the default logical system names and on the next screen I give the
ip address of the backend system, client , login, password etc
Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
thanks
B

Change default text in adf faces component in Webcenter Spaces

Hi ,
Here is the link that I found to change the default text in adf faces component. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/49-skin-component-labels-169191.pdf
Scenario is simple :
Taskflow "ABC" is used in webcenter space through imported Library in spaces App. Taskflow "ABC" have the pageFragment "view1" and fragment has a adf table on that page. I was trying to change the "Detach" text using below code in above provided instruction.
{ "af_panelCollection.LABEL_DETACH_TABLE_DLG", "Any name for the Detachable Table" },
{ "af_panelCollection.LABEL_DETACH_TREE_TABLE_DLG", "Any name for the Detachable Tree Table" }
Query/Problem : I did change in the trinidad-skins.xml of DesignWCSpaces app ... redeployed the war.. But the text didn't changed. The above steps worked fine for individual ADF application ... SO what's wrong with implementation on Webcenter Spaces ?

Hi.
Basically you have to do the following:
Create an ADF JAR Library including your Skin (JS, Images, CSS Skin, Resources Bundles and trinidad-skins.xml)
Deploy the ADF JAR Library as Shared-lib in WebLogic.
Include in your weblogic.xml of the WebCenter Portal (Formerly Spaces) deployment via DesignWebCenterSpaces or the new extension the reference to the shared-lib.
Restart WebCenter Portal (Spaces). When starting WebCenter Portal (Spaces) it looks inside of the Classpath for all trinidad-skins.xml files.
Setup your custom skin for a Space and test.
If the Skin is not selectable in the Administration Console then register your new skin downloading/updating/uploading from the MDS the generic-site-resources.xml file of the default scope GUID.
If you still have issues then may I priorize a Blog entry explaining this .
Regards.

Default text in description for a task

Morning,
I was wondering if it is possible within a task or appointment if a value is chosen from a pick list it would then load default text in a description field.
For example i am hoping for users to choose a value then default text would appear in the description field asking questions for the users and then this information could be passed onto a department via workflow as well as the information stored on the system.
Any assistance would be greatly appreciated.

It is possible to set up workflow so that every time the Type field is updated the Description field is populated with the value in the Type field. The workflow condition would be PRE('<Type>') <> [<Type>] and the action would be update values and set the Description field to FieldValue('<Type>'

How to change Default editor in Linux for PL/SQL Programming

Deare friends ,
I am using oracle 8i (8.1.6) on RedHat Linux 7.2 , But i donot know how to change default editor for modify editor on sql prompt say ex:-
In winodow
SQL> ED
it open nope pad to modify sql and pl/sql statement
while in linux
SLQ > ED
it open one editor but it is not easy to work and i want to change that editor so could you tell me how to chane editor i want to use vi editor .
if any boyd know reply me on :-
[email protected]
or on this forum
Thanking you in advance
Piyush Patel

Either manually do a 'define editor=vi' when you log in through sql*plus, or put that in the glogin.sql in $ORACLEHOME/sqlplus/admin or put that in a login.sql in the directory you run sqlplus from.

How to Change default text in Multi-Selection Table Bar

Hi,
I would like to change the default text "Select Object" on the Multi-selection Table Bar.
I tried adding the following in my resultsCO but I'm getting errors:
tableBean.setTableSelectionText("<newText>");
Error(25,34): invalid method declaration; return type required
Error(25,35): illegal start of type
Error(25,3): missing method body, or declare as abstract
What am I missing?
Thanks much.

I got it to work with the following:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OATableBean table = (OATableBean)webBean;
// Set the install-base specific "control bar" select text:
// "Select Item(s)…"
table.setTableSelectionText("Select Item(s)...");
}

Can I change default text size in CS5

Every new document seems to open with a default text size of 12 pt. (or 0.167 inches). I am a sign maker and my typical artboard size is often 120" x 120" or larger.
Is there a way to change the default text size so that new documents open with a text size of, say, 1 inch (or 3 inches, etc)?
Any help would be greatly appreciated.
thanks,
Duncan McLean

Open the New Document Profile that you use the most (from HD>Users><yourname>>Library>Application Support>Adobe>Adobe Illustrator CS5>en_US>New Document Profiles) or the equivalent path in Windows. Then go to Window>Type>Character Styles and double click on the [Normal Character Style] at the top of the list and modify the settings there to your liking. Save the document and restart AI.
Here's a view

To change default backup file permission for dsconf

Hi,
I was wondering if it is possible and ADVISABLE to change the default backup file permission for dsconf util. We're having two OS users, once which runs the script, and other which runs the dsconf. We're not allowed to schedule crontab from the second user profile. Hence, the user which runs the script will not be able to purge the old backup files as part of the backup process.
-rw------- 1 tty gis 32M Dec 15 22:00 usersConfig-15-12-11.ldif
Any thoughts if anyone has come across such issue.
Thanks, JPrince

So if I understand correctly, there is one user which creates the backups, and can run cron scripts. A second user runs some script on the backup, but doesn't have permissions to remove the backup once the script finishes.
Changing the permissions on the file itself is not enough, you have to have write permission on the directory which contains it as well. This doesn't sound (to me) like something you really want to do.
What I would suggest thinking about is having directory or file somewhere that both users can read/write.
When the script finishes processing, write the name of the backup into that file (or create an empty file in the directory with the same name as the backup).
Run a cron script from the first user (the one that creates the backups) which checks for names of processed files. If it finds any, it removes those backups, and the names from the file/directory.

Send to: Changing default texts/system-url for emails

Similar Messages

Maybe you are looking for