Send To iView giving Error AttachmentList cannot be found/created

Hi Everybody
Currently I am on SAP EP 7.0 SP17.
I am facing the following problem
I created a Send To iView so that users can send Mails from Portal.
It is working fine if I use Http Protocol
If I use Https protocol in the URL it is throwing the Error AttachmentList cannot be found/created.
For some landscape Info
I have a Exchange Frontend server and Exchange Backend Server.
please help me out as this is the Production issue Now
Thank you
Regards
Krishna kanth

Hi
Its been a very Long time.
The Issue is resolved. I had to restart my production server.
Also please check your Connection to User Database ( Just verify it)
Thank you
Regards
Krishna

Similar Messages

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

JHeadStart Security problem-error page cannot be found- role based security

JHeadStart Security problem-error page cannot be found- role based security
Good morning! How are you? I would need some help in a jheadstart 10.1.3.2 security case and I was wondering if you could give me a hand to go on. I create the Model project with tables of oe schema. Then in JHeadStart to perform security I follow the following steps: In ViewController/WEB-INF/web.xml – properties I do the following: login configuration: http basic authentication rfc 7617: realm:jazn.com
Security roles : I define two roles: customer and administrator , Security Constraints: web_resources: All_pages, Url Patterns: faces/*. Then in Tools/Embedded OC4J Preferences/Global/Authentication JAZN/Realms/jazn.com/users: I define two users c1, password c1 and a1,password a1, roles/member users/ I attribute the roles to the relevant users c1—customer and a1—administrator. Then in application definition editor on service level I define security/use role based authorization=true , authorization type: JAAS and when access denied go to next group=true. On group level e.g.: ProductInformation: Authorization/Authorized Roles Permissions: administrator.On item level : Orders/Items/OrderTotal/Operations/Update Allowed: #{jhsUserRoles['administrator']},Then I generate the pages (run the jag) . The generation is completed successfully but when I run the View Controller project a “the website declined to show this webpage…(page cannot be found)’ is displayed. What should I do? I would appreciate it if you would help me on this issue! Thank you very much.

Thand you very much for your reply! Unfortunately there is a specific restriction-convention in the project I work in. I am supposed to perform role based security with my own tables and no by the jheadstart’s ones. Could you find out what is my fault with the steps I follow trying to perform the process?
To remind you my steps I paste the following again:
JHeadStart Security problem-error page cannot be found- role based security
Good morning! How are you? I would need some help in a jheadstart 10.1.3.2 security case and I was wondering if you could give me a hand to go on. I create the Model project with tables of oe schema. Then in JHeadStart to perform security I follow the following steps: In ViewController/WEB-INF/web.xml – properties I do the following: login configuration: http basic authentication rfc 7617: realm:jazn.com
Security roles : I define two roles: customer and administrator , Security Constraints: web_resources: All_pages, Url Patterns: faces/*. Then in Tools/Embedded OC4J Preferences/Global/Authentication JAZN/Realms/jazn.com/users: I define two users c1, password c1 and a1,password a1, roles/member users/ I attribute the roles to the relevant users c1—customer and a1—administrator. Then in application definition editor on service level I define security/use role based authorization=true , authorization type: JAAS and when access denied go to next group=true. On group level e.g.: ProductInformation: Authorization/Authorized Roles Permissions: administrator.On item level : Orders/Items/OrderTotal/Operations/Update Allowed: #{jhsUserRoles['administrator']},Then I generate the pages (run the jag) . The generation is completed successfully but when I run the View Controller project a “the website declined to show this webpage…(page cannot be found)’ is displayed. What should I do? I would appreciate it if you would help me on this issue! Thank you very much.

SSRS SharePoint Integrated error, User cannot be found

We currently have setup an SSRS in SharePoint 2013 integrated mode. We got the error message below when we removed a user from the Groups and Members. I have found from searching the web that this is a bug that happens whenever the report creator has been
removed or deleted from the SharePoint site
System.Web.Services.Protocols.SoapException: Report Server has encountered a SharePoint error. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException:
User cannot be found.
Since we are already using SharePoint 2013, I would have thought that this bug has already been fixed. I think it is pretty common to have the report creators leave the company and as a security to remove their profiles from the SharePoint site. Microsoft,
is there a solution to this?

Hi Blusil,
Just as you said, this issue always occurred when user(s) missing or removed from the site that either authored or modified the report(s). As per my understanding, the solution of the issue is adding the user accounts back to the site or change the user
to another one in the site.
If the user had left the company, we can refer to the second solution that override the owner field using PowerShell for that report:
http://alexbrassington.com/2013/11/07/changing-modified-and-created-details-in-sharepoint/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSIS is not running in 64 bit production server - Error Class cannot be found while running from c# web application

Full error message:
An Integration Services class cannot be found. Make sure that Integration Services is correctly installed on the computer that is running the application. Also, make sure that the 64-bit version of Integration Services is installed if you are running a 64-bit
application
I have developed SSIS package in my development machine where the OS is 64 bit and sql server 2012 is installed.
The package has excel source and oledb destination. Excel files can be both .xls and .xlsx format. Since i want to run both xls and xlsx format i have installed
32 bit Microsoft Acess database engine form the below link, then both xls and xlsx format worked.
.xls - 32 bit
.xlsx - 32 bit and 64 bit is available. So in common i have to run it in 32 bit.
I have set Run64BitRuntime to False and ran package. it is working fine. I cannot set Run64BitRuntime to True and run the packages. Because i have office products installed on my machine which is 32 bit. if try to install 64 bit Microsoft Acess
database engine redistributable pacakage from below link , it is throwing error saying that, already office 32 bit product is installed so uninstall 32 bit product and install 64 bit.
Excel connection string is Ace database engine only. everything works fine.
microsoftcom/en-us/download/details.aspx?id=13255
Now i am trying to invoke package from c# code by using Microsoft.SqlServer.ManagedDTS.dll and it is also working fine in my dev machine.
When i deploy the web application in production am getting the error while invoking package. the full error message is posted in 1st line of this thread.
Then i tried to execute the package in production server by using dtexec utility, it is working fine. I tried both 32 bit and 64 bit dtexec utility by going to specific path (program files(x86) and Program files) via command prompt.
It is all working fine. So the error coming when i invoke from web application. My guess is ManagedDTS causing problem.
Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll
or is it because of any other problem. i have checked below links, still problem not resolved.
social.msdn.microsoftcom/Forums/sqlserver/en-US/491384d2-02f7-4178-a1c3-bcbd58e57fce/an-integration-services-class-cannot-be-found-make-sure-that-integration-services-is-correctly?forum=sqlintegrationservices
forums.aspnet/t/1990417.aspx?Issue+deploying+SSIS+Package+in+production+web+server

1) "I have set Run64BitRuntime to False and ran package" -> this is not valid outside of your development environment, it is made for simulation purposes as all the dev tools are 32 Bit
2) "Where can i find 64 bit Microsoft.SqlServer.ManagedDTS.dll " is basically SSIS. It is quite possibly the culprit. I am inclined to think you attempt to run the package where there no SSIS installed.
Arthur
MyBlog
Twitter

The cryptic error - element cannot be found in a collection ?

I have encountered this error in the script task a few times. The causes are - Variable is present in code, but not added to task list OR, you try to create a DataColumn with the wrong column name, OR the variable in the task list has been deleted.
When you make such mistakes, you get the cryptic error -
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not there.
---> System.Runtime.InteropServices.COMException (0xC0010009): The element cannot be found in a collection. This error happens when you try to retrieve an element from a collection on a container during execution of the package and the element is not
there.
How do I guess the EXACT source of the problem from this cryptic error message ?
I am sure that I am a beginner compared to the developers who made SSIS. But, what amazes me is that they could not even show which element was missing ? As a result, the developer has to look at all the variables in his code and see if they are in the list.
Is this error so cryptic in even SSIS 2012 ? This should not have been too hard for the highly paid programmers to figure out.

The thing is the variables are stored as an array or to be precise a collection so the variable name is the key and as you might have noticed in other programming languages that the values are not displayed in the error or the stack trace so according to
the base engine the variable name is just a string value and nothing more so it will throw the error
"The element cannot be found in a collection"
instead of showing which which variable.
Surender Singh Bhadauria
My Blog

Error Message:"Cannot find or create the font 'WP-MathA'. Some characters may not display or print correctly." Who can help me solve this problem?

Some of the pdf files I work with (receive) come up with a comment: “Cannot find or create the font ‘WP-MathA’. Some characters may not display or print correctly.” Who can help me solve this problem?
Thank you in advance for your time.
Marlen

Hello Anubha,
I am having a similar problem on my machine. I was using Word 2008 and I created a PDF inside Word.
I am opening the file on the system itself and I am running Windows 8.1. I am using Version 11 of Reader.
When the PDF I created (my resume) attempts to open, it says: cannot find or create the file Times, Bold. Some characters may not display or print correctly.
However, the entire Reader keeps freezing and will not allow me to open or test print the document. Also, it is not displaying any of the Bold Times New Roman Print. Can you please help? Thanks.

Itunes library.itl file cannot be found/created.

So... every time I try to open iTunes, this message pops out:
"The iTunes Library.itl file cannot be found or created. the default location for this file is in the 'iTunes' folder in the 'Music' folder."
I tried looking for the itl file, but i can't find it.
What should I do?
Can someone please help me???

I found the answer in the apple knowledge base: How to open an alternate iTunes Library file or create a new one.
Still, a simple upgrade has caused hours of computer work (installing, re-installing, re-starting, reading articles, trying other things).
SO FRUSTRATING, and still not back to "normal."

XML Report output giving error "word cannot open the file because....

Hi All,
Greetings!
I have a standard report, 'Payables Posted Invoice Register".
The report was going in to warning beacuse of some Invalid characters in the Data.
I corrected the invalid characters and then ran the report ; it completed fine.
But now when I try to open the report output, the output is not getting open but its allowing me to save the file.
When I save it on my local machine and try to open it, I am getting an error as "word cannot open the file because it is larger than 512 megabytes".
The document size showing is 664MB when I saved it on my machine. And the output type of the report is RTF and not PDF.
Can anybody please help?
Thanks,
Sachin

not sure, if the Microsoft word has limitation of file size.

Giving error of insufficient privileges while creating triggers

Hi all,
I am facing the problem of insuffcient privilege on base tables while creating triggers. I have three schemas say A, B, C in my database.
Base tables are in schema A. I have given all the grants on base table to schema B and C.
grant all on base_table_name to B;
grant all on base_table_name to C;
I have created synonym also on that base table.
And i m creating triggers in schema B.
When i execute the query for trigger the it giving following error :
+AFTER INSERT OR UPDATE OR DELETE ON BASE_TBALE_NAME *+
ERROR at line 3:
ORA-01031: insufficient privileges
even i have checked in dba_tab_privs for that base_table.....it is showing all the grants to USER B and C.
What should I do now?
please suggest.......
Regards,
Andy.

Hi karan,
You are right. While searching docs i got the solution of my problem.
Privileges Required to Use Triggers
To create a trigger in your schema:
+•You must have the CREATE TRIGGER system privilege+
+•One of the following must be true:+
+◦You own the table specified in the triggering statement+
+◦You have the ALTER privilege for the table specified in the triggering statement+
+◦You have the ALTER ANY TABLE system privilege+
To create a trigger in another schema, or to reference a table in another schema from a trigger in your schema:
+•You must have the CREATE ANY TRIGGER system privilege.+
+•You must have the EXECUTE privilege on the referenced subprograms or packages.+
To create a trigger on the database, you must have the ADMINISTER DATABASE TRIGGER privilege. If this privilege is later revoked, you can drop the trigger but not alter it.
The object privileges to the schema objects referenced in the trigger body must be granted to the trigger owner explicitly (not through a role). The statements in the trigger body operate under the privilege domain of the trigger owner, not the privilege domain of the user issuing the triggering statement (this is similar to the privilege model for stored subprograms).
I have to grant only create any trigger to user.
Problem solved.
Thanks to all for ur help.
Regards,
Andy.

Solaris 7 sparc 64 bit jdk giving error:referenced symbol not found

hi
I have installed jdk 5.0 on solaris 7 sparc for 64 bit support
I am getting this error while giving java, plz help me
dl failure on line 717Error: failed /els/install/jdk1.5.0_04/jre/lib/sparcv9/server/libjvm.so, because ld.so.1: java: fatal: relocation error: file /els/install/jdk1.5.0_04/jre/lib/sparcv9/server/libjvm.so: symbol __1c2n6FL_pv_: referenced symbol not found

I got this problem too.
have fixed this?
whether should we patch the os first?

Itunes Error song cannot be found would you like to locate it?

I downloaded Itunes 10 on windows vista last Saturday, but after I synched my Iphone 3gs I noticed that none of my 1000 songs where on my Iphone as well as my 55 Ringtones bought from myxer.com. When I click on the song/ringtone it comes up with an error stating "The song "such and such" could not be used because the original location file could not be found. Would you like to locate it?" I have tried many times to locate and I upload it to my itunes library but as soon as I shut Itunes out it does it again. No matter what type of music it is whether it be downloaded, cds or bought from the store this error appears everytime with every song and ringtone. I have spent over 4 hours on the phone with apple techs with no results. This is very ridiculous to have to import all my cds and songs that are saved onto my computer over and over again. The apple techs have had me uninstall and re-install Itunes twice, and had me search for all different types of files for my Itunes to find them with no luck. Please help!!!!!!

Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
tt2

Error "Page cannot be found"

I have a page with 8 tabs on it. I can successfully get the requested pages to return for about 3 or 4 of the tabs, but by the 4th or 5th one, I get the above message. I have to move off the page and come back to it to get the tabs to work again. It does not seem to be a particular page that begins the error, or a particular order of clicking on the tabs. Some of the tab pages pull values from other page items. Is this a known issue or do I have a configuration problem?

There is a known bug that will cause this error if you're running on Oracle 10.2.0.3.0. However, it generally fails on the same page for a single session and will continue to fail until the SGA is flushed. The page that causes the problem could however change from one session to another. If this doesn't sound like your situation, then this bug wouldn't apply. If it does, try flushing the SGA with
alter system flush shared_pool;
Earl

Error - "Group cannot be found" after rename user group

Hi,
I got the error message below after I clicked at 'edit' button in the "People and Groups" page (/_layouts/15/groups.aspx). Before I get this error message, I renamed the group name. It seems like it was looking for the old name when I clicked at
'edit' button. However, I can still access the Group Setting page by go to the group page -> settings -> Group Settings. Once I renamed the group name back to what it was. I can click at the 'edit' button without any error.
Can someone please explain to me about this issue?
Thank you,

Hi,
This is what I have in the log
Correlation ID: 383abd9c-5f4c-707e-c171-bb7bd63f8d2e Date and Time: 9/29/2014 2:50:53 PM
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Parent No
a415c502-5c7f-494d-b58e-f8deec07d9b8
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Logging Correlation Data
xmnv Medium
Name=Timer Job MySite-Instantiation-Interactive-Request-Queue
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Portal Server
Personal Site Instantiation aj58q
Medium <LogTimerJobInstance> Starting timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80. Function: MySiteInstantiationJob:Execute
383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Portal Server
Personal Site Instantiation aj58r
Medium <LogTimerJobInstance> Finishing on timer My Site Instantiation Interactive Request Queue (e94a6caa-b0f5-4897-b489-585ca50c7803) for web application: SharePoint2013Intranet - 80. Function:
MySiteInstantiationJob:Execute 383abd9c-8f41-707e-7d8c-e722a2386e1c
09/29/2014 14:50:53.08 OWSTIMER.EXE (0x3C3C)
0x16F4
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c
b4ly Medium
Leaving Monitored Scope (Timer Job MySite-Instantiation-Interactive-Request-Queue). Execution Time=3.75969571551692
383abd9c-8f41-707e-7d8c-e722a2386e1c

DATAEXPORT to sql server is giving error

Hi,
I am using DATAEXPORT to export data to SQL tables but its giving error:
MY TABLE:
USE SBC;
Create table TEST
     Period nchar(20),
     HSP_Rates nchar(20),
     Years nchar(10),
     Currency nchar(5),
     Scenario nchar(20),
     ICP nchar(20),
     [Co.] nchar(20),
     Version nchar(20),
     Product nchar(20),
     Entity nchar(30),
Account nchar(50),
     Data numeric(18, 5)
Created this order based on export taken on file
**My Script:**
SET DATAEXPORTOPTIONS
     DataExportLevel "ALL";
     DATAEXPORTCOLFORMAT ON;
     DataExportOverwriteFile ON;
     DataExportDecimal 4;
DATAEXPORTCOND ("HSP_InputValue" <> #MISSING And "HSP_InputValue" <> 0);
FIX (@REMOVE(@RELATIVE ("Balance_Sheet",0),"CY_Earnings"),"Per7","HSP_InputValue","FY12","Local","MY12 Budget", @RELATIVE ("ICP Top",0),@RELATIVE ("Co Total",0),Working,@RELATIVE (PODS,0),@RELATIVE ("Entity",0));
/*DATAEXPORT "File" "," "D:\Test.txt"*/
DATAEXPORT "DSN" "TEST" "Test" "admin" "XXXXXX";
ENDFIX;
Output when exported to File:
"Per7"
"HSP_InputValue","FY12","Local","MY12 Budget","No IC","Co 100","Working","ALLEZ","100-1050","Subs_Cash",500000.046
"HSP_InputValue","FY12","Local","MY12 Budget","No IC","Co 100","Working","AirFreight","100-1050","Subs_Cash",534324.370
ERROR IN LOGS:
[Fri Feb 03 01:10:20 2012]Local/SBC///15796/Info(1013210)
User [admin@Native Directory] set active on database [SBC]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1013091)
Received Command [Calculate] from user [admin@Native Directory]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1013167)
Received Command [Calculate] from user [admin@Native Directory] using [Test.csc]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021004)
Connection String is generated
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021041)
Connection String is [DSN=SBC;UID=...;PWD=...;]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021000)
Connection With SQL Database Server is Established
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021013)
ODBC Layer Error: [21S01] ==> [[Microsoft][ODBC SQL Server Driver][SQL Server]Column name or number of supplied values does not match table definition.]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021014)
ODBC Layer Error: Native Error code [213]
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Error(1012085)
Unable to export data to SQL table [Test]. Check the Essbase server log and the system console to determine the cause of the problem.
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1021002)
SQL Connection is Freed
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Warning(1080014)
Transaction [ 0xb0006( 0x4f2b885c.0xd4e40 ) ] aborted due to status [1012085].
[Fri Feb 03 01:10:20 2012]Local/SBC/SBC/admin@Native Directory/2208/Info(1012579)
Total Calc Elapsed Time for [Test.csc] : [0.022] seconds
I have tried using SQL Drivers for ODBC connection as well as Wire protocol driver.
Please assist asap.
Regards,
Vinit

Chawla,
Fixed in 9.3.3, Check out this, their are few more bugs fixed related to DataExport.
http://docs.oracle.com/cd/E10530_01/doc/epm.931/esb_93300_readme.pdf
8404516 Calculator.The DATAEXPORTCOND calculation command clashes with the FIX
command.
8913164 Calculator. Data exports that use DATAEXPORTCOND do not always export all
the data expected because not all conditions are taken into account within the
DATAEXPORTCOND statement
8988310 Calculator. When exporting data using the DATAEXPORT command from a
duplicate outline that contains a shared hierarchy, the exported data contains the
shared member, not the prototype Etc..
Cheers...!!
Rahul S.

Send To iView giving Error AttachmentList cannot be found/created

Similar Messages

Maybe you are looking for