Send to Onenote 2013 not working!

I installed Office 2013 on my windows 8 64bit. Tried every possible way I've found to make Send to OneNote Printer work and insert a pdf to my OneNote. but no luck.
When I print with Send to OneNote 2013 printer, nothing happens. no error, no dialog box, nothing. searched my notebook (I just have one) but it wasn't there.
Things I did to help me solve the problem:
- Updating Office 2013 via windows update
- Repairing Office 2013
- Reinstalling Office 2013
- Checking XPS Printer to see if it works (It was OK)
- Playing with Send to OneNote in Options menu
Please help!

This worked: I went and installed a second party pdf viewer for my browser (pdf xchange viewer for chrome - make sure you disable the chrome viewer at chrome://plugins) and for whatever reason I'm now able to send to onenote properly again. I had
previously tried 'print' > 'send to onenote' using ie, ff, and chrome's built in print commands and also disabling them and using the general Windows print dialogue. This was the only thing that worked. 
I tried this and found it worked also.   I didn't install a new pdf viewer, I just disabled the Chrome pdf viewer and tried it and now it works.  So apparently something in that plug in is interfering with the OneNote code.

Similar Messages

  • Sender Soap Channel is not working - Service Temporarily Unavailable [503]

    dEAR FRIENDS,
    We are facing one critical issue in sender soap adapter. After upgrading our system to PI 7.1 The sender soap channle is not working. From source  system  it is not reaching PI : the log from source system as follows:
    org.springframework.ws.client.WebServiceTransportException: Service Temporarily Unavailable [503]
          at org.springframework.ws.client.core.WebServiceTemplate.handleError(WebServiceTemplate.java:627)
          at org.springframework.ws.client.core.WebServiceTemplate.doSendAndReceive(WebServiceTemplate.java:551)
          at org.springframework.ws.client.core.WebServiceTemplate.sendAndReceive(WebServiceTemplate.java:502)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:351)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:345)
          at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:337)
          at com.palm.txnengine.wsclient.DailyRevenuePostingWSGateWaySupport.postToSap(DailyRevenuePostingWSGateWaySupport.java:23)
          at com.palm.txnengine.wsclient.DailyRevenuePostingImpl.execute(DailyRevenuePostingImpl.java:93)
          at org.springframework.batch.core.step.tasklet.TaskletStep$2.doInChunkContext(TaskletStep.java:264)
          at org.springframework.batch.core.scope.context.StepContextRepeatCallback.doInIteration(StepContextRepeatCallback.java:67)
          at org.springframework.batch.repeat.support.RepeatTemplate.getNextResult(RepeatTemplate.java:352)
          at org.springframework.batch.repeat.support.RepeatTemplate.executeInternal(RepeatTemplate.java:212)
          at org.springframework.batch.repeat.support.RepeatTemplate.iterate(RepeatTemplate.java:143)
          at org.springframework.batch.core.step.tasklet.TaskletStep.doExecute(TaskletStep.java:239)
          at org.springframework.batch.core.step.AbstractStep.execute(AbstractStep.java:198)
          at org.springframework.batch.core.job.AbstractJob.handleStep(AbstractJob.java:348)
          at org.springframework.batch.core.job.flow.FlowJob.access$0(FlowJob.java:1)
          at org.springframework.batch.core.job.flow.FlowJob$JobFlowExecutor.executeStep(FlowJob.java:137)
          at org.springframework.batch.core.job.flow.support.state.StepState.handle(StepState.java:60)
          at org.springframework.batch.core.job.flow.support.SimpleFlow.resume(SimpleFlow.java:144)
          at org.springframework.batch.core.job.flow.support.SimpleFlow.start(SimpleFlow.java:124)
          at org.springframework.batch.core.job.flow.FlowJob.doExecute(FlowJob.java:105)
          at org.springframework.batch.core.job.AbstractJob.execute(AbstractJob.java:250)
          at org.springframework.batch.core.launch.support.SimpleJobLauncher$1.run(SimpleJobLauncher.java:110)
          at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
          at org.springframework.batch.core.launch.support.SimpleJobLauncher.run(SimpleJobLauncher.java:105)
          at org.springframework.batch.core.launch.support.CommandLineJobRunner.start(CommandLineJobRunner.java:207)
          at org.springframework.batch.core.launch.support.CommandLineJobRunner.main(CommandLineJobRunner.java:254)

    Hi,
    Please check this generic description:
    The error message 503 Service unavailable Application stopped! is displayed.
    Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
    Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
    Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
    u2022 Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
    u2022 The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
    u2022 Refer SAP Note 803145,807000,791655
    May it helps.
    Regards,
    Caio Cagnani

  • Content enrichment service for SP 2013 not working

    Content enrichment service for SP 2013 not working
    Not able to debug content enrichment service.. Can you please specify the steps for debugging the content enrichment service
    Any help will be greatly appreciated.
    Regards
    BKPA
    BKPA

    Hi ,
    Please see the following articles, run and debug service with breakpoints using F5 from VS, then register the custom content enrichment service with DebugMode and long Timeout to SharePoint, then start a full crawl to call the web service.
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2014/04/08/how-to-use-the-sharepoint-2013-content-enrichment-web-service.aspx
    http://www.jeanpaulva.com/index.php/2014/05/21/content-enrichment-web-service/
    http://msdn.microsoft.com/en-us/library/office/jj163968(v=office.15).aspx#content_enrichment_configuration
    http://www.blendmaster.net/blog/2012/09/using-content-enrichment-web-service-callout-in-sharepoint-2013-preview/
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Daniel Yang
    TechNet Community Support

  • Sending e-mails does not work

    After switching on the mail server, adding an MX record on the DNS of the server and on the web site of the domain supplier the mail server is working. That is sending and receiving locally works. Receiving external mail works as well but sending mail back does not work. The mail is sent but never arrives. The SMTP log gives the following message.
    Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[173.194.70.26]:25: Operation timed out
    Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[2a00:1450:4001:c02::1a]:25: No route to host
    Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to alt1.gmail-smtp-in.l.google.com[2a00:1450:4010:c04::1b]:25: No route to host
    (domain.nl is not the real used domain name)
    Can anybody help.
    It is the last part of the server that does not work. Wiki's, webserver, network users, calendars, contracts are all working fine.
    Thanks in advance.

    are you on a static IP with a provider that doesn't block port 25?
    from terminal, what happens when you
         telnet gmail-smtp-in.l.google.com 25

  • Out of office replies in Exchange 2013 not working for external recipients

    Hi,
    Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
    I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
    to be on vacation.
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    DROP     ROUTING 
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    HARED... SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    RECEIVE  SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    AGENT... AGENT    [email protected]           
    {[email protected]}             Automatic reply: vacation test
    TRANSFER ROUTING  [email protected]           
    {[email protected]}             Automatic reply: vacation test
    FAIL     SMTP    
    [email protected]           
    {[email protected]}             Automatic reply: vacation test

    Hi Informus,
    Please check if it is allowed in AllowedOOFType of the Remote Domain *
    In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
    To get the currently configured Remote Domains, use:
    Get-RemoteDomain
    Name                           DomainName                                  
    AllowedOOFType
    Default                        *                                           
    External
    Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
    AllowedOOFType     : External
    AutoReplyEnabled   : False
    AutoForwardEnabled : False
    To change the settings, use the Set-RemoteDomain command.
    Enable automatic replies
    Set-RemoteDomain -AutoReplyEnabled $true
    Enable automatic forwards
    Set-RemoteDomain –AutoForwardEnabled $true
    Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
    Set-RemoteDomain –AllowedOOFType $ExternalLegacy
    To change all these properties at once, you can use:
    Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
    Note:
    Valid settings for the AllowedOOFType property are:
    External
    This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
    ExternalLegacy
    This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
    None
    This setting doesn’t allow for the use of OOF messages at all (both internal and external).
    InternalLegacy
    This setting only allows for internal OOF messages to be sent for all Outlook versions.
    Regards,
    Satyajit
    Please “Vote As Helpful”
    if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Outlook Social Connector 2013 not working for linkedin

    Hi
    Outlook Social Connector 2013 is not able to connect to linkedin
    When using Social Network Accounts in Outlook 2013, tick linkedin, the entry of username/password immediately after hitting connect is showing "invalid username or password".
    Appears like it never really checked with the account.
    And
    No, there's in no strange signs/keys used in the password
    Yes, it's working from web entry
    Yes, it's working when using Windows Mail (win 8) linking it to my Hotmail account from same PC
    No, the Antivirus is not the issue, same with or without
    Yes, only one profile is used in Outlook 2013
    Yes, have tried to re-installed Office 2013
    Yes, my linked in profile is set to allow 3rd party applications to connect
    Yes I have tried another social network (Facebook) at this one is working
    And finally, yes I have looked at other treads in outlook forum, here, and "google" around for a day.
    Conclusion, the outlook 2013 addin is in some degree working, i'm very far from the only one with the issue, and no-one seems to have an idea what's really blocking for accessing the linkedin social networks from Outlook 2013, and a solution other than standard
    suggestions to try to re-install and set it up from scratch again. Not working...tried that.
    Any suggestions / ideas ?

    Hi
    Outlook Social Connector 2013 is not able to connect to linkedin
    When using Social Network Accounts in Outlook 2013, tick linkedin, the entry of username/password immediately after hitting connect is showing "invalid username or password".
    Appears like it never really checked with the account.
    And
    No, there's in no strange signs/keys used in the password
    Yes, it's working from web entry
    Yes, it's working when using Windows Mail (win 8) linking it to my Hotmail account from same PC
    No, the Antivirus is not the issue, same with or without
    Yes, only one profile is used in Outlook 2013
    Yes, have tried to re-installed Office 2013
    Yes, my linked in profile is set to allow 3rd party applications to connect
    Yes I have tried another social network (Facebook) at this one is working
    And finally, yes I have looked at other treads in outlook forum, here, and "google" around for a day.
    Conclusion, the outlook 2013 addin is in some degree working, i'm very far from the only one with the issue, and no-one seems to have an idea what's really blocking for accessing the linkedin social networks from Outlook 2013, and a solution other than standard
    suggestions to try to re-install and set it up from scratch again. Not working...tried that.
    Any suggestions / ideas ?
    I have the same problem .... I used it for a while without any problems. From a few days is this no longer works for linkedin...
    Boskaz Design

  • Certain features in Gmail, like chat and sending an email, are not working in normal mode.

    There seems to be some sort of problem with perhaps Flash/Java in Gmail, not sure. The chat box doesn't appear, and I can't send or reply to emails unless I'm in safe mode. It seems as though some add-on or feature is not working properly. This is a new issue, but didn't come about after downloading a newer version of Firefox. I am currently using 3.6.
    == URL of affected sites ==
    http://gmail.com

    Update flash to the latest version: http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin?s=update+flash&as=s#Updating_Flash

  • Sender Agreement - Assigned Users not work

    Hi Experts,
    I have a scenario SOAP - XI and I want to establish authorization to certain users. I am trying to assign user to the Sender Agreement but it does not work.
    I am using in the URL the next prefix /sap/xi/engine?type=entry, but if I use the prefix /XISOAPAdapter/MessageServlet, it works fine.
    Is it possible to assign users to Sender Agreement using the prefix /sap/xi/engine?type=entry?
    Thanks,

    Hi,
    There are two ways of sending a message to XI using SOAP Adapter. The first one is to the adapter engine via ./XISOAPAdapter/MessageServlet. The second one is to the integration engine via propose URL. The first one will use the sender agreement because it is considered a java call but the second one will not (same with PlainHTTPAdapter).
    Hope this helps,
    Mark

  • Sending Mail, Port 587 not working

    My Mail app doesn't send anything. I can receive stuff with not problem, and I did a search here on the forums and found that changing the port to 587 was one fix. That did not work.
    The message I am getting it that the server is timing out, and after calling my ISP and being on the phone with them for half an hour they said if was an apple issue.
    Has anyone figured out any other fixes besides changing the port to 587?
    Blake

    Blake,
    This may only be a typo as you posted, but you have misspelled the server name, in that I am sure the prefix should be smtp and not stmp.
    If only a typo as your posted, then this might be an issue with MTU (maximum transmission unit). See the following support document for methods of diagnosing this:
    http://docs.info.apple.com/article.html?artnum=303192
    If lowering the MTU manually works, then we can look for other ways to fully accomplish the correct balance, which might include shutting down modem, router, and other elements of the network and then repowering.
    Ernie

  • MDT 2013 not working with older systems

    We have been using MDT 2012 with no issues on any of our Dell systems. I just upgraded our Test Bed to MDT 2013 along with ADK for Windows 8.1. After upgrading and getting the new WIM files created, it does not work on two of our model systems. It gives
    the message listed below when trying to boot into the WIM. These two systems are Dell Precision Workstations 370 and 380, both 64-bit Pentium 4 machines. It works great on all of our other system models. I checked the Execute Disable and it is enabled, but
    neither model has virtualization. Does not having virtualization and UEFI play a factor? Thanks.
    Your PC needs to restart.
    Please hold down the power button.
    Error Code: 0x0000005D
    Parameters:
    0x03060F06
    0x756E6547
    0x49656E69
    0x6C65746E
    Mick

    Known issue:
    http://social.technet.microsoft.com/Forums/en-US/387b31cc-66d8-46c6-aae9-fb1e527ba72a/windows-7-image-deployment-failed-in-hp-model-d530-using-mdt-2012-and-adk-80?forum=mdt
    1) Upgrade your machines with modern processors that support the ADK.
          or
    2) Downgrade to the WAIK
    http://www.microsoft.com/en-us/download/details.aspx?id=5753 and stick with Windows 7.
    Keith Garner - keithga.wordpress.com

  • HT201412 I have an iPod touch 4th generation and after sending emoji iMessage is not working, it closes every time I try to open it and I have already tried resetting my iPod and restarting it.

    I have an iPod touch 4th generation and after sending emoji it no longer works. Every time I try to open iMessage it closes. I have already tried resetting and restarting my iPod and neither has worked.

    Have you tried getting rid of emoji?

  • HT201365 my text to send messages is now not working correctly after upgrading

    Since upgrading last week my text is not working  correctly it is very slow does not show the letter being used and takes seconds to be put in

    Looking into the Diagnostics and Usage Reports in 'Settings' -> 'General' -> 'About' I see nine different "ExcResource_MobileMail_DATE" reports. Looking at the report I see a SysInfoCrashReport that indicates that the CPU was pegged at over 50% (mostly over 75%) for over 180 seconds using the MobileMail app.
    I also see a "MobileMail_DATE" report that indicates that there was an 'Exception raised during monitored invocation of _loadMoreMessagesWithMaxVisibleIndexPath:maximumIndexPathsBySource:, exception: ** -[__NSArrayM objectAtIndex:]: index 4294967295 beyond bounds for empty array"
    And finally I see three "stacks+MobileMail-DATE" reports with "Power assertion timeout for 'com.apple.message.fetchMobileSynchronously...' Simply resetting it now." and "Power assertion timeout for 'com.apple.mobilemail.messagebodyloader' Simply resetting it now" reports.
    I updated to iOS 7.0.4 and decided to try and delete the account in my Mail settings and recreate it and set it to manual instead of the non-working fetch. Now, when I try to check my mail it still takes up to five minutes to respond, pulling the screen to refresh brings up the spinner for about one second and then disappears and no indications of activity occur until about three minutes later when I see the spinner in the status bar near the clock and then see a notification that it's downloading X of Y messages. At that point, message headers come in very quick and then about a minute later message previews come in. At random times, opening the mail app I get a "Password incorrect" error, even though the password works on other attempts.

  • Outlook 2013 sending email using template not working properly...

    I've created several email templates by doing the following:
    open new message
    add some tekst in the body
    save as > oft file
    Now when I open such oft file I add some modifications in the body text and send the message. However, the send item does not contain the modifications I just made, only the text that was included in the template.
    We're using Outlook 2013 SP1 (with all microsoft updates installed) with Exchange 2013 SP1 standalone server. Is this a Outlook or Exchange issue and how can I resolve this?
    Thnx Remco

    Hi Remco,
    Please also try to start Outlook in safe mode and test again to check if this issue continues. To start Outlook in safe mode, press Windows key + R to open the Run command, type
    outlook /safe and press Enter.
    If problem continues in Outlook safe mode, please try creating a new mail profile and reconfigure your email account, then creating a .oft template to test this issue again. For your convenience:
    http://office.microsoft.com/en-in/outlook-help/create-an-outlook-profile-HA102749460.aspx
    Please let me know the result.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Send file as email not working when Outlook 2013 is default mail client

    Have Adobe Reader XI 11.0.2 installed.  Running Windows 7 Pro 64 bit with Office 2013 installed.  When I set Default E-mail Application to Microsoft Outlook from Preferences I receive the following error trying to send any file as an e-mail:
    "Either there is no default mail client or the current mail client cannot fulfill the messaging request.  Please run Microsoft Outlook and set it as the default mail client."
    I have toggled Microsoft Outlook 2013 off and back on as the default e-mail handler in the Default Programs of the Control Panel, but this has not resolved the issue.
    I am guessing this may be a new bug since Outlook 2013 only recently came out, but if not, and someone has a fix, please let me know.
    Thank you,
    - Brian

    Please try the steps mentioned at: http://support.microsoft.com/kb/813745 and check whether the issue is resolved or not.
    If not, then try starting the outlook in safe mode using (Outlook.exe /safe) and check the issue again.
    Hopefully, these will resolve your issue.

  • SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

    So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
    folder.
    The GPO (U-Office2013 Default Save Location) only contains:
    1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
    2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
    The GPO is linked at the OU that contains my users for my SBS organization.
    When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
    Applied GPOs
    Default Domain Policy dyndns.local AD (24), Sysvol (24)
    U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
    In the gpresult report, the applied settings appear under:
    Administrative Templates
    Extra Registry Settings
    software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
    software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
    BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
    The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
    Any ideas?
    I've already tried re-installing the ADMX templates and re-created the GPO's several times.
    I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
    utilize the recently added ADMX template that don't seem to be working for me.
    Thanks in advance.

    Hi Justin,
    Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
    per your suggestion:
    1. log on as a user who has never logged onto the workstation before.
    2. run gpupdate /force (entered y for yes when prompted to log off).
    3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
    4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
    I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
    Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
    -------gpsvc.log sections containing the aforementioned GUID start---------
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  ==============================
    GPSVC(410.df0) 09:10:51:186 GetGPOInfo:  ********************************
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  User has access to this GPO.
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  GPO passes the filter check.
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  Found functionality version of:  2
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  Found file system path of:  <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  Found common name of:  <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
    GPSVC(410.1730) 09:10:51:186 ProcessGPO:  Found display name of:  <U-Word 2013 Default Save Location>
    GPSVC(410.1730) 09:10:51:191 ProcessGPO:  Found user version of:  GPC is 3, GPT is 3
    GPSVC(410.1730) 09:10:51:191 ProcessGPO:  Found flags of:  0
    GPSVC(410.1730) 09:10:51:191 ProcessGPO:  Found extensions:  [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
    GPSVC(410.1730) 09:10:51:191 ProcessGPO:  ==============================
    GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO:  Local GPO's gpt.ini is not accessible, assuming default state.
    GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO:  GPO Local Group Policy doesn't contain any data since the version number is 0.  It will be skipped.
    GPSVC(410.1730) 09:10:51:191 GetGPOInfo:  Leaving with 1
    GPSVC(410.1730) 09:10:51:191 GetGPOInfo:  ********************************
    -------gpsvc.log start---------
    -------output of gpresult /r-------
    Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
    Copyright (C) Microsoft Corp. 1981-2001
    Created On 5/30/2014 at 9:24:08 AM
    RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
    OS Configuration:            Member Workstation
    OS Version:                  6.1.7601
    Site Name:                   Default-First-Site-Name
    Roaming Profile:             N/A
    Local Profile:               C:\Users\ssanders
    Connected over a slow link?: No
    COMPUTER SETTINGS
        CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
        Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
        Group Policy was applied from:      GCSBS.gc.local
        Group Policy slow link threshold:   500 kbps
        Domain Name:                        GC
        Domain Type:                        Windows 2000
        Applied Group Policy Objects
            Windows SBS CSE Policy
            Windows SBS Client - Windows Vista Policy
            Windows SBS Client Policy
            Update Services Client Computers Policy
            C-Create Syntiro Root Folders
            Default Domain Policy
        The following GPOs were not applied because they were filtered out
            Local Group Policy
                Filtering:  Not Applied (Empty)
            Windows SBS Client - Windows XP Policy
                Filtering:  Denied (WMI Filter)
                WMI Filter: Windows SBS Client - Windows XP
        The computer is a part of the following security groups
            BUILTIN\Administrators
            Everyone
            BUILTIN\Users
            NT AUTHORITY\NETWORK
            NT AUTHORITY\Authenticated Users
            This Organization
            OPTI9020-01$
            Domain Computers
            System Mandatory Level
    USER SETTINGS
        CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
        Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
        Group Policy was applied from:      GCSBS.gc.local
        Group Policy slow link threshold:   500 kbps
        Domain Name:                        GC
        Domain Type:                        Windows 2000
        Applied Group Policy Objects
            Windows SBS User Policy
            Windows SBS CSE Policy
            Small Business Server Folder Redirection Policy
            U-Word 2013 Default Save Location
            U-Office 2013 Disable Backstage
            U-Office Disable Start Screen
            U-Office Trust Center Settings
            U-Word Autorecover Location
            U-Word Autosave Interval
            U-Word Disable Capitalization First Word
            U-Word Set Arial Default Font
            U-Word UI Customizations
            U-Power Plan Settings
            Default Domain Policy
        The following GPOs were not applied because they were filtered out
            Local Group Policy
                Filtering:  Not Applied (Empty)
        The user is a part of the following security groups
            Domain Users
            Everyone
            BUILTIN\Administrators
            BUILTIN\Users
            NT AUTHORITY\INTERACTIVE
            CONSOLE LOGON
            NT AUTHORITY\Authenticated Users
            This Organization
            LOCAL
            Windows SBS Link Users
            Windows SBS Fax Users
            Windows SBS SharePoint_MembersGroup
            Windows SBS Folder Redirection Accounts
            Windows SBS Remote Web Workplace Users
            High Mandatory Level
    -------end gpresult output-------       
    Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

Maybe you are looking for

  • Unable to view entries in FAGLL03 for Zero Balance Clearing Account

    Hi experts, We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting th

  • J2iun tr.code

    Dear all, My client want to utilize the amount so we are trying in j2iun tr.code the problem in j2iun cenvat BED is not tallying with trial balance . all the trial balances as per standard SAP please advise in j2iun 7,00,0000 but as per trial balance

  • Ale-idoc  steps

    Hi All, Can any one please give me the step by step ale-idoc toturial.about the steps to send data from one client to other. Regards, bunty

  • Delete Additional while spaces in a String

    Hi Friends, How do we delete additional white spaces inbetween a String. Eg:- String a = "hello     everyone     out       therer";should be printed as "hello everyone out there"What could be the optimized solution for this? Thanks.

  • How set firefox as default youtube viewer

    When I click a youtube link in a document IE starts and opens the video. How can I make Firefox the default?