"Send To - Shake" issue

During the capturing and logging I used the method of capturing the entire tape then subclipping. I noticed that when I try to send certain parts of the edit to Shake the timeShift calculations are off. These calculations are set to the subclip. However, the fileIn source is the main clip. Is there any easy fix to this problem? I personally don't want to manually change the timeShift, inPoint, and outPoint settings in Shake. Because then I'd have to find out exactly where the subclip is, then find where the in and out points are. That would really put a damper on workflow.
-Bob

I consulted a friend of mine about this issue and he's come up with one solution that I can't say I'm all too happy about. One solution is this, I could export the sublip then drop the file into my browser, using in and out points on the new main clip. I haven't yet tried this out, the subclip is currently rendering out. I know this will work, though.
However, one issue I don't like about this, I'll have to render out every subclip I'm going to use "Send To -> Shake" on, reapply the same in and out points from the subclip to the new main clip, drop the new cut into the timeline, then finally use Send To -> Shake. I personally would not like to add more to my workflow, especially adding more rendering time, unless there isn't any other way.
For some reason I'm always thinking there's a certain setting I'm overlooking that'll fix the way FCP is sending correct in and out point information to Shake that's in conjunction with the main clip and not the referenced subclip.
-Bob

Similar Messages

  • Send to Shake Difficulties

    I am having difficulty sending clips to Shake and getting them back on the timeline. I have followed all the tutorials that I can get by hands on but it just does not seem to work on my system.
    here is a screen capture of what I am talking about
    http://www.youtube.com/watch?v=Y1STGWOQqAQ
    Notice that when I send to Shake it does not add it to the timeline.
    Notice that when I render it in Shake it does not produce a flip book

    That's because you didn't specify a placeholder QuickTime movie in the dialog that pops up.
    P.S. Good idea about the YouTube video. That makes things a lot easier.

  • Bellsouth "send" e-mail issues

    I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to do with Bellsouth's conversion to AT&T or not.
    Basically, I can receive e-mail and send newly created, blank e-mail. However, I am unable to send e-mail with attachments or reply to e-mails received or forward e-mails received.
    I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
    I am at a complete loss and don't know what to try next. Any suggestions????

    Robert Daddario wrote:
    I am having a Bellsouth send e-mail issue that has cropped up in the past couple of weeks (no changes in settings on my side). Don't know if it has anything to L"*_ with attachments or reply to e-mails received or forward e-mails received.
    I tried a suggestion of changing the port number from 25 to 587 to no avail. I confirmed my Preference setups with Bellsouth tech support and they say everything is configured OK. Thinking it might be Apple Mail, I downloaded and used the Thunderbird e-mail client, but that exhibits the same problems noted above (similar message about problems with the STMP server or the server is unavailable or is refusing STMP connections. Again, this only happens with certain types of sent e-mails noted above).
    I am at a complete loss and don't know what to try next. Any suggestions????
    I had problems when I converted to Mac last Spring, and most of the problems came from the DSL Tech Support Team.
    Please make sure that your settings haven't changed from the following.
    Go to Mail - Accounts
    POP Acct Incoming Server: mail.bellsouth.net
    SMTP - Outgoing Mail Server: mail.bellsouth.net
    Click on Server Settings:
    Sever Port Should Be: 25
    Make sure SSL - Secure Sockets Layer Is *NOT Selected*
    Click OK
    Select Addvanced on the upper right of the Accounts Tab.
    Port should be : 110
    *Do Not Select* Use SSL
    Make sure the following are selected:
    1) Enable This Account
    2) Include When Automatically Checking For New Mail
    3) Remove Copy From Server After Retrieving A Messagee
    Hope this helps.
    I work for at&t - formerly BellSouth, and we haven't done any email transformations for our FastAccess customers, and I'm sure that when we do a Transformation, you will have Dual (bellsouth -at&t) emails for a while so you can advise Family and Friends.

  • Send to Shake Tips

    Lately I've been using FCP's 'Send to Shake' quite a bit and thought I'd offer some suggestions as a means to save some time for those new to it. I suppose these are in the manual but with all I've been absorbing lately I can't say for sure.
    1- Shake will not understand transitions that are part of the clip sent from FCP. These come over like a missing frame (black). Do your Shake stuff, then, once back in FCP, add your transitions.
    2- Speaking of transitions. The clip Shake outputs is whole. Meaning, you can't extend it (either side) in FCP. If you want to add transitions you'll either need to roll off some of the clip or plan ahead and send a clip to Shake that's longer than needed.

    > IF you are daring you can change the File Out node to include frames less
    than 1 and more than your last frame
    Consider me daring - I'll give it a go ASAP.
    Very useful to know. Thanks
    Andy
    G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Send to 'Shake' from FCP not working

    Well i sort of lie, it does open shake and open a file, but it's never the correct footage. He's is what I do, tell me if I'm doing something wrong.
    1. Select footage that I need to do some shake suff with by highlighting it in the FCP timeline.
    2. Go to 'File' 'Send to' Shake
    3. Shake opens but with a completely differn't part of the video I am editing. The only way I have found for it to work is to actually export the clip and use the 'Filein' into Shake, which works, but is time consuming.
    Can anyone help.
    Thanks.

    If you have a speed change or maybe subclips, you could get what you're describing...
    Patrick

  • Does anyone have an email address to send a security issue to apple?

    found something they should know about (if they don't already) and wonder how to tell them... tried calling... no real email's listed... it's not a bug that hasn't already hit them in the past but still don't wanna post it on the boards.
    so my question is: anyone know a valid email address that i can send a security issue about the iphone to?

    http://www.apple.com/support/security/

  • Can any body send me some issues about mail sending .

    can any body send me some issues about mail sending .
    thanks alot !
    mail to :<i><b>[email protected]</b></i>

    HI
    GOOD
    GO THROUGH THIS CODE
    REPORT ZTSAPMAIL.
    DATA: X_OBJECT_TYPE LIKE SOOD-OBJTP.
    DATA: BEGIN OF X_OBJECT_HD_CHANGE.
    INCLUDE STRUCTURE SOOD1.
    DATA: END OF X_OBJECT_HD_CHANGE.
    DATA: BEGIN OF X_OBJCONT OCCURS 10.
    INCLUDE STRUCTURE SOLI.
    DATA: END OF X_OBJCONT.
    DATA: BEGIN OF X_OBJHEAD OCCURS 0.
    INCLUDE STRUCTURE SOLI.
    DATA: END OF X_OBJHEAD.
    DATA: BEGIN OF RAW_HEAD.
    INCLUDE STRUCTURE SORH.
    DATA: END OF RAW_HEAD.
    DATA: BEGIN OF X_RECEIVERS OCCURS 0.
    INCLUDE STRUCTURE SOOS1.
    DATA: END OF X_RECEIVERS.
    PARAMETERS: RECEIVER LIKE X_RECEIVERS-RECNAM. " Name
    *BUILD MESSAGE HEADER
    MOVE 'Sort field goes here' TO X_OBJECT_HD_CHANGE-OBJSRT. " Sort field
    MOVE 'Name of the object goes here' TO X_OBJECT_HD_CHANGE-OBJNAM. " Name
    MOVE 'Document title goes here' TO X_OBJECT_HD_CHANGE-OBJDES. " Title
    MOVE 'F' TO X_OBJECT_HD_CHANGE-OBJSNS. " Functional OBJECT
    MOVE 'E' TO X_OBJECT_HD_CHANGE-OBJLA. " Language
    Object type of the new document
    MOVE 'RAW' TO X_OBJECT_TYPE.
    CLEAR X_OBJCONT.
    MOVE 'Contents of mail' TO X_OBJCONT-LINE.
    APPEND X_OBJCONT.
    CLEAR X_OBJCONT-LINE. APPEND X_OBJCONT.
    MOVE 'More contents' TO X_OBJCONT-LINE.
    APPEND X_OBJCONT.
    MOVE 'Still more contents'
    to x_objcont-line.
    APPEND X_OBJCONT.
    MOVE ' ' TO X_OBJCONT-LINE.
    APPEND X_OBJCONT.
    Specific header (Dependent on the object type, here RAW)
    REFRESH X_OBJHEAD.
    DESCRIBE TABLE X_OBJCONT LINES RAW_HEAD-RAWSIZ.
    MOVE RAW_HEAD TO X_OBJHEAD.
    APPEND X_OBJHEAD.
    *RECEIVERS table
    CLEAR X_RECEIVERS.
    REFRESH X_RECEIVERS.
    MOVE RECEIVER TO X_RECEIVERS-RECNAM. " Name
    MOVE 'B' TO X_RECEIVERS-RECESC. " Receiver type
    MOVE 'X' TO X_RECEIVERS-SNDCP. " Send as a copy
    MOVE 'X' TO X_RECEIVERS-SNDEX. " EXPRESS DOCUMENT
    APPEND X_RECEIVERS.
    CALL FUNCTION 'SO_OBJECT_SEND'
    EXPORTING
    folder_id = 'OUTBOX'
    forwarder = x_forwarder
    object_fl_change = x_object_fl_change
    OBJECT_HD_CHANGE = X_OBJECT_HD_CHANGE
    object_id = x_object_id
    OBJECT_TYPE = X_OBJECT_TYPE
    OUTBOX_FLAG = 'X'
    OWNER = SY-UNAME
    store_flag = x_store_flag
    importing
    object_id_new = x_object_id_new
    sent_to_all = x_sent_to_all "May need to use
    TABLES
    OBJCONT = X_OBJCONT
    OBJHEAD = X_OBJHEAD
    objpara = x_objpara
    objparb = x_objparb
    RECEIVERS = X_RECEIVERS.
    Firstly SAP Mail
    A SAP mail is a mail internal to the SAP system. It is a very good forum to exchange information with other users. Using a SAP mail in ABAP code facilitates exchange of automatic messages at various stages of the business process. It is easy to use and saves many hassles involved in using workflows for exchanging messages.
    The ABAP code to send a sap mail is built around the FM SO_OBJECT_SEND which has the following pattern.
    call function 'SO_OBJECT_SEND'
    exporting
    EXTERN_ADDRESS = ' '
    FOLDER_ID = ' '
    FORWARDER = ' '
    OBJECT_FL_CHANGE = ' '
    OBJECT_HD_CHANGE = ' '
    OBJECT_ID = ' '
    OBJECT_TYPE = ' '
    OUTBOX_FLAG = ' '
    OWNER = ' '
    STORE_FLAG = ' '
    DELETE_FLAG = ' '
    SENDER = ' '
    CHECK_ALREADY_SENT = ' '
    importing
    object_id_new =
    sent_to_all =
    tables
    OBJCONT =
    OBJHEAD =
    OBJPARA =
    OBJPARB =
    receivers =
    PACKING_LIST =
    ATT_CONT =
    ATT_HEAD =
    NOTE_TEXT =
    exceptions
    active_user_not_exist = 1
    communication_failure = 2
    component_not_available = 3
    folder_not_exist = 4
    folder_no_authorization = 5
    forwarder_not_exist = 6
    note_not_exist = 7
    object_not_exist = 8
    object_not_sent = 9
    object_no_authorization = 10
    object_type_not_exist = 11
    operation_no_authorization = 12
    owner_not_exist = 13
    parameter_error = 14
    substitute_not_active = 15
    substitute_not_defined = 16
    system_failure = 17
    too_much_receivers = 18
    user_not_exist = 19
    x_error = 20
    others = 21.
    THANKS
    MRUTYUN

  • Sender Mail Adapter issue

    Hi All,
    We are getting this error in Sender Mail adapter.
    "exception caught during processing mail message; java.net.ConnectException: A remote host refused an attempted connect operation"
    It is a (Lotus Notes) Mail to File scenario.
    Used POP3, and gave the URL as POP:// ** .
    I have tried pinging the server and getting a good response.
    I have also tried the OS01 ans it returned a response : Program Terminated.
    I am not sure if the POP3 port is enabled.
    Are there any check points we are missing ?
    Please throw some light on this as we need to solve this asap ..
    Yashwanth
    Edited by: YashwanthSVK on Aug 2, 2011 7:18 PM

    Shabarish is right.
    This seem a connectivity issue. Try to ping Mail server from your PI System and check pop3 port.
    This document can be helpful for you:
    http://wiki.sdn.sap.com/wiki/display/XI/SMTPConfigurationinSAPXI

  • Microsoft Exchange is not updating local Outlook - Send and Receive issues.

    Hi everyone,
    Our office has just moved to using Office 365 business edition where we are sending and receiving emails via Microsoft Online Exchange. 
    It has been running for 3 days so far and we do love the product however we are having a major issue at the moment and that is our local outlook 2010 and 2013 folders are not constantly synching with the exchange.  We are finding that it can be hours
    before emails push through to our inbox and we will receive 20 emails all at once.  It is also occuring when we send emails, they will sit in the Outbox and the only way it seems to get them to send or receive is to close Outlook and re-open the program.
    We also find that sometimes when we are out of the office and using the 'Outlook Web App' that emails we send to clients via here and not always synching with the local Outlook its a bit of a mess really.  This is not great as we are a legal office
    and need to attend to emails urgently at times and must have all emails arrive locally.
    Can anyone shed some light on how this matter can be fixed urgently?
    Thanks
    Lisa

    Hi,
    As far as I know, for the sync issue in the on-premise Exchange server environment, we can check if we have selected the option ”send immediately when connected”:
    Outlook 2013: file>options>advanced> send and receive> send immediately when connected
    However, since your server is Exchange online, I recommend you ask for more professional help on our Exchange online forum:
    http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
    Thanks,
    Angela Shi
    TechNet Community Support

  • FTP sender channel filename issue

    Hi ,
    I have created a sender FTP channel with Filename Smart_*.csv.
    But channel is not picking files from FTP server, even not working for *.csv.
    Although when I have mentioned the complete filename in channel, its picking the file from server.
    Please guide.
    Thanks & Regards,
    Nida

    Hello,
    >>Only * is also not working
    Strange...I was searching SDN and found these two links describing the same issue which u are facing now...You can try to implement Mugdha's reply and see if it works?
    File adapter  (file name)  Wild Card * not  working
    In addition to that, check solution 36 in 821267...
    FTP & Wildcards (File adapter issue) - asterisk not working
    Thanks
    Amit Srivastava

  • Sender RFC Adapter Issue

    Hi ,
    I am using the following scenarion  (SAP ECC)Sender RFC>PI 7.1->Receiver JDBC(ThirdParty).
    The issue is whenever the the ECC system is down and is up again , the RFC sender messages are getting struck in SM58(tRFC queue).What I manually do is , go the RFC Sender communication channel in PI and reactivate it again, by making a small change in the description of the communication channel.
    So, my question is , whether there is a automatical ways to handel this issue.
    Any other suggestions would be highly appreciated.
    Thanks,
    Venu

    There is no standard way to perform this automatically. I think restart of ECC is not a frequent practice in any business, therefore ideally you should add this as one of the post processing procedures after ECC restart.
    Technically, there is possibility of creating a scenario which can run through a job on ECC running once after each restart. This can call webservice in PI to fetch communication channel information and reactivate it. Not a solution I would recommend.
    Regards,
    Prateek

  • SAP PI 7.31 / Sender SOAP Channel Issue with XML tag Main/@versionMajor has incorrect value 000; expected value is 003

    Hi PI Experts,
    We are on SAP PI 7.31 SP 10.
    We are in the process of integrating ARIBA P2P solution using SOAP Adapter as sender to connect Ariba with our PI system.
    We have configured all required components in ESR and ID(Most of them are content provided by Ariba).When we try to post a message into PI using SOAP UI we are ending with below error.

    http://<host name> : <port name> /XISOAPAdapter/MessageServlet?channel= <party name> : <service name> : <channel name>
    For the above issue we had configured SOAP Sender channel as above,and the URL we are using to hit PI is as above screenshot.
    We have followed the note on this topic with out any luck.
    1378872
    We are not sure where is problem.As the issue is not reaching to PI not able to see the messages in SXMB_MONI.
    and in the SXMB_ADM PI has been configured as Integration Server.
    I had even tried to change the message protocol as XI3.0 in SOAP sender channel and noluck.
    I have tried to ximessage=true query also in URL and noticed that not working.This is clear that the message we are trying to send from Ariba is not compatible with XI3.0 protocol,Ariba is not having any option to change at their end as it is a cloud application and many customers have been using same with out any issues.
    We have tried maintain the Java System properties in NWA as XPI.Adapter.Version.Major = 3 but no luck.
    Can some one provide us the solution to get rid of this issue?

  • Sender SOAP Adapter issue with webservices for authorization.

    Hi All
    Issue:
    As we are developing a Web Service to fetch account balance from SAP(upon receiving the account no from client) and have given the wsdl file to J2EE application  to call or make use of the service.  But as a part of that service they expect userid/password to be entered manually from client  pop-up.  At this point of time, we don't want to enter userid/password manually but  we want this to be hardcoded/embedded in Webservice so that  there is no need of manual intervention upon calling this service.
    Actual Requirement:
    From Webservices to R/3-ECC6.0-IS-Banking-RFC (Synchronous Interface)
    Sender: SOAP Adapter synchronous
    Receiver: RFC Adapter synchronous
    Note: Requesting a account number and getting response from RFC is account Balance and Date to webservice
    Regards
    Kiran kumar.s

    Hi praveen,
    Thanks for ur  reply.What you said is exactly right but for time being i have to make the client not get the authorization(password--Username and password(pop-up)) when he invokes the WSDL into webservice for that u told that to write some hardcode in J2EE application,but i don't know that where to write and what to write.so, if possible can u give me the code and procedure.
    This is the URL:
    http://hcl3sap:50000/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_SOAPSENDER
    Regards,
    kiran kumar.

  • Sender file channel issue

    Hello All,
    Here I have a problem with sender file communication channel. THe channel is not able to pick a file as the file format is not correct andf throwing exception in the channel which is expected. But Its not allowing to go and pick the other files with correct format till I remove the bad file from the Source dir location.
    How to get out of this issue Pls help me
    Regards,
    Moorthy

    Hi,
    Maybe you can delete or archive the erroneus file and then all the other files are processed?
    Set checkbox Archive Faulty Source Files and give directory where the erroneus files are moved.
    Also under module tab add new row  int the Processing Sequence table like this:
    AF_Modules/MessageTransformBean ............. 1
    And in under Module Configuration:
    Module Key ........ Parameter Name ...........................Parameter value
    1 ......................... Transform.PermanentErrors .........true
    If this won't help, please check the No[Note 1265534 - Archive faulty files does not work with add time stamp mode|https://service.sap.com/sap/support/notes/1265534]. Basically this means that archiving does not work if you have set the 'Add timestamp' option so check that too.
    More about the Me[MessageTransformBean Fauty Source files |http://help.sap.com/saphelp_nw70/helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm]
    Please remember that empty files are handled with their own settings.
    Regards,
    Mika

  • Sender Comm channel issue

    Hi to All.
    I am facing a issue sender comm channel?
    comm channel is picking the file before placing the file in the source dir, the file size is some times coming morethan 6MB.
    Could you please help me on this?
    Thanks in advance.

    Hi Yadav,
    sapnote_0000821267 (as suggested by Kris)
    3. File Locking / Incomplete Processing
    Q: I sometimes observe that files are processed only partially, i.e., only a fragment from the file's start is converted into an XI message. Nevertheless, the file is usually archived completely. Does the File Sender Adapter honor if another process has locked a file for exclusive use?
    A: Unfortunately, the J2EE 1.3 technology the File Adapter is built upon does not support file locking. This limitation affects the File Adapter's operation. Depending on whether the JRE implementation for the operating system under which the adapter runs uses mandatory file locking or advisory file locking, opening a file that is currently being written to by another process will fail or not.
    If opening the file fails, no problem exists and the adapter will try to open the file each poll interval until it succeeds.
    However, if opening the file is not prevented by the operating system, the adapter starts to process the file although it is still being modified. Since XI 3.0 SP11 / PI 7.0 there is a parameter named "Msecs to Wait Before Modification Check" in the advanced settings of the File Sender channel configuration to work around this issue. This setting causes the File Adapter to wait a certain time after reading, but before sending a file to the Adapter Engine. If the file has been modified (which is basically determined by comparing the size of the read data with the currentfile size of the input file) after the configured interval has elapsed, the adapter aborts the processing of the file and tries to process the file again after the retry interval has elapsed.
    If this option is not available for the settings you would like to use, the following algorithm (to be implemented in your application) may be used to ensure that the File Adapter only processes completely written files:
    - Create the file using an extension, which does not get processed by the File Adapter, e.g., ".tmp"
    - Write the file content
    - Rename the file to its final name, so the File Adapter will notice its existence and pick it up
    Regards,
    Raghu_Vamsee

Maybe you are looking for