"Send to SpeedGrade" doesn't... do... anything...

Hello -  I have been trying to get my project out of Premiere and eventually into DaVinci for grading. An Adobe rep suggested going to SpeedGrade, then saving an XML from there (in order to preserve nested sequences and merged clips).  I have not been able to successfully complete the export to speedgrade process, though - I do the action, and it creates an .ircp file, and a media folder, but no media. There's no status bar that appears in Premiere, and Premiere continues functioning like I never did anything.  Any ideas?  Ryan

< sigh >
Perhaps Adobe need an Apple moment..... where they said at NAB - OK guys - we're working on XYZ and it will be released this year.... then we could all shut up and wait patiently.
Of course, that won't go quite as well when they add "oh and BTW - these missing feautures that would make our products useful - like they should have been all along - oh, yeah, they won't be a free upgrade, we'll trickle them out over the next two or three paid for upgrades so you'll have to keep spending money".
And we're still waiting for the fix for AVCHD that they broke in April/May with CS6.  C'mon Adobe, surely someone is working on that right?  Even though it's a third party codec, some IS chasing them right?   
If we can't get a feature put back (working AVCHD) that was there 'before' a release, what chance of making other stuf work how we all think it should....
</ sigh >

Similar Messages

  • How do I change my iMessage from sending from my email instead of my number? I went into settings and where I'm suppose to change where I send and recieve from it doesn't say anything about changing to a number but changing to another email account.

    How do I change my iMessage from sending from my email instead of my number? I went into settings and where I'm suppose to change where I send and recieve from it doesn't say anything about changing to a number but changing to another email account.

    WHen you go into iMessage settings at the top it will say your email account you are using for iMessage, press that and it will give options. Press sign out and it will use your current phone number if you're using an iPhone, if you're using an iPod then it will turn iMessage off. P.S. it doesn't sign you out of your itunes account for iTunes and all that, just for iMessage

  • Sender File Adapter is not reading anything

    Hi,
    I have a really strange problem here. I'm tyring to read a file using file adapter (FTP) and the adapter doesn't read anything and it does not throw any error in the communication channel monitoring.
    I'm using a receiver file adapter to write files to the same FTP folder, so it can't be a connectivity problem. And I tried to get the file using Filezilla and it works fine...
    In the sender file adapter I tried to simplify the maximum to solve the problem:
    - NO File Content Conversion
    - NO advanced attributes
    - I used the "*" in the file name to read any file
    - I've only configured the FTP connection, the folder and the file name. I don't understand why it isn't working...

    Yes I got this message:
    Polling interval started. Length: 5,0 seconds
    Now I tried something... In the FTP Connection parameters, I set as the server a random and unexisting name, and I get the same result...
    I'm starting to thing that some firewall is blocking the connection, but I have to wait until next monday to know this. But I don't understand why the receiver FTP channel is working...
    PD: The cache is correctly refreshed because I changed the polling interval time, and it has been updated on the monitoring

  • Lumia 920 doesn't do anything

    Hi everyone,
    My Lumia 920 doesn't do anything at all, when I push the powerbutten it doens't vibrate, the screen is black and I can't hear a sound. Is there anything I could try myself, or do I need to send it to nokia?
    thanks for thinking.

    There are a few things you can try before sending it off.
    Firstly, connect it to a charger and leave it for 30 minutes just in case the battery is so dead that it can't even register the fact that you want to switch on.
    If that doesn't bring it back to life then the next thing to try is a soft reset. Simply press and hold the "volume down" and "power/lock" keys together for about 20 seconds. The phone should vibrate and boot up. While your settings, installed apps, media etc. will be preserved, you might have to set the clock again.
    If even that doesn't work then the next thing to try is a hard reset. Now, this will erase everything in the phone and make it start in pristine factory state. Hopefully your contacts, messages, photos and apps will have been backed up to SkyDrive, meaning that you should be back up and running again fairly quickly.
    Disconnect the charger and wait for a minute. Next, press and hold the "volume down" key while connecting the charger. You should see an exclamation mark on the screen. Then, press in sequence the following keys: "volume up", "volume down", "power/lock" and then "volume down" again. The phone should reinitialise itself.
    If none of the above work then you will have to send the phone off for repairs, I'm afraid.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Send to Speedgrade is INCREDIBLY SLOW

    Wow...I have a 9min sequence of 720p P2 clips..click the sequence from the bin, then File->Send to Speedgrade...takes nearly 15-20minutes!!! LOL! SERIOUSLY! And WHY did you (Adobe) send AUDIO to a color grading application???? Why introduce the overhead??? I don't need to hear anything while i'm grading!! Colorist typically don't!!  I'm assuming that .DPX transformation is simply too expensive a process...and your tutorial videos showing this to be some speedy process is complete bull. My system specs:
    Win 7 64bit
    16GB mem
    3TB drive (dedicated to editing, NOT operating system drive)
    AMD Phenom x6 1100T

    I have never used Speedgrade so I thought I would check it out after reading this post. I tried to send a 30 minute clip to Speedgrade thinking that since my system is pretty fast, it would work just fine. No. Not even close.
    So I tried to send a 15 second clip thinking that it would go pretty quick. No. Not even close.
    This is nuts. It makes my PC act like it is 10 years old. This will take more time to research than it is worth to me. Sorry.

  • I have money in my itunes account but when I try to buy a song it doesn't let me buy it or download.  It doesn't do anything!

    I have money in my itunes account but when I try to buy a song it doesn't let me buy it or download.  It doesn't do anything!

    You cannot and need to ask Apple to reset your security questions. To do this, click here and pick a method; if the article doesn't list one for your country or you're unable to call, fill out and submit this form.
    Changing the rescue email address requires supplying two of the answers. They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (111899)

  • MSI 970a-g46 motherboard starts up but doesn't display anything.

    Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
    CPU: AMD Phenom 2 x4 965
    GPU: nVidia GeForce 560 GTX
    Ram: 8gb Kingston HyperX Fury 1866mhz.
    PSU: Corsair 650TX (650 Watts)
    Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
    I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
    I've gone over and checked/tested numerous things:
    * The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
    * I've tried jumping the CMOS multiple times to no avail.
    * I tested the ram on another computer and it worked just fine on that one.
    * I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
    So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
    The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
    EDIT: Some other things I did but forgot to mention:
    * Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
    * Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
    * Re-seated GPU multiple times, re-connected cables multiple times.
    What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
    EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
    EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

    Quote from: rhradacut on 06-January-15, 16:49:14
    What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
     Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
     None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
    Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
    Once again thanks for helping out on solving my problem.

  • Hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    Hello John...
    You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare  here.

  • I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

    I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

    iTunes 10.7 is compatible with Snow Leopard.
    You can download it here: http://www.apple.com/itunes/

  • My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

    My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

    T
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

    I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • Im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements  but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything

    im trying to instal snow leopard on my macbook. its running tiger 10.4.11 and it meets all the requirements  but it ask me for a restart to begin instalation progres, i restar it and it doesn't happen anything. anyone can help me?

    I assume the restart was prompted during the installation process?
    First of all, that restart will take several minutes while files are moved into place and should not be interrupted.
    If it fails, or you have interrupted the process, you'll need to boot from the installer (hold down the C key on startup) and use Disk Utility to erase the drive prior to continuing the installation.
    That will wipe all data on the drive, though, so if you didn't make a backup before beginning the upgrade, you'll need to get your data off safely before proceeding. That may likely require the use of another Mac to access yours in Target Disc Mode.

  • Email send/receive suddenly doesn't work ; can't change email settings as BB phone won't accept valid username and password -- what to do?

    email send/receive suddenly doesn't work (as of September 24th); I can't change email settings (one suggestion from tech) as BB phone won't accept *valid* username and password -- what to do?
    I understand from a support note that if I keep trying my password/username combination, my BB will eventually delete all data!
    I can't understand this. I'm completely lost now. I can't remember what I've done or tried to do. A plethora of usernames and passwords is swimming in my head.
    Thanks for any hints. I have always loved this BB Bold and have never had any trouble with it.

    But the real question is why for the past year did the passwords work and then all of the sudden after this anomaly the disk password doesn't work?  I'm not 100% sure of what my configuration was, but I know that most of the time it required one password -- supervisor, and occasionally it asked for 2 -- disk password as well I believe.  This may have been related to the Password on Restart setting I think -- asking for the disk password on cold vs. warm boot.  But I know both were exactly the same.  But after this incident only the Supervisor password worked.

  • I can create an action but the droplet doesn't do anything when I drop a file on it.  I am running Adobe Photoshop CC 2014 on a 64bit Windows7 PC.

    I can create an action but the droplet doesn't do anything when I drop a file on it.  I am running Adobe Photoshop CC 2014 on a 64 bit Windows7 PC.  I exactly followed the steps on a youtube video on how to create an action and how to create a droplet.

    Thanks for the reply, I tried that but i wasn't able to get it to work. I also tried to see if l could using the
    function functionName()
    and I was still unable to.
    Silkrooster wrote:
    I haven't tried it yet, so i could be way off. But since you assigned it to a variable I would say it won't do anything until to call that variable. I would assume there must be a show command or similar that is needed for it to display.
    My experience is with actionscript and javascript but still I lean towards basic. I don't feel comfortable enough to say I am any higher yet as more experience is needed in my opinion.
    So feel free to take my advice with a grain of salt.

  • I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    I'm trying to set up a dual monitor for my new iMac. I'm using a second display I used with my old G5. My iMac recognizes the second monitor but the monitor won't turn on. Power button doesn't do anything on the monitor itself.

    If it won't turn on then the monitor is dead (power supply?, video circuits?).  Not worth repairing.
    If you have a new iMac then it has thunderbolt.  So exactly what is that monitor you are trying to connect?  For TB you can connect a mini-displayport monitor.   Probably (not 100% sure with TB) can use dvi or vga too if you have the appropriate adapter.

Maybe you are looking for