Send velocity as a crescendo like breath?

I have some "light-master" power-strip-like things that allow you to control voltage sent to lights with midi. Basically you send it a note-on event 1-127 and the light is as dim or as bright as you hit the note. What I would really like to do is find a way to record long swells between the different lights. Stabbing lights on and off it very limited in effect. It seems like this should be fairly easy. I've played with breath and p-press and a bunch of things with no luck. Here is a link to the manual: http://postcoitus.us/pdf/LightMasterManual.pdf - I am not interested in DMX or anything that chases. My main purpose is to have the same event that triggers the musical notes, trigger the lights with no lag. Maybe I can record drawn out breath and rout it as pretend velocity? Or something of that nature.
"The Light Master is a MIDI device that responds to 4 types of commands: Program Change,
Control Change, Note On/Off, and Poly Aftertouch."
"Dimming is accomplished through the use of three MIDI commands: 'Note On', 'Poly
Aftertouch,' and 'Control Change'. A typical Light Master configuration would have the
Note On, Note Off, and Control Change modes enabled. Each mode has its benefits for
particular situations. For example, Control Change may facilitate the use of sliders, whereas
Note On/Off may provide ease when operating quick hits on keyboard keys or controller
buttons. The instructions provided are written using Control Change references, but Poly
Aftertouch and Note On modes may be substituted."
I couldn't really see the "instructions provided" anywhere in the Manual.
What I would really like to have happen, is to record a 16 bar note. Then go back and record me turning a knob over that to build the crescendo. When I move the velocity up and down with my mouse it is so smooth. I was able to do this with max msp in the past.
It seems so close... the note-on - and then it just needs to record velocity change.
If pitch and mod can send smooth transitinions of midi signal, how can I get velocity acting that way - or some other CC message taking it's place?
Any ideas? I will be sooo happy if I can get this working! Thanks!

The following has instructions: iTunes: Sending iTunes Gifts

Similar Messages

How to send mails to external maild like yahoo

I am using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
funtion module to send mails to internal office mail ids and working correctly .
Not the requirement changed . I need to send mail to external mail id like
per at the rateyahoo dot com also.
What can I do to send mail to external mailids like yahoo.
Do I need to use flag some thing ?
THANSK IN ADVANCE.

Hi,
Hi,
It is posible to send the mail to external address usign the above FM . But some configurations have to be maitnaied in SCOT Tcode for INT (Internet) ->SMTP protocal. we need to give the Mail Host and Mail Port all this information is usually done by the BASIS. Please approach them for these settings and try again with the FM. Here we have to configure it to Yahoo so that we can send the mail.
Regards
Lekha

HT5312 I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

I cant remember the answer to some questions and they blocked my account. I've been sending requests for them to send it to my mail like 20 times and nothing. What can I do?

Click here, phone Apple, and ask for the Account Security team.
(87657)

When I send a email I would like to have my photo and signature added at the end of my email. How do I add that?

When I send a email I would like to have my photo and signature added at the end of my email. How do I add that?

Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39]

HT4623 This really ***** that they sent out and update to the iPhone ISO6 and I can't send or receive pics! Being that its apple you would think they would know better than to send out a bad update like this! I'm paying for a service and I can even use it

This really ***** that they sent out and update to the iPhone ISO6 and I can't send or receive pics! Being that its apple you would think they would know better than to send out a bad update like this! I'm paying for a service and I can even use now!!! I'm very upset! Think about canceling my iPhone 5 order! This is terrible!

Wahhhhhhhhhh! Wahhhhhhhhhh!
Are you over your little tantrum now? Do you want help you would like to continue to act like a toddler?
If you want help, try telling us what happens when trying to send pics. Any errors?
If you want to whine... go somewhere else.

I keep getting a box that pops up that says this is embarrassing firefox has crashed send a report would you like to quit firefox? or restart firefox?

Every time i log into Firefox i get a box that pops up and says, This is embarrassing Firefox seemed to have crashed send a crash report would you like to quit Firefox or restart? then i restart Firefox i go to the website of my choice when i log out that box pops up again so annoying has been going on for days! and right after they updated can anyone please tell me what to do? obviously this is really pathetic that i have to get other peoples solutions instead of Firefox contacting me directly...

Well i tried the Microsoft Malware and everything is fine on this end and you are still crashing on me so with that said,i am giving you one more day to resolve this issue if i still get crashes from you i am sorry to say i will have to try another company as my browser and see if i have an issue with them if i don't,i will not be reinstalling Firefox again if i do,then it may be another issue so i will have to see but i have no Malware here but thank you for your response anyway...

Problem in workflow sending mails to external domains like yahoo,gmail etc.

hi
i have one probs in my workflow that when i am sending mail to an external id it is not going to gmail,yahoo or hotmail etc.
it is being send to a particular domain say XYZ
but outside it ,no mail is send
and error is coming that recepient is unknown
we have firewalls being placed on smtp
and each and every setting in SCOT has been checked thorughly
but still mail except to one domain is not going outside
i have came across the info that since SAP doesn have any user id authentication but SMTP does has ,so when mail is being send outside the mail sending is failed,one option could be to disable the authentication at SMTP but thats doesn come inside the policy of client
so i think there must be a way out in SAP to deal with this
please suggest how can i send the mails externally,i ahve checked each and every thing inside my SMTP configuration ,adress is defined as * here but still mail is being send to internal domain of the client in which i am working ,but not at all to the external domains like gmail,yahoo etc.
any help will be highly appreciated
best regards
ashish

Hi Ashish,
I think you will need to check with your exchange guys because probably the exchange server will not relay the messages form the SAP server to external e-mail domains.
Regards,
Martin

I can't gey yahoo mail to send email- it says something like not connected to server?

I Cannot get yahoo mail to send emails. I wonder what step I missed during the sort up process?

Howdy msmantila,
It sounds like you cannot check your Yahoo email on the iPad. I would recommend the troubleshooting in the following article to help get that resolved, named:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Tap Safari and load a webpage. If you can load a webpage, then your device has Internet access. If you can't load a webpage, check your Wi-Fi connection or try a different Internet connection:
Try a different Wi-Fi connection.
If your iOS device has an active cellular data plan, tap Settings > Wi-Fi and turn off Wi-Fi.
If the affected email account is provided by your Internet provider, see if your issue is resolved while connected to your home Wi-Fi network.*
Log in to your email provider's website to make sure that the account is active and the password is correct.
Make sure your settings are correct using Mail Settings Lookup.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
Thank you for using Apple Support Communities.
Cheers,
Sterling

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy phone but the person cannot receive them; however, I can send them and it sounds like they are sent, but are not received. I can get them from a galaxy.

This relates to an earlier question I asked: I have an iPhone and can send messages to a galaxy, but the person cannot receive them; however, I can receive messages from the galaxy. I have only had an iPhone so the problem does not relate to a change in phones. Up until about 1month ago I could send to the galaxy and they could be read. Help!

Hi there nancyfrompilot mountain,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Back up and restore your iPhone as new.
-Griff W.

Send multiple strings over TCP - Like messenger service

Hello all Java Coders,
I'm new with TCP programming.
I'm beggining to learn about TCP and sockets connections in Java. In order to achieve this, I was coding a mini-program so I can learn a little bit about this.
I'm trying to make a simple TCP program.
The server sends a string to a client...
I already searched for a couple of hours in google and so on, about what I'm doing wrong.
[The server code (Just click)|http://pastebin.com/m39fd1273]
[The client code (Just click)|http://pastebin.com/m57471803]
I hope that someone can help me with this and, if you have patience, please tell me the reasons my code doesn't work.
Many thanks,
Freiheitpt
P.S.: I think that the problem is on the server side...

Sorry jverd.
I was just trying to put things organized.
Well, I can't get the String to be sent to the client.
No error occurs.
Server:
       try {
            srvr = new ServerSocket(1234);
            System.out.println("Connecting...");
            skt = srvr.accept();
            System.out.println("Connected!\nPreparing data exchange...");
            stream = skt.getOutputStream();
            out = new PrintWriter(stream, true);
            System.out.println("Done!\nReady to Send!");
        } catch (IOException ex) {
            System.out.println("Ups, didn't work!");
            System.exit(1);
        while(!data.equalsIgnoreCase("end")) {
            System.out.print("String to send: ");
            data = input.nextLine();
            System.out.print("Sending string: '" + data + "'\n");
            out.print(data);
        }Client:
        try {
            skt = new Socket("localhost", 1234);
            System.out.println("Connecting...");
            if (skt.isConnected()) {
                System.out.println("Connected!\nPreparing data exchange...");
                stream = skt.getInputStream();
                inputStream = new InputStreamReader(stream);
                in = new BufferedReader(inputStream);
                System.out.println("Done!\nReady to Receive!");
            } else {
                System.out.println("Server not available!\nExiting...");
                skt.close();
                System.exit(1);
        } catch (IOException ex) {
            System.out.println("Ups, didn't work!");
            System.exit(1);
        while (!data.equalsIgnoreCase("end")) {
            while(!in.ready()) {}
            data = in.readLine();
            System.out.println("Received String: '" + data + "'");
        }

If i want to encrypt a message that i send to Java Card applet like DES

What are the steps that i have to do ?? is there something missing??
//set the private key
private byte[] KeyData = {0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29,
           0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38,0x39, 0x40};
deskey = (DESKey)KeyBuilder.buildKey(KeyBuilder.TYPE_DES_TRANSIENT_DESELECT,
KeyBuilder.LENGTH_DES, false);
deskey.setKey(KeyData, (short)0);
//InData and OutData are two byte variables for the input message and the //Output message
Cipher cipher;
cipher = Cipher.getInstance(Cipher.ALG_DES_CBC_NOPAD ,false);
cipher.init(deskey, Cipher.MODE_ENCRYPT);
cipher.doFinal((byte[])InData,(short) 0 , (short) InData.length,(byte[]) OutData,(short) 0);
is that correct? or needs something else?
if i set fixed size for Outdata byte i have to do Padding since i choose (ALG_DES_CBC_NOPAD) method??? in order to send the cipher back to host application Thru APDU command??
How big can the cipher become with the key i used if InData are byte[10]
Thanks in advance

I tried too many corrections and i still get unknown error
i tried this code this time
package gr.teiath.netlab.applets;
import javacard.framework.*;
import javacard.security.DESKey;
import javacard.security.KeyBuilder;
import javacardx.crypto.Cipher;
public class MedBooklet extends Applet {
     final static byte MedBooklet_CLA = (byte) 0xB0;
     // PIN relatives
     final static byte PIN_TRY_LIMIT = (byte) 0x03;
     final static byte MAX_PIN_SIZE = (byte) 0x04;
     OwnerPIN pin;
     //DES
     byte keyArray[] = {(byte)0x09,(byte)0x0e,(byte)0x0d,(byte)0x0c,(byte)0x0b,(byte)0x0a,(byte)0x09,(byte)0x08,
               (byte)0x09,(byte)0x0e,(byte)0x0d,(byte)0x0c,(byte)0x0b,(byte)0x0a,(byte)0x09,(byte)0x08,
               (byte)0x09,(byte)0x0e,(byte)0x0d,(byte)0x0c,(byte)0x0b,(byte)0x0a,(byte)0x09,(byte)0x08};
     private byte[] outBuff;
     private short Lc;
     // allocate key object
     DESKey desKey;
     Cipher cipher;
     // Return codes
     final static short SW_VERIFICATION_FAILED = 0x6300;
     // INS commands
     final static byte VERIFY = (byte)0x20;
     final static byte ADDRECENTRY = (byte)0x30;
     final static byte READRECENTRY = (byte)0x40;
     //private RecipeFile recipeFile;
     //private ReferFile referFile;
     private MedBooklet(byte[] bArray, short bOffset, byte bLength) {
          pin = new OwnerPIN(PIN_TRY_LIMIT,MAX_PIN_SIZE);
          pin.update(bArray, bOffset, bLength);
          desKey = (DESKey)KeyBuilder.buildKey(KeyBuilder.TYPE_DES,KeyBuilder.LENGTH_DES,false);
          // set key value
          desKey.setKey(keyArray,(short)0x00);
          //recipeFile = new RecipeFile();
          //referFile = new ReferFile();
          register();
     public static void install(byte[] bArray, short bOffset, byte bLength) {
          new MedBooklet(bArray,bOffset,bLength);
     public boolean select() {
          if(pin.getTriesRemaining()==0) return false;
          return true;
     public void deselect() {
          pin.reset();
     public void process(APDU apdu) {
          byte[] buffer = apdu.getBuffer();
          if ((buffer[ISO7816.OFFSET_CLA]==0) && (buffer[ISO7816.OFFSET_INS])== (byte) 0xa4) return;
          if (buffer[ISO7816.OFFSET_CLA]!=MedBooklet_CLA)
               ISOException.throwIt(ISO7816.SW_CLA_NOT_SUPPORTED);
          switch (buffer[ISO7816.OFFSET_INS]) {
          case ADDRECENTRY: addrec(apdu);
               return;
          case READRECENTRY: readrec(apdu);
               return;
          case VERIFY: verify(apdu);
               return;
     public void addrec(APDU apdu){
          //byte[] buffer = apdu.getBuffer();
          //byte byteRead = (byte) (apdu.setIncomingAndReceive());
          //if (byteRead==0x1f)
               //recipeFile.newRecord(buffer, ISO7816.OFFSET_CDATA, (short) byteRead);
//           create cipher instance
          cipher = Cipher.getInstance(Cipher.ALG_DES_ECB_NOPAD,false);
          byte[] buf = apdu.getBuffer();
          Lc = (short) (buf[ISO7816.OFFSET_LC] & 0x00FF);
          //     array storing output buffer
          outBuff = new byte[Lc];
          // initialize cipher
          cipher.init(desKey,Cipher.MODE_ENCRYPT);
          Lc = cipher.doFinal(buf,(short)ISO7816.OFFSET_CDATA,Lc,outBuff,(short)0x00);
          // set output to be returned with same size of the input
          apdu.setOutgoing();
          apdu.setOutgoingLength(Lc);
          apdu.sendBytesLong(outBuff,(short)0x00,Lc);
     public void readrec(APDU apdu) {
          byte[] buffer = apdu.getBuffer();
          short le = apdu.setOutgoing();
        apdu.setOutgoingLength( (short) (35) );
        // echo header
        //apdu.sendBytes( (short)0, (short) 5);
        // echo data
       // apdu.sendBytesLong( recipeFile.getRecord() , (short) 0, (short) 35 );
     private void verify(APDU apdu) {
          byte[] buffer = apdu.getBuffer();
          byte byteRead = (byte) (apdu.setIncomingAndReceive());
          if (pin.check(buffer, ISO7816.OFFSET_CDATA, byteRead)== false)
               ISOException.throwIt(SW_VERIFICATION_FAILED);
}I have another Problem When in constructor i try to
cipher = Cipher.getInstance(Cipher.ALG_DES_ECB_NOPAD,false);I cant veriry the PIN so i always get exit command are there conflicts when are in the same constructor between
pin.update(bArray, bOffset, bLength);
VS
cipher = Cipher.getInstance(Cipher.ALG_DES_ECB_NOPAD,false);
VS
register();Are there Limitations about "Cref" do i have to send the data to be encrypted no more than byte of 8 hex ?

HT1688 My iPhone accepts messages from a straight talk phone, when sending a text it looks like it goes through but never appears on the straight talk phone

My iPhone accepts messages from a straight talk phone, when sending a text it goes through on my end but never appears on the straight talk phone. I'm having to use a secondary app that allows me to send a message that actually appears on the straight talk phone. I now have the iPhone 5 thinking it would fix the problem but it did not, and now that I have the 4G LTE it uses up my internet in a second.

The iPad doesn't do SMS text messges which are necessary to send messges to a regular phone.

Is it posible send email to distribution list like group of mails

Hi ,
i need to know if its possible to send email to distribution list via SAP
please let me know the process or program to do so or how to develop it? let me know if its possible by sap or not?
regards
ARORA

Agree with Zarko. But when you add contact for that external user and allow only that sender, the DL will not receive emails from any other users (internal or external).
If you added any entries under "Accept mesages only from Only sendes in below list" then only the entries added will be able to send mail to that DL whether the check box "Require that all senders are authenticated" is selected or not. You may check the
below technet article for more details.
http://technet.microsoft.com/en-us/library/bb124405(EXCHG.80).aspx

Sending email using mail that looks like a web page

I want to send an email that looks like a web page (kind of like those emails from apple or other companies). I tried making a document in Pages, but then that didn't quite work. Of course, I could make the pages document into a pdf file, but that's not ideal. Any recommended application?

Check Composing HTML messages in Apple Mail.

I have an iPad 2 and I was wondering if you could/if you can send music by via Bluetooth just like an android is it possible?

CAn you send music or other files like that by Bluetooth from one apple device to another?

Not possible. Bluetooth in iOS does not support file transfer.
Bluetooth is supported for stereo headsets/speakers, handsfree
telephone devices/headsets, some keyboards, some peer-to-peer
apps from the app store and internet tethering where provided
by the carrier. Other than this it will not connect to a
phone/computer/device. (thanks to ckuan for the wording)

Send velocity as a crescendo like breath?

Similar Messages

Maybe you are looking for