Send video signal to tv

I just got the component AV cable but not sure i know how to send the video signal from the iPad to the TV.

Easiest way to do this now is with apple tv

Similar Messages

Sending video signal to television

Is there a wireless solution to send a video signal from my mac pro to a tv monitor?

http://www.apple.com/appletv/

How do you set up your iPhone to send video signal to a TV. Is it done automatically?

Is the phone automatically set to send video through a docking station into the receiver and into the TV?

You need an Apple TV to do this. If you have one, play a video on your iPhone. Next to the three control buttons will be an icon that looks like a rectangle with a solid triangle in front of it (kind of like an upside-down envelope). Press it. The video will play on your TV. You can do this with videos and many games, as well as your music. For games and music:
Press the home button twice to get the app tray to appear
Swipe the tray all the way to the left to where you see the music icon and controls.
Besides the play controls and music icon there will be another icon that looks kind of like an upside-down envelope. Press it. The video will start playing over the Apple TV.
Good luck!

Setting iPad air to send video signal to TV

I want to watch internet video on TV... How do I set iPad air to send imput signal

You need either an Apple Tv, or a Digiata Av adpater and an HDMI cable.
Do you have one of these?

How can I get my 2010 mac book pro to send signal out through the mini display port? end signal out through the end video signal out through the

How can I get my 2010 macbook pro to send signal out through the mini display port?

First, what you said is contradictory. You say "can't get a video signal", then say"the Mac wallpaper is broadcast, the mouse pointer is visible". "No video signal" means an absolutely black,blank screen. It sounds like you have plenty of signal.
I am supposing what you are seeing is actually a blank desktop, which is to be expected if your settings are such that you are extending the desktop, instead of mirroring it.
Within the preference panes is a setting that allows you to change this. Open System Preferences, click Displays, and then click Arrangement. You will see that you are extending the desktop. Change that setting.

HT4108 How can I set my i phone to send a video signal to my television?

How can I set my I phone to send a video signal to my television?

iphone's earlier then iphone4s don't support mirror so only apps which support the old tv out works like photo app and youtube and video app
composite being the worst resolution tv output out there does not support airplay mirror even with iphone4s
test with the supported apps

How do I "send a video signal out to my tv" on an iPhone?

How do I "send a video signal out to my tv" on an iPhone?

I tried exactly this but it didn't work. I was able to get to the TV out and set it but no video came out. I have an iPhone 4 with IOS 6 and bought the cables from Apple. Any other ideas? I can plug a vcr or dvd into the same video inputs on the tv and that works fine.
Thanks,
Bob

Keynote video signal drops out

Keynote 4 video signal drops out during presentations where we are switching between two different Apple Computers (one G4 and one Intel). Both machines had previous versions of Keynote on them and over a period of time never had a signal drop out condition. Sounds like new version problem.
Any input appreciated.

I have two laptops each with their video out adapter connected and then cabled to a switch box where the big monitors project the signal of the laptop that the swtich box is set to. Like channel selection. Previous versions of Keynote were never a problem and I mean never. The signal came right through but now with Keynote 4 the signal drops out even tho the laptop is still active and apparently sending a signal through its video out connection. I have to hit escape and get out of keynote and then go back to PLAY for keynote to once again send that signal.

I have a power mac G5, when starting up doesnt send no signal to the screen at all

My name is Emilio1991 and I have problems starting it up, I hit the power button and it start great but it have a problem it doesnt send not signal to the screen at all, I thought it was the video card and buyed a new one and it still with thet same problem I try to find solutios and nothing about that can some one help me with that/???

Couple of more ideas...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Continous streaming of video signal on to PDA using TCP/IP?

Hardware :IMAQ PCI 1411
Software :labview PDA module, labview 7.0,7.1.8.0, Labview pocket pc 2002
can i have continous video image on my PDA , image Acquired by the host PC using 802.11g wrelessTCP/IP protocol.( that is continous video streaming on to my PDA device.) I am developing an application to transfer video signals to my pda.I would define my application
I am developing robot having camera on it. my idea is to tranmit video image acquired by camera on host ( i.e robot ) to my PDA using wifi TCP/IP Protocol. i am able to control robot motion from pda using Daq pci-6229 on host.
Thanks in advance.
murari.

I think the only way this would be possible in LV was if you convert the images to the LV picture format, flatten that to a string, send the string over and unflatten it and write it to a picture indicator.
There are several potential problems:
1. 7.0 was the first version of the PDA module. I don't remember how much support it has for the picture control, although I believe it should have enough. The newest version is 8.0, which was just released.
2. Depending on the size of the picture, this can be a lot of data. Since you have a g connection, that should be less of a problem, but it still may be an issue, depending on your frame rate. I once wrote a VI which recognized which parts of an image were changed and used a special (very primitive) protocol to send the data to the PDA (I was thinking of a cellular connection and wanted to minimize the amount of data), but I did that for the LV interface, which was mostly static, and I only detected that when it changed.
3. PDAs have significantly less processor power than a PC. Depending on your frame rate, this may be hard for the PDA.
4. The PDA module only supports 8 bit color, and that will require you to do additional computation to make the picture look normal. 8 introduced 16 bit support.
The upside is that writing the code for converting, sending, receiving and displaying the data is very very simple (assuming you can get it into the picture control format, not IMAQ, which isn't supported as far as I know). Just have a loop run on the computer side which will "acquire" the frame, flatten and send it, and another on the PDA side which will receive, unflatten and display. I think on the PDA side you will have to update the picture pixel by pixel.
Try to take over the world!

Unsupported Video Signal Help

I'm trying to set up and old Nintendo to my TV. It doesn't have regular AV cable ports, but it has composite cable ports. There is no input as 'AV', but it gas this thing called 'ColorStream HD'. I've tried to set it up through that, but the screen says 'Unsupported Video Signal'. I've tried to set it up with my Wii with the AV cables and it worked, but its like a black and white screen with little to no sound. So the video for the Wii works, but not my NES. Is there something that I'm doing wrong, or is my old console too old to be supported by new TV?

It won't work. ColorStream HD is expecting a HD signal of at least 480p and you're trying to send an SD signal from a composite output. You will have to try to find some type of adapter instead, perhaps like this:
http://www.amazon.com/Tmvel-HDMI2RCACVS-Composite-Converter-Blue-Ray/dp/B009A6PJKQ/ref=sr_1_1?ie=UTF...
Here's a little more info on ColorStream:
http://www.ehow.com/info_8695466_hdmi-vs-colorstream.html

Airplay video signal drops

We have 7 Apple TV's throughout our company and all of them exhibit the same behaviour, on many different laptops.
All laptops are running minimum of OS 10.9.2.
We have a Cisco Clean Air WiFi network with excellent signal coverage in all areas surrounding each of the AirPlay devices.
Here's exactly what happens:
User will enter conference room with Apple TV connected to an LED Flat Panel TV. Power it up, then select the appropriate Airplay device from their Airplay menu and begin streaming mirroring their desktop to the television set. Within 2 minutes, the signal drops, forcing the user to re-select the airplay device once again. Usually it will drop again within 2 minutes.
If the user reboots the Apple TV, the issue will go away for the rest of the session. Perhaps something about the Apple TV's keeping a sustained connection to our WiFi network.
We've been working with Cisco to pour over our WiFi network but they cannot find anything from the WiFi gear that is contributing to the signal loss.
Anyone have any ideas here? I'd like to try an Apple TV alternative to see if a different device would have the same issue but the options seem extremely limited.
Thank you.

I have two laptops each with their video out adapter connected and then cabled to a switch box where the big monitors project the signal of the laptop that the swtich box is set to. Like channel selection. Previous versions of Keynote were never a problem and I mean never. The signal came right through but now with Keynote 4 the signal drops out even tho the laptop is still active and apparently sending a signal through its video out connection. I have to hit escape and get out of keynote and then go back to PLAY for keynote to once again send that signal.

Sending video stream to another network through vpn

Hello,
Am christopher from TANZANIA (EAST AFRICAN COUNTRY).
Please help me.
we have our cable tv and we want to stream it to our another office in another region, where we have configured a VPN in this two offices using cisco router RV180. I have tried multicast IP but didn't work.
Please help me how do i send this video signal to another region with our VPN connection. the video is through/output in UDP.
Any advice please.

The problem is routing that multicast IP to another network through VPN, and am using RV180 CISCO ROUTER.

I'm having trouble sending videos on iMessage

I'm it sure if anyone has had this problem before but when I'm sending a video to someone it keeps saying sending for a long time then it says "not delivered" I never had this problem before. I reseted my network,signed out of iMessage and logged back in,turned off the wifi,and deleted my messages. I have a string internet signal. I'm using and iPod touch 5g IOS 7.1. Is there anything I could do to resolve this issue. I can send videos to anyone in my contacts except for one person.
Thanks bye!

iOS: Troubleshooting Messages
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Can't send videos

Windows phone app running on WP 8.1 videos go almost immediately to "Not sent" and become blank. I can receive from others running Android version just fine.

I can recieve videos just fine, but I cannot send videos. When I make a video it will show that it is sending, but after a few seconds it will say "not sent" and will not send. So far, to trouble shoot, I have: Powercycled my phone; Uninstalled Skype Qik then reinstalled it; Verified that I have the latest version of Window's Phone 8.1; Verified my data plan (which is unlimited); Verified my signal strength; and tried to resend while connected to a WIFI.
I have read that Skype Qik is having certain issues with people that have a lot of contacts. Is this related and when can we expect a fix?
Some Additional Information:
Model: Samsung ATIV S Neo (Samsung SPH I800)
Carrier: Sprint
Software: Windows Phone 8.1 Update
OS Version: 8.10.14176.243 (The most current as of this posting)
Firmware Revision Number: 2216.14.01.2
Hardware Revision Number: 3.19.1.0
Radio Software Version: 1621.14.1.2
Radio Hardware Version: 0.0.0.7
BootLoader Version: 13.07.12.14
Chip SOC Version: 2.0.15

Send video signal to tv

Similar Messages

Maybe you are looking for