Send workflow/ email notifications after changing email from log etc.

Hi All,
In our production system there was wrong email id in IT105 and so Work flow notification was sent to wrong email. Is there any way where I can change the email ID in the WF log and resend the workflow notification to the right emaployee from backend. Appreciate your time.
Thanks.

Hi
You cannot change the mail id from the log once the workflow is completed. You have come from the 1st. From SOST you cannot change the email id and resend it.
Regards
vijay

Similar Messages

How to send only email from workflow

Hi Guys,
I want to send an email from a workflow without sending a notification ... how do i do it ?
Thanks In advance
Tom.

Hi,
Two possible ways - neither of which I would recommend.
1 - Write a trigger on the WF_NOTIFICATIONS table, so that if the notification for the process that you require is sent, then you populate the mailer status column to 'spoof' the mailer into thinking that it has already sent it. That should suppress the email.
2 - Modify the flow to include an activity prior to the notification to change the recipient preferences to not receive email, send the notification, then change the preferences back.
Email is an "all or nothing" solution - either get email from everything, or get it from nothing. How are they planning on dealing with the notification that they are sent? If they are logging into the application to view the notification, then you could consider sending summary notification emails, and force the users to log into the application to view them all, rather than trying to adopt a half-and-half solution where some things come by email and some only come in the application.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

Need to send HTML email from Workflow : problem with sender

Hi all,
i need to send HTML email from my Workflow. I did it but i have a problem with the sender. The sender of email is always the agent responsible of workitem, and i don't want the receiver can answer to sender. So i need to put a false email address like nosender.at.mycustomer.com.
Possible to do that ?
Thanks for your help.
Cheers

Hi rick
How to change the wf-batch to some other name as you mention in previous reply. Can you give some details of that. If i use the function module SO_NEW_DOCUMENT_ATT_SEND_API1 how to change the wf-batch name and if i use send mail step in my workflow how to change wf-batch name.
Regards
vijay

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?

My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.

In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here:

I have multiple email accounts in my iPhone. Before the 6.0 update... I could select what account to send from. Now it's a default. Do I have to go change the email default everytime I want to send an email from a different account?

I have multiple email accounts in my iPhone 4. Before the 6.0 update... I could select what account to send from each time. Now it's a default. Do I have to go change the email default setting everytime I want to send an email from a different account?

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

I changed my comcast password (on my iPhone) and now am having trouble sending out emails from my Mac

I changed my comcast password (on my phone) and now am having trouble sending out emails from my Mac.

Did you change the password on your Mac as well? Go to Mail / Preferences / Accounts and change it there too.

How can I send an email from Sharepoint Online using sandbox solution?

How can I send an email from Sharepoint Online using sandbox solution?
If possible I do not want to use workflow.
Is It possible to do it without using workflow?

hello Steven Andrews,
when any user sends a message using contact us page in SharePoint online.
1. We are inserting item in Contact Us List . - This is working fine
for anonymous users also. We have used Office365 anonymous codeplex wsp and it is working fine. Anonymous user is able to insert new record in the Contact Us List.
2. Once, new record is inserted in Contact Us list, we want to fire email notifying thanks to the user on his email id as well as to our company x person for notification of new inquiry.
We tried using Workflow having impersonation step for anonymous user but it is not working for Anonymous users. Workflow is able to sent the email if someone logged into system but not working for Anonymous user although workflow is getting started
but not able to send email although used Imperonsation step.
We are stuck into implementing second step.

HT1688 How do I send an email from my Iphone to a "group" that I have established in my Yahoo account

How do I send an email from my Iphone to a "group" that I have established in my Yahoo account?

So I have bought a couple of apps on my iphone and would like to transfer them to my itunes library, but not sure how.
iTunes > File > Transfer purchases
When I plug in my iphone and try and sync the two, I get a warning from itunes that everything on my iphone will be wiped and everything from my itunes library will be moved to it.
Have you changed the computer you are syncing with?

Sending encrypted emails from the iPad is not working

I can't get sending encrypted emails working on my iPad3 running iOS 8.0.2
Let me explain what I did:
1. I created S/MIME certificates for 2 email addresses on my iMac in Keychain Access. One email address exists only on the iMac the other only on the iPad.
2. I set "When using this certificate" to "Always Trust" in both certificates.
3. I exported 1 S/MIME certificate (p12) and installed it on the iPad. Then I deleted this certificate and its private&public keys in iMac Keychain Access
4. I exchanged public certificates between the 2 devices. I installed one certificate in iMac Keychain Access and the other in iPad/Settings/General/Profiles.
5. On the iMac in the iPad certificate I set "When using this certificate" to "Always Trust"
6. I tested whether I can send and receive signed and/or encrypted emails
Results:
1. From the iMac I can send signed and/or encrypted emails to the iPad.
    On the iPad I can read the encrypted emails. The signature is not trusted
2. On the iPad I can send signed messages to the iMac. On the iMac the signature is trusted.
    I cannot send encrypted emails from the iPad to the iMac. The iPad doesn't know about the public certificate in iPad/Settings/General/Profiles
So much for the straight forward part. Now it gets a bit more complicated and confusing.
1. I deleted the iMac certificate in the iPad/Settings/General/Profiles. Then in iPad Mail I opened the signed mail coming from the iMac.
    I viewed the untrusted certificate in Mail and installed it. From this point on all signed emails from the iMac are trusted.
    Strangely the by this method installed certificate doesn't appear in iPad/Settings/General/Profiles.
    Furthermore I still cannot send encrypted messages to the iMac. This certificate installation seems to be used only to check trust worthiness of the signature.
    Installing on top the iMac public certificate in iPad/Settings/General/Profiles doesn't enable to send encrypted messages from the iPad either.
To be sure that this problem relates to the iPad certificate management and is not related to an error by me I did the following:
1. I transferred a p12 file for a certificate that I created in my iMac to a PC running Windows7.
2. I transferred a p12 file plus its public key (.pem) that I created in my iMac to another iMac into Keychain Access. (I have not tested if the pem is needed).
3. On the other iMac and the PC I made sure that the certificates are trusted.
    On the PC that means in the Certificate Manager the p12 needs to be in the "Personal" folder and in the "Trusted Root Certification Authorities" folder.
    The public keys need to be in the "Trusted People" folder and the "Other People" folder. One can just copy/paste the certificates.
4. In both cases I deleted the certificate and public/private keys on my iMac.
5. I exchanged public certificates between the devices.
6. I tested exchanging signed and/or encrypted emails between my iMac and the PC and my iMac and the other iMac.
Result:
1. I can send signed and/or encrypted emails to the other iMac and the PC
2. The PC and the other iMac trust the signature from my iMac and can read the encrypted emails
3. My iMac can read encrypted emails from the PC and the other iMac
4. My iMac trusts emails with signatures from the PC and the other iMac.
Everything is working as it should.
After the above test I wanted to see whether I can set up encrypted email exchange between the iPad and the PC. Strangely iPad Mail recognized the public certificate from the PC installed in iPad/Settings/General/Profiles and allowed me to send an encrypted email to the PC. However, on the PC I was unable to read the encrypted email. And the other way around, encrypted emails send from the PC to the iPad cannot be read on the iPad.
My conclusion from all this testing is that iPad mail encryption is still "under construction".

I was able to resolve the above described problem to some degree. Setting up sending and receiving encrypted emails between iOS and OSX I have working.
What is still not working is reading encrypted emails on the iPad/iOS8 received from Windows 7 PC. And sending encrypted emails to Windows 7 PC.
The details about how I solved part of the problem are described here.

My wife and I have iPhones 4s,s. We also have an iPad. We share hue same email address. When I send an email from my phone or the iPad it looks as if it comes from my wife instead of me(her name comes up as the person who sent it) I want my name on the ma

My wife and I have a iPhone 4S each and an I pad. When I send a email from my phone and from my iPad her name comes up as the sender. We only have one contact email address and that is the way we warn to keep it.
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
Thanks

Rectory wrote:
Please can someone tell me how I can change this so when I send a mail from my phone and from the IPad that it reads from me.
You need a separate email address but you've already ruled out that solution.

Sending an email from within a program

Hi,
I am using SO_DOCUMENT_SEND_API1 to send an email from a program. Everything works fine, but the users don't want to see the popup message titled 'SAPconnect Send Process - List of Sent Objects'.
Is there anyway I can supress this message from the program, or is it a setting in SAPconnect?
Thanks
Lindy

If your are calling RSCONN01 after your function module then remove the submit of RSCONN01. This program will run scheduled every 1 to 5 minutes anyway as background job by the basis .
a®

Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts. I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

Hi Milrclan,
Thanks for contributing to the Apple Support Communities.
If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Best Regards,
Jeremy

Sending an Email from the app along with table data

Hi All,
I would like to send an email from my app. I tried to put in the field attachment SQL this query: select * from Table_Name where id = (select max(id) from Table_Name) but it did not work. It showed me this error:
1 error has occurred
Wrong number of columns selected in the SQL query. See Help of attribute for details.
I would like to send an email every time the user insert a row with that row in the email... How can I do that?
Thank You.

What I would suggest is the following:
Build an After Insert Trigger on the table in question. In this trigger build a string with ALL the columns that are being inserted into the table. Then you will need to build some local variable to submit your mail. You will send your e-mail via UTIL_SMTP mail, since you may NOT always being in an APEX application when the table is updated..
Ask away if you have more questions..
Thank you,
Tony Miller
Webster, TX
I am a Ranger! We walk in the dark places no others will enter! We stand on the bridge and no one may pass! We live for the One, we die for the One!
If this question is answered, please mark the thread as closed and assign points where earned..

Send workflow/ email notifications after changing email from log etc.

Similar Messages

Maybe you are looking for