Send XML as acknowledgment from BPM

Hi Experts
I have scenario where our XI box will receive an XML, so whenever we receive an XML XI should send back another XML as an Acknowledgment. Is there any way I can send an custom XML format as an acknowledgment?
In BPM Send step I could see an Aknowledgment option but there I didnt find any option where I can specify the XML which I want to send as an Aknowledgment.
Is it possible to do this in XI?
Can anyone please let me know If I send a normal Aknowledgment for the request how that format looks like.
Please Help Us.
Regards
Sowmya.

sorry wrong forum

Similar Messages

XI acknowledge from BPM

HI Experts,
Trying to make acknowledge from XI to R/3 through BPM but get error message Unable to convert the sender service <BPM_Process> to an ALE logical. The XI process flow is from SAP with Idoc to XI BPM and to JDBC. Have check setting in Adapter specific identifier which has logical system. Could experts have same experience before, please advice?
Thanks in advance.
Katjun

Hey,
Have you maintained all the ALE setting from R/3 to XI > and the Port on Idoc Adapter IDX1 >? Once try to specify Adapter Specific identifier to the bpm process .
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

Send XML by HTTP from ext. System to XI and process

Hi XI Experts,
I want to configure a typical XI Scenario. Send XML by HTTP to XI. I know the URL, to send data to my XI test machine.
I'm struggling with the HTTP Parameters and the necessary Configuration in the Integration Directory. In the URL I have to provide for our XI 3.0 machine
service
namespace
interface
Namespace and interface is clear to me, but not the "Service". I know, that the "Service" could be an SLD Business System. In my scenario I don't want to configure all potential senders (e.g. customers) as a business system.
I want to have a "partner" in the Directory. There are partner services and services without a partner. Does someone can provide me the configuration steps. At minimum so that I receive the XI message in the integration engine.
Routing and mapping I will configure. But at the moment I really don't know how to configure the "Service", if I want to use a "Partner" as sender, and not a business system.
Thanks in advance
Klaus
P.S. My configuration scenario is a purchase order from a customer (in XML), which I want to transfer to an R/3 Backend to create a sales order.

Hi Klaus,
Check this SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64db4daf9f30b4e10000000a11466f/frameset.htm
In the Service , either you can have Business System created in the SLD or you can create your Own Business Service in the Directory. So create the service and go continue further.
For creating a Party services
This blog may give some hints-/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
Regards,
Moorthy

Missing sender information in message from BPM send step

Hi All,
I am testing a scenario uses Integration Process. This Integration process sends out a async message from deadline branch, but this message has empty sender service.
Am I missing something in configuration? Please let me know how can i configure it.
Regards,

Hi,
I chk my RD, ID and Receiver agreement and everything seems to be good.
My Integration process bellow,
1-Receive Step
2-Send Step(with ACK)
3-Deadline Brach(includes a Tranformation step and then it sends out a async message).
This message that sends the tranformation step, is missing the sender service information.
Is important that you know, that this tranformation step, have an empty message as source message.
I fill the target message with constant values and then send it with a send step.
I have tested the IM and it worked fine.
Regards,

How to send xml to javascript from flex?

Hello,
I am using Flex Builder......I read blogs and wonderful tutorials on adobe website. But I found that I can only have data from Flex to script placed within main.template.html file.....when i tried to get same data by in my other .html or .aspx page, it did not work. Another thing I noticed in following tutorial
http://blog.flexexamples.com/2008/03/09/calling-javascript-functions-from-your-flex-applic ations-using-the-externalinterface-api/
is that we placed <iframe> in our html page to host flex object instead of using <object> tag etc.
Please just let me know how to do very same thing as defined in tutorial but by hosting out flex object using <object><embed> tags etc and how to get data into our .html or .aspx page rather putting javascript (to receive data) in main.template.html file generated by Flex Builder...???

Thanks for replying,
Now I am facing another problem....I have added a script tag in index.template.html file that also contains other useful code used in my aspx page. I wanted to have that reply on my aspx page. So I placed all the script in a Core.js file and also the recieving method from flex in same Core.js file. I thought this way i will be able to access data coming from flex project to my aspx page. But something strange is happening, when i run .html file in bin-debug folder it fires receiving method placed in Core.js........but when I host that flex project .html file in my aspx page, it is not firing method. And also not firing when I run .html in bin-release folder....what am I doing wrong?

BPM Studio Task Send XML to Client Actions

After I do the Send XML to Client from the exeucte tab of an action...instead of
marking the task as done on the call back actions...i try to mark the same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Send XML to client: message box

Hi,
In a BPM workflow I'm putting together, I need to open a message box for information
(title, message, OK button). In the documentation, I found that I should send
an XML document to a client that looks like this:
<message-box title="title" style="information" options="ok">
<actionid>"1013679664318"</actionid>
</message-box>
Which I did: I added a "Send XML to client" action in the "True" part of a decision
node with a message-box element and its attributes, and actionid as a nested element.
When I trigger the workflow, it goes through all the expected steps but the window
does not pop up at all. I could not find the reason why anywhere. So has anyone
experienced the same problem ? If yes, how did you solve it ?
Cheers,
Yann

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Struggling with Send XML to client

Hi,
I am using WL Process Integrator 2.1 with WL 6.1.
I am trying to do do an example of the "Client Call Addin Response DTD" i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc. (as per the Client Callin Request DTD) and attached to ActionSendXMLToClient
event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm>
</call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is when I run from Worklist (Swing client program),
it errors out saying it cannot find this
class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a Business
Operation from Studio, I can locate this Java class. So, I am
not sure what is missing. The strange part is when I run from the
Worklist JSP page, it errors out saying :
"Cannot execute this task, because it is already done." The task
is not yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks,
SLN

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Send XML over Sockets

I am beginning and I need to send XML formatted data from Swing Client to Server for parsing/processing/and response.
There are no web server available to use. I think its best to use socket connection, but how do I send xml data over socket, and how do I receive it from server and parse it?
I have read and cannot find a similar example.

Xerces has DOMSerializer which can be used to serialize a Document object to a string. Once it's a string it's trivial to transmit over a socket connection. On the other side, to parse it, you'll have to create a StringReader for the received string and then an InputSource from the StringReader. You'll then be able to pass the InputSource to the DocumentBuilder.parse( ) method to generate a Document on the receiving side.
Hope that helps,
- Jesse

PO Acknowledgement from SUS

Hi all,
I am implementing MM-SUS scenario. I have replicated the vendor and I am able to send PO and change POs to SUS. When I try to send the PO Acknowledgement from SUS, I get the following error: "HTTP_RESP_STATUS_CODE_NOT_OK". Any ideas on how to resolve this error.
Thanks
Venkat

Vendor Acknowledgment can be used with Confirmations Concept
After Receiving PO, Vendor will notify you acknowledgment through mail/phone/ some other source.
Then, in ME22N, In the Item Details, Confirmations Tab (BELOW),
You Acknowledge the materials,...
Then only system will allow you to do GR in MIGO.
You have to activate Confirmations In SPRO,and Vendor Master data
Edited by: Anand K on May 1, 2008 3:17 PM

BPM Send step and acknowledge application.

Hi All,
with this url
http://help.sap.com/saphelp_nw70/helpdata/EN/43/65ce41ae343e2be10000000a1553f6/frameset.htm
I understand that we can define application for acknowledgment from SEND Step in BPM. and this acknowledge will can let me know document as I sent to R3 that posting success or not. But when I try configure with this param. I see only waiting acknowledgement in SXMB_MONI. So how I can to configure this param. Do I have to config someting on R3 side or not?
Thanks and Regards
Park

Ricardo,
You would not believe me but I had the same requirement a year back.
Infact I ended up posting a thread on this on the XI forum,
Idoc Acknowledgements and Idoc Packaging
Answering your question in 2 phases,
1. R3 can send the AleAduit back to XI immediately. In the inbound processing code, all the R3 team would need to do is add the code to trigger the RBDSTATE report to trigger AleAudit to XI.
2. The problem with Correlation - Well, in your case as you are using Idoc Packaging , the solution 1 in my earlier thread would not do the trick. If you look in IDX5 in XI you will see that the Idoc Packaging trigger multiple Idoc's from XI itself but again the problem is the correlation and for this there is no straight forward solution than having some custom field in the Idoc and in the corresponding response.
But yeah overall your analysis was perfect. Idoc's are used for Asynch Communications and hence trying to achieve what we are acheiving is not always and necessarily the best solution. Proxies help in these cases, and if proxies are not possible then I guess RFC is the way to go.
Regards
Bhavesh

BPM: Send step with acknowledgment - Application

Hi folks,
Ive a simple BPM with receiver(sender file)->mapping->send(IDoc receiver). The Send step is configured with the option Acknowledge type -> Application. The scenario runs well, the IDoc is successfully processed, but my BPM remains waiting with the clock icon!!! Going to sxi_monitor, in the PE details is a step waiting for an event from R/3 with the message Waiting for an event SEND_OK_APPLICATION type CL_SWF_XI_MESSAGE. It seams waiting for an event that R/3 didnt send Did I miss some steps at R/3?
The idea is to receive an ack after my IDoc is successfully processed at R/3, in order to finish the BPM.
Regarding Acknowledgment type -> Application, the sap help says:
Wait for Acknowledgement
Specify whether the send step is to wait for an acknowledgement. To receive an acknowledgement in the send step, the receiver (adapter, business system, and so on) must send the corresponding acknowledgment.
Application - Specifies that the message was processed successfully by the receiver application (for example, posted).
I guess it should works, but maybe I'm missing something. Anyone knows how to work with this kind of ack at ccBPM?
Thanks in advance,
Ricardo.
Edited by: Ricardo Quintino on Jan 21, 2008 4:33 PM

Ricardo,
You would not believe me but I had the same requirement a year back.
Infact I ended up posting a thread on this on the XI forum,
Idoc Acknowledgements and Idoc Packaging
Answering your question in 2 phases,
1. R3 can send the AleAduit back to XI immediately. In the inbound processing code, all the R3 team would need to do is add the code to trigger the RBDSTATE report to trigger AleAudit to XI.
2. The problem with Correlation - Well, in your case as you are using Idoc Packaging , the solution 1 in my earlier thread would not do the trick. If you look in IDX5 in XI you will see that the Idoc Packaging trigger multiple Idoc's from XI itself but again the problem is the correlation and for this there is no straight forward solution than having some custom field in the Idoc and in the corresponding response.
But yeah overall your analysis was perfect. Idoc's are used for Asynch Communications and hence trying to achieve what we are acheiving is not always and necessarily the best solution. Proxies help in these cases, and if proxies are not possible then I guess RFC is the way to go.
Regards
Bhavesh

Not receiving the output xml file from BPM

Hello
I am doing a scenario where I'd be sending two files in text format to the BPM workflow which would be using Fork and Correlation to merge these two files into one file and send the output xml file as receiver. Problem is that the two files are successfully converted into the xml messages and are displayed in SXMB_MONI but the output file which would be received from BPM engine as receiver is not being generated and displayed in SXMB_MONI as well as RWB. Please suggest any probable solution.
Thanks.

I don't think you can manipulate .ai files in Flex /
AIR.

Acknowledgement from receiver file Adapter with out BPM

Hi Gurus,
I am trying to get Acknowledgement from Receiver file Adapter with out Using BPM.
Here is the scenario. I am sending files from different Sender Adapters. There is only one target that is File Adapter. After each successfull and failure transaction I need an Acknowledgement that needs to trigger another receiver adapter and send the the file name and timestamp to that file.
Hope this is a complicated scenario. Please help me.
Thanks,
Kevin

from sap note 821267
6. Acknowledgements
    * Q: Does the File Adapter support acknowledgements?
    * A: You need to distinguish system acknowledgements (indicating that a message has been received by the target system) and application acknowledgements (indicating that the message has been successfully processed by the application on the receiver side).
           The receiver of an XI message will only send an acknowledgement back to the sender if the sender has requested one. However, the File Adapter has no functionality that relies on the receipt of an acknowledgement, so it never requests one.
           On the other hand, if a File Adapter Receiver receives a request to send an acknowledgement, it will do so for a system acknowledgement request. Application acknowledgements are not supported at all as the File Receiver has no way to determine if the written file has been correctly processed by the back-end application, which is what a positive application acknowledgement would imply.
this means that your requirement is ideally not possible without a BPM

BPM Send Step with acknowledgment: ID: sender agreement?

Hello everybody,
I have a send step in BPM and I expect a acknowledgement from the receiver.
Do I have to configure a sender agreement?
Thanks a lot
Regards Mario

mario,
I have tried to use a Sen Synchronous Step to a JDBC adapter from a BPM and it works fine.
<i>After changing the send step in BPM from async to sync with acknowledgement, I get not response message</i>.
When you select MODE as SEND SYNCHRONOUS in your Send Step, there is no option to Select ACKNOWLEDGEMENT.
When you select the MODE as SEND ASYNCHRNOUS , you can have acknowledgements.
But, as you are using a RECEIVER JDBC adapter , you need to have a SEND SYNCHRNOUS step that will get the response back from the JDBC adapter. This response will double up as Acknowledgemet.
You can surround this Send Synchrnous Step with an Exceptuion Handler to handle any exception that might occur.
Regards,
Bhavesh

Send XML as acknowledgment from BPM

Similar Messages

Maybe you are looking for