Send XML in a REST request

Hi experts,
How can i pass an xml to the body of a rest service request ?
The method if_http_client->request->set_data expects a xstring data type .
anybody knows how to trasfer an XML to xtring ? FM
Thanks.

How can i pass an xml to the body of a rest service request ?
The method if_http_client->request->set_data expects a xstring data type .
anybody knows how to trasfer an XML to xtring ? FM
Hi,
Use the following function module to convert XML to xstring
DATA: i_objbin type soli_tab,
i_objhex type solix_tab.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
IP_SOLITAB = i_objbin
IMPORTING
EP_SOLIXTAB = IT_OBJHEX .
Send XML data into i_objbin and convert to xsting

Similar Messages

Query regarding sending XML over HTTP Post request

Hello,
I am trying to send XML data from a server to client via HTTP Post request
And vice versa � receive the data by a client
Assume that the xml data looks something like
<?xml+version="1.0"?>
So my post query will look like
http://<IP Address>:<port>/
POST /MessageReceiver.jsp HTTP/1.0
Host: www.SomeHost.net
Content-Type: application/x-www-form-urlencoded
Content-Length: 38
%3C%3Fxml%2Bversion%3D%221.0%22%3F%3E+
This information will be received by the client and converted back to xml data.
My query is - is there some library/open-source stuff that
does the process of transcoding the entity's non-ASCII characters
at the server side
and decoding the URL back to human-readable form at the client side?
i.e. I need a simple mechanism to convert
<?xml+version="1.0"?>
to
%3C%3Fxml%2Bversion%3D%221.0%22%3F%3E+
at the server side, while sending data
and do the opposite at the client side to get the xml back.
Also could some one confirm if JTidy is a right tool to check if the xml is well-formed?
Or is there any other standard tool that checks for well-formed properties of xml?
regards,
Deepak.

java.net.URLEncoder / URLDecoder?
Also could some one confirm if JTidy is a right tool to check if the xml is well-formed?No, it's for parsing HTML. An XML parser is checking for well-formedness in any case.

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format

Is it possible to create a Webservice in BI which takes XML as an input and gives PDF as output with an additional requirement that Siebel expecting the XSD from BI to send data in the BI requested format. Siebel wants to send the data as xml to BI but not sure of the BI capabilities on giving WSDL embedded with XSD (input is a hierarchical)

Hi All,
I am able to fulfil above requirement. Now I am stuck at below point. Need your help!
Is there any way to UPDATE the XML file attached to a Data Definition (XML Publisher > Data Definition) using a standard package or procedure call or may be an API from backend? I am creating an XML dynamically and I want to attach it to its Data Definition programmatically using SQL.
Please let me know if there is any oracle functionality to do this.
If not, please let me know the standard directories on application/database server where the XML files attached to Data Definitions are stored.
For eg, /$APPL_TOP/ar/1.0/sql or something.
Regards,
Swapnil K.

Cannot send XML request message - TREX doesn't return FQDN

Hello all,
is there any way to configure TREX, so that it always returns it's FQDN?
I get the following error message from our SAP XECO (Shop) Java System.
Full Message Text
Object with category com.sap.isa.catalog.trex.TrexCatalogServerEngine could not be instantiated. Reason: cannot send XML request to http://saptx3:30305/TREX; reason: saptx3 (Errorcode 7262)
The problem is, that TREX doesn't return it's FQDN.
The TREX service as such is correctly configured in TREX Service "nameserver.address", "tcpip://hostname.domain:30301".
I added the line
SAPGLOBALHOST=saptx3.domain
to the sapprofile.ini file. This didn't do the trick, unfortunately.
Thanks a lot for your advice !
Best Rgs,
Thorsten

HI Thorsten,
Please ensure that your setting match that of note: 1479923 - TREX: Queue server missing in KM TREX Monitor
and also please check the following:
Also do you have any proxy or firwall between TREX and the portal?
It can to be that the problem is related to the proxy configuration in
the Portal. Could you please check if you specified proxy in the
System Administration -> System Configuration ->Service Configuration->
Applications (Content Catalog) -> com.sap.portal.ivs.httpservice ->
Services -> Proxy
If a proxy server is entered there, you have to enter the TREX host in
the http - bypass Proxy Servers.
many thanks
Orla.

How to send XML using UTL_HTTP

I am trying to workout how to send XML data to a webserver using UTL_HTTP but am not getting any reply
I need to submit the following XML document to a server "http://api.fastsms.co.uk/api/xmlapi.php" Their instructions are "The XML Document should be posted unencoded, with a UTF-8 character set as parameter 'xml'"
If I submit the following XML on their test form
<?xml version="1.0"?>
<apirequest version="1">
<user>
<username>**USER**</username>
<password>**PASSWORD**</password>
</user>
<application>
<name>Example Application</name>
<version>1.0</version>
</application>
<inboundcheck lastid="10711399"/>
</apirequest>
I get an XML response back with the messages in my inbox.
This is the code I am trying to use to accomplish the same from PL/SQL : I know a response is coming back as there is header information - just no content. What am I doing wrong ?
l_xml VARCHAR2(5000);
req utl_http.req;
resp utl_http.resp;
header_name VARCHAR2(256); -- Response header name
header_value VARCHAR2(1024); -- Response header value
response_text VARCHAR2(4000); -- Response body
l_url VARCHAR2(100);
BEGIN
l_xml := 'xml=<?xml version="1.0"?>';
l_xml := '<apirequest version="1">';
l_xml := '<user>';
l_xml := '<username>**USER**</username>';
l_xml := '<password>**PASSWORD**</password>';
l_xml := '</user>';
l_xml := '<application>';
l_xml := '<name>Example Application</name>';
l_xml := '<version>1.0</version>';
l_xml := '</application>';
l_xml := '<inboundcheck lastid="10711399"/>';
l_xml := '</apirequest>';
-- Open HTTP connection
l_url := 'http://api.fastsms.co.uk/api/xmlapi.php';
req := utl_http.begin_request(l_url,'POST',utl_http.HTTP_VERSION_1_1);
-- Set headers for type and length
utl_http.set_header(req,'Content-Type','application/x-www-form-urlencoded');
utl_http.set_header(req,'Content-Length',to_char(length(l_xml)));
-- Write parameter
utl_http.write_text(req,l_xml);
-- Read response file
resp := utl_http.get_response(req);
-- Print out the response headers
FOR i IN 1 .. utl_http.get_header_count(resp) LOOP
    utl_http.get_header(resp,i,header_name,header_value);
    logging_pkg.info(header_name || ': ' || header_value);
END LOOP;
-- Print out the response body
BEGIN
    LOOP
      utl_http.read_text(resp,response_text);
      logging_pkg.info(response_text);
    END LOOP;
EXCEPTION
    WHEN utl_http.end_of_body THEN
      logging_pkg.info('End of body');
END;
-- close http connection
utl_http.end_response(resp);
EXCEPTION
    WHEN utl_http.end_of_body THEN
      utl_http.end_response(resp);
END;
Cheers,
Brent

Hi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent

Struggling with Send XML to client

Hi,
I am using WL Process Integrator 2.1 with WL 6.1.
I am trying to do do an example of the "Client Call Addin Response DTD" i.e. pass
an XML document to an external java
program.
As given in docs :
http://e-docs.bea.com/wli/docs70/devclient/appa.htm#1120726
1. I have created a template definition
2. Defined a XML doc. (as per the Client Callin Request DTD) and attached to ActionSendXMLToClient
event as shown below.
<call-addin name="mywlpi.addinimpl" mode="async">
<actionid>959395846210</actionid>
<parm>itemNumber</parm>
</call-addin>
3. "mywlpi.addinimpl" is a java program I created
4. Now, the problem I run into is when I run from Worklist (Swing client program),
it errors out saying it cannot find this
class file:
ClassNotFoundException: mywlpi.AddInImpl
java.lang.ClassNotFoundException: mywlpi.AddInImpl
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
5. I have included the class file in a .jar and included in the
SVRCP of startWebLogic.cmd file. Also, when I create a Business
Operation from Studio, I can locate this Java class. So, I am
not sure what is missing. The strange part is when I run from the
Worklist JSP page, it errors out saying :
"Cannot execute this task, because it is already done." The task
is not yet done.
Is there someone who can help me here? Any suggestions
appreciated!!
Thanks,
SLN

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Send XML Message via HTTP and Receive Response

Hello,
We have a scenario where we need to update Currency Exchange Rates in R/3 via a 3rd party called Oanda. I'd like to use XI for this Interface, if possible.
Basically, we need to send XML over HTTP. Here's the URL and the XML we need to use for our POST (I'll need to perform the look-up for about 15 currency codes - I plan on using a BPM process to loop through each currency code specified in a flat file):
http://www.oanda.com/cgi-bin/fxml/fxml?fxmlrequest=<CONVERT><CLIENT_ID>TestAccount1</CLIENT_ID><EXCH>USD</EXCH><EXPR>CAD</EXPR><DATE>03/25/2008</DATE></CONVERT>
And the reponse looks like this:
<RESPONSE>
<EXPR>CAD</EXPR>
<EXCH>USD</EXCH>
<AMOUNT>1</AMOUNT>
<NPRICES>1</NPRICES>
<CONVERSION>
    <DATE>Mon, 24 Mar 2008 20:00:00 GMT</DATE>
    <ASK>1.0257</ASK>
    <BID>1.0251</BID>
</CONVERSION>
</RESPONSE>
I plan on mapping each reponse to BAPI_EXCHRATE_CREATEMULTIPLE, using BPM.
So my question is this: Should I use the HTTP adapter for the out going POST to Oanda? If so, would the HTTP adapter be consider the sender or the receiver? Also, how would the XML message be automatically appended to the end of the URL (i.e., after the fxmlrequest parameter)? I guess I'm a little confused on how to use the HTTP adapter... Are there any blogs that discuss this type of scenario?
Thanks,
Matt

Hi guys,
I have few concerns for setting up this scenario.
1). I have created a data type for request mapping, and teste the mapping.
The output looks like below:
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:MT_CONVERT xmlns:ns1="http://test.com/ExchngRate">
   <CONVERT>
     <CLIENT_ID>test</CLIENT_ID>
     <EXPR>CAD</EXPR>
     <EXCH>USD</EXCH>
     <DATE>10/21/2009</DATE>
     <AMOUNT>1</AMOUNT>
   </CONVERT>
</ns1:MT_CONVERT>
How to pass only
<CONVERT>
     <CLIENT_ID>test</CLIENT_ID>
     <EXPR>CAD</EXPR>
     <EXCH>USD</EXCH>
     <DATE>10/21/2009</DATE>
     <AMOUNT>1</AMOUNT>
   </CONVERT>
to the receiver HTTP adapter.
2) I am using URL address in the receiver HTTP adapter.
Target Host: www.oanda.com
Path Prefix: cgi-bin/fxml/fxml?fxmlrequest=
What is will be Service Number?
Looking forward for you help. Your help is greatly appreciated.
Thanks,
Namadev
Edited by: Namadev Chillal on Oct 21, 2009 5:35 PM

Incorrect MIME type for XML Data Connection POST requests

It appears that Xcelsius 2008u2019s XML Data Connection logic does not specify the correct MIME type for the data it sends to the server in its POST request. Using an HTTP debug proxy, I was able to see that Xcelsius sends XML data in the POST, but is setting a content-type of u201Cx-www-form-urlencodedu201D. According to the W3C spec:
http://www.w3.org/TR/html401/interact/forms.html#h-17.13.4.1
Data sent with a MIME type of u201Cxxu201D should be encoded as key?value pairs, like this:
key1=val1&key2=val2&Submit=Submit
So, what Xcelsius is doing is clearly incorrect. Worse, if your server process is a Java servlet, you may find that the POSTed data will be gobbled up by the servlet container and you wonu2019t be able to read it using a getInputStream(), or getReader() call because itu2019s already been processed by a call to the getParameter() method.
The correct mime type for POSTing an XML formatted request from Xcelsius should be "text/xml".
Wayne

Hi,
The Error #2032 your getting is due to the Flash player security.
To remove this this error you need one crossdomain Xml file in the root directory which actually provides a lot more control over who has access to your data from a SWF. The cross domain policy is attached as crossdomain.xml.
In the XML file, it is used a wildcard (*). This allows a SWF located on any machine to access your data source. You can certainly use an IP address or domain name to restrict access rather to opening it up completely. I always start with the wildcard to make sure my dashboard works, then start restricting access as necessary.
Here is a whitepaper with everything you need to know about Flash player security:
http://www.adobe.com/devnet/flashplayer/articles/flash_player_9_security.pdf
Please let me know if you need any more clarification.
Regards,
Sanjay

Send XML through JSP pages

Hi friends
I was wondering if it's possible to send XML data when a form button is pressed. Suppose we have in the client machine a browser displaying a HTML Form with one text inputtype and one button to send this information to the JSP Server. If the inputtype's name is 'user' it's easy to retrieve this information in the JSP component, just a request.getParameter("user") would work fine. But I want to send the text of the inputtype through XML. Something like :
<data>
<user>
smith
</user>
</data>
How could I tell the browser to send the information through XML ? Is it possible ? And how could I retrieve this XML data in the JSP component ?
Thanks a lot

What I have done is working with 'bare hands', I'll paste my simple code here:
This is my HTML page for colleting the info:
<html>
<head>
<title>Envio de XML</title>
</head>
<body>
<form action=http://remoteaddress:8080/Proyecto/xmlsend method=POST>
<BR>
<BR>Numero Movil
<input type=text name=numero>
<p>
<BR>Operadora
<input type=text name=operadora>
<p>
<BR>Mensaje
<input type=text name=mensaje>
<p>
<input type=submit value=Aceptar><input type=reset value=Limpiar>
</form>
</body>
</html>
And here it's my servlet code to process and convert it to XML:
import java.io.*;
public class xmlsender extends HttpServlet
public void service(HttpServletRequest req, HttpServletResponse res)
throws ServletException, IOException
ServletOutputStream salida = res.getOutputStream();
res.setContentType("text/xml");
String cadenanumero = req.getParameter("numero");
String cadenaoperadora = req.getParameter("operadora");
String cadenabody = req.getParameter("mensaje");
salida.println("<?xml version=\"1.0\" encoding=\"utf-8\"?>");
salida.println("<mensaje id=\"000001\" tipo=\"SMS\" fecha=\"2004-04-26T10:54:33\">");
salida.println("<numero>" + cadenanumero + "</numero>");
salida.println("<operadora>" + cadenaoperadora + "</operadora>");
salida.println("<body>" + cadenabody + "</body>");
salida.println("</mensaje>");
Don't know if this is what you want, but maybe it can at least illustrate you, I hope so.

Sending XML with URLLoader

I am at a loss.
I am trying to send XML using a URLLoader
when the request is sent via navigateToUrl i get the Post
data
but when using a Loader nothing.
Any help is appreciated.

Thanks for the replt ntsiii,
Heres the urlloader code
public function urltest(){
var request:URLRequest = new URLRequest("
http://localhost/mroi/testurl.php");
var variables:* = <test>test</test>;
request.method = URLRequestMethod.POST;
request.contentType = "text/xml";
request.data = <test>test</test>;
var loader:URLLoader = new URLLoader();
//loader.dataFormat = URLLoaderDataFormat.VARIABLES;
//navigateToURL(request);
loader.load(request);
As I mentioned in my earlier post I receive the data when
using the navigateToURL method but recieve nothing when using the
URLLoader
Any help is appreciated. I am at wits end

Send xml file from sap to third party url through https

Hi,
I have a requirement to send the xml file from ecc to a 3rd party url through HTTPS. How can we achieve this using ABAP.
Client doesn't have XI enviroment. The client has provided the 3rd party url where the file needs to be uploaded.
Please help ! <removed by moderator>
Thanks in advance.
Regards,
Chitra.K
Edited by: Thomas Zloch on Sep 12, 2011 12:58 PM

Hi Chitra,
I had similar requirement and here is what I did: -
REPORT Z_HTTP_POST_TEST_AMEY.
DATA: L_URL               TYPE                   STRING          ,
      L_PARAMS_STRING     TYPE                   STRING          ,
      L_HTTP_CLIENT       TYPE REF TO            IF_HTTP_CLIENT ,
      L_RESULT            TYPE                   STRING          ,
      L_STATUS_TEXT       TYPE                   STRING          ,
      L_HTTP_STATUS_CODE TYPE                   I               ,
      L_HTTP_LENGTH       TYPE                   I               ,
      L_PARAMS_XSTRING    TYPE                   XSTRING         ,
      L_XSTRING           TYPE                   XSTRING         ,
      L_IS_XML_TABLE      TYPE STANDARD TABLE OF SMUM_XMLTB      ,
      L_IS_RETURN         TYPE STANDARD TABLE OF BAPIRET2        ,
      L_OUT_TAB           TYPE STANDARD TABLE OF TBL1024
MOVE 'https://<hostname>/xxx/yyy/zzz' TO L_URL.
MOVE '<XML as string>' TO L_PARAMS_STRING.
*STEP-1 : CREATE HTTP CLIENT
CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL
    EXPORTING
      URL                = L_URL
    IMPORTING
      CLIENT             = L_HTTP_CLIENT
    EXCEPTIONS
      ARGUMENT_NOT_FOUND = 1
      PLUGIN_NOT_ACTIVE = 2
      INTERNAL_ERROR     = 3
      OTHERS             = 4 .
"STEP-2 : AUTHENTICATE HTTP CLIENT
CALL METHOD L_HTTP_CLIENT->AUTHENTICATE
EXPORTING
    USERNAME             = 'testUser'
    PASSWORD             = 'testPassword'.
"STEP-3 : SET HTTP HEADERS
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
      EXPORTING NAME = 'Accept'
                VALUE = 'text/xml'.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_HEADER_FIELD
    EXPORTING NAME = '~request_method'
               VALUE = 'POST' .
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_CONTENT_TYPE
    EXPORTING CONTENT_TYPE = 'text/xml' .
"SETTING REQUEST DATA FOR 'POST' METHOD
IF L_PARAMS_STRING IS NOT INITIAL.
   CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
     EXPORTING
         TEXT   = L_PARAMS_STRING
     IMPORTING
           BUFFER = L_PARAMS_XSTRING
     EXCEPTIONS
        FAILED = 1
        OTHERS = 2.
CALL METHOD L_HTTP_CLIENT->REQUEST->SET_DATA
    EXPORTING DATA = L_PARAMS_XSTRING .
ENDIF.
"STEP-4 : SEND HTTP REQUEST
CALL METHOD L_HTTP_CLIENT->SEND
    EXCEPTIONS
      HTTP_COMMUNICATION_FAILURE = 1
      HTTP_INVALID_STATE         = 2.
"STEP-5 : GET HTTP RESPONSE
    CALL METHOD L_HTTP_CLIENT->RECEIVE
      EXCEPTIONS
        HTTP_COMMUNICATION_FAILURE = 1
        HTTP_INVALID_STATE         = 2
        HTTP_PROCESSING_FAILED     = 3.
"STEP-6 : Read HTTP RETURN CODE
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_STATUS
    IMPORTING
      CODE = L_HTTP_STATUS_CODE
      REASON = L_STATUS_TEXT .
WRITE: / 'HTTP_STATUS_CODE = ',
          L_HTTP_STATUS_CODE,
         / 'STATUS_TEXT = ',
         L_STATUS_TEXT .
"STEP-7 : READ RESPONSE DATA
CALL METHOD L_HTTP_CLIENT->RESPONSE->GET_CDATA
        RECEIVING DATA = L_RESULT .
"STEP-8 : CLOSE CONNECTION
CALL METHOD L_HTTP_CLIENT->CLOSE
EXCEPTIONS
    HTTP_INVALID_STATE = 1
    OTHERS             = 2   .
"STEP-9 : PRINT OUTPUT TO FILE
CLEAR : L_XSTRING, L_OUT_TAB[].
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT   = L_RESULT
    IMPORTING
      BUFFER = L_XSTRING
    EXCEPTIONS
      FAILED = 1
      OTHERS = 2.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    BUFFER                = L_XSTRING
TABLES
    BINARY_TAB            = L_OUT_TAB .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   FILENAME                        = 'C:AMEYHTTP_POST_OUTPUT.xml'
TABLES
    DATA_TAB                        = L_OUT_TAB .
Also, following is the detailed link for use of HTTP_CLIENT class: -
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/1f/93163f9959a808e10000000a114084/content.htm
Also, in below link, you can ignore XI specific part and observe how its sending XML to external URL:-
(I know it describes call to SAP XI server's URL, but it can be used to call any URL)
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc
In addition to all above, following configs to be present at ABAP application server: -
1. The hostname used to URL should be present in SAP ABAP application server's 'hosts' file.
2. Security certificate (if available) for URL to be called must be installed in SAP ABAP application server.
Let me know if you achieve any progress with it...

Processing the multiple sender xml one by one in a time gap to RFC

Dear Experts,
I have to process the multiple sender xml file one by one from FTP to RFC in time gap.
For Ex:
I will place 10 xml file in a FTP path at a time, PI is picking 10 file at a time and process it to RFC at a time.
Any other way to process the multiple file one by one through PI in a time gap to RFC
(i,e) PI needs to process the 10 files one by one, once the first file processed successfully from FTP to RFC then the next file to process in a time gap to avoid getting the error in RFC.
Kindly suggest your ideas or share some links how to process this multiple files.
Best Regards,
Monikandan.

Hi Monikandan,
You can use CE BPM with PI 7.1 But first check the suggestion of Anupam in the below thread:
reading file sequentially from FTP using SAP PI file adapter
Regards,
Nabendu.

How to send XML file into XI using sender HTTP adapter

I am using HTTP sender adapter to post the XML file into XI. I tried to form the URL by using the following String query , but I am unable to execute file.
String urlString = "http://<servername:portno>/sap/xi/adapter_plain?namespace=<namespace>&interface=<interface name>&service=<service name>&party=&agency=&scheme=&QOS=BE&sap-user=xiappluser&sap-password=satyam&sap-client=100&sap-language=EN";
How can I execute xml file by using HTTP sender adapter.
Any one with better suggestions, about this idea?
Thanks in advance for all.
Ram Raj

Hi
Just use the following parameter to send xml file using HTTP adapter.
"http://xiserver:8000/sap/xi/adapter_plain?namespace="senderNamespace"&interface=senderinterface&service=sender service";
"&party=sender party"&agency=&scheme=&QOS=BE&sap-user=userid &sap-password=password&sap-client=100&sap-language=D";
with the help of this you are able to point out which interface you would like to use.
And in payload pass the xml.
and thats it
carry on
Cheers
Regards
Piyush

Send XML as attachment in Email activity

Hi
My requirement is to send XML as an attachment through email .
In the attachment if i select the MIME type as "XML" then no email notification is sent,
but if i select the MIME type as "text/html" , then attachement is sent through email , but attachment is in different format( with no content inside attachment) .
Can anyone help me on this .

have you tried the example on this page : http://java.net/projects/oraclesoasuite11g/pages/Notification

Send XML to client: message box

Hi,
In a BPM workflow I'm putting together, I need to open a message box for information
(title, message, OK button). In the documentation, I found that I should send
an XML document to a client that looks like this:
<message-box title="title" style="information" options="ok">
<actionid>"1013679664318"</actionid>
</message-box>
Which I did: I added a "Send XML to client" action in the "True" part of a decision
node with a message-box element and its attributes, and actionid as a nested element.
When I trigger the workflow, it goes through all the expected steps but the window
does not pop up at all. I could not find the reason why anywhere. So has anyone
experienced the same problem ? If yes, how did you solve it ?
Cheers,
Yann

Hi Sudhar.
I don't think your workflow will execute the next node before you mark the current
node as done. Conseqently setting the done in the decision box isn't possible.
Giora
"Sudhar" <[email protected]> wrote:
>
After I do the Send XML to Client from the exeucte tab of an action...instead
of
marking the task as done on the call back actions...i try to mark the
same task
as done in the next task after a decision box....it doesnt seem to work?
any ideas? should you always mark a task as done on the same task?

Send XML in a REST request

Similar Messages

Maybe you are looking for