Sender ABAP Proxy - EOIO

Dear Experts,
I have two requirements. Requesting experts' help.
1. How to acheive Quality of Service EOIO for Sender ABAP Proxy. I know there is set_serialization_context method that we can use, but do not how to. Do we have a guide? Can  you please help?
2. When I acheive EOIO as mentioned in point-1, when all the messages are sent to same queue, in case if previous message fails in PI mapping, I do not want the next message to stuck in the queue, it should continue processing. How can we do this?
Thank you.
Best Regards,
Saravanan

Hi sarvana,
For your first question:
Please see the thread:
How to determine quality of service of communication between XI and R/3
second question
In Case EOIO any kind of error Message processing will be stopped.
You cant specify that only for mapping error EOIO will not work and for other error it should work as EOIO

Similar Messages

  • EOIO in sender ABAP proxy

    Hi
    I am referring to I am referring to /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies for EOIO in sender abap proxy
    My requirement was to send thedata and trigger messages in EOIO fashion in one Queue.
    This is working fine for one interface...
    but for the other interface it  is always creating 2 queueids...one for data messages and other for the trigger message..
    Queueid that I have given is supose "ABC"
    then it is always creating 1 Q like XBQOT___ABC
    and 2nd Q    like XBQOH1__ABC.
    ideally both the Qname should be the same...any ideas?
    PS: if i check the Q name in SXMB_MONI of SAP system it is same for both the data and trigger like "ABC"
    Edited by: Tarang Shah on Jun 4, 2010 5:12 PM

    Any ideas ?

  • Error while executing sender ABAP proxy program in ECC

    Hi,
    We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
    <SAP:Category>XIProtocol</SAP:Category>
      <SAP:Code area="PARSING">GENERAL</SAP:Code>
    <SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at   etc etc
    Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
    Let me know if you need more info.
    Regards,
    N@v!n

    Hi Naveen,
    We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
    And could you please tel me what is the main diff between in these two.
    As we are are using PI 7.31 java stack so for this version what we have to use.
    Thanks,
    Shivdeep Kumar

  • Problem with sender ABAP proxy

    Hi All,
       I have created sender ABAP proxy (Async). I am testing the proxy from SPROXY transaction it selft .. when i provide the data and execute the proxy it is showing <b>"Services Processed Without Error"</b> , but i am not getting any error , i am not able to see any message in SXMB_MONI or RWB .. how to check where the message is failing ??

    Hi,
    You said you are sending message from proxy....its very easy to debug in this case. You can set a breakpoint directly in your proxy caling program. Just check if you are calling commit work after calling proxy.
    Also you can do it using the abap system command '/H' or the code 'BREAK-POINT' for/in the report program triggering the iterface.
    Check out this thread...
    How to Debug proxies
    Hope this will help you.
    Ni;esh

  • Sender Abap Proxy no get in PI

    Hi expert,
    I have an sender abap proxy scenario which working fine in development server and even staging server but when transported to production server, the data seem can't go into PI server. I have check all the setting and sure the setting was set correctly. When i check on the system log in sm21 abap ERP, it show an error.
    Operating system call gethostbyname failed (error no. 0 )
    Any idea on how to solve this? Thanks.

    Hi,
    plz check transactions sldcheck and sldapicust. Everything ok?
    What about SXMB_ADM? System maintained as Application System? Destination given to PI Runtime?
    Can you ckeck that destination at SM59?
    Plz have a look to destinations SLD_NUC and SLD_UC. Do they work?
    Regards,
    Udo

  • Sender Abap Proxy -- Receiver JDBC , catch communication channel exceptions

    Hi All,
    I have a sender abap proxy and a receiver jdbc asynchronous interface.
    Now under some circumstances when I send some junk data for an update query(which satisfies metadata requirement but wrong primary key) it shows chequered flag in both XI and r/3.
    But in communication channel it shows error.
    Queries:
    1. How do I handle this.
    2. Since this is triggered from Abap wht will be subrc when method ends in this particular case.
    3. Is there any possibility of program goin into dump?
    Regards,
    Prem

    You can catch the exception in cx_ai_system_fault.
    http://help.sap.com/saphelp_nw70/helpdata/en/75/a55c3cff8ca92be10000000a114084/content.htm
    DATA:
    lo_mes TYPE REF TO
         [Client proxy class],
    l_sys_exc TYPE REF TO
            cx_ai_system_fault,
    l_app_exc TYPE REF TO
            cx_ai_application_fault.
    CREATE OBJECT lo_mes.
    TRY.
    CALL METHOD
      lo_mes->EXECUTE_SYNCHRONOUS
        EXPORTING
          OUTPUT    = ls_request
        IMPORTING
          INPUT     = ls_response.
    CATCH cx_ai_system_fault
                INTO l_sys_exc.
    * handle system error
        EXIT.
    CATCH cx_fault_1
                INTO l_app_exc.
    * handle application error 1
    CATCH cx_fault_n
                INTO l_app_exc.
    * handle application error n
    CATCH cx_ai_application_fault
                INTO l_app_exc.
    * handle other
    * application errors
    ENDTRY.
    Thanks,
    Beena.

  • Make Sender ABAP proxy transport HTTPS

    Hi Experts,
    I have a sender ABAP proxy scenario without CC configuraiton. Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?

    Hey,
    >Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?
    Yes,
    Create the Port for HTTPS, Install the certificates , Change the parametr in Visual admin for HTTPS call.
    Cheers
    Agasthuri

  • I want to test sender ABAP proxy in AAE by SOAP client

    To PI Specialists
    Now I plan to test sender ABAP proxy in AAE by SOAP client system.
    (we use aae so we set sender abap proxy by sender soap adapter.)
    ABAP creating team and PI creating team are in other site.We cant contact easily.
    I want to separate ABAP Unit test and PI Unit test, plan to use soap client for test driver.
    (we use SOAPUI. )
    the url is http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=party:service:channel
    I noticed that sender soap adapter is started, but the messeage protocol is invalid.
    we use messege of wsdl. it must be XI3.0 protocol.
    Please tell me XI3.0 protocol.
    Naoki

    This is possible to do in SOAPUI.  I am testing this scenario using AAE, but I am also using SOAP UI Pro.  The procedure is pretty basic.  Instead of sending your payload in as part of the body, you have to send it in as an attachment.  You will also need to set the header correctly.  Here is a sample message from my SOAP UI tests that may help. The only thing you need to do differently is load the attachment, name it, and make sure that the name of the attachment is reflected in the SAP:Payload attribute.  Also, I am using a Groovy script to create a GUID.
    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    <soapenv:Header>
      <SAP:Main versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
                xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
       <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
       <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
       <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
       <SAP:TimeSent>${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}</SAP:TimeSent>
       <SAP:Sender>
        <SAP:Service>SVCNM</SAP:Service>
       </SAP:Sender>
       <SAP:Interface namespace="Interface_Namehttp://namespace.com">Interface_Name</SAP:Interface>
      </SAP:Main>
      <SAP:ReliableMessaging SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
      </SAP:ReliableMessaging>
      <SAP:System SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SAP:Record namespace="http://www.sap.com/webas/712/soap/features/runtime/metering/" name="CallingType">SA</SAP:Record>
      </SAP:System>
      <SAP:Diagnostic SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SAP:TraceLevel>Information</SAP:TraceLevel>
       <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
      <SAP:HopList SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
       <SAP:Hop timeStamp="${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}" wasRead="false">
        <SAP:Engine type="BS">SVCNM</SAP:Engine>
        <SAP:Adapter namespace="XIhttp://sap.com/xi/XI/System">XI</SAP:Adapter>
        <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
        <SAP:Info>3.0</SAP:Info>
       </SAP:Hop>
      </SAP:HopList>
    </soapenv:Header>
    <soapenv:Body>
      <SAP:Manifest wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink"
                    xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
       <SAP:Payload xlink:href="cid:TestPayload.xml">
        <SAP:Name>MainDocument</SAP:Name>
        <SAP:Description/>
        <SAP:Type>Application</SAP:Type>
       </SAP:Payload>
      </SAP:Manifest>
    </soapenv:Body>
    </soapenv:Envelope>
    Here is a picture of my SOAP UI project in case it help the understanding.

  • How to handle exceptions in sender ABAP Proxy

    Hi Experts,
       I have a synchronous scenario.
       SAP R/3 System A -ABAP Proxy <-> PI <-----> SOAP< ---> Webservice
       In system 'A', a function module calls the ABAP Proxy method.
       My requirement is that if there is an exception in PI ( for example: timeout or ABAP engine error) then I want to get the exception details in the calling function module.
    For example:
    Exception in PI:
      <SAP:Error xmlns:SAP="XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Category>XIAdapterFramework</SAP:Category>
    <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
    <SAP:P1/><SAP:P2/>
    <SAP:P3/><SAP:P4/>
    <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace=""/>
    <SAP:Stack/>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    In the calling function module:
    Try
    Call to proxy-> method
    Catch cx_ai_system_fault INTO v_o_fault.
           v_err_msg1 = v_o_fault->GET_TEXT( ).
           v_err_msg2 = v_o_fault->errortext.
           v_err_msg3 = v_o_fault->code.
    Endtry.
    Here I get value "MESSAGE.GENERAL" for  v_err_msg1 and v_err_msg3. v_err_msg2 is blank.
    I want to capture the info available under <SAP:AdditionalText>. How to get that?
    Please help!
    Thanks & Regards
    Gopal

    >
    gopalkrishna baliga wrote:
    > Hi Experts,
    >
    >    I have a synchronous scenario.
    >
    >    SAP R/3 System A -ABAP Proxy <-> PI <-----> SOAP< ---> Webservice
    >
    >    In system 'A', a function module calls the ABAP Proxy method.
    >
    >    My requirement is that if there is an exception in PI ( for example: timeout or ABAP engine error) then I want to get the exception details in the calling function module.
    >
    >  For example:
    >
    > Exception in PI:
    >
    >   <SAP:Error xmlns:SAP="XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    > <SAP:Category>XIAdapterFramework</SAP:Category>
    > <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
    > <SAP:P1/><SAP:P2/>
    > <SAP:P3/><SAP:P4/>
    > <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
    > <SAP:ApplicationFaultMessage namespace=""/>
    > <SAP:Stack/>
    > <SAP:Retry>M</SAP:Retry>
    > </SAP:Error>
    >
    > In the calling function module:
    > Try
    >  Call to proxy-> method
    >
    >  Catch cx_ai_system_fault INTO v_o_fault.
    >        v_err_msg1 = v_o_fault->GET_TEXT( ).
    >        v_err_msg2 = v_o_fault->errortext.
    >        v_err_msg3 = v_o_fault->code.
    > Endtry.
    >
    > Here I get value "MESSAGE.GENERAL" for  v_err_msg1 and v_err_msg3. v_err_msg2 is blank.
    >
    > I want to capture the info available under <SAP:AdditionalText>. How to get that?
    >
    > Please help!
    >
    > Thanks & Regards
    > Gopal
    Hi Gopal,
    Maybe the exception is CX_SY_APPLICATION_FAULT, or you can catch by BPM in PI and send back to proxy like a message response.

  • AAE- Sender ABAP Proxy to SOAP - Payload not reaching PI 7.10 SP4

    Hi friends,
    I am developeing interface from Solman to PI to 3rd party.
    I configured the interface using ABAP stack and it worked fine.  Then i changed the RFC destination used in SXMB_ADM to point to adapter engine so that i can use AAE.
    I configured SOAP adapter. I wonder there is no option to select BE, EO or EOIO in PI7.30 when we select XI protocol.
    I can see my payload in SXMB_MONI is solution manager but the payload is not reaching SAP PI although i am receiving the message and can see error also in Adapter.
    Does we need to do anything different in PI configuration to achieve it ?
    Regards
    Inder

    Hi Baskar,
    I am on 7.30 so it should work. I created another interface and  it works fine.
    The only difference between my interface which is not working is "Java Mappping" and also i have custom adapter module on receiver channel.
    I think the reason for failure is custom Java adapter as it is called before the mapping is executed(In AAE mapping is executed by receiver adapter chain and i configured module before that)
    I think i need to redesign my adapter module to manipulate input payload of mapping rather than output payload.
    Regards
    Inder

  • Bpm send abap proxy problem

    BPM send abstract interface sd025proxy (bapa proxy).
    in sproxy only message interface outbound and inbound can create proxy, abstract interface can't  create proxy.
    so how can I handle this in ID?

    Proxy communication needs direction....abstract interface does not have any direction.
    BPM send abstract interface sd025proxy (bapa proxy).
    BPM will send abstract interface...fine....however when you run config wizard for BPM --> SAP communication include the inbound message interface corresponding to your proxy wherever there is a reference for target(receiver) MI....create a new MI in IR accordingly.....this is the only option available.
    Regards,
    Abhishek.

  • Sender Abap Proxy -- Receiver JDBC MaxDB

    Hi Experts,
    Please, PI works with MaxDB database?
    What is the procedure? Need to install drivers?
    SO is Linux.
    Thanks for the help!

    Hi,
    >>>>Please, PI works with MaxDB database?
    yes
    >>>What is the procedure? Need to install drivers?
    yes you need to install the driver - the rest is the same as with any other DB
    Regards,
    Michal Krawczyk

  • Error Handling for ABAP Proxy sender

    Hello Everyone,
    I am trying out a scenario of SAP R/3 to Oracle database (ABAP Proxy to JDBC).
    I have the following code and it works fine.
    CALL METHOD prxy->execute_asynchronous
          EXPORTING
            output = it.
         commit work
      CATCH cx_ai_system_fault .
        DATA fault TYPE REF TO cx_ai_system_fault .
        CREATE OBJECT fault.
        WRITE :/ fault->errortext.
    I know that the above Catch block would be used to handle system errors on the sender side.
    Please tell me what kind of errors could these be and what I can do to test these errors. ie. I want to  create error situations explicitely and see how they are handled.
    Thanks and Regards,
    Ashwin

    Thanks guys, this was useful.
    My scenario is for Asynchronous communication.
    I guess Fault messages are used in case of Synchronous communication for handling application errors. So if there was something wrong at the JDBC end then I could use the fault messages.
    Have i got this right?
    I also came across this piece on Acknowledgements. But is says that they can be used with the following Receivers:
    The following receivers support acknowledgments:
    ABAP and Java proxies (XI 3.0 SP1 for the latter)
    Integration processes
    IDocs (note that IDocs only return acknowledgments when they have been configured using the ALE audit)
    Receiver adapters support system acknowledgments but not application acknowledgments
    My Receiver is JDBC. So I guess I cannot use acknowledgements either.
    Hence, I need to know what I can do to replicate the system errors eg. failed server etc...so that I can get catch these errors during sending.
    I'll tell you abt what happened earlier.
    My XI server was down. I executed the code for the sender ABAP Proxy and it did not catch the error. In SXMB_MONI in the R/3 system, I could see the messages queued up. When the XI server started, the messages were transferred to XI.
    I need to handle such errors...ie. If  the server is down or message did not reach XI then my ABAP program that sends data via ABAP proxy needs to know that something went wrong.
    Thanks and Regards,
    Ashwin

  • Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

    Dear Experts,
    I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
    configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
    Cc monitoring in NWA.
    1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
    local IE i.e. Tx SXMB_MONI.
    Note : In NWA , I can see only 1 message that too in cancelled status.
    2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
    from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
    3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
    it should in ACTIVE status in Tx SMQR..
    Regards
    Rebecca

    Hi Thomas,
    Valuable inputs..
    1. Since I don't have any audit log for successful message, would you be able to share referring to the
    below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
    2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
    3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
    Regards
    Rebecca

  • SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

    Dear Experts,
    I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
    Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    When I am testing from ECC at Tx SPROXY, I am receiving following error.
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
    1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
    2. No Response message is shown in ECC when testing the message.
    3. How do Receiver JDBC adapter for Oracle Database is configured 
    4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
    Please guide.. All your inputs will be appreciated......
    Regards
    Rebecca

    Dear Indrajit,
    Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
    But still to go, some of the queries needs more input.
    1.In ID, i have created a Sender SOAP communication channel with listed details.
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
    2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
    Sorry to bother experts...Please answer in sequence...
    Regards
    Rebecca

Maybe you are looking for