Sender Agreement - Assigned Users not work

Hi Experts,
I have a scenario SOAP - XI and I want to establish authorization to certain users. I am trying to assign user to the Sender Agreement but it does not work.
I am using in the URL the next prefix /sap/xi/engine?type=entry, but if I use the prefix /XISOAPAdapter/MessageServlet, it works fine.
Is it possible to assign users to Sender Agreement using the prefix /sap/xi/engine?type=entry?
Thanks,

Hi,
There are two ways of sending a message to XI using SOAP Adapter. The first one is to the adapter engine via ./XISOAPAdapter/MessageServlet. The second one is to the integration engine via propose URL. The first one will use the sender agreement because it is considered a java call but the second one will not (same with PlainHTTPAdapter).
Hope this helps,
Mark

Similar Messages

Send email when ownership is assigned' is not working

Send email when ownership is assigned'
is not working
even though this option is disabled designer workflow task creation sends an email to the user when task is assigned to the user.
We have october CU updates 2013.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Amit,
Per my knowledge, if the task is created from a workflow, then you may use the task actions in the workflow.
And some task actions will send an email to the user who the task is assigned to, so the email is sent from the workflow and it is not sent from the option “Send email when ownership is assigned”.
If you are using 2013 workflow, the send email action cannot be prevented from the workflow.
If you are using 2010 workflow, you can go into the task process to delete the Send an Email action.
https://support.office.com/en-nz/article/Use-the-task-process-editor-for-approval-workflows-8680b4a4-36b1-441c-b070-e515976078aa#__toc264538566
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Sending e-mails does not work

After switching on the mail server, adding an MX record on the DNS of the server and on the web site of the domain supplier the mail server is working. That is sending and receiving locally works. Receiving external mail works as well but sending mail back does not work. The mail is sent but never arrives. The SMTP log gives the following message.
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[173.194.70.26]:25: Operation timed out
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to gmail-smtp-in.l.google.com[2a00:1450:4001:c02::1a]:25: No route to host
Jan 19 23:19:10 domain.nl postfix/smtp[80282]: connect to alt1.gmail-smtp-in.l.google.com[2a00:1450:4010:c04::1b]:25: No route to host
(domain.nl is not the real used domain name)
Can anybody help.
It is the last part of the server that does not work. Wiki's, webserver, network users, calendars, contracts are all working fine.
Thanks in advance.

are you on a static IP with a provider that doesn't block port 25?
from terminal, what happens when you
telnet gmail-smtp-in.l.google.com 25

Sender Soap Channel is not working - Service Temporarily Unavailable [503]

dEAR FRIENDS,
We are facing one critical issue in sender soap adapter. After upgrading our system to PI 7.1 The sender soap channle is not working. From source system it is not reaching PI : the log from source system as follows:
org.springframework.ws.client.WebServiceTransportException: Service Temporarily Unavailable [503]
      at org.springframework.ws.client.core.WebServiceTemplate.handleError(WebServiceTemplate.java:627)
      at org.springframework.ws.client.core.WebServiceTemplate.doSendAndReceive(WebServiceTemplate.java:551)
      at org.springframework.ws.client.core.WebServiceTemplate.sendAndReceive(WebServiceTemplate.java:502)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:351)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:345)
      at org.springframework.ws.client.core.WebServiceTemplate.marshalSendAndReceive(WebServiceTemplate.java:337)
      at com.palm.txnengine.wsclient.DailyRevenuePostingWSGateWaySupport.postToSap(DailyRevenuePostingWSGateWaySupport.java:23)
      at com.palm.txnengine.wsclient.DailyRevenuePostingImpl.execute(DailyRevenuePostingImpl.java:93)
      at org.springframework.batch.core.step.tasklet.TaskletStep$2.doInChunkContext(TaskletStep.java:264)
      at org.springframework.batch.core.scope.context.StepContextRepeatCallback.doInIteration(StepContextRepeatCallback.java:67)
      at org.springframework.batch.repeat.support.RepeatTemplate.getNextResult(RepeatTemplate.java:352)
      at org.springframework.batch.repeat.support.RepeatTemplate.executeInternal(RepeatTemplate.java:212)
      at org.springframework.batch.repeat.support.RepeatTemplate.iterate(RepeatTemplate.java:143)
      at org.springframework.batch.core.step.tasklet.TaskletStep.doExecute(TaskletStep.java:239)
      at org.springframework.batch.core.step.AbstractStep.execute(AbstractStep.java:198)
      at org.springframework.batch.core.job.AbstractJob.handleStep(AbstractJob.java:348)
      at org.springframework.batch.core.job.flow.FlowJob.access$0(FlowJob.java:1)
      at org.springframework.batch.core.job.flow.FlowJob$JobFlowExecutor.executeStep(FlowJob.java:137)
      at org.springframework.batch.core.job.flow.support.state.StepState.handle(StepState.java:60)
      at org.springframework.batch.core.job.flow.support.SimpleFlow.resume(SimpleFlow.java:144)
      at org.springframework.batch.core.job.flow.support.SimpleFlow.start(SimpleFlow.java:124)
      at org.springframework.batch.core.job.flow.FlowJob.doExecute(FlowJob.java:105)
      at org.springframework.batch.core.job.AbstractJob.execute(AbstractJob.java:250)
      at org.springframework.batch.core.launch.support.SimpleJobLauncher$1.run(SimpleJobLauncher.java:110)
      at org.springframework.core.task.SyncTaskExecutor.execute(SyncTaskExecutor.java:49)
      at org.springframework.batch.core.launch.support.SimpleJobLauncher.run(SimpleJobLauncher.java:105)
      at org.springframework.batch.core.launch.support.CommandLineJobRunner.start(CommandLineJobRunner.java:207)
      at org.springframework.batch.core.launch.support.CommandLineJobRunner.main(CommandLineJobRunner.java:254)

Hi,
Please check this generic description:
The error message 503 Service unavailable Application stopped! is displayed.
Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
u2022 Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
u2022 The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
u2022 Refer SAP Note 803145,807000,791655
May it helps.
Regards,
Caio Cagnani

SAP* user not working in new client

Hi,
I created a new client from SCC4. And now I am trying to login with SAP* user and pass password but it is not allowing. Note provided in SAP Config Guide is not working.
I installed SAP Solution Manager 7.0 SP12 and then created a client.
Please let me know how to solve this issue.
Points will be awarded.
Regards.

Hi!
I agree that the issue is probably due to the parameters for the automatic user SAP* - not sure about the Masterpassword though - the newly created client is only an entry in a table at this stage, so I don't think the system will know any password but the hardcoded one...
Something you should be very careful about is the Java-Stack, which is part of SolMan7 and which runs SMD. The Java stack can only interface with one client properly, so I am not sure what's the idea behind the newly created client.
Regards,
Jörg

Lync Mobile for external users not working

Hello,
We have Lync Server Enterprise pool with 2 front end server, 2 edge server & TMG for reverse proxy.
PC client internally & externally working. Internal mobile users are working. But not working for external mobile users.
I used 2 tools to check this.
Web based connectivity analyser, it runs without any error.
But when I use installed version of lync connectivity analyser its throws error that. Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.mydomain.com
Also, I am able to download a .json file when you access
https://lyncdiscover.mydomain.com

Hello,
Sorry for late response. My TMG server was not functioning, now it is working for lync mobile is still having problem. I am pasting the lync analyser full reports:
Network access: NetworkAccessExternal
Logging test parameters:
SIP Uri: [email protected]
User Name:
Discovery Type: Automatic Discovery
Selected client: ApplicationLyncMobile2013
Starting Lync server autodiscovery
Please wait; this test may take several minutes to complete...
Starting automatic discovery for secure (HTTPS) internal channel
Sending HTTP request to
https://lyncdiscoverinternal.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscoverinternal.contoso.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured internal channel against
https://lyncdiscoverinternal.contoso.com/
Starting automatic discovery for unsecure (HTTP) internal channel
Sending HTTP request to
http://lyncdiscoverinternal.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
http://lyncdiscoverinternal.contoso.com/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured internal channel against
http://lyncdiscoverinternal.contoso.com/
Starting automatic discovery for secure (HTTPS) external channel
Sending HTTP request to
https://lyncdiscover.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: Keep-Alive
Pragma: no-cache
X-MS-Server-Fqdn: SGRFLYNC1.contoso.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Mon, 24 Nov 2014 13:36:49 GMT
Server: Microsoft-IIS/8.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1065
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
Parsing the response for URL
https://lyncdiscover.contoso.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="External"><Root><Link token="Domain" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=contoso.com"
/><Link token="User" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com"
/><Link token="Self" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=contoso.com"
/><Link token="OAuth" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=contoso.com"
/><Link token="External/XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame"
href="https://lync.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
Autodiscover URL
https://lyncdiscover.contoso.com/[email protected] redirected to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com
Sending HTTP request to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<ParseResponse>d__16.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for secured external channel against
https://lyncdiscover.contoso.com/
Starting automatic discovery for unsecure (HTTP) external channel
Sending HTTP request to
http://lyncdiscover.contoso.com/[email protected]
Cookie found in autodiscover response: StatusCode: 200, ReasonPhrase: 'OK', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: Keep-Alive
Pragma: no-cache
X-MS-Server-Fqdn: SGRFLYNC1.contoso.com
X-Content-Type-Options: nosniff
Cache-Control: no-cache
Date: Mon, 24 Nov 2014 13:36:49 GMT
Server: Microsoft-IIS/8.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Content-Length: 1065
Content-Type: application/vnd.microsoft.rtc.autodiscover+xml; v=1
Expires: -1
Parsing the response for URL
http://lyncdiscover.contoso.com/[email protected]. Full response: <?xml version="1.0" encoding="utf-8"?><AutodiscoverResponse xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" AccessLocation="External"><Root><Link token="Domain" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/domain?originalDomain=contoso.com"
/><Link token="User" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com"
/><Link token="Self" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root?originalDomain=contoso.com"
/><Link token="OAuth" href="https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/oauth/user?originalDomain=contoso.com"
/><Link token="External/XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="Internal/XFrame"
href="https://lync.contoso.com/Autodiscover/XFrame/XFrame.html" /><Link token="XFrame" href="https://lyncdiscover.contoso.com/Autodiscover/XFrame/XFrame.html"
/></Root></AutodiscoverResponse>
Autodiscover URL
http://lyncdiscover.contoso.com/[email protected] redirected to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/user?originalDomain=contoso.com
Sending HTTP request to
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected]
Cookie found in autodiscover response: StatusCode: 403, ReasonPhrase: 'Forbidden ( The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. )', Version: 1.1, Content: System.Net.Http.StreamContent, Headers:
Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Length: 2040
Content-Type: text/html
Autodiscover: SendRequest(): the URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] couldn't be connected. Complete HTTP headers:\r\n Connection: close
Pragma: no-cache
Cache-Control: no-cache
Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
System.Exception: Couldn't connect to URL
https://lyncdiscover.contoso.com/Autodiscover/AutodiscoverService.svc/root/[email protected] (HTTP status code Forbidden)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.TerminateAD(String mesg)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<ParseResponse>d__16.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
   at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
Server discovery failed for unsecured external channel against
http://lyncdiscover.contoso.com/
None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
Automatic discovery of the Lync server failed. Please verify the server requirements at
http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

Sender agreement & communication channel not needed in case of IDOC adapter

Hello everyone ,
I am new to xi , as far as i know a communication channel cannot be created in ID when using IDOC adapter , the answer for this question is like , the idoc adapter resides on the integration server & not part of j2ee AF .
Can some one explain me in the terms of a laymen , its not clear to me.
Thanks & Regards,
Reena.

Hi ! Reena
IDOC adapter resides on Integration server, so Integration engine takes care of the conversion format from IDOC to XML, hence there is no need for sender Adapter .Also since its residing on Integration server you can directly post the message in the Integration engine.
well lemme explain a little bit,the main reason for sender agreement is to associate namespace with the sender adapter,now when we shoot IDOC from R/3 it already contains its standard SAP namespace so no need of sender agreement.
now comes the sender CC,main use of sender CC is to identify the sending system and the adapter.the IDOC header contains details of all the this,so again there is no need for sender CC
loook at this thread discuss the same
Re: Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sende
Re: why HTTP & IDOC adapter do not require sender communication channel?
Thanks!!
Questions are welcome here!!
Also mark helpful answers by rewarding points
Regards
Abhishek Agrahari

Certain features in Gmail, like chat and sending an email, are not working in normal mode.

There seems to be some sort of problem with perhaps Flash/Java in Gmail, not sure. The chat box doesn't appear, and I can't send or reply to emails unless I'm in safe mode. It seems as though some add-on or feature is not working properly. This is a new issue, but didn't come about after downloading a newer version of Firefox. I am currently using 3.6.
== URL of affected sites ==
http://gmail.com

Update flash to the latest version: http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin?s=update+flash&as=s#Updating_Flash

After SPNEGO is activated other existing services with Technical user not working

Hi All,
We have activated SPNEGO, One of our existing service with Technical user is not working.
When SPNEGO is disabled it works.
Regards
Ram

Hi Patrick
We are using SSO. and domain controller has service user. We are in 7.31 PI as Java so user mapping is not done but have same users in Active directory.
SSO is working fine. But, once specific service is not working where we are using technical user when SSO is active and it is working when SSO is inactive.
Regards
Gangula

Accessing Synchronizer Web Admin as a User not working

Hello,
We use DS Mobility 1.2.2.
Users cannot configure personnal settings from https://ds:8120/
They can successfully log, but the "Manage My Connectors" section is empty.
These users all synchronize their smartphones with GW.
Thanks for any help.

The tree looks like somethings as :
t=mytree
o=myOrg1
o=myOrg2
ou=myou1,o=myOrg1
ou=myou2,o=myOrg2
I add users only per groups.
These groups are in cn=myDSGroup1,ou=groups,ou=myou2,o=myOrg2
Users that are in the same o that the groups can access Connectors Settings. For example, cn=myuser,ou=users,ou=dep,ou=myou2,o=myOrg2 is working.
But cn=mybaduser,ou=users,ou=dep,ou=myou1,o=myOrg1 is not working.
There is no others difference between users.

Assigned ringtones not working

I have a 3gs (AT&T). Assigning a specific ringtone (whether custom or default with the phone) does not work. I have created a custom ringtone and can choose is as the default for all calls and it works fine as do any of the ringtones listed under sounds. I just cannot successfully assign a specific ringtone to a specific contact. Have reset; checked for duplicates; scoured the internet and found nothing that works. The phone software is current. Any suggestions would be appreciated.

sunshine1180 wrote:
I have assigned specific ringtones for specific contacts and recently when that person calls me, the specified ringtone is not working, instead my default ringtone for people I don't know rings. I've gone in and re-assigned the ringtones, but it still isn't working. Please if you know what to do, help me fix this! Thanks!
I found that the Task Manager by Rhythm Software was responsible for causing this problem. I removed the Task Manager and restarted my phone, and now I do not have a problem with assigned ringtones.

Account Assignment Trigger not Working

I'm working on Siebel Assignment Manager.. first I try to Assign Service Request to an Employee and in two Assignment mode (Batch and Dynamic) and it's work fine.
but when I try to assign Account to a Position, and I follow the same steps I followed before, the monitor work and the owner change depending on the Score and the Rule not working ...on the other hand the trigger (Dynamic) not working at all, and there is no change
I have searched to know where is the problem …and didn’t find solution
please help me ASAP
Thanks & Regards,
Enas

Hi Glenn,
Thanks for u r replay.
We are using our own ZVIEWS. We have copied the Bupasearch view and we done some modifications according to our requirement.(added DOB field)
We got DOB in our Zview. But Customer search functionality is not working.
Plz help me to solve the issue.
Thanks,
Sreedhar

Guest user not working at all (Mavericks Ver.10.9.4)

I am currently using a 2011 MacBook Pro running OS X Mavericks Version 10.9.4.
I'm having an annoying problem regarding the guest user, I just can't seem to get it to work. I got to User and Groups in the System Preferences, check the box "Allow guests to log in to this computer" and it doesn't work. I've tried turning it off, restarting my computer, then turning it back on and yet the guest account still doesn't show up in the login page or in the faster user switching menu. It's crazy how there's barely any information on how to fix this. I've searched google and the only results are how to enable guest user or how to get rid of it, nothing pops up on that the guest user is not working so I've come to the Mac community to see if I can get any help here. I have updated everything in my software update by the way.

This procedure is a diagnostic test. It makes no changes to your data.
Please triple-click anywhere in the line below on this page to select it:
dscl . -list /Users | grep Guest | pbcopy
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered.
The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
The Terminal window doesn't show the output. Please don't copy anything from there.
If any personal information appears in the output, anonymize before posting.

Sending Mail, Port 587 not working

My Mail app doesn't send anything. I can receive stuff with not problem, and I did a search here on the forums and found that changing the port to 587 was one fix. That did not work.
The message I am getting it that the server is timing out, and after calling my ISP and being on the phone with them for half an hour they said if was an apple issue.
Has anyone figured out any other fixes besides changing the port to 587?
Blake

Blake,
This may only be a typo as you posted, but you have misspelled the server name, in that I am sure the prefix should be smtp and not stmp.
If only a typo as your posted, then this might be an issue with MTU (maximum transmission unit). See the following support document for methods of diagnosing this:
http://docs.info.apple.com/article.html?artnum=303192
If lowering the MTU manually works, then we can look for other ways to fully accomplish the correct balance, which might include shutting down modem, router, and other elements of the network and then repowering.
Ernie

OKB9-Internal order assignment is not working

Dear Guru
I have an Requirment that whenever Billing document get posted data must flow to xxxxx Internal order.I assign the Internal order to cost element in OKB9.But not when posting billing document I cant see internal order in accounting or general ledger view.

Hi Deepali
If copa is active, revenue will post to copa. Okb9 is just a default and is used when no other cost object found
If you want biling to post only to Int order, assign it in your sales order account assignment tab
Note that in vkoa, you will need to maintain GL acct against Kofi and kofk both in that case
If you want it to post to both IO and copa, enter IO along with Prof segment in sales order
Br. Ajay M

Sender Agreement - Assigned Users not work

Similar Messages

Maybe you are looking for