Sender Agrrement problem

Hi guys,
I am facing very strange problem , I have created sender agreement in ID but i am not able to see it in SXI_CACHE . I have done the DELTA and FULL cache refresh
but nothing happened.
Any idea how to remove this problem.
Regards,
Keith

Hi keith ,
Is the sender Agreement visible under the objects tab in your ID ?
if so try reassigning the the sender agreement to your scenario . Activate the same and then check whether it is reflected in SXI_CACHE .
Thanks & Regards,
Ashish Sharma .

Similar Messages

R/3 to XI manually IDOC sending and problem:

R/3 to XI manually IDOC sending and problem:
I sent IDOC using we19 transaction from R/3 system. After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
I check XI (sxmb_moni) but there is nomessage there.
Problem 1: I don't want R/3 ask me UID and password for XI access
Problem 2: I want to see message in XI (sxmb_moni)
Thanks

Hi Cemil,
>>>>After sending it asks me userid and password for XI system. I give necessary UID and PASS. R/3 system says me sucessfully sent.
check the RFC destination from R3 to XI (SM59)
you will find the right one from your port (We21)
you can also check step by step procedures
for IDOC - XI in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

HT5934 my phone switched off even 60% charge (pls send me problem)

sir my phone is suddenly switched off even 60% charge
pls send me problem
regards for you
venkata ramarao

Try following these steps:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
(from http://support.apple.com/kb/TS2802 )

10.5.8 server postfix sender domain problem

Hi,
I set up my power mac g5 as web and mail server. Everything is working wihout problem except this issue.
ı configure my webmail as webmail.xxx.com. when i try to send mail from mail server to other servers, i can see my mails in queue , i saw sender mail address as [email protected] if i change webmail adress to example.xxx.com this time i saw [email protected]
All the mail recipients saw like this. When i first think this must be a postfix configuration prorblem. i cannot see an extra settings about this in server admin panel.
So i changes the main.conf fie of postfix for smtp settings there are two choise $mydomain or $myhostname.
i caned it to mydomain but nothing changed. How can i fix it ?
Best regards

Is this a problem that only happens when sending from the webmail (SquirrelMail) client, or from all email client apps (Apple Mail, Outlook, Thunderbird, etc.)??
SquirrelMail, by default, uses the hostname entered in DNS as the originating address. So if you log in as User_1 and send via SquirrelMail and your email server is desginated as mail1.example.com, the sending address will show as "[email protected]"
You can over-ride this in the Settings of for each user in SquirrelMail by setting the email address to the proper value, as "[email protected]"
-Doug

Sender RFC-Problem in SM58

Hi all,
Currently I am working on RFC synchronous call with out using BMP.
Here we have developed two asynchronous RFC call to achieve the above requirement.
Here are the details,
1. A call from FILE-XI-RFC (Receiver), for sending the selection criteria
2. Another call from (Sender) RFC-XI-FILE for sending the response back.
Here I am going to call 2 RFCs to get the response back. Here when I am working with the scenario (2) i.e., sender RFC, I have done all the design and configuration part of it.
And when am trying to test this sender rfc from a sample ABAP report (with COMMIT WORK) the RFC gets executed without any error but when I check in SM58 all the back ground tasks gets queued and are not getting processed further.
Can anyone please help me out? Is it a configuration problem in XI or in ABAP.
Please help me. Its very urgent for me.
Thanks in advance,
-kanth.

Hi,
did you try to push the entries in SM58 -> F6 ?
do you see any error ?
also check out my blog:
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
to see if your RFC to XI is correct - you can test it from sm59
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Anyone has a remedy for mail/leopard sending emails problem ?

I just spend hours on my MBP trying to set up MAIL and on various forums trying to find a cure for what seems to be a common problem on Leopard, not being able to send emails. I like many others are getting the "can not send message using the smtp server verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator"
Ok I verified till I was blue, all settings are ok, info provided by ISP and checked, I tried various other combinations and I keep getting the same message. I can receive emails no probs and I can also send emails to myself . I looked on Apple site and it just tells me to check everything, yes it's a known problem but no cure in sight.They simply can't be serious and expect people to be without such an important function? So this means that I cannot send emails until someone gets off their a**e at Apple and fixes this problem ? Can any of you kind folks help, what else should I try ? I have been on Apple now for half a year but encountered same problems and grief as I had with windows for years.

found problem
im using aol still
aol just implimented a image verification (stupid) i downloaded the new aol desktop for mac and tried sending a test email.. it asked me to verfiy myself and now it works... dumb
so if you have same problem, download aol desktop for mac and send a test email, it will tell you do a image verfication.. do it and then it will say you can now send email...
how stupid... like the login/password wasn't enough...
and now i just can't even imagine why they are loosing money and almost gone (aol)

Sender JDBC Problem

Hi
can any one hlp me..
My scenrio is JDBC is sender and file is Receiver.
problem is JDBC adapter is hitting the SQL server and retrived the data and Inbound message and Receivng Grouping Payload ..like this..
<?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<TransactionNumber>118</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>1368986</CustomerNumber>
</row>
Response payload is showig only name space..of frist two lines..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:resultset_mt xmlns:ns0="urn:Poll_Database_File" />
even MessageData and Audit logs showing successfully delivered ..
Other than soap content in Message Content showing only name space of xml...first two lines..
So please let me know , where i did mistake?
Regards..Rambarki

Sharavan..the SQL statement is working fine..
otherwise i wont get this payload in Inbound Message
<?xml version="1.0" encoding="utf-8" ?>
- <resultset>
- <row>
<TransactionNumber>118</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>1368986</CustomerNumber>
</row>
- <row>
<TransactionNumber>254</TransactionNumber>
<CompanyCode>1004</CompanyCode>
<CustomerNumber>2755685</CustomerNumber>
</row>
see u can find the data in payload..but thing is repsonse payload showing like this..
<?xml version="1.0" encoding="UTF-8" ?>
<ns0:resultset_mt xmlns:ns0="urn:Poll_Database_File" />
only..
i didn;t understand..what is this error/
regards
sankar

Sending mail Problem (Urgent Please)

The following program mail coding program. I am in local System. Host is my server. But our Server (norton) firewall is enabled. I am not able to send any mail. Will you please tell me How to recover this problem or alter my coding. If anybody knows Please tell me.
<html>
<head>
<title>JSP JavaMail Example </title>
</head>
<body>
<%@ page import="java.util.*" %>
<%@ page import="javax.mail.*" %>
<%@ page import="javax.mail.internet.*" %>
<%@ page import="javax.activation.*" %>
<%
try
String host = "xxx.xxx.x.x";
String to = request.getParameter("to");
String from = request.getParameter("from");
String subject = request.getParameter("subject");
String messageText = request.getParameter("body");
boolean sessionDebug = false;
Properties props = System.getProperties();
props.put("mail.host", host);
props.put("mail.transport.protocol", "smtp");
Session mailSession = Session.getDefaultInstance(props, null);
mailSession.setDebug(sessionDebug);
Message msg = new MimeMessage(mailSession);
msg.setFrom(new InternetAddress(from));
InternetAddress[] address = {new InternetAddress(to)};
msg.setRecipients(Message.RecipientType.TO, address);
msg.setSubject(subject);
msg.setSentDate(new Date());
msg.setText(messageText);
Transport.send(msg);
out.println("Mail was sent to " + to);
out.println(" from " + from);
out.println(" using host " + host + ".");
catch(Exception e)
System.out.println("Error");
%>
</table>
</body>
</html>
Please tell me how to recover this problem
Thanks in advance
regards
pooja

Please tell me my mail coding is correct. If correct but i am not able receive any mail. what is the problem do u know. If you know please tell me
regards
pooja

Mail sending ONLY problems

Just installed a new macintosh - 20" dual 2 core iMac - love it. Problem:
Set up pop email account and it seems my ISP (excite.com) is rejecting the email traffic I send due to mis-matched info in the header. I included the reject message at the end of this note. Question: Does the macintosh automatically route an email through a mac.com server on its way to the smtp outgoing mail server? That seems to be my problem...or I have it all wrong - not sure!! Any help appreciated...
Date: Sun Oct 29 19:04:34 2006
From: Mail Delivery Subsystem <[email protected]>
[ Add to Address Book | Block Address | Report as Spam | This is not Bulk Mail ]
To: <[email protected]>
Subject: Returned mail: see transcript for details
The original message was received at Sun, 29 Oct 2006 16:04:32 -0800 (PST)
from mail23-ce1 [10.13.11.50]
----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 554 <[email protected]>: Sender address rejected: The mailserver used does not match the excite.com domain Error: WS-13)
----- Transcript of session follows -----
... while talking to xmxatip.excite.com.:
DATA
<<< 554 <[email protected]>: Sender address rejected: The mailserver used does not match the excite.com domain Error: WS-13
554 5.0.0 Service unavailable
<<< 554 Error: no valid recipients
<div class="jive-quote">RSET
<<< 421 xprdmx30.nwk.excite.com Error: too many errors
Forwarded Message:
Forwarded Message:
Return-Path: <[email protected]>
Received: from mail23-ce1 (mail23-ce1 [10.13.11.50])
by smtpout.mac.com (Xserve/8.12.11/smtpout05/MantshX 4.0) with ESMTP id k9U04WL5009210
for <[email protected]>; Sun, 29 Oct 2006 16:04:32 -0800 (PST)
Received: from mac.com (smtpin45-en2 [10.13.9.113])
by ms23.mac.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005))
with ESMTP id <[email protected]> for [email protected]

OK.
Receiving mail from these "excite-able" servers works.
Sending mail does take more detailed precision.
Reconfigured "many times". How many times?
Probably about 5 - each time I made a tweak that I thought might work !!
But you say that Mail.app shows it "Sent", no errors?
YES - I would not know there was a problem if I did not send myself an email and never get it...
What about the bounce msg you attached?
Where does that appear?
Only in webMail ('interent based mail >>application'...whatever that means?)
WebMail
And there's nothing in any of your setup where you >>see "mac.com"?
Yes, mac.com is a server shown - but not selected
That's sort of an indication that you've somehow set up >>your mail to send through the apple dot-mac.com >>arrangement that might have been a promotional feature >>with your new Mac.
That was my thought - is it possible? How would I correct?
As long as your setup to adelphia works within Mail, use >>that configuration and modify IT to match the Excite >>settings.
Did not know that was possible - I will do - any hints on how?
Too bad Excite doesn't have an interactive help page. >>But they're free, right?
Email support is almost as putzy as the AppleDiscussions >>sometimes (just kidding)
Not free for "pop" access - I am re-thinking that now...grin!

Sender RFC problem

Hi,
I defined a Sender RFC to build RFC-XI-Others scenario, accoring to the document here, I create a sender RFC communication channel with the host and service(sapgw00) of R/3 system, and specified a program ID, then I created a TCP/IP destination in R/3 with the sames host, server, and program id, but when I did the test with SM59, it says: program RFCTEST not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
What's wrong with my setting?
Thanks a lot!
Best Regards
Yuedong

Dear All,
Thanks for your replies, I solved the problem!
Next, I got the following error in R/3
call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
In XI, I saw the error as:
HTTP response contains status code 401 with the description Unauthorized Error when sending by HTTP (error code: 401, error text: Unauthorized)
And I also has the problem:
Unable to notify integration runtime (ABAP) of data changes
http connection to "http://gdsapxi:8000/sap/xi/cache?sap-client=000" returns the status code "401" in response
They seems more difficult for me, could you please provide me the comments.
Thanks a lot!!!
Best Regards
Yuedong

Germany - sending mail problem

as many before am not able to send mail from my private email account - neither via edge nor when using wifi. However it works from my .Mac account. It is an SMTP issue. My ISP tells me that the server drops after ehlo. In order to gather some more information, I have this question to the proud folks sporting a new t- mobile iPhone since Friday:
What SMTP server is recomended by t-mobile when sending via edge (if they do recomend one at all)?
Anyone having the same problems out there with an idea why theserver may drop conection and a work around (other than using a different ISP)
Thanx,
Christoph

Not sure but since .Mac's SMTP server is authenticated and this works when sending messages from the iPhone with your .Mac account, this indicates your ISP's SMTP server is not authenticated or something else is wrong.
Did you transfer the account settings from your computer to the iPhone via the iTunes sync process?
If so, try deleting the account and manually recreating the account on the iPhone but if this works and you did transfer the account settings from your computer to the iPhone via the sync process, be sure to deselect this option before the next sync or your changes made on the iPhone will be overwritten.

Send mail problem

hello
pleze i tried to send mails from a servlrt in my application
i tried it from a sample in tomcat sendmail.jsp which is connect with
a servlet that manuplates the name and content for tha mail
the problem is
i can't do it from my application which take this servlet and
put it in WEB-APP in the Root it gave me an exception
javax.naming.NameNotFoundException: Name mail is not bound in this Context
pleze help how can i manuplate with it to put it in my application in root
thanx

u've got to put your code on the screen so we can have a look at what u might be doing wrong

Sending email problem

I got a replacement 3GS on 06/08. Everything seemed to be working well. A few days ago, I answered an email, hit send, and assumed the email was sent, but it never appeared anywhere - not in my sent folder - not in my outbox. I decided it was an aberration. Today, I wrote an email, hit send - and it too vanished. So, I did a test email which vanished.
I just reset the iphone (brute force shut down) and another test email just went through fine. But the missing emails that vanished are nowhere. I would have had no way of knowing the phone had to be reset to get "send" working since emails were coming in fine from all my accounts. Several questions:
1. Once I hit send, the email I was writing goes away (perfectly normal) and when things are working fine, there is a "sending" process visible at the bottom of the screen. However, if that doesn't appear - there's no way of getting the email back. It's very inconvenient.
2. So what can I do to prevent the problem happening? Send test emails every day and if they vanish, reset the phone before I write a real one? Should I delete and then add back the account? What can be the problem?

They never made it to the server - just vanished. I sent the earlier test email today to check that I wasn't clicking the cancel button, but saw to my relief that I was hitting the nicer blue send button.
I've had the iPhone for 4 years now - 2 years with the original; and 2 years with the 3GS. When mail hasn't worked, the gear spins on both send and receive so it's clear powering off, or resetting, or resetting network settings is in order. This glitch was only on the outgoing. I checked settings to be sure I'd set it up right - but once you give your ID and set up MM, it sets up send itself.
As for the multi-million dollar deals, nope. Not this week. Maybe my iPhone would rather be involved with them.

Socket data send-receive problem

I hv J2ME client application and vb.net socket server application communicating over sockets. Client connection is made successfully but cant send data to server. When I exit from client application then server application receives those data. (application works pretty fine on emulator but on real device gives above problem)
WTK Sample application gives same problem when I tried.
Any idea abt this problem ? gr8 ful if u have some working code.

yeah your idea works..
I hv used flush() method and now it works (Live on Nokia E62) nicely.
But to keep connection opened during whole application I dont close InputStream/OutputStream connection. I close it only at EXIT of application so that I get optimum performace in transactions.

Fax Send&Receive Problem

Hi,
We have 2801 CME router. Also I connected a fax to this CME. But it gives communication error when sending fax and sometimes receiving. I tried with ATA and FXS ports but still the same problem. When I connect an analog phone to this line I can make calls and receive calls. Also when I connect directly analog line to fax (no cme) it works no problem. What can be the problem ? (Also I tried with two faxes) Can there be a software bug?
Thanks
(C2801-SPSERVICESK9-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3)

Hi,
FAXes can be particularly picky when it comes to line quality. Especially G3 faxes are a nightmare in an IPT environment.
I've been able to get some faxes working by disabling ECM (error correction mode) on it. As far as I know, this is only for sending. So this means that someone trying to send a fax to one of your fax machines would have to disable ECM on theirs.
See also http://www.voipmechanic.com/faxsettings.htm for some background.
Hope this helps!
Best regards,
Donald.

Sender Agrrement problem

Similar Messages

Maybe you are looking for