Sender and Receiver Skype Accounts Regarding Histo...

What happens to all messagnes when deleting history messages if the skype account that was sent to was offline when delete was hit on the sender's side? I can no longer see messages on my side, but do not know if I deleted the messages that had not gone through yet on the receiver's side.

Hi Chana,
Did you configured the biu to "Update on Exist"??? (Guide 03 Extensibility, section 2.14)
You can have a look to the B1iSN 8.8 B12B1 Intercompany scenario in order to see how it is done (B1iSN 8.8 is already in GA). In that scenario the Subsidiary PO is updated with the number of the SO when the SO created by B1iSN in the Headquarters.
Regards,
Trinidad.

Similar Messages

Mac Mail Configuration of Sending and receiveing multiple accounts

Hi
when setting up an account in apple / mac mail below are my configs:
pop.rediffmailpro.com
smtp.rediffmailpro.com
now i need to configure 3 accounts with these details and also be able to send out email with same account. It was working before when i had the same settings on my earlier pop server as the outgoing server but now this is not allowing me 2 add the other 2 accounts for outgoing. Says same server name so stays offline. What do i do? Any suggestions will be very helpful.
preeti

how do i delete this? i was too impatient to wait for answers so figured out was pretty simple

MS Outlook 2011 for Mac will no longer automatically send and receive email since upgrade to OS 10.9 Mavericks. Does anyone know of a solution?

I have been having trouble with Outlook 2011 for Mac since updating to OS 10.9 Marvericks. I have tried updating the database and identity. I can get email if a go to each account and try to download it. But email will not come automatically and can I send and receive all accounts. Does anyone have a solution? I do not want to lose my email, contacts and information.

I am also finding that searching in Mail for emails in this account is leading to false negative results. It's astonishing that I can search for an email I know is in the Inbox list yet not find it unless I scroll down to it manually and clicking it. Then it will show up in the results if I search again. I just did "rebuild" a day ago (have to do that every few days or so to get Outlook Exchange emails restored again anyway), so I doubt that this would fix the issue, but even if it did it's ridiculous... do I really have to abandon Mail and move to Microsoft Outlook on my mac to read my emails? Mail is currently FAILING to work for those of us who have to deal with Microsoft servers... which must be a huge # of customers, Apple.

Sender and receiver channel parameters

Hi Experts,
I am working on a flat file to flat file scnario. I need to remove the first two lines and last two lines from the flat file and send it to ECC via PI
The flat file looks like this
%802 750285 7502857 7502
%JHKJ UYOU 99 9090
dfafds 2255425 4545 sdfs fsdfsdf dsffs fsfda sfsf
rewre ewrewr wetwt wtwtw
%iuoi iuipo
%7878 8787
so i need to remove the first two lines (starts with % symbol) and last two lines (starts with % symbol) and convert back to flat file and send it to ECC.
I have created the data types as
Source Data type
DT_Source
Header 1..1
Header1
Header2
Recordset 1.. Unbounded
Record 1.1
Trailer 1...1
Trailer1
Trailer2
Target Data type
DT_Target
Recordset 1.. unbounded
Record 1.1
Could you plz let me know the sender and receiver channel parameters
Regards,
Vai

Hi Vaigai,
Grzegorz is right.
You can read all the flat file and remove the first two and last two lines using a mapping.
Check this link. There are some content conversion parameters in the sender file adapter that can be helpful
[http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm]
Regards,
Diego Estanguini Gabriel

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

HT201320 Unable to step my outlook account keep getting warning unable to verify account I can send and receive mail on my iMac using the outlook account HELP

Unable to setup my ipad for my outlook account I keep getting the message unable to verify, although I can send and receive mail from my iMac using the same outlook account.

Confirm you did this: https://support.google.com/mail/answer/1173270?hl=en
You might also try removing all gmail passwords from your keychain in Keychain Access. Then connect again and enter the password code given by Google.

How do I send and receive email with my @me email account

I want to drop yahoo as my email provider, so how do I send and receive email using my @me account. Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

Hi stephraerae,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iOS: Adding an email account
http://support.apple.com/kb/ht4810
iCloud is one of the options you can choose for your email provider.
iCloud: Set up iCloud Mail on your devices
http://support.apple.com/kb/PH2621
This article includes the specific iCloud server settings:
iCloud: Mail server information
http://support.apple.com/kb/HT4864
Hope that helps ...
- Judy

What setting do I need to use to send and receive Business Catalyst account e-mail on my smartphone?

I have a new Samsung Galaxy s4 Smartphone and want to be able to send and receive my Business Catalyst account emails from the phone (same as I can with outlook). What settings do I need to put in the phone to do this (for example: pop-3 server name and port numbers)?

Here's the guide to configuring email clients for BC: http://kb.worldsecuresystems.com/kb/email-configuration-guide6.html
Here's Samsung's guide to setting up generic email access on the S4: How do I Set Up POP/IMAP Email on my Samsung Galaxy S® 4? : AT&T Cell Phones | Samsung

Unable to setup pop3 email on new ipad, it only allows an imap4 account, this has now stopped pop 3 sending and receiving on iphone 4s, what do i do?

it only allows an imap4 account, this has now stopped pop 3 sending and receiving on iphone 4s, what do i do?

its a personal ipad, its my wifes actually.. bought it last week. i have managed to finally add it as a pop server... wasnt giving the option to choose imap or pop just automatically ? Emails now seem to be incoming again however the issue is sending an email.... all settings are correct for a blueyonder email account, it shows in sent items but not received at the recipients end..
I know its an issue with the SMTP settings on the ipad and iphone as sending it from online mail works fine... very strange? any advice

One email account sends and receives emails, the other does not

I have two different email accounts set up on my phone. They both worked, until I had my phone was serviced and wiped clean. Now one account sends and receives and the other does not. I have tried everything from deleting the account on the phone and rebooting, to changing my password. When I reactivate the account I get a message saying "activation server" and that messages will be forwarded within 20 minutes and they never come. I'm not sure what else to try.

Hello dalite and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having email issues.
What type of email are you unable to receive - Gmail? Hotmail? Internet Service Provider hosted email?
What is your BlackBerry PIN to investigate?
When you go to send an email using this account, do you get an error? Are you able to select this email account for sending an email?
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Trouble send and receiving messages and trouble calling people or receiving phone calls

Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.

Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Display sender and receiver interfaces in CCMS

Hello CCMS Specialists,
I've a question regarding CCMS and SNMP TRAPS.
In my case I'm sending the alerts to a Third Party application via SNMP TRAPS. In CCMS I don't get the information about a specific Interface and therefore I can't send it to a third party application.
My question is: is it possibile or how to send the information from an interface (sender and receiver information) via CCMS to our Third Party application?
For example, if there has been an Internal HTTP error. We don't get the details about the interface. Hoe could we display those information as well?
Kind Regards,
Kamran

hi,
And also check spro -
> financial accounting -
> financial accounting global settings -
> correspondence -
> define correspondance check the variant bcause all are standard variants so the one which we require need 2 make changes......... create our variant..
if useful assign points....
regards,
santosh kumar

WBS Element as Sender and Receiver in New GL Allocation

Dear Experts,
Please need your advice how to configure WBS Element as Sender and Receiver in New GL Allocation, since this field is not activated in New GL Allocation (FAGLGA11 - General Ledger: Create Act. Assessmt) ?
We already tried to activate this field, but the system forced to include this field also in the total table ( FAGLFLEXT). And since we can't add the WBS Element as PSP_PS_NR, we add as ZZPSP_PS_NR to the total table. But the issue come up, since the transaction(FAGLFLEX) cant detect this field, and show error as below "Field FAGLFLEXT-PS_PSP_PNR is not defined in the ABAP Dictionary"
Please kindly advise. Many thanks for your valuable inputs

Hi,
I believe you have added the field in these 2 places:
1. Add field 'ZZPS_PSP_PNR' (WBS element) to FAGLFLEXT table in configuration (menu SPRO > Financial accounting (new) > Financial accounting global settings (new) > Ledgers > customer fields > Include fields in Totals table) and activated the same.
2. And, added this field in 'Assign scenarios and customer fields' to your leading ledger.
WBS element data gets populated by assigning ZZPS_PSP_PNR to the ledger itself (IMG: Assign Scenarios and Customer Fields to Ledgers -> select ledger -> "custom fields"). Necessary field mapping logic is generated by this customizing for the system to populate ZZPS_PSP_PNR in FAGLFLEXT and FAGLFLEXA.
Afterwards, please regenerate GLU1 structure by running report RGZZGLUX while no posting is being made in the system.
I believe this will help you.
Best Regards,
Vanessa.

Sender and Receiver Skype Accounts Regarding Histo...

Similar Messages

Maybe you are looking for