Sender and receiver

Dear forum,
1 sender and receiver only can happen in CO? why not in FI?
2 sender and receiver are referring to cost object?
3 when use secondary cost element, the sce must be linked to a sender and receiver only can work?
Thanks alot

Dear,
In CO the cost is carried through an object where as in case of FI it is GL Accounts,
that is why in CO it is Sender (Cr) and Receiver (Dr). The Cost Object can be, Cost Center, IO, Order, Sales Order, WBS Element & Profitability Segment.
Secondary Cost Elements are used in case of Activity Rates upload, Allocation etc or when you want to do posting only in CO, you dont want any implication in FI.
Hope it is clear to you.
Br,Vivek

Similar Messages

Cannot send or receive email from the cloud. all updates are competed and everything else is working fine on MAC. iPad sends and receives fine. any ideas.

On Imac I am not able to send or receive messages. All software is updated. My iPad that uses the same email address and the Cloud, sends and receives just fine. It is not "the colored" thing that is spinning but the little black and white circular icn that is spinning away. My other email address is functioning fine. It is merely the ICLOUD based email that is acting up. Any ideas?

First try deleting the account and reinstall it.

Trouble send and receiving messages and trouble calling people or receiving phone calls

Hello everyone, I bought a Blackberry Q5 one year ago and has worked perfectly since but on christmas day I had was struggling to send message to people I thought nothing of it since it was christmas and people would be wishing there families and friends a merry christmas. So i just carried on as usual not aware that the problem was much worse then i thought, since then I have tried time and time again to try text people and call them but nothing would happen.
The Problems I am experiencing,
Everytime I try sending a message it fails and times out after a while doesn't matter whom they are being sent to it's the same story no matter who I send them to, and then of course when i try calling someone the phone goes to the calling screen but doesn't make a sound for atleast 10 seconds then a message pops up saying "Call Failure, The call could not be connected. Please try again later". This message appears even when I ring '789' which is the number to find out what my balance is on my contract.
At first I thought it was the Sim what was cauing the problems but when i swapped it into another Virgin phone i received quite an alarming amount of messages what would not come through on my phone, this is when i realised I am not just struggling to send messages but to receive them as well. I have scoured the internet for possible answers but nothing has worked, so far I have tried manually scanning for available networks and selecting the correct one which did not change the problem this didn't make things better nor did it make things worse.
I have also tried changing the data services while roaming settings which again did not make any differences, I have tried changing network mode no changes again, turning the mobile network off all together and then turning it back on after 5 minutes no success there either. I have even reset the phone back to factory setting to try and fix the problem, but no, the problem still will not go away.
Please if there is anyone out there who has any ideas on how to fix what is happening to my phone please do give me your advice, at this moment I really need a miracle to come around at the next corner.

Hi rhupa!
Here is an article that will help you troubleshoot this issue:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Mail Connection Doctor shows one or more red dots in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

TS2755 I have 3 phones on one Icloud account. It has been this way for over a year with no issues. After and update on of the lines started getting text messages from all 3 phones. We fixed the send and receive and it was fixed. It is doing it again.

I have 3 phones on one Icloud account. They have been this way for over a year. After an update last week one of the phones started getting messages for all of the other lines. We fixed this under the send and receive under settings. It was fine for a few days. Suddenly it started happening again. Yesterday after two hours on the phone I changed my apple id and it is still happening. Before that Verizon had told me to turn off my imessage when that happened I could not get any texts at all from other Iphone users.

Make 3 different iCloud accounts and use ONLY for iMessage. That will permanently fix your issue.

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with sending and receiving e-mail through exchange [GMail]

Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhone

http://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer?

Is there a software in which I can hook up my iPhone 4s to my computer and send and receive text messages and calls (via headset) through my computer? Whether it's free or cost money, can someone please give me a name of a program or software that allows me to do this? I can't seem to find anything like this for the iPhone.

No.

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

Microsoft Exchange is not updating local Outlook - Send and Receive issues.

Hi everyone,
Our office has just moved to using Office 365 business edition where we are sending and receiving emails via Microsoft Online Exchange.
It has been running for 3 days so far and we do love the product however we are having a major issue at the moment and that is our local outlook 2010 and 2013 folders are not constantly synching with the exchange. We are finding that it can be hours
before emails push through to our inbox and we will receive 20 emails all at once. It is also occuring when we send emails, they will sit in the Outbox and the only way it seems to get them to send or receive is to close Outlook and re-open the program.
We also find that sometimes when we are out of the office and using the 'Outlook Web App' that emails we send to clients via here and not always synching with the local Outlook its a bit of a mess really. This is not great as we are a legal office
and need to attend to emails urgently at times and must have all emails arrive locally.
Can anyone shed some light on how this matter can be fixed urgently?
Thanks
Lisa

Hi,
As far as I know, for the sync issue in the on-premise Exchange server environment, we can check if we have selected the option ”send immediately when connected”:
Outlook 2013: file>options>advanced> send and receive> send immediately when connected
However, since your server is Exchange online, I recommend you ask for more professional help on our Exchange online forum:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
Thanks,
Angela Shi
TechNet Community Support

How can I be sure iMessage is sending and receiving via WiFi and not using my text message allotment?

My daughter has a new iPad Touch and I have a 3GS with 5.0.1. She wants to send and receive a million messages from me each day day with iMessage. Right now, I have Settings>Messages>Send As SMS - OFF. With this current setting, can I be assured I am using the WiFi only and not burning my SMS allotment from ATT? Am I safe to restore Send As SMS setting to ON? In other words, will the default method of transmission of text messages be through the internet, when that service is available?
Without waiting for a $1000 bill from ATT for text messages, can I ensure I'm sending and receiving iMessages through the WiFi only?

Well, I just noticed that a shaded iMessage appears in the enter text window when sending to her iPod Touch and my messages appear in a blue balloon, with her replies are in gray balloons. When sending to someone with another kind of phone, the text entry window says "Text Message" and my balloons are green. I guess this is an indication that the iMessage system is working and I'm not blowing through my SMS allotment from ATT.
With these indications, can I be sure I'm messaging through the iMessage system, or the carrier's SMS service?

Sender and receiver

Similar Messages

Maybe you are looking for