Sender Channel not working(RFCSenderR3)

Hello All,
In my XI 3.0 QA env...there is one service "RFCSenderR3" which is not showing any messages in message monitoring ,but if i check in Communication channel monitoring for that service it shows as :
Sender channel 'RFCSenderR3' for party ",service'RQ1'
ERROR can not instantiate RfcPoolException:error initializing
RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException:can not connect to destination system due to :com.sap.mw.jco.JCO$Exception:(103) RFC_ERROR_LOGON_FAILURE:Mandante 101
Here RQ1 is the R3 reciever system.
And i have checked rfc connection from R3 end which shows it is fine..
Can any one suggest me ,exactly wat need to be checked to solve this problem .And I am not sure what to check from R3end also....
can any one guide to me ..
Best Regards
raki

Hello All,
Thanks for helping yaar,the problem got resolved .
After verifying the user Id & password , I restarted that particular channel from Communication channel monitoring.Then it got worked with successful execution.
Thanks one and all for helping me out.
Best Regards
Rakesh

Similar Messages

JDBC Sender channel not processing the messages

Hello,
From yesterday onwards JDBC Sender channel not processing the messages. In CC monitoring it is showing in Green Led and status is functioning. Cahnnel is polling for messages to DB server as per polling interval. But it is not processing the msg's. Under Processing detials for cluster node it is showing only "Processing Started" for each polling interval.
I have done the check in DB server by executing the query in the channel, whether there are any records are exisitng or not. There are 1000+ records.
Previously the parameter "Disconnect from DB after processing each message" was not set. I have set the parameter and activated in Productiion. Still the messages are not processing by channel
What was the problem? How to rectify with this.
Cheers
Veera

Check in the Visual Admin >Cluster> "LOCKING ADAPTER"
we get a option of Display Locks .Check for an entry with
NAME : $XIDBAD.JDBC2XI
reset the locks and restart the CC ,now it works fine.
Note 1083488 - XI FTP/JDBC sender channel stop polling indefinitely(04/04S)

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Left channel not working--it's a logic problem, but I can't debut it! HELP!!!

I'm using a SB Audigy SE card on my XP machine. In the past, I've made good music files from CDs and records (remember those?), but I have not used the thing in about 18 months, and now I'm having a weird problem.
I get output only on the LEFT channel. I'm sure it's not a problem with the input source, because I've used a cassette player and a turntable, and with both, I get output only on the left channel. This happens even when I reverse the phono cables from either device. That tells me the problem is not in the cabling leading from my device to the SB card.
I checked the speakers using the Audigy Speaker Settings application, and it shows that both speakers are working properly: when I click on CHANNEL, I get the words "left channel" and then "right channel" successively on the proper speakers. Same when I click NOISE.
This shows me that the problem is not on the (physical) output side: if it were, I would not get the words "left channel" on that channel, and then the words "right channel" on the right channel. As well, I can play videos (e.g. Youtube) and get sound on both channels.
My guess is that somehow there is some setting somewhere in Audigy that is saying "process only output to the left channel." But I cannot find any setting that might be doing that.
Anyone got any ideas???? I'm stumped.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

Left rear channel not working - Xfi

My left rear channel is not working. Its not the speakers nor the connections, its the soundcard (Xfi XM). I know this because I switched the front/rear connections to test them and the same problem?channel did not work. The problem is in both Vista and XP, so its not the software/drivers either. Any solution to this? Thanks.

Originally Posted by deafguy999
OOPS, I meant "right channel not working"! Sometimes I don't know my L from my R.
ALSO, CDs play properly--and my speakers are connected only to the sound card.

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

HTMLDB_MAIL.SEND does not work with 11g

Hi Guys,
I have a simple application that uses HTMLDB_MAIL.SEND. I am running APEX 3.0 against an 11g database. When run against a 10g DB all is good. But with 11g I get
ORA-24247: network access denied by access control list (ACL)
I looked up the error which recommends altering ACL stuff, which I know nothing about. Is there a simple way to get rid of this error.
O.

Hi,
I have the same problem as you.
Colud you please explain me how did you resolve it.
Thanks
HTMLDB_MAIL.SEND does not work with 11g

IMessage send is not working on my ipad2. I can receive only.

iMessage send is not working on my ipad2. I can receive only.

make sure you are typing your message in the line BELOW the line with the camera icon, soon as you type in that location the send button will become active.
Regards, Ct

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Have been trying all weekend to upload Jpegs- either Send does not work or shows files uploading then shows error- never had this problem with Send Now-16 images total size 92MB-largest image 13MB

Hi Ciaran19,
Are you sending files from the Adobe Send interface, Adobe Reader, or the Outlook plug-in?
Have you checked to see whether the files that you're sending appear in the Recent Files/Sent Files list when you're logged on to https://cloud.acrobat.com? (It could be that they're uploading, but not being sent.)
It would also be worthwhile to send the files in smaller batches, to see whether a particular file or files is problematic, and causing the error.
Please let us know how it goes. If you're still having trouble, please let us know where you're sending from, and whether you're able to send the files in smaller batches. It would also be helpful to know the exact error message that you're receiving.
Best,
Sara

MOVED: MSI K8N SLi Platinum Duall Channel not work? Please help

This topic has been moved to AMD64 nVidia Based board.
MSI K8N SLi Platinum Duall Channel not work? Please help

Quote from: iggsy on 29-July-05, 06:03:49
Ok I unerstand but i have 201mhz whay 201 instend 200 ?!
Mine does the same thing at the startup screen but not on cpuz...go figure. Just my 2 cents.

[svn:bz-3.x] 5036: Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS /3.x branch.

Revision: 5036
Author: [email protected]
Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
Log Message:
Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-347
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

Revision: 5036
Author: [email protected]
Date: 2009-02-23 06:24:31 -0800 (Mon, 23 Feb 2009)
Log Message:
Bug: BLZ-347 - Secure amf polling channel not working correctly on IE in BlazeDS/3.x branch.
QA: Yes
Doc: No
Checkintests: Pass
Details: This is BlazeDS part of the fix. For MSIE over HTTPS, we need to add additional Cache-Control headers.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-347
Modified Paths:
blazeds/branches/3.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.java

File Sender Communication Channel not working

Hi All,
We have one file sender channel which sends file after every 3 hours.
But currently it has stopped the processing of file.
If we see in RWB it shows that "Correctly configured and started",but if we start and stop the chanel it doesnt show any processing started message.
File is there in the folder but the channel doesnt poll the folder to pick up the file.
We have refreshed the cache and activated the channel again.
But still no luck,does anybody have any idea?

Hi Shweta,
Please check the parameters of your File adapter. There can be following possibility if File adapter is not picking the file :
1. File adapter is not active
2. Incorrect File name, Directory name or path,
3. File does not exist in the source directory.
4. If you are accessing file from other server (use FTP protocol) check you have READ and WRITE access.
Thanks
Farooq.
<b>*Rewards points if you find it useful*</b>

Communication channel not working -- No Adapter Registered for this channel

Hi Experts,
I see the status of one of my Communication Channels (In RWB Communication Channel Monitoring) as
"No Adapter Registered for this channel".
I saw one of the threads related to this but could not fins a suitable reason for it as our issue seems to be different here.
We have recently deployed the SFTP adapter and PI team is testing this communication channel and they got this error.
I checked and found that SFTP adapter (in the JAVA EE applications) was not working and when I tried to start ,its giving error
failed to start.
additional status message as
Status Details: Cannot load class "com.advantco.pi.af.adapter.sftp.SPIManagedConnectionFactory". Possible reasons: 1) class file cannot be found in the JARs located in the RAR file,
2) class file cannot be found in referenced loaders,
3) failed to initialize some static block(due to unhandled exception),
4) failed to load or there is incompatibility with some native parts, or
5) cannot load a class related to it, due to some reasons above.
Could you guys suggest from where exactly is it trying to pick up the files.
is it u201Cu2026/j2ee/cluster/apps/xxxxxxx/SFTP Adapteru201D ????
Can anyone suggest the possible reasons and the root cause of it
Regards,
Yogi

Hi Yogi,
i am glad you solved the problem.
If you have any issue with the Advantco SFTP adapter, best is to send an email to "support at advantco.com" directly.
Peter Ha * SAP NetWeaver PI Architect * Advantco International LLC
www.advantco.com

Sender Channel not working(RFCSenderR3)

Similar Messages

Maybe you are looking for