Sender Communication Channel Problem
Hi,
We have some issues with respect to files picking up and getting archived without processing.
Interestingly, there is no trace in comm monitor except for Processsing started and Processing Finished.
It doesnt happen at all times, moreover we need to reprocess the same file again and again until XI picks it up for processing,
The only think i dont understand is that how those files are picked and archived without processing.
Also note that I have configured multiple file names to be picked in the communication channel.
Please help me in this regard.
Krish
Hello Guys,
Thanks for your suggestions.
I have already made all these checks whether any other scenario runs with the same directory configuration.
Moreover the interesting point is that there is no log in the communication channel. The files are just getting archived without a log.
Moreover, I had checked in my Development and Test Environment whether any other interface is referring the same directory or not.
One more thing which i found out was when the file path is been changed to some other directory , it works well, I believe this is something to do with the FTP server directory, some authorizations or permissions.
But still, From xi point of you, it is confusing that how it can be archived without being processing.
Regards
Similar Messages
-
JDBC Sender Communication Channel Problem
Hello everybody,
I have a sender communication channel, it is with green Functioning status in channel monitor in runtime workbench, and the log says "Process started" for every pool as configured, but it doesn't return any data to XI, and there's data to be taken, the problem started a few hours cause it was working fine, I've already executed a Complete refresh cache in SXI_CACHE, and changed the channel from Active to Inactive in ID, and Stopped and Started it again in RW, it doesn't give any errors, but it doesn't bring back any data that should be, any suggestions or maybe any information on how to refresh totally those channels????, thanks in advance.
Regard's
PaulHi Paul
Check for JDBC adapter locks. cpa cache locks are not relevant to your problem.
Moreover check with the visual admin logs as well. if you can get info about the issue you have
Thanks
Gaurav -
JMS Sender Communication Channel problem
Hi XI gurus!!
I have a JMS Sender Communication Channel that cannot get information from JMS TIBCO queue.
In defaultTrace.XX.trc I see the following information and errors:
#1.#00144F249F1500C70000087D00002D8300044A22A193A198#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000087E00002D8300044A22A193A201#1207412506993#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000087F00002D8300044A22A193A552#1207412506993#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueSession qsess=198151 qconn=45502 tran=true ackmode=1#
#1.#00144F249F1500C70000088000002D8300044A22A193A670#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Info##Java###Sucessfully created session {0} for profile {1}#2#com.tibco.tibjms.TibjmsQueueSession@3a5f233#
{GenericConnectionProfileImpl
{Description=ConnectionProfile of channel: JMS_Sender_loginCheckReq_001on node: 21291150 having object id: 7e7ee107bc2031d2bc79fa2fce15bbed,
JmsMessageSelector=,
ConnectionFactoryConstructor=null,
ConnectionFactoryFactoryInvocation=null,
ConnectionFactoryInvocations=[],
DestinationConstructor=
{ConstructorInvocation
{className=null,
invokeParams=[]
DestinationInvocations=[],
MessageInvocations=[],
DestinationName=null,
User=,
Password=,
isJmsSessionTransacted=true,
InitialContextEnvironment={java.naming.provider.url=190.10.0.133:9222, java.naming.factory.initial=com.tibco.tibjms.naming.TibjmsInitialContextFactory},
LookupConnectionFactory=QueueConnectionFactory,
LookupDestination=GALP.PRD.TIGERC.LOGIN.REQ,
SerializedConnectionFactoryPath=null,
SerializedDestinationPath=null,
Flags=0000000000000000000000000000000000000000000000000000100000000010
#1.#00144F249F1500C70000088100002D8300044A22A193A7EE#1207412506994#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildSessions()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088200002D8300044A22A193A85F#1207412506994#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088300002D8300044A22A193B153#1207412506997#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Error##Plain###2008-04-05 17:21:46 [161906789 SAPEngine_Application_Thread[impl:3]_52] [TIBCO EMS]: createQueueConnection qconn=45503 qconfac=QueueConnectionFactory[url=tcp://190.10.0.133:9222;clientID=null;Properties={}] user=null#
#1.#00144F249F1500C70000088400002D8300044A22A193E3CF#1207412507009#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088500002D8300044A22A193E571#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1500C70000088600002D8300044A22A193E64B#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeDestinationInvocations#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Exiting method#
#1.#00144F249F1500C70000088700002D8300044A22A193E714#1207412507010#com.sap.aii.adapter.jms.core.connector.ConnectorImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildMessageProducers()#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#SAPEngine_Application_Thread[impl:3]_52##0#0#Path##Plain###Entering method#
#1.#00144F249F1508770000000000002D8300044A22A83A6308#1207412618584#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: received msg from daemon conn=45502 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
#1.#00144F249F1508770000000100002D8300044A22A83A650C#1207412618585#System.err#sap.com/com.sap.xi.mdt#System.err#EFFIGUEIREDO#7191##sappix02_X02_21291150#XIAPPLUSER#81664000032811ddaadc00144f249f15#Thread[TIBCO EMS TCPLink Reader (45502),5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Error##Plain###2008-04-05 17:23:38 [2092826462 TIBCO EMS TCPLink Reader (45502)] [TIBCO EMS]: post msg to session sess=198151 cons=261547 seqid=40664365 msgid=ID:EMS-SERVER.91446ECB042B480:12545#
In the last two lines we can see that SAP XI do a connection to TIBCO and is getting an unknown error, even in debug (note 856346) I cannot get any information.
Actually we are running SAP XI 3.0 SP21, but this was working fine in SAP XI 3.0 SP17. We have more than 100 Communication Channels working fine and only is having this strange behavior.
BTW if we put manually information in TIBCO QUEUE it works fine, but automatically doesn't pick the message.
ThanksHI,
As per the trace details given please consider few of the below options....
What do u see in adapter monitoring tool for JMS adapter?
http://hostname:5XX00/mdt/amtServlet
Did you follow the document on correlation of JMS messages?
In communication channel You have to set
Correlation ID -> XI conversationID
XI message ID->GUID
XI Conversation ID -> JMS correlation ID.
Now in the custom J2EE application you should set
jmscorrelationid of message before sending in to queue to jms correlation id of message before receiving from the queue.
This thread deals with the issue..
JMS Queue monitoring
Check if the JMS Sender adapter EOIO is with serialized messages
Thanks
Swarup -
Adapter Module not working in Sender Communication Channel working in recie
Hi
I have written one adapter module. IF i give that Adapter Module in Sender Communication channel its not working. If i give that in Reciever Communication Channel its working. If i mention in both the channels then its working in sender communication channel also.But in only sender communication channel its not working in only reciever communication channel its working Can any one tell me why its happening
Thanks & Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar Bhi
if its problem with my code why its working if i give the adapter module in both the communication channels?If i give in only sender communication channel the module is not invoking. its not showing any auditlogs.Can any one please help me
OUTBOUND is for sender
INBOUND is for reciever right.?
the following code i have written
public ModuleData process(
ModuleContext moduleContext,
ModuleData inputModuleData)
throws ModuleException {
String SIGNATURE =
"process(ModuleContext moduleContext, ModuleData inputModuleData)";
Object obj = null;
Message msg = null;
String filename = null;
AuditMessageKey amk = null;
try {
obj = inputModuleData.getPrincipalData();
msg = (Message) obj;
System.out.println("&&&&&&&&&&&&&&&&&" + msg);
if (msg.getMessageDirection().equals(MessageDirection.OUTBOUND)){
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.OUTBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
}else{
File filename1 = new File("
10.7.1.43
XI
source","text.txt");
filename1.createNewFile();
amk = new AuditMessageKey(msg.getMessageId(),AuditDirection.INBOUND);
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> etHostName: Module called"+ i++);
System.out.println("**************" + amk + "***********");
} catch (Exception e) {
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,">>>>>>>>>>>>>>> GetHostName: Error Module called");
e.printStackTrace(System.err);
ModuleException me = new ModuleException(e);
throw me;
// Read the channel ID, channel and the module configuration
try {
Hashtable mp = (Hashtable)inputModuleData.getSupplementalData("module.parameters");
if(mp != null){
filename = (String)mp.get("FileName");
Audit.addAuditLogEntry(amk,AuditLogStatus.SUCCESS,"Host >>> Element Name is set to {0}"+filename );
}else{
Audit.addAuditLogEntry(amk,AuditLogStatus.WARNING,"HostElementName parameter is not set. Default used: HostName.");
filename = "FileName";
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
try {
XMLPayload xmlpayload = msg.getDocument();
DocumentBuilderFactory factory;
factory = DocumentBuilderFactory.newInstance();
DocumentBuilder builder = factory.newDocumentBuilder();
Document document =
builder.parse((InputStream) xmlpayload.getInputStream());
Element rootNode = document.getDocumentElement();
if (rootNode != null) {
Element childElement = document.createElement("filename");
childElement.appendChild(document.createTextNode(filename));
rootNode.appendChild(childElement);
// Transforming the DOM object to Stream object.
TransformerFactory tfactory = TransformerFactory.newInstance();
Transformer transformer = tfactory.newTransformer();
Source src = new DOMSource(document);
ByteArrayOutputStream myBytes = new ByteArrayOutputStream();
Result dest = new StreamResult(myBytes);
transformer.transform(src, dest);
byte[] docContent = myBytes.toByteArray();
if (docContent != null) {
xmlpayload.setContent(docContent);
inputModuleData.setPrincipalData(msg);
} catch (Exception e) {
e.printStackTrace(System.err);
Audit.addAuditLogEntry(amk,AuditLogStatus.ERROR,"Cannot read the module context and configuration data");
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData;
Best Regards
Ravi Shankar B
Message was edited by:
RaviShankar B
Message was edited by:
RaviShankar B -
How can One sender communication channel pick two file from two location
Hello
I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...>
Soumitra Sinha wrote:
> Hello Vijay
> I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
> i have two folder folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can pick file from two location and how one receiver channel can put in two location.please help me..
Ok now I get your requirement.
you cant achieve this - how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
easy way - involve IR mapping
else
have a adapter module to define your dynamic configuration.
Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
Set the dynamic directory/file name etc for your receiver adapter. -
Sender Communication Channel Monitoring Error
Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AMHi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful -
Sender Communication Channel Error
Hi all,
iam working on JDBC scenario.For this iam using party and business service.
iam getting following error at jdbc sender communication channel.
Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
Erlier it worked fine.But now iam getting this problem.
We are having some other channels which r working fine.
any ideas......?
Thanks,
Sreedhar Goud.1. If you know the user, who having admin rights;
1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
2. Click on "New" button ( this is on Logon Dialog box)
3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
4. Say "Next"
5. Enter "User Name","Host" and "Port" and Save the data.
6. Select User and click on "Connect"
2. Did you forget the J2EE_ADMIN password? Just follow below steps:
Just follow below steps:
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2. "Switch to configuration mode" for that Click on "Pencil" icon;
3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
4. cluster_data --> server --> cfg --> services -->
click on "Propertysheet com.sap.security.core.ume.service
select properties:
ume.superadmin.activated = True
ume.superadmin.password = <enter password >
then say "OK"
Click on "Pencial ICON.
5. Save & restart Java Engine.
Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue. -
Sender communication channel stopped after error "Connection Timed Out"
Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio BoniHI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio -
Files not getting picked up using Sender Communication Channel frm MDM sy
Hi Experts,
XI sender communication channel is configured to pick up any files coming from MDM system from the following path
/XXX/XXX/mdm/mds/XXX/XXX/Material_Master/Outbound/P33/P33_R3_PORT/Ready
Earlier we had the scenario working properly that created idocs in R3 system.(MDM>XI>R3)
Currently i tried to test the scenario again but i don't see an entry in the sxmb_moni or tried checking whether the sender communication channel is working properly it showed polling correctly in RWB.The files are already sitting in the the above path.XI should be picking it up but don't know what the problem is?
I also tried a test in RWB>Integration Engine>Test Message put the payload and it was able to create idocs in R3.So i concluded there is an error in picking up message from MDM.
Is there any log available for the commmunication channel where i can see error info of whether any files picked up or not.
Please suggest me what all can be done to to ensure the CC is picking up the files.
Earlier responses highly appreciated.
B'Rgds,
SudhansuHi,
In addition to the RWB channel check suggested by Aamir, you should also check if the channel is
1) Active in ID
2) Channel is not locked in VA, if it is locked then your status in RWB will show processing started but the files wont be picked up...for more details check the unlocking procedure mentioned in this thread:
JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED
The unlocking procedure is the same for FILE and JDBC....
Regards,
Abhishek. -
Using common SOAP Sender Communication Channel.
Hi,
Env: PI 7.1
Scenario: Same SOAP Sender communication channel is used in more than one scenario.
Properties "Use Encoded Headers" and "Use Query Strings" are checked.
Problem: SOAP channel is getting binded with the first interface/call. Subsequent calls from other interface proxies fails. It always shows the interface which used this channel for the first time.
My aim is to use the common channel in multiple scenarios and do not want to create separate channel for each.
This was working fine in PI 7.0.
Please help.A workaround would be creating multiple sender agreements using the same channel. For this while creating the sender agreement, use the option "Sender uses virtual receiver". This was u may use same set of sender service and sender interface with same channel.
Regards,
Prateek -
2 JMS Sender Communication Channels polling 1 MQ Queue
Hi Experts,
I have a situation where 2 JMS sender communication channels are polling 2 different message type data (via content conversion in JMS) from 1 MQ queue. However adapters are having problem polling the right message from the queue.
Is this something that is not possible?
I know that we can possibly use 2 MQ queues - one for JMS 1 with message type 1 and the other for JMS 2 with message type 2
OR
1 JMS with 1 common message type with 1 MQ queue.
But I want to confirm whether my current situation is suppose to work or not.
Thanks,
Jay>
Jung Sun Ko wrote:
> Hi Experts,
>
> I have a situation where 2 JMS sender communication channels are polling 2 different message type data (via content conversion in JMS) from 1 MQ queue. However adapters are having problem polling the right message from the queue.
> Is this something that is not possible?
Maintain different queues for different message types.
The adapters else will just pick the message that comes to the queue first based on the polling time irrespective of the message type. It is not intelligent enough
>
> I know that we can possibly use 2 MQ queues - one for JMS 1 with message type 1 and the other for JMS 2 with message type 2
> OR
> 1 JMS with 1 common message type with 1 MQ queue.
>
> But I want to confirm whether my current situation is suppose to work or not.
>
> Thanks,
>
> Jay
Hope the above replies answers your question -
Sender Communication Channel for Integration Scenario IDoc - XI - IDoc?
Hello All,
One general question. I have to configure an IDoc - XI - IDoc Scenario. For this Scenario I have to configure an Receiver Communication Channel (IDoc Adapter) to the Backend System but what about Sending Communication Channel for the Sending R/3 system.
Is the (IDoc) Communication Channel from Sending system to XI required to configured?
Many thanks in advanced!
JochenHi Jochen,
for sending IDOCs from SAP to XI, sender IDOC adapter is not required. when XI will send the IDOC to a SAP system, then receiver IDOC adapter is needed.
Thanks,
Rajeev Gupta -
BIC Module Error in Sender Communication channel for EDI to File scenario.
Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
AbhishekHi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish -
File Structure - Sender Communication Channel
Hi All,
My Sender flat file structure is below like this
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
Filed1|Field2|Field3|Field4|Field5|Field6
I did the Sender Communication Channel configuration - Content Conversion
Document Name : XXX
Document NameSpace: XXXX
Recordset Structure: MT_Test,*
Recordset Sequence: Ascending
Key field Type: String Case-Sensitvie
MT_Test.fieldNames: Filed1,Field2,Field3,Field4,Field5,Field6
MT_Test.fieldSeparator: '|'
MT_Test.additionalLastFileds: ignore
MT_Test.endSeparator : 'nl'
ignoreRecordsetName: true.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_Test xmlns:ns0="http://XXXXX">
<JOBS />
</ns0:MT_Test>
What is the Issue, where i missed some thing, In message mapping, its correct..
Thanks.
SRSR,
I am still little confused with your below statement.
But its pick the file, In SXMB_Moni show Currect...
But in Runtime workbench, in Communication Channel moni, it show below like this,
>
> <?xml version="1.0" encoding="UTF-8" ?>
> - <ns0:MT_Test xmlns:ns0="http://XXXXX">
> <JOBS />
> </ns0:MT_Test>
You mean to say that in MONI, the mapping output is fine, but when you check the output at RWB -> CC Monitoring for the Sender Channel, then you get the above mentioned XML?
This means that there is nothing wrong with your source CC settings. If the entry in RWB -> Sender CC is wrong, your MONI entry will never be right. So, this is really weird.
What is the source structure that you have defined in DT?
Regards,
Neetesh
Edited by: Neetesh Raj on Sep 29, 2009 2:31 PM -
Error in sender communication channel
Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
KishoreK.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore
Maybe you are looking for
-
How do I get microsoft producer effects on a mac
I am flipping my chemistry classroom, and need a source for MACs that can give me the same results as Microsoft Producer, IE video of me while I am showing a powerpoint, any suggestions?
-
BW Variables not showing up in universe based on BEX query
We've been trying to create BO Universes on BEx Queries. When we create the connection, it reads the query into the Universe, however, it does not always read all of the BW variables associated with the queries. We've moved all filters in the BEx Q
-
Approximate operator and recursive call function in abap
Dear expert, Please give me an example about Approximate operator and recursive call function in abap thanks so much
-
New macbook pro 2011 running very slow
hello, i have a late 2011 mbp 15 with 2.4 giga hetz 2 gen intel core i7 processors (quad core). and a ram of 4gb, 1333 mega hertz DDR3. personally, this is one of my favourite dream gadget because it's extremely hard for me to afford but extremly pow
-
Setting an icon on the top right zone of screen
Nice day.. I got a question: I need to set an Icon which has to be set all time to the top right corner of the screen, no matter what size is the screen... how do I achieve it ? I will appreciate your help,