Sender communication channel stopped after error "Connection Timed Out"

Hi experts,
in our scenario we have an asyncronous sender communication channel with polling every 6 seconds to an external FTP server.
Yesterday evening a "Connection Timed Out" error came.
After this error the polling stopped but channel in communication channel monitoring still remains green.
So status green but no polling.
To solve this problem we stopped and then restarted channel from CC monitoring.
The channel is configured "manually".
The question is: Is it possible to avoid this problem? Maybe there's a parameter in configuration to set?
After a time out error the channel must go on polling, it should not stop. Or it must shows red status.
Thanks
Fabio Boni

HI,
I think PI level is "SAP J2EE Engine 7.00 PatchLevel 109886.44"
Thanks
Fabio

Similar Messages

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

TCP active open: Failed connect() Error: Connection timed out

Hi,
There is one message which can't be delieved to the recepient with error " TCP active open: Failed connect() Error: Connection timed out" This is the error that we found in the mail.log_current file.
I have no problem sending email to the same address from my hotmail account.
any suggestion ?
Thanks,
Joe

The message can only mean one thing. Your server cannot connect to that host.
It's possible that the remote system is lying to your Messaging Server, and that's gotten it confused. Some firewalls do this by repeating the entire capability string from the server behind them, but can't actually handle all the capabilities.
PIX firewalls do this.
When you connect, they pretend to be able to "startls", but if you try, they hang up. They appear to handle "EHLO", but when you try, they hang up.
You can put debugging on the tcp_local channel, and see the actual conversation, if you like.
master_debug and slave_debug go into the imta.cnf definition line. MM_DEBUG=5 goes at the end of your option.dat file.
then
imsimta cnbuild
imsimta restart
will attempt to send the message. You will want to back the changes out, as you'll get lots of extra log files you really don't need.
Post the log file, and we can see what's happening.

Nokia Internet Radio Error: Connection Timed Out. ...

Hi,
I'm having an issue with the Nokia Internet Radio application on the Nokia N95. The app launches ok but if I try and browse the station directory or perform a search I get the error 'Connection Timed Out. Try Again' This happens almost instantly i.e. it doesn't look like it's even trying to connect. If I go to the shoutcast site and click on the 'Tune In' button next to a station the Internet radio app launches and I get an error saying 'General: System Error' and the application closes then goes back to the browser and a message saying 'Web: No Gateway Reply' The application worked fine up until recently. I upgraded to FW V 21.0.016 and hasn't worked since so it may be that this has caused the problem. I've removed and re-downloaded \ re-installed the software but still get the same issue. Web browsing works fine, so I know my internet settings are fine, and the old open-source version of the radio player even works so it's just an issue with this app. Any advice on how to fix it would be much appreciated. Thanks.

I had the same problem and I fixed it. For me, it was because I am on the Rogers network in Canada. Regardless of where you are many cellular neworks use firewalls and something called NAT (Network Address Translation). Nokia should really make people aware of this because probably 50% of people around the world have this problem. The solution for me was to use Rogers VPN or Public IP to access the internet. Rogers blocks access to this internet connection so you have to add the service to your account for $10 per month but I have heard that other carriers like FIDO have not blocked access to it.
On the Nokia n79 this requires creating a new access point under TOOLS>SETTINGS>CONNECTIONS>DESTINATIONS. Add a new access point with the following settings:
Connection Name: Rogers VPN (or whatever you want to call it)
Data Bearer: Packet Data
Access Point Name: vpn.com
User Name: wapuser1
Prompt Password: No
Password: wapuser
Authenticaiton: Normal
Homepage: None
Use Access Point: After Confirmation (or change if you want something else)
That's it. When you load the internet radio Application and it lists your options select "Rogers VPN". If you don't see it in the list, press the soft button for Options then "Select Access Point" and you will see the full list. If you want the VPN to be the first thing you see you can change the priority under destination settings. Just select the VPN and press "Organize" then "Change priority".

Google Play Store error: "Connection Timed Out - Retry" Xperia E1

Hi
I have an Xperia E1 D2005, running kit-kat 4.4.2, 20.1.A.2.19 version, and few days ago I have encountered a strange issue, whenever I try to access Google Play Store app using 3G, it display a waiting sign until the connection timed out errors occurs. However if I use WIFI connection it will connect normally, and other Google services like youtube hangouts) worked fine.
I have trying severals methods to fix it:
- Check the date and time.
- Clear cache and data for Play Store Google Play Services Google Framework).
- Change or relogin Google acount.
- Uninstall Goggle Play Store update.
- Check my APN parametre (proxy/port, not set).
I tried even to repair my phone with sony PC companion, but the problem persists. I only half-solved the problem by using a VPN app (SuperVPN) that allows me to connect normally to the play store
So any ideas how to fix this problem?
Thank you

Check this out https://talk.sonymobile.com/t5/Xperia-L/Google-Play-Store-error-Connection-Timed-Out-Retry/td-p/967307

File sender communication channel stop working

Hi Guru,
I have a file sender communication channel. It usually works good. But sometimes it just stop working. And In RWB, it shows no error. If I stop it and restart it in RWB, it immediately works again. This happens once a while. Any ideas?
Thanks,
Meiying

Hi,
option 1--
Do some dummy changes and activate channel and try and perform cache refresh.
If still not working then stop and restart SFTP service,if still no luck then restart JAVA stack
option 2
try to put timeout value in the channel.
Regards.
Mastan

Getting error connection timed out while invoking webservice from bpel.

Hi,
I am trying to call a secure webservice developed in .Net having extension .svc from the bpel service and in response i am getting error
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect</summary>
I am able to call this web service from the java programme using HTTPClient by setting the username/password and soapaction in http Header but not from the BPEL process. This .Net service is synchronous in nature. I also set the proxy in opmn.xml but didn't got any success.
Please reply me ASAP. Need urgent help.
Thanks.

Are you working on 11g ? if this is 11g
How are you invoking the webservice ...does it have any authentication..
If the webservice which you are invoking has basic http authentication...
1. In the composite.xml file, right click on the reference and configure WS policies. In security tab, add a security policy named"oracle/wss_http_token_client_policy"
2. Add two binding properties for the reference
(i) oracle.webservices.auth.username
(ii) oracle.webservices.auth.password
and provide the username and password for those two properties...
Just try this out...
Thanks,
N

Flpclient error (connection timed out)

Hi
I am trying to access a webserver to download a file to my local machine. When I run the file, I am getting java.net.ConnectException...connection timed out. But if i use SSH SECURE SHELL client. I can log into the remote webserver and see the files. I wonder why my program is not getting connected. here is the code.
import java.io.*;
import sun.net.ftp.FtpClient;
import java.lang.*;
public class Download {
public static void main(String[] args) {
FtpClient fc;
String filename = "test1.txt";
String hostname = "www.mydevelopmentserver.com";
String username = "ftptest";
String password = "testing";
String directory = "/mydata/home/work";
try {
fc = new FtpClient(hostname);
fc.login(username, password);
fc.binary();
fc.cd(directory);
InputStream theFile = fc.get(filename);
int i = 0;
FileOutputStream fos = new FileOutputStream(filename);
System.out.println("getting file");
while ((i = theFile.read()) != -1) {
fos.write((byte) i);
fc.closeServer();
fos.close();
catch (IOException e) {
System.err.println(e);
I am not providing the port any where. Could that be the problem...How can i provide the port?? with the hostname??
Thanks

I have used sockets for connection . I don't understand how do you like connect but you can use socket for a good connection :
public class client
Socket server1;
InputStream inputnet;
OutputStream outnet;
String username;
String host;
public connect()
try
server1 = new Socket(host, 1111);
catch( IOException e)
return false;
Please send me your comments;
MIguel
}

JDBC Sender Communication channel stop working

Hi all,
I'm facing with a strange problem: I have a db to db scenario (SQL server to Oracle) that has been tested and that was working properly.
But when we started again our tests after some days, without doing any change, the flow didn't start anymore. The problem is in the sender jdbc communication channel:
creating it again with a NEW NAME, and changing the configuration the flow starts again. I try to explain the checks that I did:
- from the runtime workbench the adapter looks ok: green and making polling to the db (obviously without select any record even if we were sure that the select condition was satisfied by some records).
- I tried to simulate some changes re-activating the communication channel.
- clear cache
Nothing was working,the only solution was to re-create the cc with a new name (deleting the old one and creating a new one with the same name is not working as well). But we cannot consider this solution in a production system.
I have several scenarios like this and this problem happened three times in some months and every time with the jdbc sender from SQL server (never with the sender from Oracle).
There is someone that has any suggestion?
Thanks in advance,
Luciana Agostini

Hi Luciana,
There is nothing that you could do in PI that could help because most of the places where there could be a problem like cache or with adapter statuses you have already looked into . For the sake of a second opinion see what prateek srivastava has to say.
Basically a n/w connection problem or at the SQL db level.
Rgds
joel

Wget - Connection timed out when using "long" strings

I'm having a problem with a little script to change some settings for IP-phones. Here is the script:
#!/bin/bash
for i in "0" #"4"
do
for j in $(seq 176 176)
do
wget --timeout=1 --tries=1 --keep-session-cookies --save-cookies cookies.txt --post-file=postfile http://192.168.$i.$j/dologin.htm
wget --timeout=1 --tries=1 --load-cookies cookies.txt --post-file=postfile2 http://192.168.$i.$j/update.htm
done
done
postfile looks like this and is just for logging in:
P2=<pass>&
postfile2 looks like this:
P270=123456&
The problem now is, when using it like above, everything works fine. But if I make the text in postfile2 one character longer, I get this:
Connecting to 192.168.0.176:80... connected.
HTTP request sent, awaiting response... Read error (Connection timed out) in headers.
Giving up.
It doesn't matter where I put the character to make the string longer (I can for example use P32=1234567& and it works). I have tested the script from different machines and used different phones, always the same. Any ideas?

daf666 wrote:The two files look identical, are you sure that the "bad" one is actually a capture of the timed out session? (both have same data length and same value in the content-length header).
Yes, they are different and the bad is is from the timeout .
daf666 wrote:Anyway, this timeout might occur, if for some reason wget will say content length is 10 and send only 9 characters in the post request..
Any idea what I can do about it? There is something fishy going on. I did this once before a few month ago when I wanted to change other settings. I tried to do the same thing again but even this doesn't work anymore. Maybe I should just try curl .

'500 Connection timed out' Error in Sender SOAP Scenario

Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
<i>500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s</i>
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveen

Hey Praveen,
<i>I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.</i>
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING]

Sender Communication Channel Error

Hi all,
iam working on JDBC scenario.For this iam using party and business service.
iam getting following error at jdbc sender communication channel.
Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
Erlier it worked fine.But now iam getting this problem.
We are having some other channels which r working fine.
any ideas......?
Thanks,
Sreedhar Goud.

1. If you know the user, who having admin rights;
1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
2. Click on "New" button ( this is on Logon Dialog box)
3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
4. Say "Next"
5. Enter "User Name","Host" and "Port" and Save the data.
6. Select User and click on "Connect"
2. Did you forget the J2EE_ADMIN password? Just follow below steps:
Just follow below steps:
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2. "Switch to configuration mode" for that Click on "Pencil" icon;
3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
4. cluster_data --> server --> cfg --> services -->
click on "Propertysheet com.sap.security.core.ume.service
select properties:
ume.superadmin.activated = True
ume.superadmin.password = <enter password >
then say "OK"
Click on "Pencial ICON.
5. Save & restart Java Engine.
Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.

BIC Module Error in Sender Communication channel for EDI to File scenario.

Hi Experts,
We are working on the EDI based scenarion where EDI files come to SAP PI from partner and then through Split 997 Adapter Func Ack is sent back to the Partner . But we are facing a issue in our sender Communication Channel which is a File Adapter Channel and uses BIC Module for the conversion of EDI to XML .Request if any one can provide any guidance on the below issue coming in sender CC.
Error: Error in BICMODULE-module:Temporary error: BIC XI Adapter call failed. Reason: 2 errors occured. First error: EdiSegmentData read(): Edifact Format not correct : segment must end with \"segment delimiter\" (Segment : ISA). DESCRIPTION: EdiSegmentData Error: Your Edifact Format is incorrect the segment must end with \"segment delimiter\". check segment [not specified]. Last error: InhouseDocReader moveNext(): com.seeburger.jucon.dochandler.AnsiX12DocReader, offset[92(read Segment : ISA)]: could not parse segment (wrong format): EdiSegmentData: Edifact Format not correct : segment must end with "segment delimiter" (Segment : ISA) DESCRIPTION: InhouseDocReader Error: [not specified] at position [not specified] could not parse the segment [not specified] Error while reading description - wrong format.
Thanks & Regards,
Abhishek

Hi Abhishek,
Is there any special character present in the EDI file?
the parser is not able to parse the data.
you can check the BIC conversion log for more information.
Regards,
Harish

Error in sender communication channel

Hi,
I am doing File to RFC scenario in which i am using Standard bapi to get the cost from the sap system
while sending the data in sender communication channel the processing mode is in delete mode but it is not deleting and throwing the error
Error: com.sap.aii.af.service.util.transaction.api.TxManagerException: Unable to roll back transaction: com.sap.engine.services.ts.exceptions.BaseIllegalStateException
this error is from sender communciation channel..
can any one give some inputs for this...
regards,
Kishore

K.P.N.,
i have checked it getting the same error. in moni also administrative cache clear error is coming
do we need to do any workaround...
regards
Kishore

I am trying to update to iOS5, but after the download completes, I get an error message "There was a problem downloading the software for my iPad2. The network connection timed out." Any suggestions?

I am trying to update to iOS5 on my iPad 2, but after the download completes, and file processing starts, I get an error message "There was a problem downloading the software ... the network connection timed out." Diagnostic tests check out OK. Any suggestions?

Temporarily disable your firewall and security software and see if that helps.

Sender communication channel stopped after error "Connection Timed Out"

Similar Messages

Maybe you are looking for