Sender FCC error
Hi,
I get the below error in Communication channel monitoring and all the parameters have been checked and they seems to be OK. Channel was working properly earlier and nothing has been changed later.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'Line':java.lang.Exception: ERROR in configuration / structure 'Line.': More elements in file csv structure than field names specified!
Regards,
Chaitanya
You have more filed in the file in line no 2 then the no of field specied
For Example
Fieldname specified in Module config
Field1,Field2
But file may contain 3 three field in second line
23,A roy,67
so in this case it will fail.
check the second line in the file and count the no of fields.
Also check any field valuecontains the separotor (,) inside it? In some cases first name and last name we put by a comma separtor
Similar Messages
-
Hi,
I am facing an error in sender fcc its:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'Pricebook_Data':java.lang.Exception: ERROR in configuration / structure 'Pricebook_Data.': More elements in file csv structure than field names specified!
My source structure is :
Pricebook_abc (root1)
Pricebook_Data (root2)
field1
field2
and my sender fcc is:
Document name : Pricebook_abc
Document namespace: urn:xxxxxxx
Recordset name: pricebook
Recordset structure: Pricebook_Data,*
Recordsets per message: *
Pricebook_Data.fieldNames field1,field2
Pricebook_Data.fieldSeparator ,
Pricebook_Data.endSeparator 'nl'
ignoreRecordsetName true
I am unable to rectify the error. Please help me.
Thanks & Regards,
Pragathi.
Edited by: Pragathi on Jan 15, 2010 1:40 PM
Edited by: Pragathi on Jan 15, 2010 1:41 PM
Edited by: Pragathi on Jan 15, 2010 1:41 PMHi,
The error was saying that.. the no of fields you are getting in the source are diff from that you have mentioned in FCC.
Can you just copy and paste the source csv file? and the exact XML structure?
Regards,
Swetha. -
File Sender FCC doesn't allow repetitive segments and unbounded together
File Sender FCC give me error if I use the repeatitive structure and * (Unbounded) together. Here is the recordset structure UNH,1,BGM,1,DTM,1,NAD,1,CNI,1,STS,1,RFF,*,DTM,1 for which I am getting the error "Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR consistency check in recordset structure validation (line no. 12: missing structure(s) before type 'DTM' "
If I use the recordset structure UNH,1,BGM,1,DTM,1,NAD,1,CNI,1,STS,1,RFF,2,DTM,1 then I am able to parse the file. But My requirement is that I will expect variable no of RFF segments in my structure. If you guys could help me that would be great.Hi Mohammad
In this case try to maintain the following in content conversion parameters.
Key Field Name = Key
<xml>.fieldFixedLengths = 1,......................
<xml>.fieldNames = Key,.................
<xml>.keyFieldValue = 1
<xml>.keyFieldInStructure = ignore
<xml>.endSeparator = ,
Think this should solve your problem.
Refer the following SAP help link :-
[http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm]
-Thanks
Karthik -
Sending job error message to admin by email
Hi everyone...
Anyone knows how to send job error message to admin by email? For example, if crawler failed, an email is sent to admin with the error message. I'm thinking of building windows service which run at the background and knows when a job fail and send the error message through email to admin.
Is there a better way?
Cheers,
Jefi Santosohi,
>>>Can this be achieved through BPM?
yes you can put your transformation step
and send step in a block and specify an exception
branch and catch all exceptions that will
occur during transformations and the send step
then you can send info from the exception branch to
any other system
you won't be able to catch the error's name
but you will be able to notify any thinrd party
about the error
more on error catching:
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
Regards,
michal -
Frequently I have the aarp game site open and Yahoo open. At times Mozilla crashes and will not send an error message, simply brings up the restore screen. When asked to restore it never restores if Yahoo is up, Firefox just closes. At other times Yahoo may not be up but if I have two other sites up it may just dump my internet connection. Again, no opportunity to send error message. I really like a lot of the features with Firefox but the crashing is driving me crazy. A friend has had the same problem but is now just using internet explorer. I
Make sure that you haven't left a profiles.ini file.
* http://kb.mozillazine.org/profiles.ini_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
I have to send an error report every time I close a Mozilla window or shut down Mozilla. then I have to restart Mozilla to get back to the page I was on.
Do you have any Norton products installed?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes -
Itunes Won't Open Send an error report!
Hi I've just downloaded Itunes 6.0 and when I try to open it I get 'Itunes has encountered and error and needs to close send an error report?' I have read up on this and discovered that it may be a quicktime error so I went and downloaded quicktime seperatly with no luck. Then I read it may be C:\documents and settings\all users\application data\apple computer\itunes\sc info so I deleted it. No luck... does anyone else have any ideas? It stopped working when I downloaded the latest ipod update software for my ipod mini then it all stopped working I reallly need it to work for tommorow because I'm going on a long car journey and I want to be able to listen to my ipod. Thanks.
Regards Ruairidh McHardyHave you had a look at these troubleshooting pages? They may be of some help:
iTunes for Windows: Troubleshooting unexpected quits, freezes, or launch failures
iTunes for Windows in Windows XP or Windows 2000 doesn't open after upgrading -
Every time I try to open an attachment within an email it won't let me open it, it gives me the window with the choice of sending and error messg or do not send an error messg.
Also, when I click on the Firefox icon to get online it takes like a minute or so for the internet to come up. Both of these isssues have been going on for about a month.
Please advise me of what I should do to correct this, thanks so much. Edie WolfordWithout any details it's difficult to help; all I can do is point you to this possibility: https://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html
-
QuickTime 'Don't Send' report Error
Hey, lve just installed QuickTime and when im running it im receiving 'Don't Send'
report error, iv tried reinstalling it \ redownloading \ repairing. nothing works.
any suggestions?
thanksIs this happening when your trying to open a particular file type with QT? And you then get a microsoft message that a problem occurred and you can submit to microsoft or not send? Or is this happening while just trying to open QT player on it's own without attempting to open a file?
-
Send an error instead on malformed data
I am wondering if I am able to dequeue an incoming message and verify the data, before i insert it into a table, then send an error message back if the data is not valid.
Right now my B2B just sends an acknowledgment back, but doesn't insert the data as it is incorrect.
Should I try validating at the callout level, or the dequeue level?Hi Chris,
Please enable document validation. This can be done at the document definition section of Business action.
Regards,
Dheeraj -
How can i send an error message at EXIT_SAPMM06E_013 ?
Hi
I'm making some validations to Vendor and Partner Functions (table control in 'Partners' Strip) in Creting/Changing Purchase Orders (ME21N/ME22N).
I know the suitable user exit is EXIT_SAPMM06E_012 for making validation before saving, but this exit does not has (receive) the table with Partner Functions so i could validate them.
Then I use the Exit _013, wich executes when saving the PO, because this exit has the captured Partners table (XEKPA).
But, when i make the validations and try to send a error mesage, the system shows other message type info (window) like 'The requested object is locked by another transaction' and then another like 'System error (error in method PO_POST)'.
I think this it's because the exit _013 is better suitable to make customer updates and not validations, that it's because just passing by MESSAGE Ennn(cc) command makes the methods catch my error and send other errors and close the transaction.
Does somebody can help me ??
How can i send error messages in exit _013 ??
Or is this incorrect ??
Or in wich User Exit can i validate the Partner Functions ??
I really will aprettiate if somebody can help me, because i'm delayed with my development !!
RegardsHi Frank,
The eror message you are getting seems to be coming from somewgere else and may be due to the same PO being cahnged in another transaction or have you put some code in BADI ME_PROCESS_PO ( Method POST) .
You can try by commenting out the code in EXIT 13 .
If this does not work then use EXIT 12 only and below is the code you can use to access XEKPA in exit 12.
DATA IT_EKPA LIKE EKPA OCCURS 0 WITH HEADER LINE.
DATA NAME(50) VALUE '(SAPLMEPO)XEKPA[]'.
DATA NAME1(50) VALUE '(SAPMM06E)XEKPA[]'.
FIELD-SYMBOLS <F1> TYPE ANY .
IF SY-TCODE+4(1) = 'N'.
ASSIGN (NAME) TO <F1>.
ELSE.
ASSIGN (NAME1) TO <F1>.
ENDIF.
IT_EKPA[] = <F1>.
( Now you have the data in IT_EKPA table which you can use to validate )
Cheers -
Why my iphone send me error 1009 , i know i live in iran and ... But appstore doesn't send me error until today that i face with this error
The 1009 error is normally associated with a blocked country. There are a list of countries that Apple is not allowed to sell their software to due to US restrictions. Iran and Syria come to mind but I believe there are about a dozen.
-
I've been trying to authirize on iTunes my new MacBook Pro, but for some reasons always send me error 1008 saying that it has occured a internal error on iTunes please try again later, this issue had been happen since Sunday and not even people from Mac store could figure it out how to fix it. Does anybody here can help me? I only have one cmputer authorized under my acount so it shouldn't be a problem right?
Hi,
Just wondering if you ever found a solution to your problem? I have just bought an iMac and I am having the same problem, although my new iPad is fine and my old windows laptop and iPhone are also fine..... Running out of options to try and the Apple support guys have no idea....
Thanks!!! -
macbook froze while online. hard shutdown. when it restarted, an error message appeared saying finder shut down unexpectedly containing a message box with a long list of technical jibberish. after clicking OK that it would send an error report to Apple, the same error message box appeared again and again every time OK was clicked. Now the macbook will not turn on at all
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode. -
It used to send the error report all the time. Now not at all.
Welcome to Apple Support Communities.
With the announcement of the forthcoming OS X 10.8 'Mountain Lion', Apple is apparently no longer accepting crash reports from OS X 10.5.x "Leopard".
Maybe you are looking for
-
Oracle 10g Reports running slow
On one server we have an issue with some reports of 2pages taking 2 minutes or more to run, but on another server with the same data transferred across the same report runs in about 3-5 seconds. The reports we are having issues with contain graphs. T
-
What is the use of Standart text in SapScripts.
What is the use of Standart text in SapScripts? How to Use in Forms?
-
hi friends, i came across this code, and i am struck at understanding this code, usually loop keyword will be followed by itab, but here there is nothing, same with sort. SORT. LOOP. AT NEW MSEG-WERKS. some code ENDAT. AT NEW MSEG-M
-
Missing Artwork tab in Get Info?
Recently I've noticed more and more files that don't have the Artwork tab when you go into the info. I like keeping everything organized with DVD artwork, but I can't figure out why it's just some files and not others. If I select multiple files, I
-
hi JCO experts, I am connecting to a really slow back end system using Jco. Lets say a) JCO Client.execute takes 5 minutes. b) I want to run this execution in a seperate thread Is there a way I can kill the JCO connection itself after 2 minutes? (Ima