SENDER FILE ADAPTER (FTP) ERROR
Hi,
Iam getting the following error in sender file adapter:
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 *** ERROR *** NO BATCHES FOR TRANSMISSION
Could anyone help me in this.
Thanks &Regards,
Kiran
Hi Kiran,
This problem is not related to PI but rather related to FTP server settings.
Try changing the name of the file in your adapter settings to a string without any dots and ".
Try this and let me know if its successful.
Regards,
Divya
Similar Messages
-
Using wildcards (*) in sender file adapter - FTP type
Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
OlianThanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian -
Sender File Adapter (FTP Protocol)
Hi Every Body,
I have a problem in using Sender File Adapter of (FTP Protocol Type)
I have given all required settings to get connected to the FTP Server.
When i give ( Source Directory and Exact File Name ex : MDMERP.xml)
File gets picked up.
But When i give (Source Directory and Exact File Name ex : *.xml)
it gives below exception
Error occurred while connecting to the FTP server "mdmerp6:21": java.net.ConnectException: Connection refused: connect
Strange any guess !! :(((
Regards
SrinivasHi,
If that is connection error then it should have not allowed to pick up when i have given the specifif file name ,
.xml is too not working
my problem all starts if i use other than file name declarartion it throws error
of below kind
Error occurred while connecting to the FTP server "mdxxxp6:21": java.net.ConnectException: Connection refused: connect
Can i use " Advanced Selection of Source File" and make it run\
With regards
Srini -
Hi,
I have a Sender File Adapter using FTP which polls a server every 60 seconds looking for a file. Intermittently the adapter will connect and pick up the waiting file. However, more often than not it gives an error:
An error occurred while connecting to the FTP server 'xx.xx.xx.xxx:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 426 Unexpected reply codeConnection closed; transfer aborted.'. For details, contact your FTP server vendor.
The connect mode is Permanently and the transfer mode is Binary.
Any ideas ?
PaulC.Monica,
Can you explain the difference between ACTIVE and PASSIVE and why changing to ACTIVE may get rid of this issue ? Have looked at the help.sap.com and it doesn't give too much detail on these settings.
Thanks
PaulC. -
XI is picking up While File is being written in the Specified Directory. XI uses File adapter ( FTP transport Protocal ) . If file being written is very large ( It may take couple of minutes ) XI picks it up in parts for every 1 minute ( It was configured like that ) and try to send over Which is not correct. Is there any workaround to this issue. In PI 7.0, for NFS file system, SAP included modification check but it doesn't work for ftp file adpater. Basically XI should wait to pickup file until the file written completely in the Source System.
Anyone have any Idea how to overcome this issue ?Hi,
You could use the Advanced mode checkbox in the file adapter, to specify the time the adapter has to wait, before it checks if the file has been modified.
In case, the file has been modified, after the adapter read the file, the data in the adapter cache is discarded and the updated/modified file is taken from the source path specified.
This would work, only if you have not specified "recordsets per message" during content conversion.
Regards,
Smitha. -
Sender File Adapter - No error, but not generating any message
I am working on a file to RFC scenario. The sender file adapter is using content conversion to read a comma delimited file. The file is being picked up and archived correctly, and the adapter monitor does not show any errors. However, the process disappears at this point. I don't see any messages in SXMB_MONI, and there is no sign that the process is reaching the RFC adapter. Has anyone ever had this happen before?
I have four line types for Buildings, Additions, Floors, and Rooms.
I list all four in the recordset structure, and I identify a key for each with the keyFieldValue parameter. I list a fieldSeparator of ',' and an endSeparator of 'nl' for each row. And i have a list of the fieldnames in the fieldnames parameter.
The only thing i'm not sure about is the keyFieldinStructure parameter. I have specified ignore there, because I don't want that field in my XML. Do I still need that field in my sender datatype, even if I'm ignoring it, or can I leave it out?
Thanks for any help. Please don't just list blogs unless they have something you think is helpful with my specific problem. I have already read all of the blogs that deal generally with the sender file adapter and file content conversion, and I need more specific help at this point.I made one error before, it IS showing up in the Recovered Adapter Audit Log (it took that log about 10 minutes to open that particular tab so I didn't notice them there).
Here is what it says there:
2006-06-12 11:22:59 Success Channel CC_S_File_FIPM_Buildings: Entire file content converted to XML format
2006-06-12 11:22:59 Warning Channel CC_S_File_FIPM_Buildings: Empty document found. Proceed without sending message
2006-06-12 11:22:59 Success File "/interfaces/one line building.txt" archived after processing
Here are my parameters in the file content conversion:
Buildings.fieldNames RecordType,PLTXT,STORT,STREET,POST_CODE1,CITY1,REGION,PARNR,X_COORD,Y_COORD,ASSIGN_SQ_FT,BLDG_NUM,CAMPUS,GR_SQ_FT,NET_SQ_FT
Buildings.keyFieldValue 'B'
Buildings.fieldSeparator ','
Buildings.endSeparator 'nl'
Buildings.keyFieldInStructure ignore
Additions.fieldNames RecordType,ASSIGN_SQ_FT,BLDG_ABBR,CAMPUS,ADDITION,BLDG_USE,BLDG__NUMBER
Additions.keyFieldValue 'A'
Additions.fieldSeparator ','
Additions.endSeparator 'nl'
Additions.keyFieldInStructure ignore
Floors.fieldNames RecordType,BLDG_ABBR,CAMPUS,ADDITION,FLOOR,ASSIGNABLE_SQUARE_FOOT,BLDG_NUMBER
Floors.keyFieldValue 'F'
Floors.fieldSeparator ','
Floors.endSeparator 'nl'
Floors.keyFieldInStrucutre ignore
Rooms.fieldNames RecordType,SHTXT,MSGRP,ADDITION,ASSIGNED_DEPT,BLDG_ABBV,FLOOR_CAMPUS,AREA,RCD_CODE,DEPT_CODE,BUILDING_NUMBER,ROOM_COMMON_KEY
Rooms.keyFieldValue 'R'
Rooms.fieldSeparator ','
Rooms.endSeparator 'nl'
Rooms.keyFieldInStructure ignore
And here is my data type:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_FIPM_BuildingUpdate xmlns:ns0="urn:XXXXXX:FIPM:Buildings:SYS">
<Buildings>
<PLTXT/>
<STORT/>
<STREET/>
<POST_CODE1/>
<CITY1/>
<REGION/>
<PARNR/>
<X_COORD/>
<Y_COORD/>
<ASSIGN_SQ_FT/>
<BLDG_NUM/>
<CAMPUS/>
<GR_SQ_FT/>
<NET_SQ_FT/>
</Buildings>
<Additions>
<ASSIGN_SQ_FT/>
<BLDG_ABBR/>
<CAMPUS/>
<ADDITION/>
<BLDG_USE/>
<BLDG_NUMBER/>
</Additions>
<Floors>
<BLDG_ABBR/>
<CAMPUS/>
<ADDITION/>
<FLOOR/>
<ASSIGNABLE_SQUARE_FOOT/>
<BLDG_NUMBER/>
</Floors>
<Rooms>
<SHTXT/>
<MSGRP/>
<ADDITION/>
<ASSIGNED_DEPT/>
<BLDG_ABBV/>
<FLOOR/>
<CAMPUS/>
<AREA/>
<RCD_CODE/>
<DEPT_CODE/>
<BUILDING_NUMBER/>
<ROOM_COMMON_KEY/>
</Rooms>
</ns0:MT_FIPM_BuildingUpdate>
I'm going to recheck everything again, but maybe you guys will see something? I don't.
Vanda -
File Adapter FTPS: Error - iaik.security.ssl.SSLException
I'm trying to use FTPS to communicate from XI ( SP 15 ) . FTPS system Admin provided CA Certificate and we installed same in key Storage as trusted CAs.
However when I try to send file It was throwing message " Error: Message processing failed: iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: illegal parameter " In the Adapter Monitoring .
However same Certificates installed on recent versions of XI ( PI 7.0) works just fine.
Any ideas will be appreciated.Hi S T,
Check these..
Details for 'Is Web service security available?'
HTTPS Error
All the best!
cheers,
Prashanth
P.S Please mark helpful answers -
Sender file adapter conversion Error!!
Hello every one....
I am stuck with a problem...in my scenario,, there are possiblities that file may contain more than required paramters... in such case,,, paramters defined in conversion should go ahead and others should be ignored...
for this very purpose i added the paramter:
row.fieldSeparator ,
row.fieldNames orderno,authcode,status
row.endSeparator 'nl'
row.additionalLastFields ignore
the scenario works fine if the file contains thrree comma separated values but it raises an error if no of paramters increase as :
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting
document line no. 1 according to structure 'row':java.lang.Exception: ERROR in configuration: more
elements in file csv structure than field names specified!
we are using PI 7.... does it require some more configuration in additoin to paramter row.additionalLastFields
any help in this regard would be highly appreciated...
thanxthis parameter is already set, and this is the exact behavior i want from adapter engine... but the problem
here is different... the exception is raised at communication channel's conversion routine level,,, the retry
interval is not the one defined in visual admin but infact the interval (polling) time defined in communication
channel.... the system does'nt stop after 3 attempts,, but infact keep on trying to read it....
one peice of information i have found is in sap note:821267 , which states:
*Q35:*
Q: I have configured a File Sender channel with File Content
Conversion or a custom-developed module, which may throw an
exception. When the File Adapter encounters an invalid file, which
triggers a conversion error or an exception in a module, the
adapter will enter a retry interval and upon each following
processing attempt try to process the faulty file. This basically
prevents the File Adapter from picking up files that are located
after the fauilty file according to the configured sort order. How
can I change this behavior?
o A: This is by design. When the File Adapter encounters an invalid
file, manually remove this file from the configured source
directory. You can configure an alerting rule to get notified each
time this occurs.
We are currently evaluating possible solutions that could be used
to skip this manual interaction.
now can there be a way around to make communication channel read the file only 3 times (value defined in adapter engine profile in visual admin)
I have thaught of writing of module.... but the error is raised even before calling module !!
any further clue ??? -
File Adapter FTP Error : 501
Hi All,
I am getting following error in the communication channel for File Adapter.
'com.sap.aii.adapter.file.ftp.FTPEx: 501 IP Address for data destination doesn't match client's.'
Communication channel details are as follows -
FTP protocol is used with Port 21.
Data connection - Active
File type : Binary.
The same interface is working fine in Development, Quality and Pre-Prod environments.
This issue is coming only for Production FTP server.
From the error text, it appears as a network issue.
Please to let me know if anyone has came across such issue earlier, and what the the possible reasons - solutions to resolve this.
Thanks a lot.
Regards,
Minal>
Minal Vaidya wrote:
> Hi All,
>
> I am getting following error in the communication channel for File Adapter.
>
> 'com.sap.aii.adapter.file.ftp.FTPEx: 501 IP Address for data destination doesn't match client's.'
>
> Communication channel details are as follows -
> FTP protocol is used with Port 21.
> Data connection - Active
> File type : Binary.
>
> The same interface is working fine in Development, Quality and Pre-Prod environments.
> This issue is coming only for Production FTP server.
>
> From the error text, it appears as a network issue.
> Please to let me know if anyone has came across such issue earlier, and what the the possible reasons - solutions to resolve this.
>
> Thanks a lot.
>
> Regards,
> Minal
this seems to be something to do with your firewall... you can have your network team involved so that the can work a solution.
a good read: http://lists.opensuse.org/opensuse-security/1999-11/msg00099.html -
Sender File Adapter - FTP Connection Error 530
Need help!!!
I am getting the following error in XI when I try to connect to an ftp server.
"An error occured while connecting to server xxx.xx.x.xx:xx. The FTP server returned the following error message:'com.sap.aii.adapter.file.FTPEx: 530 Can't open passive connection---(4013)'. For details, contact FTP server vendor"
When I try the FTP connection on the OS level I am able to log in, but through XI I am unable to.
Has anyone seen this error before?I have seen Error Code 530 earlier, it is typically related to login related issues.
Check if the user mentioned in the Comm Channel has the correct password and read as well as write rights on the Server.
The most likely problem is with the User Credentials or Authorizations -
Receiver File Adapter: FTPS Error
On sending a text file to a trading partner the log in the communication channel shows the following:
Connecting to FTP server - success
Write to FTP server - success
Transfer: "TXT" mode - success
Exception caught by adapter framework:connection timed out - Error
The FTP connection Parameters have:
Data connection = Passive
Connection security = FTPS (FTP using SSL/TLS)
Command order AUTH TLS, USER, PASS, PBSZ, PROT
Use of X509 cert for Client Authentication is checked
Keystore = service_ssl
x.509 Cert and private key = *******.crt
When I look in the NWA logs for default trace I see several messages with the text "Rolling back transaction for message..." plus a FILE_ERR_211
What is a FILE_ERR_211?
Thanks
Markhi mark,
To configure a timeout for the FTP connection, please enable the "Advanced Mode" for the respective FTP communication channel in the Integration Directory and add an entry "ftp.timeout"=timeoutSecs
(without any quotation marks) to the "Additional Parameters" section, where timeoutSecs is the desired FTP timeout in seconds.
regards
kummari -
Failover solution for Sender File Adapter (FTP)
Hi guys,
I have a scenario FTP->Idoc. Is it possible within PI to create a functionality, that if a connection to one FTP fails, it will switch to another FTP?
Thank you,
PeterHi,
You may maintain two seperate Sender adapters with seperate FTP server and fix the polling interval to sequence the calling of file.
But if the file is available on both the FTP servers then there will be two calls always.
So you need to maintain the file in any one of the FTP server.
But this is just the manipulation, not the precise solution. You may go for BPM also
In communication channel there is no such feasibility. Probably you may need to go for customized adapter modules.
Thanks
swarup
Edited by: Swarup Sawant on Sep 2, 2008 11:42 AM -
System error when send file with Sender File Adapter
Hi all,
I have configured a "File To ABAP Proxy" scenario. After configuring, i executed a "Test Configuration" in Integration Directory and it's all OK. But this file unable to reach into ABAP Proxy Target. In the Runtime WorkBench\Message Monitoring, I get an error message in below:
Engine: Adapter Engine
Status: *System Error *
Start: 15.08.2008 14:04:01
End: 15.08.2008 14:19:01
Sender Service: BS_XI_SERVER
Interface Servic: urn://FILE_TO_PROXY
MI_EMPLOYEE_OB
In this case, I don't know why my Sender File Adapter is error and why status is "System Error" and why it can't reach into Target System. Can it concern a role user?
( For more clearly: I configured the source file and the path correctly. And i used the xml file with the content and the document name correctly. In general, the Sender Adapter File don't convert the sender file and its content is same as the Payload in the "Test Configuration", i think it is all OK.)
Could anyone please help me to resolve this problem, anyone can explain this error, how can i resolve this error?
Thanks a lot in advance,
Vinh VoHi Chirag,
1.I source structure is very simple as below:
<ns0:MT_MATERIAL xmlns:ns0="urn://FILE_TO_PROXY">
<MATERIAL>
<WERKS>1000</WERKS>
<MATNR>MAT00001</MATNR>
<MAKTX>Chemical Material</MAKTX>
</MATERIAL>
</ns0:MT_MATERIAL>
2. the Communication Channel Monitoring in Runtim WorkBench\Adapter Engine is OK for my Sender File Communication Channel, it's in Blue Light.
However, i don't know what's FCC?
Thanks and best regards,
Vinh Vo -
Zero size files in Sender File Adapter
Hello!
I have the problem with my Sender File Adapter (ftp).
Sometimes in ftp directory there are empty files or messages with a zero-sized payload.
This situation cause an error and Adapter "sleep" until I save-active it in a configuration. (before I removed the 0-size file...).
Any suggestion?
Thanks
AlessandroHi ,
What the note states is that if your Sender File adapter picks up and empty file, then it would not trigger any message at all.
So, if what that note says is correct, then I guess for the empty file, the adapter would not ve passed any message to the integration engine.
Is there any entry in SXMB_MONI? If yes, then it means some message is actaully being passed by the adapter engine to the integration engine which shouldnt have happened at all.
What does the error message in the File Adapter state?
Regards,
Bhavesh -
Sender file adapter - filename containing * does not work
Hi All,
I am doing simple file-file scenario wherein my filename is something like
MATMAS05_XI20070911-150159-088.xml
there are many files having similar kind of name which are supposed to be picked
so simply I can go on writing <b>MATMAS05_XI*.xml</b> in filename
it is not working.. communication monitoring gives error <i>Error occurred while connecting to the FTP server "10.25.117.237:21": java.lang.NullPointerException</i>
But when I use character '?' then it works fine - '?' placeholder for each extra character
I am on SP 20.My adapter is configured properly. FTP server working fine with '?' or simple filename. So bit confused why it is not working with *
Are there some BASIS settings which have to be in place to work it out with * ?
All your inputs are welcome !!
Thank You,
Mugdha kulkarniHi
this error is not related to multimple files or sending with the * char.. you can use it
see the below link
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
The error related to the server connection.. also check the ip address is correct or not you configured correctly or not..
also clarfity the correct error description ..
Chilla
Maybe you are looking for
-
Safari 6.0, what happened with option to open with windows from last session?
Made the upgrade from Snow Leopard to Mountain Lion and realized that I don't longer have the option to open Safari with windows from last session (Preferences->General). The option has been removed:
-
How do I create a vertical gradient in a table, not with an object?
How do I create a vertical gradient effect for alternating rows in a table? I'm trying to get my table cells to alternate and look like this: Thanks, freecondomap
-
Change default page to Dashboards
Hi, When i log in Presentation the first page that appears is Answers. How i change this to Dashboard? Thanks
-
New wish list for future Zen Mi
I would love to see that under "lock" condition, the player still allows you slide up and down to change the volume (but lock eveything else).
-
My Ipad has been stolen at home. I've purchase a new one and when trying to restore a backup from I cloud the Ipad showed me a different Apple ID than mine and refused my Apple ID. Can it be this ID (which is an email adress) is the email of the one