Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

Similar Messages

Lightning to VGA Adapter not working with certain apps

I've recently noticed that I can't watch movies on Netlix any more with my Lightning to VGA Adapter going to an LCD monitor. It works just fine with other apps just not Netflix. Apple says it is a Netflix app problem, and Netlix doesn't want to admit it's anything wrong with their app. Any one else have this problem? Is there a solution?

lightning to 30 pin adapter vga
First match (ignore the ad)

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

Fire FTP does not work with Firesfox 4. It worked OK with version 3. How can I get a New Fire FTP? Last version of FTP does not solve the problem

I need to know if it's 64-bit or 32-bit.
If it's 64-bit, try copying the mms.cfg file from C:\WINDOWS\syswow64\Macromed\Flash to C:\WINDOWS\system32\Macromed\Flash

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

Av adapter not working with ipad 2, please advice

I bought an av adapter 2012 release, is not working with my ipad 3g att ios version 4.3.5 i tried reset, changing the widescreen button multiple times no luck no video mirroring or sound. When i plug there is a msg displayed: accessory not supported.
I have 2 questions :
1) is this a ios version ? There a lot people complaining that after updates the adapter stopped working, if it is is this version w abug?
2) can i update the ios to 5.x not the ios 6 or i m forced to update to the last version ?

See the following where it states the requirement of iOS 5.1 or later (in the features box)
http://support.apple.com/kb/HT4108?viewlocale=en_US
And yes, you should be able to update to iOS 5.1 without going directly to iOS 6. You need to locate the correct .ipsw update file for your iPad 2 and manually install it through iTunes. Google "ios ipsw 5.1.1" for links to the iOS 5.1.1 files.

Sharepoint send to button not working with document mode 9

Hi All,
We are using document mode 9 for HTML 5 in the master page but the SharePoint send to button is not working with ie 9.
Can anyone help me to resolve this issue.

SharePoint 2010 doesn't use HTML 5, so its possible that the browser is running in quirks mode. Try the default compatibility mode and see if that works for you.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Shift keys on thinkpad twist not working with certain keys

My shift keys stopped working with certain keys. asdfjkl;'zxcvm,. Those are the letters and symbols that my shift key stopped working with. Any help is greatly appreciated.

Okay, do the following.
1) Go into your control panel. You can get into this by either pressing Windows key + E, or search for control panel in the 'Search' box.
2) Now select View By, and choose 'Large Icon' or 'Small Icon', which is on the top right corner of the Control Panel screen.
3) Select 'Ease of Access Center'. Or you can skip step 1 and 2, by directly typing 'Ease of Access Center' in the search.
4) Select 'Make the Keyboard easier to use'.
5) Make sure you unselect 'Turn on Filter Keys' option.
3)
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Mini dvi to dvi adapter not working with monitor

arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
Message was edited by: Veiss

The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

SAP PI FTP sender adapter not working with SAP ECC over Itanium

Hi,
We have been running normally SAP PI 7.0 SP14 with no issue for a while.
We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
Does anyone have any idea?
Thanks a lot for your help
Diana

Hi,
I am using FTP connection and for the receiver it is working fine.
Thanks
Diana

Archive file with errors in sender file adapter not working! please help!

Hi Experts,
I have a file to RFC scenario. the input is a XML file. I have setup the flag in sender file adapter channel for archiving the input files with errors. But it is not working.
For testing I have used an invalid xML file for example without the main XML tag. I have also tested with a MSWORD file saved with.xml extension. But in both the cases the files are not getting archived.
My archive location permissions are fine and in fact normal archive operation is happening. That is, if I select the processing mode as "Archive" and gave the Archive directory then files are getting archived. The problem is only with the "Archive faulty source files" option.
What am I missing? DO I need to do some more configurations?
What are the prerequisites if any for this option?
How to test this?
Please help me! I will be greatfull to you all!
Thanks & Regards
Gopal

and go thru this links
Creating a Single Archive of the Version Files
http://help.sap.com/saphelp_nw04/helpdata/en/79/1e7aecc315004fb4966d1548447675/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/31/8aed3ea86d3d67e10000000a114084/frameset.htm
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Thunderbolt to VGA Adapter not working with SMART board all of a sudden?

I was wondering if anyone had any suggestions on getting my classroom's (I'm student teaching) SMART board connected to my macbook pro (13 in). Two days ago I tested the setup I had, Mini-DVI to VGA adapter, Mac OS X SMART software suite and it worked flawlessly. Today I try the setup and although the SMART board recognizes my macbook via usb, the projector does not display anything. System preferences does not even recognize the projector as an external monitor. When I plug in my Mini-DVI to VGA adapter (already attached to the VGA cord from the SB) the screen flashes black and goes back to normal. Official work from SMART technologies is there is no supported adapters for connecting a macbook to a SB but I have seen numerous threads about this setup working and like I said it was previously working fine. Any suggestions on what to try next? I was thinking of dual booting to an older version of OS X. Thanks.
Specs:
MacBook Pro 13 in
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
10.9.1

If your laptop is not connected to power (i.e., plugged in to a wall), try plugging it in. It is not uncommon for a laptop to send the VGA signal out with less power when it is on battery power. I've seen this fix this problem, at least, dozens of times.
Try connecting the VGA cable to your adapter while the smart board display is on THEN plug the adapter in to your computer.
Also, try connecting the VGA+Adapter to your mac before booting it (or connect the macbook to the vga cable and then reboot the macbook). I've seen this work with macbooks using vga on projectors (or other external displays running through longer cables or crestron/extron/whatever switching equipment) many many times too.
If these fail, get your campus AV (or IT) people involved. We have often found that a damaged cable or long run needing amplification will work with some computers but not with others. It could be that the cable running from the smart board is somewhat sketchy.
Also, have you attempted to connect your macbook to any other display since starting to have the issue? A bad dongle (dp to vga adapter) isn't rare. I have a bad one sitting on my desk at this very moment.
One last thing you can try, this works for some:
Shut of the mac
Connect it to the smart board (i.e, connect the cables)
Turn on the mac and then close the lid
This *may* boot the computer on the external dispaly (smart board)
Open the lid before it comes to the login screen.
Hopefully one of these suggestions helps.

ShowDocument not working with Host name in IE

I have the following applet code:
try
     URL NodeURL = selectedNode.getNodeURL();
     if (NodeURL != null)
String pageName = selectedNode.getNodeURLTarget();
getAppletContext().showDocument(NodeURL,pageName);
     } catch (Exception e)
System.out.println("6.mousePressed Execept = ");
          e.printStackTrace(); // fps '04 uncommented
Html page.
<html>
<head>
<title>Module Home Page</title>
</head>
<frameset cols="33%,*">
<frame src="http://11.2.2.125/java/WebViewTree.html" name="treedisplay" marginwidth=0 marginheight=0>
<frame src="GenInfo.html" name="pagedisplay" marginwidth=5 marginheight=5>
</frameset>
</html>
When I bring up my webpage via IP(http://11.2.2.125) everything is ok. If I use the host name (http://davehost) the page does not get displayed in the frame named 'pagedisplay'.
Now this only happes with IE (6.0 sp2) it works with Netscape.
I notice the following:
If I change the code to use getAppletContext().showDocument(NodeURL,'_blank'); it actually pops up a new window and works ok.
I noticed that the browser never sends the 'GET' when executing the showDocument.
Any one notice this or notice someting I am doing wrong.
Thanks,
Frank

Hard coding the ip is not a good practice more over try using the relative path
such a ..\ for directory..
and i believe that the ip need not be specified when you are deploying it on web server.

KeyFieldValue in Sender File Adapter Not Working

Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
Sreedhar

If you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module

Sender FTP Adapter not working with certain name

Similar Messages

Maybe you are looking for