Sender FTP server : CWD Error

Hello Guys,
I have FTP to FTP scenario where it seems like the source FTP server doesn't supports CWD command.
Our client has provided with a log which contains "NoFolder" ERR:CWD\home\aufes\UFA\purchase\
Which means that the source folder is not found because FTP adapter's CWD command is not support on that server.
Do we have any other possibility to access such kind of servers which doesn't support CWD?

Deleted my reply i just realized it is sender adapter..
Message was edited by: Hareesh Gampa

Similar Messages

Trigger alert for file not existing in sender FTP server

Hi all,
I have a scenario file to file.In the sender FTP server a file is placed every 3hours.If file is present it will work in the normal file to file procedure.But when no file exists it should trigger an alert.
Scripts on FTP server is not accepted as a solution.
Can anyone let me know how this requirement can be achieved.
Points will be awarded generously.
regards,
padma

Hi
But when no file exists it should trigger an alert.
EMAIL can be used : assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered.
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
Also, to test your Alerts, execute the report RSALERTTEST in SE38.
Also go throuh the following links...
The specified item was not found.
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
Configuring scenario specific E-mail alerts in XI-CCMS: Part u2013 1
Configuring scenario specific E-mail alerts in XI-CCMS: Part - 1
Regard's
Chetan Ahuja

Send via server communication error

Until today I could wirelessly transfer my pictures from my SX280 HS to my computer from a remote location useing "Send via Server". Today after the first file upload progress bar completes, I get "Communication Error" "Error Detected". Is something wrong with the server? I am able to upload to the Canon Image Gateway, but that option offers no automatic transfer to my computer. I have reinstalled Camer Window and have tried again with my computer turned both off and on. I also reset the wireless settings on the camera. None of this works. All the other wireless functions on the camera work fine.
Perhaps its a firewall issue, but disabling the Norton firewall doesn't help either. Does anyone have any suggestions for making this work?
Thanks,
Bob
Solved!
Go to Solution.

I was able to solve this problem roughly as follows:
I logged into my Canon iMage Gateway account and deleted all existing web services listed there
-- Click on the link for your camera
-- Click on "Web Service Settings"
-- Click on "Delete camera link settings".
I then connected the camera to my desktop where Camera Window is installed. Wifi or USB both work.
I reestablished the "Web Service Setting" through Camera Window.
I am not at that machine right now and cannot walk anyone through the exact steps for this part of the process
That's it. I disconnected the camera from the computer and attempted the "Send via Server" option on the camera. It worked the first time. Photos uploaded into the ether and magically appeared in the designated folder on my home computer.
Bob

Error with Archiving Faulty Source File in Sender FTP adapter

Hi All,
I have configured a Sender FTP adapter with Processing Mode as Archive.
I am able to read the files from FTP server and archive all the successfuly processed file in the PI aplication server directory XXX/success.
We need all the error files also to be archived on PI application server in directory XXXXX/Fail so I have checked the option Archive faulty Source Files and provided the application directory XXXXX/Fail .
I have unchecked the option Archive Files on FTP server.
But the problem is when FTP adapter is getting any error files it is not able to archive it to application directory XXXXX/Fail .
In RWB it is showing the error
Unable to archive faulty input file /data/abc.txt to /XXXX/fail/abc.txt
Cause: com.sap.aii.adapter.file.ftp.FTPEx: 550 rename: No such file or directory
This directory is existing and works fine when I give this directory name in Archive directory of processing mode.
Sender FTP adapter is trying to archive the file in FTP server which I dont want and giving us this error.
If I give any Directory which is present in FTP server my error files are getting archived on FTP server but not in the archived folder.
I have already unchecked the option Archive Files on FTP server.
Please help......
I am on PI 7.11
Regards
Henery H

Hi Henery,
Check the below thread, this should help you to fix the issue.
FTP adapter: exc. 550 : No such file or directory
Thanks,

FTP Server in SAP XI

Hi Friends,
1. i have a question in XI. i want intergrate Mainframe systems and Siebel system through XI by using File to File Scenario.
here XI will pick the file from Sender FTP server with File adapter, processing the file and send to Receiver FTP server with File adapter.
Here my doubt is, FTP servers are different systems or both are same? And these servers are not part of the XI server right?
here i am confusing so much, i am thinking both sender & receiver maintaining their own FTP servers.
2. what is soap end point.
3. how many elements are there in a sender data type for JDBC to File Scenario.
please respond regarding the above quickly.
i am very thankful to you all in advance.
Regards,
Nagarjuna.

Hi,
1. i have a question in XI. i want intergrate Mainframe systems and Siebel system through XI by using File to File Scenario.
here XI will pick the file from Sender FTP server with File adapter, processing the file and send to Receiver FTP server with File adapter.
Here my doubt is, FTP servers are different systems or both are same? And these servers are not part of the XI server right?
here i am confusing so much, i am thinking both sender & receiver maintaining their own FTP servers.
FTP protocol is generally used for communication with external servers, it is not part of XI, it is operating sytem level protocol. We need to active FTP server at operating system level
2. what is soap end point.
For SOAP interface we need to create web service, it is part of XI, through WSDL we can create web service
3. how many elements are there in a sender data type for JDBC to File Scenario.
If sender is JDBC we need to create SQL query in XML format, after that message type, interface type and Mesage Mapping & interface mapping need to configure. Meanwhile receiver structure*
please respond regarding the above quickly.
i am very thankful to you all in advance.

FTP Server encoding issues

I have an encoding issues with FTP Server of OS X ML
1. When users connected from NT machine (Windows 2008 R2, Windows 7 etc) to OS X ftp server
user cannot see cyrilic names, it looks like - РђР»РµРєСЃР°РЅРґСЂ РђРјРµР»РёРЅ
2. When user trying to create file or folder with cyrilic name system return an error "While creating Новая папка on FTP server occured error..." in meantime on Server can observe that file actualy creater BUT with strange name - %CD%EE%E2%E0%EF%E0%EF%EA%E0
Is there way set charset encoding for OS X FTP Server? or any other way to fix this from Server side?

auto complete is bash or whatever shell you are running.
ls is not bash. Different programs treating data differently.
So Vim and nano could be doing the same wrong thing ls is doing.
Each individual program is its own world and gets to mess up that world the way it wants

Error connecting to ftp server

Dear All,
I'm doing file to file scenario through XI. The receiver communication channel is a normal file adapter and it is working perfectly fine . My sender communication channel is a FTP adapter. I'm trying to send a file from FTP to a folder on my integration engine. When i went into adapter monitoring, i got the error in the sender file adaper for ftp. The error is - " Error connecting to ftp server ".
normally, i'm able to do the ftp from integration server to my ftp server, but through XI , it is giving me the above mentioned error. I think some of my properties are not specified correctly. Kindly advise . The properties that i have specified in the ftp adapter are -
adapter type - file
transport protocol - ftp
message protocol - file
adapter engine - integration server
server - ip address of the ftp host
port - 21
username - username of the ftp server
password - password of the ftp user
connect mode - per file transfer
transfer mode - binary
folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
file name - file in the above specified folder
Kindly let me know.
Regards.
Naveen

HI Naveen,
This link explains all the parameters that need to be entered for a file adpater. Just check it out and compare it with your values and your FTP settings.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
//folder - name of the folder created on the ftp root directory ( without the path ) Do i need to give the full path here ?
Yes, i think you should specify the full path here.
Regards,
bhavesh

Unable to send file in binary mode to ftp server using AIR application

Hi, Can any one help me. i am trying to send local files to ftp server in binary mode from AIR application using sockets.
I cant use PASV mode for this FTP server because security restrictions. when i am trying to send Binary command i am always getting
error code 500 which is unrecognized command. I googled for solutions but i cant find any one using Binary mode to send data every example is using PASV mode to send
file.
code example:
private function upload():void{
sendCommand("binary ");
private function sendCommand(arg:String):void {
                                        arg +="\n";
                                        s.writeUTFBytes(arg);
                                        s.flush();
in response i am getting unrecognized command.

I'm successfully using an ftp example from http://http://projects.maliboo.pl/FlexFTP/
that I converted to spark and uses a popup progress window.
If you don't need to use sockets I can post a sample project.
I believe I still connect with PASV, but have no problems sending Binary files.
I don't think they're commands that are dependent on each other

Sender FTP error

hi,
I use SAP PI 7.0 SP18
i have configured a senderFile Adapter with FTP. when i run the scenario i get the below error:
An error occurred while connecting to the FTP server 'xx.x.xx.xxx:990'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: The control connection to the FTP server xx.x.xx.xxx timed out while reading the server reply.'. For details, contact your FTP server vendor.
i can ping the FTP server from PI server, the port is also open. FTP server is running.
further when i searched on SDN i found the below link:
FTP - file content conversion error
i have also referred SAP help for FILE/FTP adapter (sender) configuration.
futhermore i have maintained the following parameters as given below::
connection security - 'None'
transfer mode - 'Text'
any other pointers to solve my issue? please do suggest if i am missing something.
regards
ridhima

With your Basis Team, check if you can connect in FTP from your system to FTP Server destination.
FTP <desthostname>
However, port 990 seem an FTPS port, You connection need to be an FTPS connection? If yes, this could be a Certificate issue.

Unable to send file to FTP server

Hi All,
I am using a File to File scenario. In that i am using FTP. The file is not reaching the target side. It is displaying the following error. I have checked the Target directory, it is correct.I am able to send manually FTP File to the same target directory.
Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: An error occurred while connecting to the FTP server 'acmxrtdb:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 C:\BankFiles\FromSAP\Wells: The filename, directory name, or volume label syntax is incorrect. '. For details, contact your FTP server vendor..
Please help me in solving this. It would be very helpful to me.
Thanks & Regards,,
Raju.D

Hi,
the path specified is not correct.
The value "0 C:\BankFiles\FromSAP\Wells" is not valid if the protocol is FTP. This is the physical directory on the operating system.
If you're using an FTP server you need to know the path to the file on the FTP.
To do this I suggest to connect to the FTP using Internet Explorer and navigating the FTP folders until reaching the right one.
Then on the url bar you should got something like this: "ftp://server:21/path/to/file/". Use "/path/to/file" as value for the file adapter configuration.
Hope this help
Francesco

Connection refused Error while writing file to FTP server.

Hi All,
We got below error while writing file to FTP server. Any one have any idea on this?
sABCS_1.0_8e88588d4fb54ebd2ac7ef66c8421d52.tmp/writeEncryptedFile.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server. [Caused by: Connection refused]
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.

Hmmm ...
Same issue as your post from three months' earlier?
Re: Error while putting file in sftp location.

FTP Adapter File Polling does not raise error when FTP server is down

Hi All,
Thanks in advance.
I am polling for new files in a FTP Server. However, if the server is down there is no way for me to catch the fault to notify someone. I am using fault-policies but that never gets triggered when polling an unavailable FTP Server.
One option is to have a completely separate scheduled process (SOA or not) that tries to connect to the servers but I am trying not to go that route just to keep things manageable and within the realm of the process.
I am sure that I am not the only one polling for new files in a FTP Server, so I thought to pick your brain to tackle this scenario.
Thanks for taking the time to read this.

I was contacted by our DBA team for an exception received while writing a file to a FTP location.
Then i looked at the exception message and asked them to check the whether they are able to contact the ftp server using command prompt then they said the user password got expired.
They reset the password and its working now.
Am i missing something here :(
Exception:
WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
Thanks,
Vijay
Edited by: veejai24 on 25-Jul-2012 07:10

Trigger aler or send a mail if target ftp server is down

Hi,
I am sending file from source to target using XI.
Here my target is FTP. If the FTP server is down on the target side while placing the file we need to trigger an alert or send an email to the sender.
Thanks & Regards
Sowmya.

Once the adapter engine tries for the standard retry time and interval, it will change the message status to System Error.
Create Alert Rule for the Adapter Engine errorrs. SelectAdapter Engine and make the adapter type as All. Rest is same
The specified item was not found.
Regards,
Prateek

Error occurred while connecting to the FTP server: java.lang.NullPointerExc

Hello Experts,
I have a scenario wherein i have to send file from FTP to application server of ECC.
I don't want to do any mapping and transformation; Just need to transfer the file as it is.
I have achieved this using Integrated scenario.
But in the sender communication channel i get an error saying "Error occurred while connecting to the FTP server "*.*.*.*:*": java.lang.NullPointerException"
I have checked all my FTP parameters many times and everything is correct.
Thanks,
Lalit Mohan Gupta.

Hi,
You can check the connect test of FTP in either of the below ways.
1. Use FTP Dos command (i.e go the run and type ftp..) and from there try to login to the source FTP server by using FTP Commands. If you are able to connect to the same then ask your basis to check the connectivity test from PI server.
If you are not able to connect check the error you are getting and post the same if you are not able to resolve the same.
2. There is Program from SAP which need to be deployed into Server and after that you can test the ftp connection by yourselves from PI server. Search in sap support for Connection Test SAP Note..
HTH
Rajesh

FTP server was down when XI was sending messages

Hi guys,
I have the following problem:
Yesterday the FTP server of a legacy system was down while some interfaces were running in XI and were producing some files that should be written in target ftp server. In communication channel monitoring I get the following error:
"Error occurred while connecting to the FTP server "120.2.6.133:21": java.net.ConnectException: Connection timed out: connect"
Is there a way to retrieve these messages somehow without having to run the intrfaces again from source system??
Evaggelos

Just goto...Runtime workbench..
Select the message monitoring there...
then provide the filters like sender business system and receiver business system...then select the start/end date...may be last 7 days/yesterday...
Then select the status as " ALL CONTAINING ERRORS"...you will see all you messages there select and click on resend...You can even reprocess all the messages at the sam time...Just click on "multiple selection" ON and say select all..
Thats it..
Regards,
Ravi

Sender FTP server : CWD Error

Similar Messages

Maybe you are looking for