Sender IDOC adapter for SAP 3.1H system & XI 7.0
We are on XI 7.0 and XI would receive a IDOC message from SAP 3.1H system.
I need to import IDOC's in imported objects in integration repository but I cannot see any IDOC under the IDOC node. I am able to see the RFC's. Do we need to do extra steps with SAP 3.1H version for IDOC adapter?
Thanks in advance for help!
Mrudula
Ahmad,
This thread is for sender RFC adapter. I am able to see the all the RFC's but not IDOC's from Integration repository for imported objects from SAP 3.1H version.
Thanks!
Mrudula
Similar Messages
-
Steps required for Sender IDOC adapter PI 7.0
Hi all,
My basis guy has installed SAP EHP1 for PI7.0 for handling the idoc packaging(sending idocs in packs)...
Please can any one let me know the further settings required in PI after it has been installed...
and even when i open the sender IDOC in comminication channel in ID i am able to see only 3 options
Transport prtocol, message protocol,Adapter engine...
But i am not able to see the other fields...
Can any one help me...
Thanks and Regards,
sridharHi Michael,
Thanks for your reply..
I searched for the docs in many ways.. but couldnt find proper information regarding the IDOC packaging with sender IDOC adapter and steps required...
Could you please let me know if i can get the book in Singapore since our project, because almost 90% interfaces are related to IDOC...
And request you if you can share me the steps required in PI to confirgure IDOC packaging for EHP1...
Regards,
Sridhar Reddy
Edited by: sridhar reddy kondam on Jun 15, 2009 4:35 AM -
Sending IDoc Batches to SAP: Issue with Header Mapping for SNDPRN
We are sending batched IDocs from XI to SAP. We need the individual IDocs to reflect different SNDPRN values. Our mapping creates the different IDoc EDI_DC40 record correctly with different SNDPRN values. However, XI wipes out the SNDPRN values in the payload. When we define Header mapping to get the Sender Party as the XPath to the SNDPRN in the payload, then the header mapping errors out because the XPath returns multiple values.
I wanted to know if anyone has successfully implemented sending IDoc batches to SAP from XI with different SNDPRN values.
Your feedback is appreciated.
Jay Malla
Licensed To Code
Genentech SAP XI TeamHello,
I have the same problem. I want XI send an IDOC with the SNDPOR, SNDPRT and the SNDPRN that are in the EDIDC40.
<u><b>I find this in sap.help : </b></u>
<i>Mapping
The IDoc adapter does not make any special demands on mapping. The IDoc adapter must simply be provided with an IDoc XML structure at the Integration Server outbound channel. This either already exists or must be generated by using a mapping.
If the IDoc XML structure contains a control record, it is deleted and created again by the IDoc adapter. If you want to include additional values in the control record, you must select the Apply Control Record Values from Payload checkbox in the parameters in the communication channel and provide a corresponding mapping for the values.
You can include the values from the following fields in your IDoc control record:
MESCOD, MESFCT
TEST
EXPRESS
STD, STDVRS, STDMES
SNDSAD, SNDLAD
RCVSAD, RCVLAD
REFINT, REFGRP, REFMES</i>
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/frameset.htm
Perhaps we must use party configuration but I don't know how do this !
Regards,
Chris<u></u> -
Send idoc to external sap system
hi all,
is it possible to send IDoc to a sap system which is not in the same network with XI? If yes, is there any special points that should be taken care?
Regards,
HuiHI Hui
It is possible. But it is IDOC to IDOC Scenario.
Check these below SAP contribution docs on Idoc-Idoc scenario:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Cheers..
Vasu
<i>** Reward points if found useful **</i> -
Why do we require Receiver IDoc Adapter wen Sender IDoc Adapter is not req?
Hi All,
We require Receiver IDoc Adapter( if the receiving System is R/3 and uses IDoc) but when sending BS uses IDoc, Sender IDoc Adapter is not required since it resides in ABAP Stack. So, can anyone explain me as why do we need to configure Receiver IDoc adapter?Hi,
Both the sender and receiver IDoc transmission is done by the RFC communication channel.
In case of the sender IDoc, partner profile configuration in the sender system will tell for a particular IDoc type which port should be used. This port will have the details of the RFC channel to be used to deliver the IDoc.
However, in case of SAP XI/PI system we don't configure partner profile and hence we need a way to tell which port & RFC destination should be used to deliver the IDoc and hence we define a receiver aggrement and adapter. This is just used as a reference at rutime and unlike the other adapter, this receiver IDoc adapter doe's not process any message over Adapter engine.
Hope this helps...!!!!
~SaNv... -
Assignment IDX1 port to sender idoc adapter ...
Hi gurus,
I have a big problem and I don't have any idea how to solve it. Please, help me.
I have a non-SAP system, regular SAP ERP and SAP XI and I need to transfer IDocs between them.
There is no problem to send IDoc from ERP to XI and forward it to non-SAP system. Unfortunatelly communication in opposite direction doesn't work. XI is not able to receive IDoc sent from non-SAP system because appropriate metadata can not be found in IDX2 cache.
In configuration of communication channel for sending IDocs to non-SAP (receiver idoc adapter) I selected IDX1 port that is directed to the ERP and it's worknig fine. I can send IDoc from XI to non-SAP.
But in configuration of communication channel for receiving IDocs from non-SAP (sender idoc adapter) is not possibility to determine any port. Does exist a way how to force sender idoc adapter to use some specific IDX1 port?
Thank you in advance for every reply!
Regards,
ZbynekThe IDocs are sent from non-SAP system by means of tRFC. Connection type of the RFC destination is type T (TCP/IP) and activation type is Registered Server Program.
If we sent the IDoc directly into SAP ERP (where the IDoc Type is known) everything is fine
Edited by: Zbynek Kabrt on May 19, 2009 8:59 PM -
How to configure Sender IDOC adapter
Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashishhi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin -
Why no sender idoc adapter .
hi,
while configuring idoc to file ......... why we are not using sender communication channel or configuring sender idoc adapter ..............
thanks in advance,
jp.The main use of a sender adapter is to convert the input format into an XI supported XML format. Once this is done, the sender agreement appends the header with the sender details. In the case of IDoc adapter, you would not require a sender agrrement or a sender channel for the following reasons
1. The adapter resides on ABAP stack hence the integration server takes care of the IDoc to XML conversion without requirement for adapter.
2. The business system that is sending the adapter has already been assigned to a technical system which normally acts as an Integration server.
3. In the system, you fill in the adapter specific identifiers where you define under the IDoc adapter, the Logical system name and the R/3 client and the number. -
Configuring iWay Siebel Sender/Receiver adapter in SAP XI.
Hi,
I am evaluating iWay Siebel Adapter for connection between Siebel system and SAP system. I am using both the sender and receiver iWay adapter for both inbound and outbound scenario.
In both the case the transport protocol used is HTTP. I searched a lot but could not find a document which explains the different parameter in the Communication channel for both sender and receiver adapter.
Please let me know if you have some document regarding the same. Also in my present scenario I don't have access to Siebel system so I am using a HTTP client to simulate a Siebel system.
I want to know what should I use in the Listener port in the Sender CC and how to send message using this port from a Local HTTP Client.
Regards,
NileshHi Nilesh,
Check this link on the service marketplace for more information on available 3rd Party Adapters for XI:
https://websmp104.sap-ag.de/~sapidb/011000358700008673832004E/index.htm
http://eai.ittoolbox.com/groups/vendor-selection/eai-select/adapters-to-integrate-sap-xi-and-siebel-639308#
Please see the below threads
iWAY
IWAY Adapter(siebel): Error while using Applicaiton Explorer
XI to mainframe adapter
B2B Adapters
step by step procedure to configure a BAAN adapter
In this thread I have given the connection parameters to connect Siebel using HTTP reciever adapter...
Query String
Siebel - http://www-128.ibm.com/developerworks/rational/library/05/419_siebel/index.html
/people/siva.maranani/blog/2005/09/15/push-data-to-mvc-architectured-application-using-xi
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
See the below links
Integration with Peoplesoft, Oracle and Siebel
/thread/93179 [original link is broken]
XI integration with PSFT/Seibel ?
SAP Siebel Integration
Sap-Siebel integration
XI-Seibel integration using webservices
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
part -II /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
part -III /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
/thread/96443 [original link is broken]
inetgartion of Ep-XI-seibel project
/people/sriram.vasudevan3/blog/2005/03/18/points-to-ponder-over-while-considering-webservices-implementations-vis-a-vis-eai
Regards,
Vinod. -
What is Ale, Edi,IDoc tech for sap
Hi all,
What is Ale, Edi,IDoc tech for sap?
Thanks.hi deniz,
<b>ALE</b>
ALE
Triggering OB via Change Pointers:
When an application make a changes in any object an entry is made in CDHDR and CDPOS tables. When any change is made the SMD(Shared Master Data) Tool checks that ALE setting and create a change pointer in the BDCP table that will point to CDHDR table. A standard program RBDMIDOC is scheduled to run on a periodic basis to evaluate the change pointers for a message type and start the ALE process to distribute to the appropriate destinations. The program will read the table TBDME to determine the IDoc selection program it is MASTERIDOC_CREATE_SMD_MATMAS in the case of MATMAS.
Outbound Process:
When the stand-alone program or the Transaction(BD10) is run, it calls the Idoc
Selection program MASTERIDOC_CREATE_REQ_MATCOR in the case of MATMAS, which is hard coded in the program. The Idoc Selection program reads the master data and create a master Idoc and stores it in the memory. The function module then calls ALE layer by using another function module MASTER_IDOC_DISTRIBUTE which is invoked inside it. Then Idoc filtering, Segment filtering etc.. are done in the ALE layer.
To dispatch the Idoc to the destination system, the system reads the partner profile to determine the destination system. Then the sending system calls the function module INBOUND_IDOC_PROCESS asynchronously on the remote system and passes the Idoc via memory buffer.
Asynchronous Communication:
The data that is IDocs and the function module are stored in ARFCDATA and ARFCSSTATE tables. The function module ARFC_DEST_SHIP will transports data to target System and the program ARFC_EXCUTE will execute the stored function Module. If communication problem occurs RSARFCSE program is automatically scheduled., if successful, entries in the tables ARFCSSTATE and ARFCDATA will be deleted.
Inbound Process:
The INBOUND_IDOC_PROCESS program is triggered as a result of RFC from the Sending System, the Idoc to be sent is passed as parameter for the function module
In the partner profile if Process immediately is selected then RBDAPP01 program is executed. It will read the process code(MATM) from the Partner profile, which in turn invoke the function module IDOC_INPUT_MATMAS for MATMAS
Function module will call the corresponding SAP transaction using call transaction or uses direct programs to convert the Idoc to Application document .
In the table TBD51 there will be entries to find which option is used.
Transactions:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 Generate Partner Profiles
BD61 Activate Change Pointers - Globally
BD50 Activate Change Pointer for Msg Type
BD52 Activate change pointer per change.doc object
BD59 Allocation object type -> IDOC type
BD56 Maintain IDOC Segment Filters
BD53 Reduction of Message Types
BD21 Select Change Pointer
BD87 Status Monitor for ALE Messages
SALE Display ALE Customizing WEDI - ALE IDoc Administration
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
<b>EDI</b>
EDI(Electronic Data Interchange )
RFC DESTINATION:
A logical name used to identify the remote system on which a function needs to be executed.
Partner Profile:
It defines the characteristics of data being exchanged with the business partner.
Partner Function:
Role of the partner Eg:Ship-to-party,bill-to-party,etc in EDI and in ALE legacy system or remote SAP system.
Partner type:
The type of your business partner .
EDI KU/LI
ALE -- LS.
Archiving:
-Need to archive the important transmitted document
-Created in SARA
-Assigned in WE20.
PartnerProfile Tips:
RSECHK07- Consistency check for Partner Profile.
If you want to modify partner profile; copy it and then modify. If you cant modify it , u have to delete it.
To move partner profile to production system choose Partner -> Transport
Port defintion:
It defines the medium through which data is exchanged between systems.
tRFC - Used by ALE
FILe - Used by EDI
R/2 system system port For R/2 system
Internet port - to connect with internet applications
It also depends on the receiving side. If the receiving subsystem accepts tRFC, EDI also can use tRFC.
Remote Function modules required by Subsystem to send status and inbound idoc to SAP:
Startrfc - Program to execute RFC enabled Fun.mod. in SAP
EDI_DATA_INCOMING - To send data as inbound
EDI_STATUS_INCOMING - To send status to SAP
RSPARAM - To know the gateway service of the SAP system.
Message Control:
Output controller
A service program for determining the output type
To generate and manage various outputs from an application and control their medium and timing of exchange.
To retransmit the document without duplicating it
Procedure:
A procedure defines a set of possible outputs for an application
There may be more than one procedure but only one can be active
Requirement field in procedure specifies the condition which the sales docu. should reach,for sending the sales order response.
Output type:
Defines the characteristics and attributes of the output.
Access Sequence :
Defines a sequence in which the business rules are checked using condition record of the condition table for proposing output type.
Sapfans Q & A
SREL_GET_NEXT_RELATIONS -
Function Module that will provide me the number of the document that was created by an IDoc
RLSUB020
Program which uses the above function module.
Upgradation problem
When the old version program is upgraded in to newer version(4.0b  4.6c) the SE38 editor wont allow u get thru the programs normally to get rid of this.
Solution:
EDIT > MODIFICATION OPERATIONS > SWITCH OFF ASSISTANT. Hit Enter on the subsequently shown Warnings window. You should now be able to maintain the code as before.
When transporting the dialog program sometimes the links may be missing in the testing and production area. To overcome just check u have properly save your all includes and other stuff in the same request if not, do so. Other options In ver 4.6c -> Within ABAP editor try utilities/Update navigation index
this fixes the links
ALE( Application Link Enabling )
Disk Mirroring:
Changes occurring in the database should reflected to another disk that maintains a mirror image of the main disks contents.
Replicas:
Maintaining redundant data across multiple systems.
ALE:
It provides distributed environment to integrate non-SAP systems
Provides guaranteed delivery of data regardless of network problem to application.
Logical system :
The systems involved in distributed environment are assigned a logical name which uniquely identifies a system in a distributed environment.
Data Mapping:
Conversion of a business document in IDoc format to an EDI format (and vice versa) which is performed in the subsystem.
Message Types:
Represents a business function
Technical structure is the IDoc type
Or can say an instance of IDoc.
<b>IDoc :</b>
They are containers used to exchange data between any two process.
It represents an IDoc type and IDoc data
IDoc type is structure and IDoc data is an instance of it.
<b>Pls reward if helpful.</b> -
Respected Guys
I have an oracle-9i database connected with SAP and wants to transfer data from oracle9i database connected with SAP to an another oracle-9i database which is connected with a GPRS system.
Data about only sales has to be transfered from SAP to GPRS database (Oracle9i). I want to know the procudre of transfering data from SAP to GPRS database.
I know there is an Oracle9i Adapter which is used for this purpose. Anyone know about how to use the Idocs or ALE for this purpose.Or if anyone is aware of use of Oracle9i Adapeter. We are using Oralce9i with SAP4.6 and the database connected with GPRS is also oracle9i.
http://www.oracle.com/technology/products/integration/adapters/pdf/DS_OracleASAdapter_SAP.pdf
ThnxHi,
I checked the following document under the section: Adapter Features / Supported Versions and Platforms.
Oracle® Application Server Adapter for SAP User's Guide 10g Release 3 (10.1.3.1.0)
I could find that the SAP 6.0 is supported by the adapter that comes with OAS 10.1.3.1
Thanks,
Sasi Bhushan -
What is iDoc Adapter for XI?
I am working on XI and came to know that I have to use iDoc Adapter for the same. I want to know
1. What is an iDoc Adapter
2. How it is used for XI
3. How to configure the same
Thanks,
NishantHi Nishant,
Follow these steps................Here You can find the detailed decription...
ALE settings.
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
See the below links
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
IDOc testing - Generate Test Case for an IDOC Scenario
Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
File-XI-IDoc Scenario - File to Idoc
idoc settings Configuration steps required for posting idoc's(XI)
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idocs - /people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
idoc mapping - How to Support Industry Standards in XI (Part II of III) - Mapping
IDoc erros troubleshooting - Troubleshooting of ALE Process
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
see the below links to get more details about IDocs
ALE/ IDOC/ XML
Troubleshooting of ALE Process - Troubleshooting of ALE Process
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://help.sap.com/saphelp_srm30/helpdata/en/72/0fe1385bed2815e10000000a114084/content.htm
IDOC Convertion
Changing fields in an Idoc segment
Please check this online document for ALE and IDoc.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
serialization The specified item was not found.
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.henrikfrank.dk/abapexamples/IDOC/gl_postings2.htm
http://searchsap.techtarget.com/ sDefinition/0,,sid21_gci852485,00.html - 45k - Cached - Similar pages
Process codes in IDOC
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b806743d711d1893e0000e8323c4f/frameset.htm
http://edi.stylusstudio.com/msg04418.htm
Check this link to find out the difference b/w ALE,IDOC and BAPI
http://www.sap-img.com/abap/ale-bapi.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Introduction to IDoc-XI-File scenario and complete walk through for starters.
---Split messages :
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Have a look at this document, which explains the settings in IDOC-File scenario,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Regards,
Vinod. -
Stored procedure : how to call SP in sender JDBC adapter for mysql
HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojibHi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread -
Process flow of IDoc adapter in SAP PI
Hi Experts,
can any one pls send me about IDoc adapter in SAP PI/XI, which covers a complete info of IDoc adapter.
i mean complete in and out about IDoc adapter.
with rgds,
MFHi
If you do a search, you will get lots of material.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b2b4035c-0d01-0010-31b5-c470d3236afd
IDOC Adapter
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/idoc%252badapter
These links should help you out
Thanks
Saiyog -
Error in XI Sender JDBC adapter for AS/400 DB2
We are trying to connect to AS/400 DB2 from XI's Sender JDBC Adapter. we got the driver from DataDirect (connectjdbc.jar) and configured it within XI .The configuration according to the manual for this jar file is
// Register the driver with the driver manager
Class.forName("com.ddtek.jdbc.db2.DB2Driver");
// Establish the Connection
String url = "jdbc:datadirect:db2://corpserver1:50000;LocationName=ACCTNG";
Connection con = DriverManager.getConnection(url, "test04", "test04");
In XI we configured this as:
Driver = com.ddtek.jdbc.db2.DB2Driver
Connection = jdbc:datadirect:db2://servername;LocationName=NBHAGWAT
and specified the user id and password
<b>Note</b>: The Port Number is optional
When this was done in XI, we got the below error in the Adapter Monitoring:
Sender Adapter v2108 for Party '', Service 'JDBCtoFile':
Configured at 2006-12-19 15:45:31 MST
History:
- 2006-12-19 15:45:31 MST: Retry interval started. Length: 10.000 s
- 2006-12-19 15:45:31 MST: Error: Accessing database connection 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT': SAPClassNotFoundException: com.ddtek.jdbc.db2.DB2Driver
- 2006-12-19 15:45:31 MST: Processing started
Is this because there is something wrong because the way the connection string is specified.
Anybody who has configured XI Sender JDBC adapter for AS/400 DB2, please send us some information on this.
Thank you,
Regards,
Balaji> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>
Maybe you are looking for
-
Font is rendering in more bold appearance using jre 1.5 as compared to 1.4
When I am going to compile my application using jdk 1.4 and 1.5 both,in 1.5 fonts in my application component like frame,dialog fonts are appearing in different manner means in 1.5 it is appearing in bolder manner. We are developing framework applica
-
Rev. B iMac with noisy Combo Drive?
Just got a brand spankin' new iMac 1.8 17" with Combo drive. I put in a cd and ripped it using iTunes, but noticed that it sounded like my iMac was accellerating to Mach 2. The sound didn't seem out of the ordinary for what a drive would make, just a
-
Is font smoothing fixed in Leopard?
I am using a 24" Imac and one of my biggest issues with OSX is that font smoothing makes everything blurry...Especially on this machine as it has a larger dot pitch display. It can actually become painful after a while. My 15" Macbook pro is a lot be
-
I have a table which contains a list of enquiries that I receive. I have an 'Input_Date' field as a column. I have set up a page on my site on which to input two dates to search between for enquiries. One input field is called Start and the other End
-
Feathering a layer's edge - increasing intensity closer to the edge
I am working on a project where I need to make an office chair appear to have eyes. Specifically, dog eyes. I'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my