Sender is HTTP.how to configure Sender communication Channelfor HTTP

More Information about Configuration of HTTP sender

Hi Sridhar,
The plain HTTP adapter gives application system the option of communicating with the Integration Engine and exchanging business data using a plain HTTP connection.  Depending on the receiver system, outbound messages can be enhanced with certain information.
The plain HTTP adapter and IDOC adapter are the two which reside within the Integration Server (ABAP).
Therefore, you don't require a Sender Communication Channel for HTTP as well as IDOC adapters.
I hope this clarifies.
Regards.
Praveen

Similar Messages

  • How to configure receiver communication channel in File to mail scenario?

    Hi all,
            I'm working in FIle-to-Mail Scenario. I did all the required configuration In Integration repository. As per my Scenario whenever a text file stored in Application server of the R/3 system. it should be sent as a attchment with a mail.so i set a sender communication channel with file adapter in sender R/3 system . i dont know which business system should i refer for my receiver communication channel.because my receiver end is  a mail server. should i create any third party business system for this one?
    can anyone suggest me to define a receiver comm channel in a right manner?
    helpful answers will be rewarded.

    Hi,
    Check these
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
    Regards
    Seshagiri

  • How to Configure the Communication among Multiple OpenMQ Servers

    Hi,
    My application is distributed across multiple machines available in the LAN.
    Components running on one machine can only communicate to OpenMQ server running on same machine.
    I want to run OpenMQ server on all the machines where components of my application is running.
    I also want a way of communication between all OpenMQ servers so that OpenMQ server exchange messages among them to transfer message to destination component running on any of the machines in the LAN.
    How can i configure two OpenMQ servers to communicate each other?
    please help with sample configuration or example.
    Thanks & regards,
    Pawan Modi

    Hi Pawan,
    It sounds like you are asking how to configure a cluster of Open Message Queue brokers.
    There's a general explanation of broker clusters at
    [http://docs.sun.com/app/docs/doc/820-6424/aerdj?a=view|http://docs.sun.com/app/docs/doc/820-6424/aerdj?a=view]
    Details of how to configure them are given at
    [http://docs.sun.com/app/docs/doc/820-6740/aeohv?a=view|http://docs.sun.com/app/docs/doc/820-6740/aeohv?a=view]
    Nigel

  • How to Configure HTTPs sender communication in XI

    Hi,
    I have a request for new interface setup, in which i need to configure HTTPs sender communication from a B2B server to SAP system. Scenario is to receive XML 0rders from HTTPs B2B system and convert to Idoc and post it to SAP.
    Please could some one help on what needs to be done in XI for receiving XML order files from a HTTPs connection and what further needs to be done for processing to Idoc.
    Thanks in advance,

    HI,
    For testing purpose you can use the HTTP client and paste your payload.
    Refer the below pdf for HTTP client what you do is copy and paste the code in note pade and save as .html file.
    This link gives you a sample HTML code to create HTTP Client:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/66dadc6e-0a01-0010-9ea9-bb6d8ca48cc8
    Thnx
    Chirag Gohil

  • How to configure Sender IDOC adapter

    Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
    Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
    Regards,
    Ashish

    hi Goyal,
    Just check out this link.
    How to Configure IDOC
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    Regards
    Sachin

  • How to configure canon ir 2250 to send scans to emails via exchange server 2010

    Hello
    I have one question:
    How to configure canon ir 2250 to send scans to emails via exchange server 2010?

    Hi,
    Based on my research, the member limit of a distribution list depends on the scalability and performance of your environment:
    http://blogs.technet.com/b/exchange/archive/2009/02/19/3407003.aspx
    Thanks,
    Angela Shi
    TechNet Community Support

  • How to configure sender mail adapter

    Hi,
    My scenario  Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
    and can anyone suggest any blog as how to configure sender mail adapter.
    Kindly help
    Anu Singhal

    Hi Anu,
    Just check this link
    http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
    and this 1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
    Rewardif helpful
    Reagards
    Sachin

  • How to configure purchase requistion in third party sale pls send me detail

    dear expert
    how to configure purchase requistion in third party sale pls send me details. waiting your valuable reply
    vicky

    you can find the details in the below links
    Re: THird party sales complete scenario
    http://wiki.sdn.sap.com/wiki/display/ERPLO/PROCEDURETOCREATETHIRDPARTY+SALES
    http://www.sap-img.com/sap-sd/process-flow-for-3rd-party-sales.htm
    Regards

  • How can One sender communication channel pick two file from two location

    Hello
    I have a requirement that how can One sender communication channel pick two file from two location.Both the file has same name...How to configure the one receiver communication channel.i dont have any IR,no mapping..Please help me...

    >
    Soumitra Sinha wrote:
    > Hello Vijay
    > I already done the adapter specific message attribute.i am getting the file name properly.but that is nothing to do with my req.i am again clearing my problem:
    > i have two folder   folder a,folder b.Both has the same file credit0002. i have two destination folder i have one sender and one receiver channel.I dont have any IR.How one sender channel can  pick file from two location and how one receiver channel can put in two location.please help me..
    Ok now I get your requirement.
    you cant achieve this -  how one receiver channel can put in two location if you dont have a dynamic configuration defined i.e Adapter specific attributes.
    easy way - involve IR mapping
    else
    have a adapter module to define your dynamic configuration.
    Ref: /people/daniel.graversen/blog/2006/10/05/dynamic-configuration-in-adapter-modules & /people/michal.krawczyk2/blog/2006/10/09/xi-dynamic-configuration-in-adapter-modules--one-step-further
    Set the dynamic directory/file name etc for your receiver adapter.

  • How to configure JDBC Adapter(Sender & Receiver)

    How to configure JDBC Adapter(Sender & Receiver)
    Rgds
    Ruchitha

    Hi ruchitha thakur ,
    These r the following web-sites which give u detailed information about configuring of JDBC Adapter(Sender & Receiver)
    JDBC is a technical Adapter provided by SAP.
    Configuring the Sender JDBC Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
    Configuring the Receiver JDBC Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/676b3c255b1475e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d36d51d-0b01-0010-b3aa-9cb313b63cf4
    SAP XI Utilize SAP Adapters to connect to heterogenous systems
    https://wwwn.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3fc4bd90-0201-0010-68bd-ab931b06f9c2
    cheers!
    gyanaraj
    ***Pls reward points if u find this useful

  • Sender communication channel for  HTTP and IDOC

    Why the sender communication channel is not necessary for HTTP and IDOC

    Hi,
    Because they lie on ABAP stack ie on Integration Engine...so that they can process directly but other adapter lies on Adapter engine.
    Regards
    Hemant

  • How to configure OCS mail to send out s

    dear all,
    i have OCS R2 on Linux AS. i can send send/recive emials localy but we need to start send/recive email outside the domian to send to hotmail, yahoo...etc.
    i search alot and tried to configer the SMTP relay server but i am still not able to send emails outside domain
    plz help me with the steps needed
    regards

    Hello,
    Even i am facing the same problem as yours. I have no idea how to configure ocs to send mails out.Can you tell me if u got the solution . thank you

  • How to configure send mail ?

    Hi,
    How to configure send mail ?
    O/S is OEL-5.8 64-bit.
    Thanks.

    Sendmail uses the M4 macro processor to compile the configuration files. There is no GUI, if that is what you are looking for.
    The configuration depends on what you want to accomplish and how email needs be routed in your environment.
    You can find many tutorials and scenarios in Google:

  • How to execute data base view in sender communication channel  ?

    hi experts
    how execute data base view in sender communication channel.?
    when i execute select * from data base . ( Its working)
    When i execute select * from dbo.view (its showing error )
    My Question is there any procedure or syntax execute the views in sender side . ?
    Thanks and Regards
    G.Praveen Kumar

    The Error showing
    Database-level error reported by JDBC driver while executing statement 'select * from  View_abcMap'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'View_abcMap'.'. For details, contact your database server vendor

  • How to configure a Office 365 email on SAP BI 4.1SP05 server to send scheduled reports by email ?

    Hi All,
    I am trying to figure out how to configure office 365 server on BI platform so that I can send scheduled reports by Email.
    Below are the system details:
    SAP BI 4.1 SP05
    Microsoft Office 365 Email account
    I referred to the SCN post for configuring gmail.
    I could easily configure my gmail account.
    I tried same logic with Office 365. Instead of using port 465 (for gmail) I used port 995 (for office 365).
    That didnt work.
    I also tried using port 587 for TLS authentication but that doesnt work either.
    SMTP Link for office 365:  smtp.office365.com
    For simplicity purposes, I have opened all the ports on the firewall and server.
    Please let me know if I have missed anything or if my whole approach is incorrect ?
    I am open to suggestions and workarounds.
    Thanks,
    Prathmesh Pai

    Hi there,
    When the order is saved, the system will call the mail ID maintained in SU01 of the user.
    It will then trigger the mail to the regular outlook mailbox.
    Else in some cases a new Z table is defined to maintain the mail IDs. System will trigger the mail through outlook. It has that inbuilt capability.
    Just ask your user to check his mail box to see if he has received the mail.
    Regards,
    Sivanand

Maybe you are looking for

  • How do I transfer itunes library from one hard drive to another.

    I want to transfer all my itunes music from one external hard drive to another. How can I do this without disrupting itunes. Thanks.

  • Ideas for developing new Mini project

    Hi All, we want to develop our programming skill by doing some mini project in Java technology. A group of 3 members want to involve in this project with IDE as JDeveloper. So anyone can suggest a mini project with some 10 days duration. We are stron

  • Hp laserjet printer pro m1217 print file was not accepted Mac

    Hi  I connected my printer wirelessly via Bonjour. It is connected but for some reason doesn't print, giving me an error message: "print file was not accepted." Any help is greatly appreciated. David

  • Is there a way to batch change tags in folders?

    I am cleaning up from a data loss in one of my external HDD that held my photos.  I am trying to add tags to the recovered photos and was wondering if there was an easier way to do this other than selecting one photo at a time and adding the tag.  Wh

  • Adobe reader for j2me needed!

    I need a PDF reader for j2me (java mobile phones). There is MobilePDF from zesium but it doesn't work for complex PDF's. I vote for a j2me version original from Adobe.