Sender JDBC Adapter in a synchronous szenario

Hi,
i am trying to set up following szenario:
A JDBC Sender Adapter is polling data from a database, this data is beeing mapped to a synchronous RFC-Call to the R/3 backend. The result from the RFC-Call contains an order-number, which should be stored in the database.
The query of the DB and the rfc-call works fine. The query is also doing the UPDATE statement to the DB, marking this line of data as beeing processed.
The QOS in the sender-jdbc-adapter is set to "Best Effort", which should allow a synchronous communication.
I am mapping the response of the rfc-call to a jdbc-receiver-like structure, in the monitoring i can see the rfc-result and also the message to update the databae. There are no errors in the adapter-monitoring and everything looks fine, except that the database is not beeing updated.
Is there another messageformat for the synchronous answer to a sender-jdbc-adapter? Or is it possible, that the commit for the answer is not beeing sent?
We have an XI3.0 with SP16 installed.
Thanks for your help.
Ingo

hi,
you cannot use the Sender JDBC adapter to Upate.
Create a receibver JDBC adapter with the format as mentioned and use it to update the DB.
the steps in BPM wil be ,
1. Receive -- for Sender JDBC adapter
2- Send Synchronous -- RFC call synchrnous
3 - Send -- using Receievr JDBC adapter to Insert / Update the DB.
Do let me know if u need further info,
regards,
Bhavesh

Similar Messages

Sender JDBC adapter can be Synchronous?

Hi,
can we use sender JDBC adapter as synchronous in JDBC-XI-RFC Scenario without BPM?
thank you
babu

thank you for your reply.
Agasthuri,
that link doesn't explain about sender JDBC,it explains about reciever JDBC adapter and more over using BPM,I have asked without BPM.
Chandra
do you know how can we achieve this?please stick to my question sender JDBC-xi-RFC without BPM.
thank you again.
babu

Sender JDBC Adapter and Synchronous Interfaces

Hello
I have a Oracle/JDBC -> XI -> ECC/RFC scenario. The communication mode is Synchronous.
In the Oracle database I have a table with a "STATUS" field. When JDBC Adapter Sends the rows from this table to the Integration Engine, it updates the "STATUS" from "G" (GENERATED) to "R" (READ).
The response from the RFC contains for each row sent to RFC a "STATUS_from_RFC" field, that I would like to use to update Oracle STATUS field to "S" (SUCCESS) or "E" (ERROR).
Can the Sender JDBC Adapter use the response from the Synchronous RFC to update Oracle "STATUS" field itself ?
Or do I need a Receiver JDBC Adapter? In this case, I have to use asynchronous communication and BPM, ok ?
thanks
Julio

Bhavesh,
>>>But, the online help states it supports QOS of BE and so it does support Synchronous Processing.
Even File adapter has QOS of BE
To my understanding response back is possible only if it is PUSH + Sync
Adapters PUSH + Sync
HTTP
SOAP
RFC
XI
etc...
For the above response is possible
Adapter PULL + Sync
File
JDBC
etc..
In general there can be a response if there is a request. In the case of File and JDBC there is no request message coming to the adapter, its the adapter which is actually requesting.
This is just an idea and my understanding.. might not be true If possible do try it and let everyone know I will also give it a try when time permits
Thanks,
Prakash

Configuring sender jdbc adapter

Hi all,
I have a requirement in which i have to select certain data from Oracle table and send it to an IDOC via SAP XI.
Problem is the select can happen from several tables. For example:
SELECT col1,col2,col3 FROM <tablename>
The <tablename> has to be variable. I do not need to do any JOIN. At a time select will be only from a single table i.e. col1, col2, col3 will all belong to the same table. But the adapter should poll multiple tables.
One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
Pls can anybody provide me with a proper solution.
This requirement is a bit urgent.
Thanks in advance.
Regards
Neetu

Neetu,
You need to have the Table name dynamic in the Sender JDBC adapter's Select Query . This is not possible
You can consider using a Reciver JDBC adapter for which you can have a look at this blog ,
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
Or, you need a Separate sender JDBC adapter for every table to be polled.
>>One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
If you are using the Sender JDBC adapter, this would be simple using the UPDATE field of the Sender JDBC adapter .
If you are planning to use Receiver JDBC adapter, then You need a separate Send Step for this Update.
Better way to go would be to have separate sender JDBC adapters.
Regards,
Bhavesh

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Dynamic query configuration in sender jdbc adapter

Hi,
According my undertsnading in XI.3.0 dynamic query in sender JDBC adapter is not possible.
could any one confirms the possibility of this feature in XI 7.0 .
Thanks,
venu

Hi VJ,
sorry for late responding to your answer.
One of our requirements is the query statement that we write in sender communication channel should be changed dynamically, for example in where condition the condition parameters values required to change.
Thanks,
venu

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Problem in sender JDBC adapter

hello,
I am facing one typical problem in sender JDBC adapter.
Here is the issue,
JDBC API method getString threw an exception: java.sql.SQLException: Cursor state not valid.
Can anyone please help me out in solving this problem?
Actually after a retry of 3 times the message has been successfully sent. Till then i am getting these error
On 1st attempt ,
Error during conversion of query result to XML java.sql.SQLException: Cursor state not valid
On 2nd attempt,
Error during conversion of query result to XML java.sql.SQLException: Internal driver error
(class.java.lang.InterruptedException)
On 3rd attempt,
Processing finished successfully.
This is the scenario that i can see in the audit log.
Can you please help me out in solving this issue.
Thanks,
Soorya

Hi gaurav,
It was a good response from your side.
I have gone through the FAQ but could not able to find anything.
Can you please help me out in this regard ?
Also i am using select query of this kind,
SELECT
SEFVHRC.VHRBRCD,SEFVHRC.VHRCUCD,SEFVHRC.VHRVIN,SEFVHRC.VHRMOCD,SEFVHRC.VHRCHAS,
SEFVHRC.VHRSLOR,SEFVHRC.VHRDIVI,SEFVHRC.VHRMGCD,SEFVHRC.VHRMOCH,SEFVHRC.VHRVHTY,
SEFVHRC.VHRBDTY,SEFVHRC.VHRMFYR,SEFVHRC.VHRMOYR,SEFVHRC.VHRMODS,
SEFVHRC.VHRMDTL,SEFVHRC.VHRCLBR,SEFVHRC.VHRRCID,SEFVHRC.VHRARDT,
SEFVHRC.VHRLUTM,SEFVHRC.VHRLUDT,SEFVHRC.VHRKEYN,SEFVHRC.VHRCTORN,
SEFVHRC.VHRCTIMP,SEFVHRC.VHRPRDT,SEFVHRC.VHRPRDT,SEFVHRC.VHRRCDT,
SEFVHFT.VHFCLCD,SEFVHFT.VHFCAT,SEFVHFT.VHFCADSC,SEFVHFT.VHFKEY,SEFVHFT.VHFTEXT1,
SEFVHFT.VHFTEXT2,SEFVHFT.VHFTEXT3,SEFVHFT.VHFTEXT4
FROM
SAPTESTLIB.SEFVHRC,SAPTESTLIB.SEFVHFT
WHERE
SEFVHRC.VHRVIN = SEFVHFT.VHFVIN AND SEFVHRC.VHRSTTS = ' '
and update query of this kind,
Update SEFVHRC SET VHRSTTS = 'R' WHERE VHRSTTS = ' '
I am using prity big select query. is there any option to optimize it?
Can you please help me out in solving this problem
urs,
Soorya

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

We get "uFF06uFF03x0;" from sender JDBC adapter

Thank you.
This is naoki kurihara.
We have a problem in sender JDBC adapter.
We use java mapping and sender JDBC adapter in PI7.1 on Windows.(DB is sqlserver)
and we test the interface and we found error.
the reason is to get "＆＃x0;" from JDBC adapter.
and our java mapping can't parse it. and we got error.
the column is not null.
how we can prevent "＆＃x0;",
(sorry I cant write "＆＃" 1byte word, so I wrote 2bytes word)
please give me your help!!
Thanks

Hi,
Replace the & character with &amp ; in your java mapping. The same goes for these special characters:
< with &lt ;
> with &gt ;
" with &quot ;
' with &apos ;
Please remove the space between the escape character and the ; in your Java mapping. The spaces are typed here because the equivalent characters are not displaying correctly.
It should be able to handle the # though. Hope this helps
Regards,
Mark

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

Error in XI Sender JDBC adapter for AS/400 DB2

We are trying to connect to AS/400 DB2 from XI's Sender JDBC Adapter. we got the driver from DataDirect (connectjdbc.jar) and configured it within XI .The configuration according to the manual for this jar file is
// Register the driver with the driver manager
Class.forName("com.ddtek.jdbc.db2.DB2Driver");
// Establish the Connection
String url = "jdbc:datadirect:db2://corpserver1:50000;LocationName=ACCTNG";
Connection con = DriverManager.getConnection(url, "test04", "test04");
In XI we configured this as:
Driver = com.ddtek.jdbc.db2.DB2Driver
Connection = jdbc:datadirect:db2://servername;LocationName=NBHAGWAT
and specified the user id and password
Note: The Port Number is optional
When this was done in XI, we got the below error in the Adapter Monitoring:
Sender Adapter v2108 for Party '', Service 'JDBCtoFile':
Configured at 2006-12-19 15:45:31 MST
History:
- 2006-12-19 15:45:31 MST: Retry interval started. Length: 10.000 s
- 2006-12-19 15:45:31 MST: Error: Accessing database connection 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT' failed: DriverManagerException: Cannot establish connection to URL 'jdbc:datadirect:db2://AS400a;LocationName=NBHAGWAT': SAPClassNotFoundException: com.ddtek.jdbc.db2.DB2Driver
- 2006-12-19 15:45:31 MST: Processing started
Is this because there is something wrong because the way the connection string is specified.
Anybody who has configured XI Sender JDBC adapter for AS/400 DB2, please send us some information on this.
Thank you,
Regards,
Balaji

> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>

Sender JDBC adapter...problem

Hi,
the real problem is Sender JDBC adapter sends data in following format.
<?xml version="1.0" encoding="UTF-8"?>
<resultset>
<row>
 <Associate_ID>16444</Associate_ID>
 <Associate_Name>Sudhir</Associate_Name>
 <Status>false</Status>
</row>
</resultset>
But in Design time mapping...structure of source message will be like
<?xml version="1.0" encoding="UTF-8"?>
<ns5:DB2File_DB_MT xmlns:ns5="urn:db2file">
<Resultset>
 <Row>
 <Associate_ID>16444</Associate_ID>
 <Associate_Name>Sudhir</Associate_Name>
 <Status>false</Status>
 </Row>
</Resultset>
</ns5:DB2File_DB_MT>
How does this tag ... <ns5:DB2File_DB_MT xmlns:ns5="urn:db2file"> get generated in runtime
and apart from 1 to 1 mappings b/w the three fields above in the row tag...wt other mappings to be performed
Pls help...
Sunita

Hi Sunita,
what i understood from your query is namespace tag is coming while message mapping. This namespace can be avoided in the message type if you keep the XML namespace field empty while creating message type. But i afraid you have to do the message mapping again.
Regards,
Satish

Sender JDBC Adapter - Stored procedure

Hello all, I just read a lot of topics in this forum about this subject.
I found two indications in contracdictions in the documentation :<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">Configuring the Sender JDBC Adapter</a>
1. Concerning Query SQL Statement
You have the following options:
● Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
● Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
2. Concerning Update SQL Statement :
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.
It is ambigous, isn't it ?
My question is simple :
Does somebody already use Sender JDBC Adapter with Stored procedure as Select statement including many steps :
- update actions on database
- select query to return data to XI adapter
(Update statement stay empty or with value <TEST>.
To provide more information, I have a reference table to read. But this reference table must be updated by a stored procedure before being able to be read accordingly.
So As I can't do both process with Sender Adapter (call a procedure and execute a select statement) => I want to include both actions (updates and select) in an alone stored procedure.
Could I get wanted data as a resultset ?

Hi,
>>Update statement stay empty or with value <TEST>.
It should be <TEST> if you do not want an Update to happen.
Regarding Sender JDBC adapter with stored procedures, which DB are you trying to access. Sender JDBC adapter does not support Oracle Stored Procedures as they return Cursors and Sender JDBC adapter can deal with only Resultset.
As for executing both Update and Select in the SP, though I havent tried, this should surely be possible.
Regards,
Bhavesh

Sender JDBC Adapter in a synchronous szenario

Similar Messages

Maybe you are looking for