Sender JDBC adapter : Update SQL Statement : stored procedure

Hi,
Can we use a stored procedure in the sender jdbc adapter in 'Update SQL Statement'.
The problem i am facing is like, we are selecting data from two tables in 'SQL statement for query' and then in 'Update SQL Statement' , we need to delete that data from these two tables.
Please let me know if it is possible.
Thanks,
Rohit

you can use a Stored procedure in the
Query SQL Statement
You have the following options:
· Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
· Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
so have your whole select and update as part of this single Stored procedure

Similar Messages

Sender JDBC adapter -- Update SQL statement NOT work for the last record

I'm trying to use SAP XI to send records from Oracle database to As/400 using JDBC adapter. I've defined the communication channel for sender
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE NOT CU_ACTION_CD='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE NOT CU_ACTION_CD='P'
Supposed that 3 records were retrieved from (1) and successfully updated to AS/400 but only the first 2 records in Oracle database are updated according to (2)
Any advise.
Pansy

Hi Pansy,
You select and update query is looking like wrong
kindly check below query,If you are using oracle
(1) The "Query SQL statement" = select a_bgn_dt, a_end_dt from PX_PXXD WHERE CU_ACTION_CD !='P'
(2) The "Update SQL statement" = update PX_PXXD set CU_ACTION_CD='P' WHERE CU_ACTION_CD !='P'
Thank you
Sateesh

JDBC Adapter - Update SQL Statement - Timestamp

Hi All,
I'm using a JDBC Sender channel to bring information from a database, when I bring the data I want to UPDATE a field inserting the date and time (timestamp) when you got the info.
Sender Communication Channel: JDBC
Query SQL Statement: SELECT * FROM PI_Factory
Update SQL Statement: ????????
Could you tell me how to do this?

Hi
please try the below query in Update sql statement
update table_name set fieldname = systimestamp where .....
or
update table_name set fieldname = current_timestamp where .....
Regards
Ramg.

Xi JDBC Adapter - Query SQL Statement & Update SQL Statement

Hi!
I configure the JDBC adapter sender (XI) to take data from Oracle database.
I set the Query and Update SQL Statement in the Processing parameters of the communication channel in this way:
Query SQL Statement :
SELECT * FROM XI_TABLE WHERE STATUS = 'WAIT' ORDER BY ROW_NUM
Update SQL Statement :
UPDATE XI_TABLE SET STATUS = 'DONE', DATE = SYSDATE WHERE STATUS = 'WAIT'
My question is :
If a new record with the field STATUS = 'WAIT' is added to the table (xi_table) during the time between the execution of the query statement and the start of the update statement, what will happen to that record during the update?
There is a way to avoid the update of that record? or to pass to the update statement only the record selected in the query statement?
Please, may you give me some example?
Thanks,
Francesco

hi,
did you check "Isolation Level for Transaction"
for the sender jdbc adapter?
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
Regards,
michal

Sender JDBC Communication Update SQL Command Problem!

Hi all,
I am trying to do a SENDER JDBC Scenario in XI.
I fetch the Records from the table Once per day based on the Current Date.
I do not have any Update Credentials in the table.
I can only perform Select Querry.
But when i am trying to configure the SENDER JDBC Channel its asking me to enter value for Update SQL Command in Sender JDBC communication channel Process Parameters.
Its not accepting BLANK or ' * ' Values.
But i have only Select Querry credentials in the table. I can only pick the values cant Update the tables but.
In the Above scenario how can i configure the Sender JDBC CC without Updating the Table after fetching the value?
Please Advice
Regards,
Senthilprakash.

Hi,
Specify the Update SQL Statement value as .
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Thanks
SaNv...
Edited by: Sãnthosh Kûmãr V on Oct 8, 2008 10:44 AM
Edited by: Sãnthosh Kûmãr V on Oct 8, 2008 10:45 AM

Jdbc adapter log sql statement to file

Hi,
I'm using a Proxy to Jdbc scenario.
In the Adapter Configuration the logSQLStatement is set to true.
Is it possible to log the sql statement shown in the Audit to a file?
Regards Ralf

Hi
please try the below query in Update sql statement
update table_name set fieldname = systimestamp where .....
or
update table_name set fieldname = current_timestamp where .....
Regards
Ramg.

Synchronous JDBC adapter(receiver side) with stored procedure

Hi experts,
Can some database processing logic be included in receiver JDBC (synchronous) adapter...to put it simply
I have synchronous JDBC adapter in the receiver side..Using this JDBC adapter I want to get some response back from the table..
The requirement is not a simple fetch from the table..It involves some processing in the database side which I guess will be done by stored procedure..After this database processing , this output will be picked up by the JDBC adapter and will send to PI.
How can this be achived ..Any Blog..
Thanks
Ayan

Yes u can use stroed procedure and send back the response,
refer this link for stored procedure structure.
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
chirag.

Sender JDBC Adapter Supports Stored Procedures????

Dear All,
I was trying to use the Sender JDBC adapter to call the Stored procedure in the Sender JDBC adapter is possible to do this???
I don't think Sender JDBC Adapter is supported to execute the Oracle Started Procedures. With my understanding only the Receiver JDBC Adapter will supported for the Stored Procedures using the message mapping Action = EXECUTE and Table = DBO.EmployeeMasterTable.
Please let me know how to achieve the below scenario.
My Scenario JDBC to RFC
Query SQL Statement:
select * from dbo.emp where flag = 'Insert' or flag = 'Update' or flag = 'Delete'
Update SQL Statement:
UPDATE dbo.emp SET flag = null WHERE flag IN ('Insert', 'Update');
DELETE dbo.emp WHERE flag = 'Delete';
In the my update statement I need to update few data flag with Insert , Update and need to delete the of the old records as mentioned above the query.
In the response mapping I am using the Action = INSERT and Table = emp.
Thanks,
Jane F.

Hi Jane,
>>My requirment is to select from the DB and update and delete needs to be done. How I need to call this stored procedure in Sender JDBC adapter.
An example of SP call is mentioned in the previous note Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities
SP Code
          ---------- pkg1 ----------
CREATE PACKAGE pkg1 AS
TYPE numset_t IS TABLE OF NUMBER;
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED;
END pkg1;
CREATE PACKAGE BODY pkg1 AS
-- FUNCTION f1 returns a collection of elements (1,2,3,... x)
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED IS
BEGIN
    FOR i IN 1..x LOOP
      PIPE ROW(i);
    END LOOP;
    RETURN;
END;
END pkg1;
In sender channel mention
>> SELECT * FROM TABLE(pkg1.f1(5));
>>Is this need to be in the one stored procedure right. Can ou let me know how it should be handled in JDBC Adapter.
Yes it shoudl be a single SP. Mention a select statement as given in above example.
What is your Oracle version?
Regards
Suraj

Update SQL statement, date possibilities

All,
Is it possible to format the date in the update sql statement of the sender JDBC adapter ?
the statement curdate() returns the date in this format 09-02-04.
But, I would like to have it in this format 20090204.
this is my update statement
UPDATE table SET status = 'X', date = curdate()
Anybody knows how to do this or via something else than curdate()
Michel

Hi Michel,
I am sorry i misunderstood the question.. how are you getting the data from curdate() may i ask. What exactly is curdate()?
Is it a field in the database that you are retrieving?
What you could do is create another dummy field and maitain the current date in that field, in the format you want it to. Then you could use that field in the update statement as tableName.fieldName.
Use this to manage your date checks. Only that you would have to modify the date in the database every day.
Regards,
Kshitij
Edited by: Kshitij Sharma on Feb 4, 2009 9:31 AM
Edited by: Kshitij Sharma on Feb 4, 2009 9:36 AM

Update sql statement in sender/receiver jdbc adapter

Hi
What is the update sql statement we give in the sender/ receiver adapter when
1) SELECT statement was written in query sql statement
2) EXECUTE statement was written for a stored procedure in query sql statement
thanks
Anitha

> 1) SELECT statement was written in query sql statement
your table should have some value "already_processed" which prevents a second processing of that table.
the update statement sets that value.
> 2) EXECUTE statement was written for a stored procedure in query sql statement
the same as above.
when your stored procedure already does the update, then write a second stored procedure which does nothing.

JDBC sender adapter, ...Processing parameters, Update SQL statement

in JDBC sender adapter, ...Processing parameters, there is an Update SQL statement field, can u tell me ...why this is required,,,,,and in one of the example scenario...it was given as <TEST>..

Sudheep,
In the sender JDBC adapter you have the select query to select data from the database.
Let us summer 2 cases,
1. You have <test> in the UPDATE . In this case, during every polling interval the JDBC adapter will end up selecting the same data from the Database. This would not be needed in most f the cases. Why would you want to select the same data over an over again?
2. If you have an update Statement in the Update field you can make sure that the data selected in the selected statement is updated so that the same rows are not selected again.
Take a look at this blog,
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
Regards
Bhavesh

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Sender JDBC Adapter - Stored procedure

Hello all, I just read a lot of topics in this forum about this subject.
I found two indications in contracdictions in the documentation :<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">Configuring the Sender JDBC Adapter</a>
1. Concerning Query SQL Statement
You have the following options:
● Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
● Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
2. Concerning Update SQL Statement :
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.
It is ambigous, isn't it ?
My question is simple :
Does somebody already use Sender JDBC Adapter with Stored procedure as Select statement including many steps :
- update actions on database
- select query to return data to XI adapter
(Update statement stay empty or with value <TEST>.
To provide more information, I have a reference table to read. But this reference table must be updated by a stored procedure before being able to be read accordingly.
So As I can't do both process with Sender Adapter (call a procedure and execute a select statement) => I want to include both actions (updates and select) in an alone stored procedure.
Could I get wanted data as a resultset ?

Hi,
>><i>Update statement stay empty or with value <TEST>.</i>
It should be <TEST> if you do not want an Update to happen.
Regarding Sender JDBC adapter with stored procedures, which DB are you trying to access. Sender JDBC adapter does not support Oracle Stored Procedures as they return Cursors and Sender JDBC adapter can deal with only Resultset.
As for executing both Update and Select in the SP, though I havent tried, this should surely be possible.
Regards,
Bhavesh

Sender JDBC adapter : Update SQL Statement : stored procedure

Similar Messages

Maybe you are looking for